Add m-esr52 at 52.6.0

1 files changed, 860 insertions, 0 deletions

diff --git a/dom/media/MediaDecoderStateMachine.h b/dom/media/MediaDecoderStateMachine.h
new file mode 100644
index 0000000000..a61fe13d2a
--- /dev/null
+++ b/dom/media/MediaDecoderStateMachine.h
@@ -0,0 +1,860 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* vim:set ts=2 sw=2 sts=2 et cindent: */
+/* This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/. */
+/*
+
+Each media element for a media file has one thread called the "audio thread".
+
+The audio thread  writes the decoded audio data to the audio
+hardware. This is done in a separate thread to ensure that the
+audio hardware gets a constant stream of data without
+interruption due to decoding or display. At some point
+AudioStream will be refactored to have a callback interface
+where it asks for data and this thread will no longer be
+needed.
+
+The element/state machine also has a TaskQueue which runs in a
+SharedThreadPool that is shared with all other elements/decoders. The state
+machine dispatches tasks to this to call into the MediaDecoderReader to
+request decoded audio or video data. The Reader will callback with decoded
+sampled when it has them available, and the state machine places the decoded
+samples into its queues for the consuming threads to pull from.
+
+The MediaDecoderReader can choose to decode asynchronously, or synchronously
+and return requested samples synchronously inside it's Request*Data()
+functions via callback. Asynchronous decoding is preferred, and should be
+used for any new readers.
+
+Synchronisation of state between the thread is done via a monitor owned
+by MediaDecoder.
+
+The lifetime of the audio thread is controlled by the state machine when
+it runs on the shared state machine thread. When playback needs to occur
+the audio thread is created and an event dispatched to run it. The audio
+thread exits when audio playback is completed or no longer required.
+
+A/V synchronisation is handled by the state machine. It examines the audio
+playback time and compares this to the next frame in the queue of video
+frames. If it is time to play the video frame it is then displayed, otherwise
+it schedules the state machine to run again at the time of the next frame.
+
+Frame skipping is done in the following ways:
+
+  1) The state machine will skip all frames in the video queue whose
+     display time is less than the current audio time. This ensures
+     the correct frame for the current time is always displayed.
+
+  2) The decode tasks will stop decoding interframes and read to the
+     next keyframe if it determines that decoding the remaining
+     interframes will cause playback issues. It detects this by:
+       a) If the amount of audio data in the audio queue drops
+          below a threshold whereby audio may start to skip.
+       b) If the video queue drops below a threshold where it
+          will be decoding video data that won't be displayed due
+          to the decode thread dropping the frame immediately.
+     TODO: In future we should only do this when the Reader is decoding
+           synchronously.
+
+When hardware accelerated graphics is not available, YCbCr conversion
+is done on the decode task queue when video frames are decoded.
+
+The decode task queue pushes decoded audio and videos frames into two
+separate queues - one for audio and one for video. These are kept
+separate to make it easy to constantly feed audio data to the audio
+hardware while allowing frame skipping of video data. These queues are
+threadsafe, and neither the decode, audio, or state machine should
+be able to monopolize them, and cause starvation of the other threads.
+
+Both queues are bounded by a maximum size. When this size is reached
+the decode tasks will no longer request video or audio depending on the
+queue that has reached the threshold. If both queues are full, no more
+decode tasks will be dispatched to the decode task queue, so other
+decoders will have an opportunity to run.
+
+During playback the audio thread will be idle (via a Wait() on the
+monitor) if the audio queue is empty. Otherwise it constantly pops
+audio data off the queue and plays it with a blocking write to the audio
+hardware (via AudioStream).
