summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorHeinz Wiesinger <pprkut@slackbuilds.org>2010-05-13 00:08:37 +0200
committerHeinz Wiesinger <pprkut@slackbuilds.org>2010-05-13 00:08:37 +0200
commitbee94398ad86544df421952951167b4f5ef299fb (patch)
treeb2dc298f54bc3b03dd1d3333a8253826846e03bb
parent88c212d1d4cf1662d5f1053fefcd9c52dae6c48c (diff)
downloadslackbuilds-bee94398ad86544df421952951167b4f5ef299fb.tar.gz
network/exim: Removed from 13.0 repository
-rw-r--r--network/exim/README28
-rw-r--r--network/exim/doinst.sh21
-rw-r--r--network/exim/exim.Makefile1137
-rw-r--r--network/exim/exim.SlackBuild123
-rw-r--r--network/exim/exim.info8
-rw-r--r--network/exim/exim.logrotate7
-rw-r--r--network/exim/eximon.Makefile182
-rw-r--r--network/exim/rc.exim.new61
-rw-r--r--network/exim/slack-desc19
9 files changed, 0 insertions, 1586 deletions
diff --git a/network/exim/README b/network/exim/README
deleted file mode 100644
index 70321898b0..0000000000
--- a/network/exim/README
+++ /dev/null
@@ -1,28 +0,0 @@
-Exim is a mail transfer agent (MTA) used on Unix-like operating systems.
-It is freely available under the GNU GPL and it aims to be a general
-and flexible mailer with extensive facilities for checking incoming e-mail.
-
-Exim was orginally written by Philip Hazel for use in the University
-of Cambridge Computing Services e-mail systems.
-
-Exim has no configure but requires the exim.Makefile. This file is included
-with the makefile. The exim.Makefile has some of the more important attributes
-enabled such as Content scanning, Database integration ((only Mysql), extra
-security facilities (such as TCPWRAPPERS) and more.
-
-Also "eximon" (the configuration for this is eximon.Makefile) and has been
-included which a nice and simple monitoring tool for X and hence can be used
-from any console to monitor your MTA. Please read through both files
-and mofidy them as you see fit.
-
-All documentation for exim is included in /usr/doc/exim-*. Another good
-source for documentation can be found at http://www.exim-new-users.co.uk/.
-
-To fully integrate Exim with the rest of your system you would have to create
-symlinks for sendmail to point to the exim binary. Please *NOTE* that this
-might break sendmail from working. If you ever remove exim, you might need to
-reinstall Sendmail.
-
-Finally Exim can be integrated with other email tools such as Clamav,
-Spamassassin, Bogofilter and others, which are available at Slackbuilds.org.
-
diff --git a/network/exim/doinst.sh b/network/exim/doinst.sh
deleted file mode 100644
index 5e76fa1af3..0000000000
--- a/network/exim/doinst.sh
+++ /dev/null
@@ -1,21 +0,0 @@
-config() {
- NEW="$1"
- OLD="$(dirname $NEW)/$(basename $NEW .new)"
- # If there's no config file by that name, mv it over:
- if [ ! -r $OLD ]; then
- mv $NEW $OLD
- elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy
- rm $NEW
- fi
- # Otherwise, we leave the .new copy for the admin to consider...
-}
-
-# Keep same perms on rc.exim.new:
-if [ -e etc/rc.d/rc.exim ]; then
- cp -a etc/rc.d/rc.exim etc/rc.d/rc.exim.new.incoming
- cat etc/rc.d/rc.exim.new > etc/rc.d/rc.exim.new.incoming
- mv etc/rc.d/rc.exim.new.incoming etc/rc.d/rc.exim.new
-fi
-
-config etc/rc.d/rc.exim.new
-config etc/exim/exim.conf.new
diff --git a/network/exim/exim.Makefile b/network/exim/exim.Makefile
deleted file mode 100644
index 0da094c859..0000000000
--- a/network/exim/exim.Makefile
+++ /dev/null
@@ -1,1137 +0,0 @@
-# $Cambridge: exim/exim-src/src/EDITME,v 1.20 2007/01/22 16:29:54 ph10 Exp $
-
-##################################################
-# The Exim mail transport agent #
-##################################################
-
-# This is the template for Exim's main build-time configuration file. It
-# contains settings that are independent of any operating system. These are
-# things that are mostly sysadmin choices. The items below are divided into
-# those you must specify, those you probably want to specify, those you might
-# often want to specify, and those that you almost never need to mention.
-
-# Edit this file and save the result to a file called Local/Makefile within the
-# Exim distribution directory before running the "make" command.
-
-# Things that depend on the operating system have default settings in
-# OS/Makefile-Default, but these are overridden for some OS by files called
-# called OS/Makefile-<osname>. You can further override these by creating files
-# called Local/Makefile-<osname>, where "<osname>" stands for the name of your
-# operating system - look at the names in the OS directory to see which names
-# are recognized.
-
-# However, if you are building Exim for a single OS only, you don't need to
-# worry about setting up Local/Makefile-<osname>. Any build-time configuration
-# settings you require can in fact be placed in the one file called
-# Local/Makefile. It is only if you are building for several OS from the same
-# source files that you need to worry about splitting off your own OS-dependent
-# settings into separate files. (There's more explanation about how this all
-# works in the toplevel README file, under "Modifying the building process", as
-# well as in the Exim specification.)
-
-# One OS-specific thing that may need to be changed is the command for running
-# the C compiler; the overall default is gcc, but some OS Makefiles specify cc.
-# You can override anything that is set by putting CC=whatever in your
-# Local/Makefile.
-
-# NOTE: You should never need to edit any of the distributed Makefiles; all
-# overriding can be done in your Local/Makefile(s). This will make it easier
-# for you when the next release comes along.
-
-# The location of the X11 libraries is something else that is quite variable
-# even between different versions of the same operating system (and indeed
-# there are different versions of X11 as well, of course). The four settings
-# concerned here are X11, XINCLUDE, XLFLAGS (linking flags) and X11_LD_LIB
-# (dynamic run-time library). You need not worry about X11 unless you want to
-# compile the Exim monitor utility. Exim itself does not use X11.
-
-# Another area of variability between systems is the type and location of the
-# DBM library package. Exim has support for ndbm, gdbm, tdb, and Berkeley DB.
-# By default the code assumes ndbm; this often works with gdbm or DB, provided
-# they are correctly installed, via their compatibility interfaces. However,
-# Exim can also be configured to use the native calls for Berkeley DB (obsolete
-# versions 1.85, 2.x, 3.x, or the current 4.x version) and also for gdbm.
-
-# For some operating systems, a default DBM library (other than ndbm) is
-# selected by a setting in the OS-specific Makefile. Most modern OS now have
-# a DBM library installed as standard, and in many cases this will be selected
-# for you by the OS-specific configuration. If Exim compiles without any
-# problems, you probably do not have to worry about the DBM library. If you
-# do want or need to change it, you should first read the discussion in the
-# file doc/dbm.discuss.txt, which also contains instructions for testing Exim's
-# interface to the DBM library.
-
-# In Local/Makefiles blank lines and lines starting with # are ignored. It is
-# also permitted to use the # character to add a comment to a setting, for
-# example
-#
-# EXIM_GID=42 # the "mail" group
-#
-# However, with some versions of "make" this works only if there is no white
-# space between the end of the setting and the #, so perhaps it is best
-# avoided. A consequence of this facility is that it is not possible to have
-# the # character present in any setting, but I can't think of any cases where
-# this would be wanted.
-###############################################################################
-
-CFLAGS="#SLKCFLAGS#"
-
-###############################################################################
-# THESE ARE THINGS YOU MUST SPECIFY #
-###############################################################################
-
-# Exim will not build unless you specify BIN_DIRECTORY, CONFIGURE_FILE, and
-# EXIM_USER. You also need EXIM_GROUP if EXIM_USER specifies a uid by number.
-
-# If you don't specify SPOOL_DIRECTORY, Exim won't fail to build. However, it
-# really is a very good idea to specify it here rather than at run time. This
-# is particularly true if you let the logs go to their default location in the
-# spool directory, because it means that the location of the logs is known
-# before Exim has read the run time configuration file.