+
+*/
+#if !defined(MediaDecoderStateMachine_h__)
+#define MediaDecoderStateMachine_h__
+
+#include "mozilla/Attributes.h"
+#include "mozilla/ReentrantMonitor.h"
+#include "mozilla/StateMirroring.h"
+
+#include "nsAutoPtr.h"
+#include "nsThreadUtils.h"
+#include "MediaDecoder.h"
+#include "MediaDecoderReader.h"
+#include "MediaDecoderOwner.h"
+#include "MediaEventSource.h"
+#include "MediaMetadataManager.h"
+#include "MediaStatistics.h"
+#include "MediaTimer.h"
+#include "ImageContainer.h"
+#include "SeekJob.h"
+#include "SeekTask.h"
+#include "MediaDecoderReaderWrapper.h"
+
+namespace mozilla {
+
+namespace media {
+class MediaSink;
+}
+
+class AudioSegment;
+class DecodedStream;
+class MediaDecoderReaderWrapper;
+class OutputStreamManager;
+class TaskQueue;
+
+extern LazyLogModule gMediaDecoderLog;
+extern LazyLogModule gMediaSampleLog;
+
+enum class MediaEventType : int8_t {
+  PlaybackStarted,
+  PlaybackStopped,
+  PlaybackEnded,
+  SeekStarted,
+  Invalidate,
+  EnterVideoSuspend,
+  ExitVideoSuspend
+};
+
+/*
+  The state machine class. This manages the decoding and seeking in the
+  MediaDecoderReader on the decode task queue, and A/V sync on the shared
+  state machine thread, and controls the audio "push" thread.
+
+  All internal state is synchronised via the decoder monitor. State changes
+  are propagated by scheduling the state machine to run another cycle on the
+  shared state machine thread.
+
+  See MediaDecoder.h for more details.
+*/
+class MediaDecoderStateMachine
+{
+  NS_INLINE_DECL_THREADSAFE_REFCOUNTING(MediaDecoderStateMachine)
+
+  using TrackSet = MediaDecoderReader::TrackSet;
+
+public:
+  typedef MediaDecoderOwner::NextFrameStatus NextFrameStatus;
+  typedef mozilla::layers::ImageContainer::FrameID FrameID;
+  MediaDecoderStateMachine(MediaDecoder* aDecoder,
+                           MediaDecoderReader* aReader);
+
+  nsresult Init(MediaDecoder* aDecoder);
+
+  void SetMediaDecoderReaderWrapperCallback();
+  void CancelMediaDecoderReaderWrapperCallback();
+
+  // Enumeration for the valid decoding states
+  enum State {
+    DECODER_STATE_DECODING_METADATA,
+    DECODER_STATE_WAIT_FOR_CDM,
+    DECODER_STATE_DORMANT,
+    DECODER_STATE_DECODING_FIRSTFRAME,
+    DECODER_STATE_DECODING,
+    DECODER_STATE_SEEKING,
+    DECODER_STATE_BUFFERING,
+    DECODER_STATE_COMPLETED,
+    DECODER_STATE_SHUTDOWN
+  };
+
+  void DumpDebugInfo();
+
+  void AddOutputStream(ProcessedMediaStream* aStream, bool aFinishWhenEnded);
+  // Remove an output stream added with AddOutputStream.
+  void RemoveOutputStream(MediaStream* aStream);
+
+  // Seeks to the decoder to aTarget asynchronously.
+  RefPtr<MediaDecoder::SeekPromise> InvokeSeek(SeekTarget aTarget);
+
+  void DispatchSetPlaybackRate(double aPlaybackRate)
+  {
+    OwnerThread()->DispatchStateChange(NewRunnableMethod<double>(
+      this, &MediaDecoderStateMachine::SetPlaybackRate, aPlaybackRate));
+  }
+
+  RefPtr<ShutdownPromise> BeginShutdown();
+
+  // Notifies the state machine that should minimize the number of samples
+  // decoded we preroll, until playback starts. The first time playback starts
+  // the state machine is free to return to prerolling normally. Note
+  // "prerolling" in this context refers to when we decode and buffer decoded
+  // samples in advance of when they're needed for playback.
+  void DispatchMinimizePrerollUntilPlaybackStarts()
+  {
+    RefPtr<MediaDecoderStateMachine> self = this;
+    nsCOMPtr<nsIRunnable> r = NS_NewRunnableFunction([self] () -> void
+    {
+      MOZ_ASSERT(self->OnTaskQueue());
+      self->mMinimizePreroll = true;
+
+      // Make sure that this arrives before playback starts, otherwise this won't
+      // have the intended effect.
+      MOZ_DIAGNOSTIC_ASSERT(self->mPlayState == MediaDecoder::PLAY_STATE_LOADING);
+    });
+    OwnerThread()->Dispatch(r.forget());
+  }
+
+  // Set the media fragment end time. aEndTime is in microseconds.
+  void DispatchSetFragmentEndTime(int64_t aEndTime)
+  {
+    RefPtr<MediaDecoderStateMachine> self = this;
+    nsCOMPtr<nsIRunnable> r = NS_NewRunnableFunction([self, aEndTime] () {
+      self->mFragmentEndTime = aEndTime;
+    });
+    OwnerThread()->Dispatch(r.forget());
+  }
+
+  void DispatchAudioOffloading(bool aAudioOffloading)
+  {
+    RefPtr<MediaDecoderStateMachine> self = this;
+    nsCOMPtr<nsIRunnable> r = NS_NewRunnableFunction([=] () {
+      if (self->mAudioOffloading != aAudioOffloading) {
+        self->mAudioOffloading = aAudioOffloading;
+        self->ScheduleStateMachine();
+      }
+    });
+    OwnerThread()->Dispatch(r.forget());
+  }
+
+  // Drop reference to mResource. Only called during shutdown dance.
+  void BreakCycles() {
+    MOZ_ASSERT(NS_IsMainThread());
+    mResource = nullptr;
+  }
+
+  TimedMetadataEventSource& TimedMetadataEvent() {
+    return mMetadataManager.TimedMetadataEvent();
+  }
+
+  MediaEventSource<void>& OnMediaNotSeekable() const;
+
+  MediaEventSourceExc<nsAutoPtr<MediaInfo>,
+                      nsAutoPtr<MetadataTags>,
+                      MediaDecoderEventVisibility>&
+  MetadataLoadedEvent() { return mMetadataLoadedEvent; }
+
+  MediaEventSourceExc<nsAutoPtr<MediaInfo>,
+                      MediaDecoderEventVisibility>&
+  FirstFrameLoadedEvent() { return mFirstFrameLoadedEvent; }
+
+  MediaEventSource<MediaEventType>&
+  OnPlaybackEvent() { return mOnPlaybackEvent; }
+  MediaEventSource<MediaResult>&
+  OnPlaybackErrorEvent() { return mOnPlaybackErrorEvent; }
+
+  MediaEventSource<DecoderDoctorEvent>&
+  OnDecoderDoctorEvent() { return mOnDecoderDoctorEvent; }
+
+  size_t SizeOfVideoQueue() const;
+
+  size_t SizeOfAudioQueue() const;
+
+private:
+  class StateObject;
+  class DecodeMetadataState;
+  class WaitForCDMState;
+  class DormantState;
+  class DecodingFirstFrameState;
+  class DecodingState;
+  class SeekingState;
+  class BufferingState;
+  class CompletedState;
+  class ShutdownState;
+
+  static const char* ToStateStr(State aState);
+  static const char* ToStr(NextFrameStatus aStatus);
+  const char* ToStateStr();
+
+  // Functions used by assertions to ensure we're calling things
+  // on the appropriate threads.
+  bool OnTaskQueue() const;
+
+  // Initialization that needs to happen on the task queue. This is the first
+  // task that gets run on the task queue, and is dispatched from the MDSM
+  // constructor immediately after the task queue is created.
+  void InitializationTask(MediaDecoder* aDecoder);
+
+  void SetAudioCaptured(bool aCaptured);
+
+  RefPtr<MediaDecoder::SeekPromise> Seek(SeekTarget aTarget);
+
+  RefPtr<ShutdownPromise> Shutdown();
+
+  RefPtr<ShutdownPromise> FinishShutdown();
+
+  // Update the playback position. This can result in a timeupdate event
+  // and an invalidate of the frame being dispatched asynchronously if
+  // there is no such event currently queued.
+  // Only called on the decoder thread. Must be called with
+  // the decode monitor held.
+  void UpdatePlaybackPosition(int64_t aTime);
+
+  bool CanPlayThrough();
+
+  MediaStatistics GetStatistics();
+
+  bool HasAudio() const { return mInfo.ref().HasAudio(); }
+  bool HasVideo() const { return mInfo.ref().HasVideo(); }
+  const MediaInfo& Info() const { return mInfo.ref(); }
+
+  // Returns the state machine task queue.
+  TaskQueue* OwnerThread() const { return mTaskQueue; }
+
+  // Schedules the shared state machine thread to run the state machine.
+  void ScheduleStateMachine();
+
+  // Invokes ScheduleStateMachine to run in |aMicroseconds| microseconds,
+  // unless it's already scheduled to run earlier, in which case the
+  // request is discarded.
+  void ScheduleStateMachineIn(int64_t aMicroseconds);
+
+  bool HaveEnoughDecodedAudio();
+  bool HaveEnoughDecodedVideo();
+
+  // True if shutdown process has begun.
+  bool IsShutdown() const;
+
+  // Returns true if we're currently playing. The decoder monitor must
+  // be held.