-
-#------------------------------------------------------------------------------
-# BIN_DIRECTORY defines where the exim binary will be installed by "make
-# install". The path is also used internally by Exim when it needs to re-invoke
-# itself, either to send an error message, or to recover root privilege. Exim's
-# utility binaries and scripts are also installed in this directory. There is
-# no "standard" place for the binary directory. Some people like to keep all
-# the Exim files under one directory such as /usr/exim; others just let the
-# Exim binaries go into an existing directory such as /usr/sbin or
-# /usr/local/sbin. The installation script will try to create this directory,
-# and any superior directories, if they do not exist.
-
-BIN_DIRECTORY=/usr/sbin
-
-
-#------------------------------------------------------------------------------
-# CONFIGURE_FILE defines where Exim's run time configuration file is to be
-# found. It is the complete pathname for the file, not just a directory. The
-# location of all other run time files and directories can be changed in the
-# run time configuration file. There is a lot of variety in the choice of
-# location in different OS, and in the preferences of different sysadmins. Some
-# common locations are in /etc or /etc/mail or /usr/local/etc or
-# /usr/local/etc/mail. Another possibility is to keep all the Exim files under
-# a single directory such as /usr/exim. Whatever you choose, the installation
-# script will try to make the directory and any superior directories if they
-# don't exist. It will also install a default runtime configuration if this
-# file does not exist.
-
-CONFIGURE_FILE=/etc/exim/exim.conf
-
-# It is possible to specify a colon-separated list of files for CONFIGURE_FILE.
-# In this case, Exim will use the first of them that exists when it is run.
-# However, if a list is specified, the installation script no longer tries to
-# make superior directories or to install a default runtime configuration.
-
-
-#------------------------------------------------------------------------------
-# The Exim binary must normally be setuid root, so that it starts executing as
-# root, but (depending on the options with which it is called) it does not
-# always need to retain the root privilege. These settings define the user and
-# group that is used for Exim processes when they no longer need to be root. In
-# particular, this applies when receiving messages and when doing remote
-# deliveries. (Local deliveries run as various non-root users, typically as the
-# owner of a local mailbox.) Specifying these values as root is very strongly
-# discouraged.
-
-#EXIM_USER=
-
-# If you specify EXIM_USER as a name, this is looked up at build time, and the
-# uid number is built into the binary. However, you can specify that this
-# lookup is deferred until runtime. In this case, it is the name that is built
-# into the binary. You can do this by a setting of the form:
-
-EXIM_USER=ref:exim
-
-# In other words, put "ref:" in front of the user name. If you set EXIM_USER
-# like this, any value specified for EXIM_GROUP is also passed "by reference".
-# Although this costs a bit of resource at runtime, it is convenient to use
-# this feature when building binaries that are to be run on multiple systems
-# where the name may refer to different uids. It also allows you to build Exim
-# on a system where there is no Exim user defined.
-
-# If the setting of EXIM_USER is numeric (e.g. EXIM_USER=42), there must
-# also be a setting of EXIM_GROUP. If, on the other hand, you use a name
-# for EXIM_USER (e.g. EXIM_USER=exim), you don't need to set EXIM_GROUP unless
-# you want to use a group other than the default group for the given user.
-
-EXIM_GROUP=exim
-
-# Many sites define a user called "exim", with an appropriate default group,
-# and use
-#
-# EXIM_USER=exim
-#
-# while leaving EXIM_GROUP unspecified (commented out).
-
-
-#------------------------------------------------------------------------------
-# SPOOL_DIRECTORY defines the directory where all the data for messages in
-# transit is kept. It is strongly recommended that you define it here, though
-# it is possible to leave this till the run time configuration.
-
-# Exim creates the spool directory if it does not exist. The owner and group
-# will be those defined by EXIM_USER and EXIM_GROUP, and this also applies to
-# all the files and directories that are created in the spool directory.
-
-# Almost all installations choose this:
-
-SPOOL_DIRECTORY=/var/spool/exim
-
-
-
-###############################################################################
-# THESE ARE THINGS YOU PROBABLY WANT TO SPECIFY #
-###############################################################################
-
-# If you need extra header file search paths on all compiles, put the -I
-# options in INCLUDE. If you want the extra searches only for certain
-# parts of the build, see more specific xxx_INCLUDE variables below.
-
-# INCLUDE=-I/example/include
-
-# You need to specify some routers and transports if you want the Exim that you
-# are building to be capable of delivering mail. You almost certainly need at
-# least one type of lookup. You should consider whether you want to build
-# the Exim monitor or not.
-
-
-#------------------------------------------------------------------------------
-# These settings determine which individual router drivers are included in the
-# Exim binary. There are no defaults in the code; those routers that are wanted
-# must be defined here by setting the appropriate variables to the value "yes".
-# Including a router in the binary does not cause it to be used automatically.
-# It has also to be configured in the run time configuration file. By
-# commenting out those you know you don't want to use, you can make the binary
-# a bit smaller. If you are unsure, leave all of these included for now.
-
-ROUTER_ACCEPT=yes
-ROUTER_DNSLOOKUP=yes
-ROUTER_IPLITERAL=yes
-ROUTER_MANUALROUTE=yes
-ROUTER_QUERYPROGRAM=yes
-ROUTER_REDIRECT=yes
-
-# This one is very special-purpose, so is not included by default.
-
-# ROUTER_IPLOOKUP=yes
-
-
-#------------------------------------------------------------------------------
-# These settings determine which individual transport drivers are included in
-# the Exim binary. There are no defaults; those transports that are wanted must
-# be defined here by setting the appropriate variables to the value "yes".
-# Including a transport in the binary does not cause it to be used
-# automatically. It has also to be configured in the run time configuration
-# file. By commenting out those you know you don't want to use, you can make
-# the binary a bit smaller. If you are unsure, leave all of these included for
-# now.
-
-TRANSPORT_APPENDFILE=yes
-TRANSPORT_AUTOREPLY=yes
-TRANSPORT_PIPE=yes
-TRANSPORT_SMTP=yes
-
-# This one is special-purpose, and commonly not required, so it is not
-# included by default.
-
-# TRANSPORT_LMTP=yes
-
-
-#------------------------------------------------------------------------------
-# The appendfile transport can write messages to local mailboxes in a number
-# of formats. The code for three specialist formats, maildir, mailstore, and
-# MBX, is included only when requested. If you do not know what this is about,
-# leave these settings commented out.
-
- SUPPORT_MAILDIR=yes
- SUPPORT_MAILSTORE=yes
- SUPPORT_MBX=yes
-
-
-#------------------------------------------------------------------------------
-# These settings determine which file and database lookup methods are included
-# in the binary. See the manual chapter entitled "File and database lookups"
-# for discussion. DBM and lsearch (linear search) are included by default. If
-# you are unsure about the others, leave them commented out for now.
-# LOOKUP_DNSDB does *not* refer to general mail routing using the DNS. It is
-# for the specialist case of using the DNS as a general database facility (not
-# common).
-
-LOOKUP_DBM=yes
-LOOKUP_LSEARCH=yes
-
-# LOOKUP_CDB=yes
-# LOOKUP_DNSDB=yes
-LOOKUP_DSEARCH=yes
-# LOOKUP_IBASE=yes
-# LOOKUP_LDAP=yes
-LOOKUP_MYSQL=yes
-# LOOKUP_NIS=yes
-# LOOKUP_NISPLUS=yes
-# LOOKUP_ORACLE=yes
-LOOKUP_PASSWD=yes
-# LOOKUP_PGSQL=yes
-# LOOKUP_SQLITE=yes
-# LOOKUP_WHOSON=yes
-
-# These two settings are obsolete; all three lookups are compiled when
-# LOOKUP_LSEARCH is enabled. However, we retain these for backward
-# compatibility. Setting one forces LOOKUP_LSEARCH if it is not set.