+  bool IsPlaying() const;
+
+  // TODO: Those callback function may receive demuxed-only data.
+  // Need to figure out a suitable API name for this case.
+  void OnAudioDecoded(MediaData* aAudio);
+  void OnVideoDecoded(MediaData* aVideo, TimeStamp aDecodeStartTime);
+  void OnNotDecoded(MediaData::Type aType, const MediaResult& aError);
+
+  // Resets all state related to decoding and playback, emptying all buffers
+  // and aborting all pending operations on the decode task queue.
+  void Reset(TrackSet aTracks = TrackSet(TrackInfo::kAudioTrack,
+                                         TrackInfo::kVideoTrack));
+  // Sets mMediaSeekable to false.
+  void SetMediaNotSeekable();
+
+  void OnAudioCallback(AudioCallbackData aData);
+  void OnVideoCallback(VideoCallbackData aData);
+  void OnAudioWaitCallback(WaitCallbackData aData);
+  void OnVideoWaitCallback(WaitCallbackData aData);
+
+protected:
+  virtual ~MediaDecoderStateMachine();
+
+  void BufferedRangeUpdated();
+
+  void ReaderSuspendedChanged();
+
+  // Inserts MediaData* samples into their respective MediaQueues.
+  // aSample must not be null.
+
+  void Push(MediaData* aSample, MediaData::Type aSampleType);
+
+  void OnAudioPopped(const RefPtr<MediaData>& aSample);
+  void OnVideoPopped(const RefPtr<MediaData>& aSample);
+
+  void AudioAudibleChanged(bool aAudible);
+
+  void VolumeChanged();
+  void SetPlaybackRate(double aPlaybackRate);
+  void PreservesPitchChanged();
+
+  MediaQueue<MediaData>& AudioQueue() { return mAudioQueue; }
+  MediaQueue<MediaData>& VideoQueue() { return mVideoQueue; }
+
+  // True if our buffers of decoded audio are not full, and we should
+  // decode more.
+  bool NeedToDecodeAudio();
+
+  // True if our buffers of decoded video are not full, and we should
+  // decode more.
+  bool NeedToDecodeVideo();
+
+  // True if we are low in decoded audio/video data.
+  // May not be invoked when mReader->UseBufferingHeuristics() is false.
+  bool HasLowDecodedData();
+
+  bool HasLowDecodedAudio();
+
+  bool HasLowDecodedVideo();
+
+  bool OutOfDecodedAudio();
+
+  bool OutOfDecodedVideo()
+  {
+    MOZ_ASSERT(OnTaskQueue());
+    return IsVideoDecoding() && VideoQueue().GetSize() <= 1;
+  }
+
+
+  // Returns true if we're running low on buffered data.
+  bool HasLowBufferedData();
+
+  // Returns true if we have less than aUsecs of buffered data available.
+  bool HasLowBufferedData(int64_t aUsecs);
+
+  void UpdateNextFrameStatus(NextFrameStatus aStatus);
+
+  // Return the current time, either the audio clock if available (if the media
+  // has audio, and the playback is possible), or a clock for the video.
+  // Called on the state machine thread.
+  // If aTimeStamp is non-null, set *aTimeStamp to the TimeStamp corresponding
+  // to the returned stream time.
+  int64_t GetClock(TimeStamp* aTimeStamp = nullptr) const;
+
+  void SetStartTime(int64_t aStartTimeUsecs);
+
+  // Update only the state machine's current playback position (and duration,
+  // if unknown).  Does not update the playback position on the decoder or
+  // media element -- use UpdatePlaybackPosition for that.  Called on the state
+  // machine thread, caller must hold the decoder lock.
+  void UpdatePlaybackPositionInternal(int64_t aTime);
+
+  // Update playback position and trigger next update by default time period.
+  // Called on the state machine thread.
+  void UpdatePlaybackPositionPeriodically();
+
+  media::MediaSink* CreateAudioSink();
+
+  // Always create mediasink which contains an AudioSink or StreamSink inside.
+  already_AddRefed<media::MediaSink> CreateMediaSink(bool aAudioCaptured);
+
+  // Stops the media sink and shut it down.
+  // The decoder monitor must be held with exactly one lock count.
+  // Called on the state machine thread.
+  void StopMediaSink();
+
+  // Create and start the media sink.
+  // The decoder monitor must be held with exactly one lock count.
+  // Called on the state machine thread.
+  void StartMediaSink();
+
+  // Notification method invoked when mPlayState changes.
+  void PlayStateChanged();
+
+  // Notification method invoked when mIsVisible changes.
+  void VisibilityChanged();
+
+  // Sets internal state which causes playback of media to pause.
+  // The decoder monitor must be held.
+  void StopPlayback();
+
+  // If the conditions are right, sets internal state which causes playback
+  // of media to begin or resume.
+  // Must be called with the decode monitor held.
+  void MaybeStartPlayback();
+
+  // Moves the decoder into the shutdown state, and dispatches an error
+  // event to the media element. This begins shutting down the decoder.
+  // The decoder monitor must be held. This is only called on the
+  // decode thread.
+  void DecodeError(const MediaResult& aError);
+
+  // Dispatches a LoadedMetadataEvent.
+  // This is threadsafe and can be called on any thread.
+  // The decoder monitor must be held.
+  void EnqueueLoadedMetadataEvent();
+
+  void EnqueueFirstFrameLoadedEvent();
+
+  void DispatchAudioDecodeTaskIfNeeded();
+  void DispatchVideoDecodeTaskIfNeeded();
+
+  // Dispatch a task to decode audio if there is not.
+  void EnsureAudioDecodeTaskQueued();
+
+  // Dispatch a task to decode video if there is not.
+  void EnsureVideoDecodeTaskQueued();
+
+  // Start a task to decode audio.
+  // The decoder monitor must be held.
+  void RequestAudioData();
+
+  // Start a task to decode video.
+  // The decoder monitor must be held.
+  void RequestVideoData();
+
+  // Re-evaluates the state and determines whether we need to dispatch
+  // events to run the decode, or if not whether we should set the reader
+  // to idle mode. This is threadsafe, and can be called from any thread.
+  // The decoder monitor must be held.
+  void DispatchDecodeTasksIfNeeded();
+
+  // Returns the "media time". This is the absolute time which the media
+  // playback has reached. i.e. this returns values in the range
+  // [mStartTime, mEndTime], and mStartTime will not be 0 if the media does
+  // not start at 0. Note this is different than the "current playback position",
+  // which is in the range [0,duration].
+  int64_t GetMediaTime() const {
+    MOZ_ASSERT(OnTaskQueue());
+    return mCurrentPosition;
+  }
+
+  // Returns an upper bound on the number of microseconds of audio that is
+  // decoded and playable. This is the sum of the number of usecs of audio which
+  // is decoded and in the reader's audio queue, and the usecs of unplayed audio
+  // which has been pushed to the audio hardware for playback. Note that after
+  // calling this, the audio hardware may play some of the audio pushed to
+  // hardware, so this can only be used as a upper bound. The decoder monitor
+  // must be held when calling this. Called on the decode thread.
+  int64_t GetDecodedAudioDuration();
+
+  void FinishDecodeFirstFrame();
+
+  // Queries our state to see whether the decode has finished for all streams.
+  bool CheckIfDecodeComplete();
+
+  // Performs one "cycle" of the state machine.
+  void RunStateMachine();
+
+  bool IsStateMachineScheduled() const;
+
+  // These return true if the respective stream's decode has not yet reached
+  // the end of stream.
+  bool IsAudioDecoding();
+  bool IsVideoDecoding();
+
+private:
+  // Resolved by the MediaSink to signal that all audio/video outstanding
+  // work is complete and identify which part(a/v) of the sink is shutting down.
+  void OnMediaSinkAudioComplete();
+  void OnMediaSinkVideoComplete();
+
+  // Rejected by the MediaSink to signal errors for audio/video.
+  void OnMediaSinkAudioError(nsresult aResult);
+  void OnMediaSinkVideoError();
+
+  // Return true if the video decoder's decode speed can not catch up the
+  // play time.
+  bool NeedToSkipToNextKeyframe();
+
+  void* const mDecoderID;
+  const RefPtr<FrameStatistics> mFrameStats;
+  const RefPtr<VideoFrameContainer> mVideoFrameContainer;
+  const dom::AudioChannel mAudioChannel;
+
+  // Task queue for running the state machine.
+  RefPtr<TaskQueue> mTaskQueue;
+
+  // State-watching manager.
+  WatchManager<MediaDecoderStateMachine> mWatchManager;
+
+  // True if we've dispatched a task to run the state machine but the task has
+  // yet to run.