-
-# LOOKUP_WILDLSEARCH=yes
-# LOOKUP_NWILDLSEARCH=yes
-
-
-#------------------------------------------------------------------------------
-# If you have set LOOKUP_LDAP=yes, you should set LDAP_LIB_TYPE to indicate
-# which LDAP library you have. Unfortunately, though most of their functions
-# are the same, there are minor differences. Currently Exim knows about four
-# LDAP libraries: the one from the University of Michigan (also known as
-# OpenLDAP 1), OpenLDAP 2, the Netscape SDK library, and the library that comes
-# with Solaris 7 onwards. Uncomment whichever of these you are using.
-
-# LDAP_LIB_TYPE=OPENLDAP1
-# LDAP_LIB_TYPE=OPENLDAP2
-# LDAP_LIB_TYPE=NETSCAPE
-# LDAP_LIB_TYPE=SOLARIS
-
-# If you don't set any of these, Exim assumes the original University of
-# Michigan (OpenLDAP 1) library.
-
-
-#------------------------------------------------------------------------------
-# Additional libraries and include directories may be required for some
-# lookup styles (e.g. LDAP, MYSQL or PGSQL). LOOKUP_LIBS is included only on
-# the command for linking Exim itself, not on any auxiliary programs. You
-# don't need to set LOOKUP_INCLUDE if the relevant directories are already
-# specified in INCLUDE. The settings below are just examples; -lpq is for
-# PostgreSQL, -lgds is for Interbase, -lsqlite3 is for SQLite.
-
-LOOKUP_INCLUDE=-I /usr/include/mysql
-LOOKUP_LIBS=-L/usr/lib/mysql -lmysqlclient
-
-#------------------------------------------------------------------------------
-# Compiling the Exim monitor: If you want to compile the Exim monitor, a
-# program that requires an X11 display, then EXIM_MONITOR should be set to the
-# value "eximon.bin". Comment out this setting to disable compilation of the
-# monitor. The locations of various X11 directories for libraries and include
-# files are defaulted in the OS/Makefile-Default file, but can be overridden in
-# local OS-specific make files.
-
-EXIM_MONITOR=eximon.bin
-
-
-#------------------------------------------------------------------------------
-# Compiling Exim with content scanning support: If you want to compile Exim
-# with support for message body content scanning, set WITH_CONTENT_SCAN to
-# the value "yes". This will give you malware and spam scanning in the DATA ACL,
-# and the MIME ACL. Please read the documentation to learn more about these
-# features.
-
-WITH_CONTENT_SCAN=yes
-
-# If you want to use the deprecated "demime" condition in the DATA ACL,
-# uncomment the line below. Doing so will also explicitly turn on the
-# WITH_CONTENT_SCAN option. If possible, use the MIME ACL instead of
-# the "demime" condition.
-
-WITH_OLD_DEMIME=yes
-
-#------------------------------------------------------------------------------
-# Compiling Exim with experimental features. These are documented in
-# experimental-spec.txt. "Experimental" means that the way these features are
-# implemented may still change. Backward compatibility is not guaranteed.
-
-# Uncomment the following lines to add SPF support. You need to have libspf2
-# installed on your system (www.libspf2.org). Depending on where it is installed
-# you may have to edit the CFLAGS and LDFLAGS lines.
-
-# EXPERIMENTAL_SPF=yes
-# CFLAGS += -I/usr/local/include
-# LDFLAGS += -lspf2
-
-# Uncomment the following lines to add SRS (Sender rewriting scheme) support.
-# You need to have libsrs_alt installed on your system (srs.mirtol.com).
-# Depending on where it is installed you may have to edit the CFLAGS and
-# LDFLAGS lines.
-
-# EXPERIMENTAL_SRS=yes
-# CFLAGS += -I/usr/local/include
-# LDFLAGS += -lsrs_alt
-
-# Uncomment the following lines to add Brightmail AntiSpam support. You need
-# to have the Brightmail client SDK installed. Please check the experimental
-# documentation for implementation details. You need to edit the CFLAGS and
-# LDFLAGS lines.
-
-# EXPERIMENTAL_BRIGHTMAIL=yes
-# CFLAGS += -I/opt/brightmail/bsdk-6.0/include
-# LDFLAGS += -lxml2_single -lbmiclient_single -L/opt/brightmail/bsdk-6.0/lib
-
-
-
-###############################################################################
-# THESE ARE THINGS YOU MIGHT WANT TO SPECIFY #
-###############################################################################
-
-# The items in this section are those that are commonly changed according to
-# the sysadmin's preferences, but whose defaults are often acceptable. The
-# first five are concerned with security issues, where differing levels of
-# paranoia are appropriate in different environments. Sysadmins also vary in
-# their views on appropriate levels of defence in these areas. If you do not
-# understand these issues, go with the defaults, which are used by many sites.
-
-
-#------------------------------------------------------------------------------
-# Although Exim is normally a setuid program, owned by root, it refuses to run
-# local deliveries as root by default. There is a runtime option called
-# "never_users" which lists the users that must never be used for local
-# deliveries. There is also the setting below, which provides a list that
-# cannot be overridden at runtime. This guards against problems caused by
-# unauthorized changes to the runtime configuration. You are advised not to
-# remove "root" from this option, but you can add other users if you want. The
-# list is colon-separated. It must NOT contain any spaces.
-
-# FIXED_NEVER_USERS=root:bin:daemon
-FIXED_NEVER_USERS=root
-
-
-#------------------------------------------------------------------------------
-# By default, Exim insists that its configuration file be owned either by root
-# or by the Exim user. You can specify one additional permitted owner here.
-
-# CONFIGURE_OWNER=
-
-# If the configuration file is group-writeable, Exim insists by default that it
-# is owned by root or the Exim user. You can specify one additional permitted
-# group owner here.
-
-# CONFIGURE_GROUP=
-
-# If you specify CONFIGURE_OWNER or CONFIGURE_GROUP as a name, this is looked
-# up at build time, and the uid or gid number is built into the binary.
-# However, you can specify that the lookup is deferred until runtime. In this
-# case, it is the name that is built into the binary. You can do this by a
-# setting of the form:
-
-# CONFIGURE_OWNER=ref:mail
-# CONFIGURE_GROUP=ref:sysadmin
-
-# In other words, put "ref:" in front of the user or group name. Although this
-# costs a bit of resource at runtime, it is convenient to use this feature when
-# building binaries that are to be run on multiple systems where the names may
-# refer to different uids or gids. It also allows you to build Exim on a system
-# where the relevant user or group is not defined.
-
-
-#------------------------------------------------------------------------------
-# The -C option allows Exim to be run with an alternate runtime configuration
-# file. When this is used by root or the Exim user, root privilege is retained
-# by the binary (for any other caller, it is dropped). You can restrict the
-# location of alternate configurations by defining a prefix below. Any file
-# used with -C must then start with this prefix (except that /dev/null is also
-# permitted if the caller is root, because that is used in the install script).
-# If the prefix specifies a directory that is owned by root, a compromise of
-# the Exim account does not permit arbitrary alternate configurations to be
-# used. The prefix can be more restrictive than just a directory (the second
-# example).
-
-# ALT_CONFIG_PREFIX=/some/directory/
-# ALT_CONFIG_PREFIX=/some/directory/exim.conf-
-
-
-#------------------------------------------------------------------------------
-# If you uncomment the following line, only root may use the -C or -D options
-# without losing root privilege. The -C option specifies an alternate runtime
-# configuration file, and the -D option changes macro values in the runtime
-# configuration. Uncommenting this line restricts what can be done with these
-# options. A call to receive a message (either one-off or via a daemon) cannot
-# successfully continue to deliver it, because the re-exec of Exim to regain
-# root privilege will fail, owing to the use of -C or -D by the Exim user.
-# However, you can still use -C for testing (as root) if you do separate Exim
-# calls for receiving a message and subsequently delivering it.
-
-# ALT_CONFIG_ROOT_ONLY=yes
-
-
-#------------------------------------------------------------------------------
-# Uncommenting this option disables the use of the -D command line option,
-# which changes the values of macros in the runtime configuration file.
-# This is another protection against somebody breaking into the Exim account.
-
-# DISABLE_D_OPTION=yes
-
-
-#------------------------------------------------------------------------------
-# Exim has support for the AUTH (authentication) extension of the SMTP
-# protocol, as defined by RFC 2554. If you don't know what SMTP authentication
-# is, you probably won't want to include this code, so you should leave these
-# settings commented out. If you do want to make use of SMTP authentication,
-# you must uncomment at least one of the following, so that appropriate code is
-# included in the Exim binary. You will then need to set up the run time
-# configuration to make use of the mechanism(s) selected.
-
-AUTH_CRAM_MD5=yes
-AUTH_CYRUS_SASL=yes
-AUTH_DOVECOT=yes
-AUTH_PLAINTEXT=yes
-# AUTH_SPA=yes
-
-
-#------------------------------------------------------------------------------
-# If you specified AUTH_CYRUS_SASL above, you should ensure that you have the
-# Cyrus SASL library installed before trying to build Exim, and you probably
-# want to uncomment the following line:
-
-AUTH_LIBS=-lsasl2
-
-
-#------------------------------------------------------------------------------
-# When Exim is decoding MIME "words" in header lines, most commonly for use
-# in the $header_xxx expansion, it converts any foreign character sets to the
-# one that is set in the headers_charset option. The default setting is
-# defined by this setting:
-
-HEADERS_CHARSET="ISO-8859-1"
-
-# If you are going to make use of $header_xxx expansions in your configuration
-# file, or if your users are going to use them in filter files, and the normal
-# character set on your host is something other than ISO-8859-1, you might
-# like to specify a different default here. This value can be overridden in
-# the runtime configuration, and it can also be overridden in individual filter
-# files.
-#
-# IMPORTANT NOTE: The iconv() function is needed for character code
-# conversions. Please see the next item...
-
-
-#------------------------------------------------------------------------------
-# Character code conversions are possible only if the iconv() function is
-# installed on your operating system. There are two places in Exim where this
-# is relevant: (a) The $header_xxx expansion (see the previous item), and (b)
-# the Sieve filter support. For those OS where iconv() is known to be installed
-# as standard, the file in OS/Makefile-xxxx contains
-#
-# HAVE_ICONV=yes
-#
-# If you are not using one of those systems, but have installed iconv(), you
-# need to uncomment that line above. In some cases, you may find that iconv()
-# and its header file are not in the default places. You might need to use
-# something like this:
-#
-# HAVE_ICONV=yes
-# CFLAGS=-O -I/usr/local/include
-# EXTRALIBS_EXIM=-L/usr/local/lib -liconv
-#
-# but of course there may need to be other things in CFLAGS and EXTRALIBS_EXIM
-# as well.
-
-
-#------------------------------------------------------------------------------
-# The passwords for user accounts are normally encrypted with the crypt()
-# function. Comparisons with encrypted passwords can be done using Exim's
-# "crypteq" expansion operator. (This is commonly used as part of the
-# configuration of an authenticator for use with SMTP AUTH.) At least one
-# operating system has an extended function called crypt16(), which uses up to
-# 16 characters of a password (the normal crypt() uses only the first 8). Exim
-# supports the use of crypt16() as well as crypt() but note the warning below.
-
-# You can always indicate a crypt16-encrypted password by preceding it with
-# "{crypt16}". If you want the default handling (without any preceding
-# indicator) to use crypt16(), uncomment the following line:
-
-# DEFAULT_CRYPT=crypt16
-
-# If you do that, you can still access the basic crypt() function by preceding
-# an encrypted password with "{crypt}". For more details, see the description
-# of the "crypteq" condition in the manual chapter on string expansions.
-
-# Some operating systems do not include a crypt16() function, so Exim has one
-# of its own, which it uses unless HAVE_CRYPT16 is defined. Normally, that will
-# be set in an OS-specific Makefile for the OS that have such a function, so
-# you should not need to bother with it.
-
-# *** WARNING *** WARNING *** WARNING *** WARNING *** WARNING ***
-# It turns out that the above is not entirely accurate. As well as crypt16()
-# there is a function called bigcrypt() that some operating systems have. This
-# may or may not use the same algorithm, and both of them may be different to
-# Exim's built-in crypt16() that is used unless HAVE_CRYPT16 is defined.
-#
-# However, since there is now a move away from the traditional crypt()
-# functions towards using SHA1 and other algorithms, tidying up this area of
-# Exim is seen as very low priority. In practice, if you need to, you can
-# define DEFAULT_CRYPT to the name of any function that has the same interface
-# as the traditional crypt() function.
-# *** WARNING *** WARNING *** WARNING *** WARNING *** WARNING ***
-
-
-#------------------------------------------------------------------------------
-# Exim can be built to support the SMTP STARTTLS command, which implements
-# Transport Layer Security using SSL (Secure Sockets Layer). To do this, you
-# must install the OpenSSL library package or the GnuTLS library. Exim contains
-# no cryptographic code of its own. Uncomment the following lines if you want
-# to build Exim with TLS support. If you don't know what this is all about,
-# leave these settings commented out.
-
-# This setting is required for any TLS support (either OpenSSL or GnuTLS)
-#SUPPORT_TLS=yes
-
-# Uncomment this setting if you are using OpenSSL
-#TLS_LIBS=-lssl -lcrypto
-
-# Test 1 Thales To see if it will work as Slack 12.1 comes with GNUTls
-
-# Uncomment these settings if you are using GnuTLS
-USE_GNUTLS=yes
-TLS_LIBS=-lgnutls -lgcrypt
-
-# If you are running Exim as a server, note that just building it with TLS
-# support is not all you need to do. You also need to set up a suitable
-# certificate, and tell Exim about it by means of the tls_certificate
-# and tls_privatekey run time options. You also need to set tls_advertise_hosts
-# to specify the hosts to which Exim advertises TLS support. On the other hand,
-# if you are running Exim only as a client, building it with TLS support
-# is all you need to do.
-
-# Additional libraries and include files are required for both OpenSSL and
-# GnuTLS. The TLS_LIBS settings above assume that the libraries are installed
-# with all your other libraries. If they are in a special directory, you may
-# need something like
-
-# TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto
-# or
-# TLS_LIBS=-L/opt/gnu/lib -lgnutls -ltasn1 -lgcrypt
-
-# TLS_LIBS is included only on the command for linking Exim itself, not on any
-# auxiliary programs. If the include files are not in a standard place, you can
-# set TLS_INCLUDE to specify where they are, for example:
-
-# TLS_INCLUDE=-I/usr/local/openssl/include/
-# or
-# TLS_INCLUDE=-I/opt/gnu/include
-
-# You don't need to set TLS_INCLUDE if the relevant directories are already
-# specified in INCLUDE.
-
-
-#------------------------------------------------------------------------------
-# The default distribution of Exim contains only the plain text form of the
-# documentation. Other forms are available separately. If you want to install
-# the documentation in "info" format, first fetch the Texinfo documentation
-# sources from the ftp directory and unpack them, which should create files
-# with the extension "texinfo" in the doc directory. You may find that the
-# version number of the texinfo files is different to your Exim version number,
-# because the main documentation isn't updated as often as the code. For
-# example, if you have Exim version 4.43, the source tarball upacks into a
-# directory called exim-4.43, but the texinfo tarball unpacks into exim-4.40.
-# In this case, move the contents of exim-4.40/doc into exim-4.43/doc after you
-# have unpacked them. Then set INFO_DIRECTORY to the location of your info
-# directory. This varies from system to system, but is often /usr/share/info.
-# Once you have done this, "make install" will build the info files and
-# install them in the directory you have defined.