+  bool mDispatchedStateMachine;
+
+  // Used to dispatch another round schedule with specific target time.
+  DelayedScheduler mDelayedScheduler;
+
+  // Queue of audio frames. This queue is threadsafe, and is accessed from
+  // the audio, decoder, state machine, and main threads.
+  MediaQueue<MediaData> mAudioQueue;
+  // Queue of video frames. This queue is threadsafe, and is accessed from
+  // the decoder, state machine, and main threads.
+  MediaQueue<MediaData> mVideoQueue;
+
+  State mState = DECODER_STATE_DECODING_METADATA;
+
+  UniquePtr<StateObject> mStateObj;
+
+  media::TimeUnit Duration() const { MOZ_ASSERT(OnTaskQueue()); return mDuration.Ref().ref(); }
+
+  // Recomputes the canonical duration from various sources.
+  void RecomputeDuration();
+
+
+  // FrameID which increments every time a frame is pushed to our queue.
+  FrameID mCurrentFrameID;
+
+  // The highest timestamp that our position has reached. Monotonically
+  // increasing.
+  Watchable<media::TimeUnit> mObservedDuration;
+
+  // Returns true if we're logically playing, that is, if the Play() has
+  // been called and Pause() has not or we have not yet reached the end
+  // of media. This is irrespective of the seeking state; if the owner
+  // calls Play() and then Seek(), we still count as logically playing.
+  // The decoder monitor must be held.
+  bool IsLogicallyPlaying()
+  {
+    MOZ_ASSERT(OnTaskQueue());
+    return mPlayState == MediaDecoder::PLAY_STATE_PLAYING ||
+           mNextPlayState == MediaDecoder::PLAY_STATE_PLAYING;
+  }
+
+  // Media Fragment end time in microseconds. Access controlled by decoder monitor.
+  int64_t mFragmentEndTime;
+
+  // The media sink resource.  Used on the state machine thread.
+  RefPtr<media::MediaSink> mMediaSink;
+
+  const RefPtr<MediaDecoderReaderWrapper> mReader;
+
+  // The end time of the last audio frame that's been pushed onto the media sink
+  // in microseconds. This will approximately be the end time
+  // of the audio stream, unless another frame is pushed to the hardware.
+  int64_t AudioEndTime() const;
+
+  // The end time of the last rendered video frame that's been sent to
+  // compositor.
+  int64_t VideoEndTime() const;
+
+  // The end time of the last decoded audio frame. This signifies the end of
+  // decoded audio data. Used to check if we are low in decoded data.
+  int64_t mDecodedAudioEndTime;
+
+  // The end time of the last decoded video frame. Used to check if we are low
+  // on decoded video data.
+  int64_t mDecodedVideoEndTime;
+
+  // Playback rate. 1.0 : normal speed, 0.5 : two times slower.
+  double mPlaybackRate;
+
+  // If we've got more than this number of decoded video frames waiting in
+  // the video queue, we will not decode any more video frames until some have
+  // been consumed by the play state machine thread.
+  // Must hold monitor.
+  uint32_t GetAmpleVideoFrames() const;
+
+  // Low audio threshold. If we've decoded less than this much audio we
+  // consider our audio decode "behind", and we may skip video decoding
+  // in order to allow our audio decoding to catch up. We favour audio
+  // decoding over video. We increase this threshold if we're slow to
+  // decode video frames, in order to reduce the chance of audio underruns.
+  // Note that we don't ever reset this threshold, it only ever grows as
+  // we detect that the decode can't keep up with rendering.
+  int64_t mLowAudioThresholdUsecs;
+
+  // Our "ample" audio threshold. Once we've this much audio decoded, we
+  // pause decoding. If we increase mLowAudioThresholdUsecs, we'll also
+  // increase this too appropriately (we don't want mLowAudioThresholdUsecs
+  // to be greater than ampleAudioThreshold, else we'd stop decoding!).
+  // Note that we don't ever reset this threshold, it only ever grows as
+  // we detect that the decode can't keep up with rendering.
+  int64_t mAmpleAudioThresholdUsecs;
+
+  // At the start of decoding we want to "preroll" the decode until we've
+  // got a few frames decoded before we consider whether decode is falling
+  // behind. Otherwise our "we're falling behind" logic will trigger
+  // unnecessarily if we start playing as soon as the first sample is
+  // decoded. These two fields store how many video frames and audio
+  // samples we must consume before are considered to be finished prerolling.
+  uint32_t AudioPrerollUsecs() const
+  {
+    MOZ_ASSERT(OnTaskQueue());
+    return mAmpleAudioThresholdUsecs / 2;
+  }
+
+  uint32_t VideoPrerollFrames() const
+  {
+    MOZ_ASSERT(OnTaskQueue());
+    return GetAmpleVideoFrames() / 2;
+  }
+
+  // Only one of a given pair of ({Audio,Video}DataPromise, WaitForDataPromise)
+  // should exist at any given moment.
+
+  MediaEventListener mAudioCallback;
+  MediaEventListener mVideoCallback;
+  MediaEventListener mAudioWaitCallback;
+  MediaEventListener mVideoWaitCallback;
+
+  const char* AudioRequestStatus() const;
+  const char* VideoRequestStatus() const;
+
+  void OnSuspendTimerResolved();
+  void OnSuspendTimerRejected();
+
+  // True if we shouldn't play our audio (but still write it to any capturing
+  // streams). When this is true, the audio thread will never start again after
+  // it has stopped.
+  bool mAudioCaptured;
+
+  // True if all audio frames are already rendered.
+  bool mAudioCompleted = false;
+
+  // True if all video frames are already rendered.
+  bool mVideoCompleted = false;
+
+  // Flag whether we notify metadata before decoding the first frame or after.
+  //
+  // Note that the odd semantics here are designed to replicate the current
+  // behavior where we notify the decoder each time we come out of dormant, but
+  // send suppressed event visibility for those cases. This code can probably be
+  // simplified.
+  bool mNotifyMetadataBeforeFirstFrame;
+
+  // True if we should not decode/preroll unnecessary samples, unless we're
+  // played. "Prerolling" in this context refers to when we decode and
+  // buffer decoded samples in advance of when they're needed for playback.
+  // This flag is set for preload=metadata media, and means we won't
+  // decode more than the first video frame and first block of audio samples
+  // for that media when we startup, or after a seek. When Play() is called,
+  // we reset this flag, as we assume the user is playing the media, so
+  // prerolling is appropriate then. This flag is used to reduce the overhead
+  // of prerolling samples for media elements that may not play, both
+  // memory and CPU overhead.
+  bool mMinimizePreroll;
+
+  // Stores presentation info required for playback.
+  Maybe<MediaInfo> mInfo;
+
+  nsAutoPtr<MetadataTags> mMetadataTags;
+
+  mozilla::MediaMetadataManager mMetadataManager;
+
+  // Track our request to update the buffered ranges
+  MozPromiseRequestHolder<MediaDecoderReader::BufferedUpdatePromise> mBufferedUpdateRequest;
+
+  // True if we are back from DECODER_STATE_DORMANT state and
+  // LoadedMetadataEvent was already sent.
+  bool mSentLoadedMetadataEvent;
+
+  // True if we've decoded first frames (thus having the start time) and
+  // notified the FirstFrameLoaded event. Note we can't initiate seek until the
+  // start time is known which happens when the first frames are decoded or we
+  // are playing an MSE stream (the start time is always assumed 0).
+  bool mSentFirstFrameLoadedEvent;
+
+  // True if video decoding is suspended.
+  bool mVideoDecodeSuspended;
+
+  // True if the media is seekable (i.e. supports random access).
+  bool mMediaSeekable = true;
+
+  // True if the media is seekable only in buffered ranges.
+  bool mMediaSeekableOnlyInBufferedRanges = false;
+
+  // Track enabling video decode suspension via timer
+  DelayedScheduler mVideoDecodeSuspendTimer;
+
+  // Data about MediaStreams that are being fed by the decoder.
+  const RefPtr<OutputStreamManager> mOutputStreamManager;
+
+  // Media data resource from the decoder.
+  RefPtr<MediaResource> mResource;
+
+  // Track the complete & error for audio/video separately
+  MozPromiseRequestHolder<GenericPromise> mMediaSinkAudioPromise;
+  MozPromiseRequestHolder<GenericPromise> mMediaSinkVideoPromise;
+
+  MediaEventListener mAudioQueueListener;
+  MediaEventListener mVideoQueueListener;
+  MediaEventListener mAudibleListener;
+  MediaEventListener mOnMediaNotSeekable;
+
+  MediaEventProducerExc<nsAutoPtr<MediaInfo>,
+                        nsAutoPtr<MetadataTags>,
+                        MediaDecoderEventVisibility> mMetadataLoadedEvent;
+  MediaEventProducerExc<nsAutoPtr<MediaInfo>,
+                        MediaDecoderEventVisibility> mFirstFrameLoadedEvent;
+
+  MediaEventProducer<MediaEventType> mOnPlaybackEvent;
+  MediaEventProducer<MediaResult> mOnPlaybackErrorEvent;
+
+  MediaEventProducer<DecoderDoctorEvent> mOnDecoderDoctorEvent;
+
+  // True if audio is offloading.