-
-# INFO_DIRECTORY=/usr/share/info
-
-
-#------------------------------------------------------------------------------
-# Exim log directory and files: Exim creates several log files inside a
-# single log directory. You can define the directory and the form of the
-# log file name here. If you do not set anything, Exim creates a directory
-# called "log" inside its spool directory (see SPOOL_DIRECTORY above) and uses
-# the filenames "mainlog", "paniclog", and "rejectlog". If you want to change
-# this, you can set LOG_FILE_PATH to a path name containing one occurrence of
-# %s. This will be replaced by one of the strings "main", "panic", or "reject"
-# to form the final file names. Some installations may want something like this:
-
-LOG_FILE_PATH=/var/log/exim/%s.log
-
-# which results in files with names /var/log/exim_mainlog, etc. The directory
-# in which the log files are placed must exist; Exim does not try to create
-# it for itself. It is also your responsibility to ensure that Exim is capable
-# of writing files using this path name. The Exim user (see EXIM_USER above)
-# must be able to create and update files in the directory you have specified.
-
-# You can also configure Exim to use syslog, instead of or as well as log
-# files, by settings such as these
-
-# LOG_FILE_PATH=syslog
-# LOG_FILE_PATH=syslog:/var/log/exim_%slog
-
-# The first of these uses only syslog; the second uses syslog and also writes
-# to log files. Do not include white space in such a setting as it messes up
-# the building process.
-
-
-#------------------------------------------------------------------------------
-# When logging to syslog, the following option caters for syslog replacements
-# that are able to accept log entries longer than the 1024 characters allowed
-# by RFC 3164. It is up to you to make sure your syslog daemon can handle this.
-# Non-printable characters are usually unacceptable regardless, so log entries
-# are still split on newline characters.
-
-# SYSLOG_LONG_LINES=yes
-
-# If you are not interested in the process identifier (pid) of the Exim that is
-# making the call to syslog, then comment out the following line.
-
-SYSLOG_LOG_PID=yes
-
-
-#------------------------------------------------------------------------------
-# Cycling log files: this variable specifies the maximum number of old
-# log files that are kept by the exicyclog log-cycling script. You don't have
-# to use exicyclog. If your operating system has other ways of cycling log
-# files, you can use them instead. The exicyclog script isn't run by default;
-# you have to set up a cron job for it if you want it.
-
-EXICYCLOG_MAX=10
-
-
-#------------------------------------------------------------------------------
-# The compress command is used by the exicyclog script to compress old log
-# files. Both the name of the command and the suffix that it adds to files
-# need to be defined here. See also the EXICYCLOG_MAX configuration.
-
-COMPRESS_COMMAND=/usr/bin/gzip
-COMPRESS_SUFFIX=gz
-
-
-#------------------------------------------------------------------------------
-# If the exigrep utility is fed compressed log files, it tries to uncompress
-# them using this command.
-
-ZCAT_COMMAND=/usr/bin/zcat
-
-
-#------------------------------------------------------------------------------
-# Compiling in support for embedded Perl: If you want to be able to
-# use Perl code in Exim's string manipulation language and you have Perl
-# (version 5.004 or later) installed, set EXIM_PERL to perl.o. Using embedded
-# Perl costs quite a lot of resources. Only do this if you really need it.
-
-# EXIM_PERL=perl.o
-
-
-#------------------------------------------------------------------------------
-# Support for dynamically-loaded string expansion functions via ${dlfunc. If
-# you are using gcc the dynamically-loaded object must be compiled with the
-# -shared option, and you will need to add -export-dynamic to EXTRALIBS so
-# that the local_scan API is made available by the linker. You may also need
-# to add -ldl to EXTRALIBS so that dlopen() is available to Exim.
-
-# EXPAND_DLFUNC=yes
-
-
-#------------------------------------------------------------------------------
-# Exim has support for PAM (Pluggable Authentication Modules), a facility
-# which is available in the latest releases of Solaris and in some GNU/Linux
-# distributions (see http://ftp.kernel.org/pub/linux/libs/pam/). The Exim
-# support, which is intended for use in conjunction with the SMTP AUTH
-# facilities, is included only when requested by the following setting:
-
-# SUPPORT_PAM=yes
-
-# You probably need to add -lpam to EXTRALIBS, and in some releases of
-# GNU/Linux -ldl is also needed.
-
-
-#------------------------------------------------------------------------------
-# Support for authentication via Radius is also available. The Exim support,
-# which is intended for use in conjunction with the SMTP AUTH facilities,
-# is included only when requested by setting the following parameter to the
-# location of your Radius configuration file:
-
-# RADIUS_CONFIG_FILE=/etc/radiusclient/radiusclient.conf
-# RADIUS_CONFIG_FILE=/etc/radius.conf
-
-# If you have set RADIUS_CONFIG_FILE, you should also set one of these to
-# indicate which RADIUS library is used:
-
-# RADIUS_LIB_TYPE=RADIUSCLIENT
-# RADIUS_LIB_TYPE=RADIUSCLIENTNEW
-# RADIUS_LIB_TYPE=RADLIB
-
-# RADIUSCLIENT is the radiusclient library; you probably need to add
-# -lradiusclient to EXTRALIBS.
-#
-# The API for the radiusclient library was changed at release 0.4.0.
-# Unfortunately, the header file does not define a version number that clients
-# can use to support both the old and new APIs. If you are using version 0.4.0
-# or later of the radiusclient library, you should use RADIUSCLIENTNEW.
-#
-# RADLIB is the Radius library that comes with FreeBSD (the header file is
-# called radlib.h); you probably need to add -lradius to EXTRALIBS.
-#
-# If you do not set RADIUS_LIB_TYPE, Exim assumes the radiusclient library,
-# using the original API.
-
-
-#------------------------------------------------------------------------------
-# Support for authentication via the Cyrus SASL pwcheck daemon is available.
-# Note, however, that pwcheck is now deprecated in favour of saslauthd (see
-# next item). The Exim support for pwcheck, which is intented for use in
-# conjunction with the SMTP AUTH facilities, is included only when requested by
-# setting the following parameter to the location of the pwcheck daemon's
-# socket.
-#
-# There is no need to install all of SASL on your system. You just need to run
-# ./configure --with-pwcheck, cd to the pwcheck directory within the sources,
-# make and make install. You must create the socket directory (default
-# /var/pwcheck) and chown it to exim's user and group. Once you have installed
-# pwcheck, you should arrange for it to be started by root at boot time.
-
-# CYRUS_PWCHECK_SOCKET=/var/pwcheck/pwcheck
-
-
-#------------------------------------------------------------------------------
-# Support for authentication via the Cyrus SASL saslauthd daemon is available.
-# The Exim support, which is intented for use in conjunction with the SMTP AUTH
-# facilities, is included only when requested by setting the following
-# parameter to the location of the saslauthd daemon's socket.
-#
-# There is no need to install all of SASL on your system. You just need to run
-# ./configure --with-saslauthd (and any other options you need, for example, to
-# select or deselect authentication mechanisms), cd to the saslauthd directory
-# within the sources, make and make install. You must create the socket
-# directory (default /var/state/saslauthd) and chown it to exim's user and
-# group. Once you have installed saslauthd, you should arrange for it to be
-# started by root at boot time.
-
-# CYRUS_SASLAUTHD_SOCKET=/var/state/saslauthd/mux
-
-
-#------------------------------------------------------------------------------
-# TCP wrappers: If you want to use tcpwrappers from within Exim, uncomment
-# this setting. See the manual section entitled "Use of tcpwrappers" in the
-# chapter on building and installing Exim.
-#
-#USE_TCP_WRAPPERS=yes
-#
-# You may well also have to specify a local "include" file and an additional
-# library for TCP wrappers, so you probably need something like this:
-#
-USE_TCP_WRAPPERS=yes
-CFLAGS=-O -I/usr/include
-EXTRALIBS_EXIM=-lwrap
-#
-# but of course there may need to be other things in CFLAGS and EXTRALIBS_EXIM
-# as well.
-
-
-#------------------------------------------------------------------------------
-# The default action of the exim_install script (which is run by "make
-# install") is to install the Exim binary with a unique name such as
-# exim-4.43-1, and then set up a symbolic link called "exim" to reference it,
-# moving the symbolic link from any previous version. If you define NO_SYMLINK
-# (the value doesn't matter), the symbolic link is not created or moved. You
-# will then have to "turn Exim on" by setting up the link manually.
-
-# NO_SYMLINK=yes
-
-
-#------------------------------------------------------------------------------
-# Another default action of the install script is to install a default runtime
-# configuration file if one does not exist. This configuration has a router for
-# expanding system aliases. The default assumes that these aliases are kept
-# in the traditional file called /etc/aliases. If such a file does not exist,
-# the installation script creates one that contains just comments (no actual
-# aliases). The following setting can be changed to specify a different
-# location for the system alias file.
-
-SYSTEM_ALIASES_FILE=/etc/aliases
-
-
-#------------------------------------------------------------------------------
-# There are some testing options (-be, -bt, -bv) that read data from the
-# standard input when no arguments are supplied. By default, the input lines
-# are read using the standard fgets() function. This does not support line
-# editing during interactive input (though the terminal's "erase" character
-# works as normal). If your operating system has the readline() function, and
-# in addition supports dynamic loading of library functions, you can cause
-# Exim to use readline() for the -be testing option (only) by uncommenting the
-# following setting. Dynamic loading is used so that the library is loaded only
-# when the -be testing option is given; by the time the loading occurs,
-# Exim has given up its root privilege and is running as the calling user. This
-# is the reason why readline() is NOT supported for -bt and -bv, because Exim
-# runs as root or as exim, respectively, for those options. When USE_READLINE
-# is "yes", as well as supporting line editing, a history of input lines in the
-# current run is maintained.
-
-# USE_READLINE=yes
-
-# You may need to add -ldl to EXTRALIBS when you set USE_READLINE=yes.
-# Note that this option adds to the size of the Exim binary, because the
-# dynamic loading library is not otherwise included.
-
-
-
-###############################################################################
-# THINGS YOU ALMOST NEVER NEED TO MENTION #
-###############################################################################
-
-# The settings in this section are available for use in special circumstances.
-# In the vast majority of installations you need not change anything below.
-
-
-#------------------------------------------------------------------------------
-# The following commands live in different places in some OS. Either the
-# ultimate default settings, or the OS-specific files should already point to
-# the right place, but they can be overridden here if necessary. These settings
-# are used when building various scripts to ensure that the correct paths are
-# used when the scripts are run. They are not used in the Makefile itself. Perl
-# is not necessary for running Exim unless you set EXIM_PERL (see above) to get
-# it embedded, but there are some utilities that are Perl scripts. If you
-# haven't got Perl, Exim will still build and run; you just won't be able to
-# use those utilities.
-
-# CHOWN_COMMAND=/usr/bin/chown
-# CHGRP_COMMAND=/usr/bin/chgrp
-# MV_COMMAND=/bin/mv
-# RM_COMMAND=/bin/rm
-# PERL_COMMAND=/usr/bin/perl
-
-
-#------------------------------------------------------------------------------
-# The following macro can be used to change the command for building a library
-# of functions. By default the "ar" command is used, with options "cq".
-# Only in rare circumstances should you need to change this.
-
-# AR=ar cq
-
-
-#------------------------------------------------------------------------------
-# In some operating systems, the value of the TMPDIR environment variable
-# controls where temporary files are created. Exim does not make use of
-# temporary files, except when delivering to MBX mailboxes. However, if Exim
-# calls any external libraries (e.g. DBM libraries), they may use temporary
-# files, and thus be influenced by the value of TMPDIR. For this reason, when
-# Exim starts, it checks the environment for TMPDIR, and if it finds it is set,
-# it replaces the value with what is defined here. Commenting this setting
-# suppresses the check altogether.
-
-TMPDIR="/tmp"
-
-
-#------------------------------------------------------------------------------
-# The following macros can be used to change the default modes that are used
-# by the appendfile transport. In most installations the defaults are just
-# fine, and in any case, you can change particular instances of the transport
-# at run time if you want.
-
-# APPENDFILE_MODE=0600
-# APPENDFILE_DIRECTORY_MODE=0700
-# APPENDFILE_LOCKFILE_MODE=0600
-
-
-#------------------------------------------------------------------------------
-# In some installations there may be multiple machines sharing file systems,
-# where a different configuration file is required for Exim on the different
-# machines. If CONFIGURE_FILE_USE_NODE is defined, then Exim will first look
-# for a configuration file whose name is that defined by CONFIGURE_FILE,
-# with the node name obtained by uname() tacked on the end, separated by a
-# period (for example, /usr/exim/configure.host.in.some.domain). If this file
-# does not exist, then the bare configuration file name is tried.
-
-# CONFIGURE_FILE_USE_NODE=yes
-
-
-#------------------------------------------------------------------------------
-# In some esoteric configurations two different versions of Exim are run,
-# with different setuid values, and different configuration files are required
-# to handle the different cases. If CONFIGURE_FILE_USE_EUID is defined, then
-# Exim will first look for a configuration file whose name is that defined
-# by CONFIGURE_FILE, with the effective uid tacked on the end, separated by
-# a period (for eximple, /usr/exim/configure.0). If this file does not exist,
-# then the bare configuration file name is tried. In the case when both
-# CONFIGURE_FILE_USE_EUID and CONFIGURE_FILE_USE_NODE are set, four files
-# are tried: <name>.<euid>.<node>, <name>.<node>, <name>.<euid>, and <name>.
-
-# CONFIGURE_FILE_USE_EUID=yes
-
-
-#------------------------------------------------------------------------------
-# The size of the delivery buffers: These specify the sizes (in bytes) of
-# the buffers that are used when copying a message from the spool to a
-# destination. There is rarely any need to change these values.
-
-# DELIVER_IN_BUFFER_SIZE=8192
-# DELIVER_OUT_BUFFER_SIZE=8192
-
-
-#------------------------------------------------------------------------------
-# The mode of the database directory: Exim creates a directory called "db"
-# in its spool directory, to hold its databases of hints. This variable
-# determines the mode of the created directory. The default value in the
-# source is 0750.
-
-# EXIMDB_DIRECTORY_MODE=0750
-
-
-#------------------------------------------------------------------------------
-# Database file mode: The mode of files created in the "db" directory defaults
-# to 0640 in the source, and can be changed here.
-
-# EXIMDB_MODE=0640
-
-
-#------------------------------------------------------------------------------
-# Database lock file mode: The mode of zero-length files created in the "db"
-# directory to use for locking purposes defaults to 0640 in the source, and
-# can be changed here.
-
-# EXIMDB_LOCKFILE_MODE=0640
-
-
-#------------------------------------------------------------------------------
-# This parameter sets the maximum length of the header portion of a message
-# that Exim is prepared to process. The default setting is one megabyte. The
-# limit exists in order to catch rogue mailers that might connect to your SMTP
-# port, start off a header line, and then just pump junk at it for ever. The
-# message_size_limit option would also catch this, but it may not be set.
-# The value set here is the default; it can be changed at runtime.
-
-# HEADER_MAXSIZE="(1024*1024)"
-
-
-#------------------------------------------------------------------------------
-# The mode of the input directory: The input directory is where messages are
-# kept while awaiting delivery. Exim creates it if necessary, using a mode
-# which can be defined here (default 0750).
-
-# INPUT_DIRECTORY_MODE=0750
-
-
-#------------------------------------------------------------------------------
-# The mode of Exim's log directory, when it is created by Exim inside the spool
-# directory, defaults to 0750 but can be changed here.
-
-# LOG_DIRECTORY_MODE=0750
-
-
-#------------------------------------------------------------------------------
-# The log files themselves are created as required, with a mode that defaults
-# to 0640, but which can be changed here.
-
-# LOG_MODE=0640
-
-
-#------------------------------------------------------------------------------
-# The TESTDB lookup is for performing tests on the handling of lookup results,
-# and is not useful for general running. It should be included only when
-# debugging the code of Exim.
-
-# LOOKUP_TESTDB=yes
-
-
-#------------------------------------------------------------------------------
-# /bin/sh is used by default as the shell in which to run commands that are
-# defined in the makefiles. This can be changed if necessary, by uncommenting
-# this line and specifying another shell, but note that a Bourne-compatible
-# shell is expected.