+  // Playback will not start when audio is offloading.
+  bool mAudioOffloading;
+
+  void OnCDMProxyReady(RefPtr<CDMProxy> aProxy);
+  void OnCDMProxyNotReady();
+  RefPtr<CDMProxy> mCDMProxy;
+  MozPromiseRequestHolder<MediaDecoder::CDMProxyPromise> mCDMProxyPromise;
+
+private:
+  // The buffered range. Mirrored from the decoder thread.
+  Mirror<media::TimeIntervals> mBuffered;
+
+  // The duration according to the demuxer's current estimate, mirrored from the main thread.
+  Mirror<media::NullableTimeUnit> mEstimatedDuration;
+
+  // The duration explicitly set by JS, mirrored from the main thread.
+  Mirror<Maybe<double>> mExplicitDuration;
+
+  // The current play state and next play state, mirrored from the main thread.
+  Mirror<MediaDecoder::PlayState> mPlayState;
+  Mirror<MediaDecoder::PlayState> mNextPlayState;
+
+  // Volume of playback. 0.0 = muted. 1.0 = full volume.
+  Mirror<double> mVolume;
+
+  // Pitch preservation for the playback rate.
+  Mirror<bool> mPreservesPitch;
+
+  // True if the media is same-origin with the element. Data can only be
+  // passed to MediaStreams when this is true.
+  Mirror<bool> mSameOriginMedia;
+
+  // An identifier for the principal of the media. Used to track when
+  // main-thread induced principal changes get reflected on MSG thread.
+  Mirror<PrincipalHandle> mMediaPrincipalHandle;
+
+  // Estimate of the current playback rate (bytes/second).
+  Mirror<double> mPlaybackBytesPerSecond;
+
+  // True if mPlaybackBytesPerSecond is a reliable estimate.
+  Mirror<bool> mPlaybackRateReliable;
+
+  // Current decoding position in the stream.
+  Mirror<int64_t> mDecoderPosition;
+
+  // IsVisible, mirrored from the media decoder.
+  Mirror<bool> mIsVisible;
+
+  // Duration of the media. This is guaranteed to be non-null after we finish
+  // decoding the first frame.
+  Canonical<media::NullableTimeUnit> mDuration;
+
+  // Whether we're currently in or transitioning to shutdown state.
+  Canonical<bool> mIsShutdown;
+
+  // The status of our next frame. Mirrored on the main thread and used to
+  // compute ready state.
+  Canonical<NextFrameStatus> mNextFrameStatus;
+
+  // The time of the current frame in microseconds, corresponding to the "current
+  // playback position" in HTML5. This is referenced from 0, which is the initial
+  // playback position.
+  Canonical<int64_t> mCurrentPosition;
+
+  // Current playback position in the stream in bytes.
+  Canonical<int64_t> mPlaybackOffset;
+
+  // Used to distinguish whether the audio is producing sound.
+  Canonical<bool> mIsAudioDataAudible;
+
+public:
+  AbstractCanonical<media::TimeIntervals>* CanonicalBuffered() const;
+
+  AbstractCanonical<media::NullableTimeUnit>* CanonicalDuration() {
+    return &mDuration;
+  }
+  AbstractCanonical<bool>* CanonicalIsShutdown() {
+    return &mIsShutdown;
+  }
+  AbstractCanonical<NextFrameStatus>* CanonicalNextFrameStatus() {
+    return &mNextFrameStatus;
+  }
+  AbstractCanonical<int64_t>* CanonicalCurrentPosition() {
+    return &mCurrentPosition;
+  }
+  AbstractCanonical<int64_t>* CanonicalPlaybackOffset() {
+    return &mPlaybackOffset;
+  }
+  AbstractCanonical<bool>* CanonicalIsAudioDataAudible() {
+    return &mIsAudioDataAudible;
+  }
+};
+
+} // namespace mozilla
+
+#endif