-
-# MAKE_SHELL=/bin/sh
-
-
-#------------------------------------------------------------------------------
-# The maximum number of named lists of each type (address, domain, host, and
-# local part) can be increased by changing this value. It should be set to
-# a multiple of 16.
-
-# MAX_NAMED_LIST=16
-
-
-#------------------------------------------------------------------------------
-# Network interfaces: Unless you set the local_interfaces option in the runtime
-# configuration file to restrict Exim to certain interfaces only, it will run
-# code to find all the interfaces there are on your host. Unfortunately,
-# the call to the OS that does this requires a buffer large enough to hold
-# data for all the interfaces - it was designed in the days when a host rarely
-# had more than three or four interfaces. Nowadays hosts can have very many
-# virtual interfaces running on the same hardware. If you have more than 250
-# virtual interfaces, you will need to uncomment this setting and increase the
-# value.
-
-# MAXINTERFACES=250
-
-
-#------------------------------------------------------------------------------
-# Per-message logs: While a message is in the process of being delivered,
-# comments on its progress are written to a message log, for the benefit of
-# human administrators. These logs are held in a directory called "msglog"
-# in the spool directory. Its mode defaults to 0750, but can be changed here.
-# The message log directory is also used for storing files that are used by
-# transports for returning data to a message's sender (see the "return_output"
-# option for transports).
-
-# MSGLOG_DIRECTORY_MODE=0750
-
-
-#------------------------------------------------------------------------------
-# There are three options which are used when compiling the Perl interface and
-# when linking with Perl. The default values for these are placed automatically
-# at the head of the Makefile by the script which builds it. However, if you
-# want to override them, you can do so here.
-
-# PERL_CC=
-# PERL_CCOPTS=
-# PERL_LIBS=
-
-
-#------------------------------------------------------------------------------
-# Identifying the daemon: When an Exim daemon starts up, it writes its pid
-# (process id) to a file so that it can easily be identified. The path of the
-# file can be specified here. Some installations may want something like this:
-
-PID_FILE_PATH=/var/run/exim.pid
-
-# If PID_FILE_PATH is not defined, Exim writes a file in its spool directory
-# using the name "exim-daemon.pid".
-
-# If you start up a daemon without the -bd option (for example, with just
-# the -q15m option), a pid file is not written. Also, if you override the
-# configuration file with the -oX option, no pid file is written. In other
-# words, the pid file is written only for a "standard" daemon.
-
-
-#------------------------------------------------------------------------------
-# If Exim creates the spool directory, it is given this mode, defaulting in the
-# source to 0750.
-
-# SPOOL_DIRECTORY_MODE=0750
-
-
-#------------------------------------------------------------------------------
-# The mode of files on the input spool which hold the contents of messages can
-# be changed here. The default is 0640 so that information from the spool is
-# available to anyone who is a member of the Exim group.
-
-# SPOOL_MODE=0640
-
-
-#------------------------------------------------------------------------------
-# Moving frozen messages: If the following is uncommented, Exim is compiled
-# with support for automatically moving frozen messages out of the main spool
-# directory, a facility that is found useful by some large installations. A
-# run time option is required to cause the moving actually to occur. Such
-# messages become "invisible" to the normal management tools.
-
-# SUPPORT_MOVE_FROZEN_MESSAGES=yes
-
-
-#------------------------------------------------------------------------------
-# Disabling the use of fsync(): DO NOT UNCOMMENT THE FOLLOWING LINE unless you
-# really, really, really know what you are doing. And even then, think again.
-# You should never uncomment this when compiling a binary for distribution.
-# Use it only when compiling Exim for your own use.
-#
-# Uncommenting this line enables the use of a runtime option called
-# disable_fsync, which can be used to stop Exim using fsync() to ensure that
-# files are written to disc before proceeding. When this is disabled, crashes
-# and hardware problems such as power outages can cause data to be lost. This
-# feature should only be used in very exceptional circumstances. YOU HAVE BEEN
-# WARNED.
-
-# ENABLE_DISABLE_FSYNC=yes
-
-# End of EDITME for Exim 4.
diff --git a/network/exim/exim.SlackBuild b/network/exim/exim.SlackBuild
deleted file mode 100644
index 3c2dd64f10..0000000000
--- a/network/exim/exim.SlackBuild
+++ /dev/null
@@ -1,123 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for Exim
-# http://www.exim.org/
-# Copyright 2008 Thales A. Tsailas (ttsailas@enforcingit.com)
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# *Extensively* edited by the SlackBuilds.org project. -michiel.
-
-PRGNAM=exim
-VERSION=4.69
-ARCH=${ARCH:-i486}
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-EXIMUSER=${EXIMUSER:-exim}
-EXIMGROUP=${EXIMGROUP:-exim}
-EXIMUID=${EXIMUID:-222}
-EXIMGID=${EXIMGID:-222}
-
-if [ "$ARCH" = "i486" ]; then
- SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-elif [ "$ARCH" = "i686" ]; then
- SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2 -fPIC"
-fi
-
-# Exit on most errors
-set -e
-
-# Check if the exim and user group exist. If not, then bail
-if ! grep ^${EXIMGROUP}: /etc/group 2>&1 > /dev/null; then
-cat << EOF
-
- You must have a ${EXIMGROUP} group to run this script.
- For example: groupadd -g ${EXIMGID} ${EXIMGROUP}
-
-EOF
- exit
-elif ! grep ^${EXIMUSER}: /etc/passwd 2>&1 > /dev/null; then
- cat << EOF
-
- You must have a ${EXIMUSER} user to run this script.
- For example: useradd -u ${EXIMUID} -d /var/spool/exim -s /bin/false -g ${EXIMGROUP} ${EXIMUSER}
-
-EOF
- exit
-fi
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-$VERSION
-tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
-cd $PRGNAM-$VERSION
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-# Set the right compiler flags and settings.
-# Edit {exim,eximon.Makefile} if you want to change any of these.
-sed -e "s/#SLKCFLAGS#/$SLKCFLAGS/" $CWD/exim.Makefile > $TMP/$PRGNAM-$VERSION/Local/Makefile
-sed -e "s/#SLKCFLAGS#/$SLKCFLAGS/" $CWD/eximon.Makefile > $TMP/$PRGNAM-$VERSION/Local/eximon.conf
-
-make all
-make install DESTDIR=$PKG
-
-( cd $PKG
- find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
- find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/usr/man/man8
-cat doc/$PRGNAM.8 > $PKG/usr/man/man8/$PRGNAM.8
-gzip -9 $PKG/usr/man/man8/$PRGNAM.8
-
-mkdir -p $PKG/etc/{logrotate.d,rc.d}
-cat $CWD/rc.exim.new > $PKG/etc/rc.d/rc.exim.new
-cat $CWD/$PRGNAM.logrotate > $PKG/etc/logrotate.d/$PRGNAM
-mv $PKG/etc/exim/exim.conf $PKG/etc/exim/exim.conf.new
-mv $PKG/etc/aliases $PKG/etc/aliases.new
-
-mkdir -p $PKG/var/log/exim
-mkdir -p -m 0750 $PKG/var/spool/exim/
-mkdir -p -m 0750 $PKG/var/spool/exim/{db,input,msglog}
-chown -R $EXIMUSER:$EXIMGROUP $PKG/var/{log,spool}/exim
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a ABOUT ACKNOWLEDGMENTS LICENCE CHANGES doc/* $PKG/usr/doc/$PRGNAM-$VERSION
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-cat $CWD/doinst.sh > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz
diff --git a/network/exim/exim.info b/network/exim/exim.info
deleted file mode 100644
index e502cf107d..0000000000
--- a/network/exim/exim.info
+++ /dev/null
@@ -1,8 +0,0 @@
-PRGNAM="exim"
-VERSION="4.69"
-HOMEPAGE="http://www.exim.org/"
-DOWNLOAD="ftp://ftp.exim.org/pub/exim/exim4/exim-4.69.tar.gz"
-MD5SUM="56e8db1dfe31e0ee4cef85e8940ceedc"
-MAINTAINER="Thales A. Tsailas"
-EMAIL="ttsailas@enforcingit.com"
-APPROVED="michiel"
diff --git a/network/exim/exim.logrotate b/network/exim/exim.logrotate
deleted file mode 100644
index 4e83629e2c..0000000000
--- a/network/exim/exim.logrotate
+++ /dev/null
@@ -1,7 +0,0 @@
-# daemon does not need restarting after log rotate
-/var/log/exim/*log {
- missingok
- notifempty
- delaycompress
-}
-
diff --git a/network/exim/eximon.Makefile b/network/exim/eximon.Makefile
deleted file mode 100644
index 8560ea7c4b..0000000000
--- a/network/exim/eximon.Makefile
+++ /dev/null
@@ -1,182 +0,0 @@
-# $Cambridge: exim/exim-src/exim_monitor/EDITME,v 1.1 2004/10/07 10:39:01 ph10 Exp $
-
-##################################################
-# The Exim Monitor #
-##################################################
-
-# This is the template for the Exim monitor's main build-time configuration
-# file. It contains settings that are independent of any operating system. It
-# should be edited and then saved to a file called Local/eximon.conf before
-# running the make command to build the monitor, if any settings are required.
-# Local/eximon.conf can be empty if no changes are needed. The examples given
-# here (commented out) are the default settings.
-
-# Any settings made in the configuration file can be overridden at run time
-# by setting up an environment variable with the same name as any of these
-# options, but preceded by EXIMON_, for example, EXIMON_WINDOW_TITLE.
-
-CFLAGS="##SLKCFLAGS#"
-
-##################################################################
-# Set these variables as appropriate for your system #
-##################################################################
-
-# The qualifying name for your domain. The only use made of this is for
-# testing that certain addresses are the same when displaying the
-# log tail, and for shortening sender addresses in the queue display.
-
-# QUALIFY_DOMAIN=
-
-# The default minimum width and height for the whole window are 103 and
-# 162 pixels respectively. This is enough to hold the left-most stripchart
-# and the quit button. The values can be changed here.
-
-# MIN_HEIGHT=162
-# MIN_WIDTH=103
-
-# If you uncomment the following setting, the window will start up at
-# its minimum size, instead of the default maximum. There may be a quick
-# flash during the start-up process. Defining it this way allows it to be
-# overridden by an environment variable.
-
-# START_SMALL=${EXIMON_START_SMALL-yes}
-
-# The title for eximon's main display window. It is possible to have
-# host name of the machine you are running on substituted into the
-# title string. If you include the string ${fullhostname} then the
-# complete name is used. If you include ${hostname} then the full
-# host name will have the string contained in the DOMAIN variable
-# stripped from its right-hand end before being substituted. Any other
-# shell or environment variables may also be included.
-
-# If you use any substitutions, remember to ensure that the $ and {}
-# characters are escaped from the shell, e.g. by using single quotes.
-
-# WINDOW_TITLE="${hostname} eximon"
-
-# The domain that you want to be stripped from the machine's full hostname
-# when forming the short host name for the eximon window title, as
-# described above.
-
-# DOMAIN=
-
-# Parameters for the rolling display of the tail of the exim log file.
-# The width and depth are measured in pixels; LOG_BUFFER specifies the
-# amount of store to set aside for holding the log tail, which is displayed
-# in a scrolling window. When this store is full, the earlier 50% of it
-# is discarded - this is much more efficient that throwing it away line
-# by line. The number given can be followed by the letter K to indicate
-# that the value is in kilobytes. A minimum value of 1K is enforced.
-
-# LOG_DEPTH=300
-# LOG_WIDTH=950
-# LOG_BUFFER=20K
-
-# The font which is used in the log tail display. This is defined in
-# the normal X manner. It must be a "character cell" font, because this
-# is required by the text widget.
-
-# LOG_FONT=-misc-fixed-medium-r-normal-*-14-140-*-*-*-*-iso8859-1
-
-# Parameters for the display of message that are on the exim queue.
-# The width and depth are measured in pixels.
-
-# QUEUE_DEPTH=200
-# QUEUE_WIDTH=950
-
-# The font which is used in the queue display.
-
-# QUEUE_FONT=$LOG_FONT
-
-# When a message has more than one undelivered address, they are listed
-# one below the other. A limit can be placed on the number of addresses
-# displayed for any one message. If there are more, then "..." is used
-# to indicate this.
-
-# QUEUE_MAX_ADDRESSES=10
-
-# The display of the contents of the queue is updated every QUEUE_INTERVAL
-# seconds by default (there is a button to request update).
-
-# QUEUE_INTERVAL=300
-
-# The size of the popup text window that is used for looking at the
-# contents of messages, etc.
-
-# TEXT_DEPTH=200
-
-# The keystroke/mouse-operation that is used to pop up the menu in the
-# queue window is configurable. The default is Shift with the lefthand
-# mouse button. The name of an alternative can be specified in the standard
-# X way of naming these things. With the default configuration for the monitor,
-# individuals can override this by setting the EXIMON_MENU_EVENT environment
-# variable.
-
-# MENU_EVENT='Shift<Btn1Down>'
-
-# When the menu is used to perform an operation on a message, the result of the
-# operation is normally visible in the log window, so Eximon doesn't display
-# the output of the generated Exim command. However, you can request that
-# this output be shown in a separate window by setting ACTION_OUTPUT to "yes".
-# This does not apply to the output generated from attempting to deliver a
-# message, which is always shown.
-
-# ACTION_OUTPUT=no
-
-# When some action is taken on a message, such as freezing it, or changing
-# its recipients, the queue display is normally automatically updated. On
-# systems that have very large queues, this can take some time and be dis-
-# tracting. If this option is set to "no", the queue display is no longer
-# automatically updated after an action is applied to a message.
-
-# ACTION_QUEUE_UPDATE=yes
-
-# When the menu item to display a message's body is invoked, the amount
-# of data is limited to BODY_MAX bytes. This limit is a safety precaution
-# to save the screen scrolling for ever on an enormous message.
-
-# BODY_MAX=20000
-
-# The stripcharts are updated every STRIPCHART_INTERVAL seconds.
-
-# STRIPCHART_INTERVAL=60
-
-# A stripchart showing the count of messages in the queue is always
-# displayed on the left of eximon's window. Its name is "queue" by
-# default, but can be changed by this variable.
-
-# QUEUE_STRIPCHART_NAME=queue
-
-# The following variable may be set to the name of a disc partition. If
-# it is, a stripchart showing the percentage fullness of the partition
-# will be displayed as the second stripchart. This can be used to keep
-# a display of a mail spool partition on the screen.
-
-# SIZE_STRIPCHART=/var/mail
-
-# The name of the size stripchart will be the last component of SIZE_STRIPCHART
-# unless the following variable is set to override it.
-
-# SIZE_STRIPCHART_NAME=space
-
-# The following variable contains a specification of which stripcharts
-# you want eximon to display based on log entries. The string consists of
-# pairs of strings, delimited by slash characters. The first string in each
-# pair is a regular expression that matches some distinguishing feature in a
-# exim log entry.
-
-# Entries that match the expression will be counted and displayed in a
-# stripchart whose title is given by the second string. The string may
-# be continued over several input lines, provided that it is split
-# after a slash, and an additional slash (optionally preceded by white
-# space) is included at the start of the continuation line.
-
-# Stripcharts configured by the following parameter are displayed to the
-# right of the queue and size stripcharts, in the order defined here.
-
-# LOG_STRIPCHARTS='/ <= /in/
-# / => /out/
-# / => .+ R=local/local/
-# / => .+ T=[^ ]*smtp/smtp/'
-
-# End of exim_monitor/EDITME
diff --git a/network/exim/rc.exim.new b/network/exim/rc.exim.new
deleted file mode 100644
index 4902203dfb..0000000000
--- a/network/exim/rc.exim.new
+++ /dev/null
@@ -1,61 +0,0 @@
-#!/bin/sh
-
-# /etc/rc.d/rc.exim - start/stop/restart the exim mail transfer agent.
-# To make exim start automatically at boot, make this
-# file executable: chmod 755 /etc/rc.d/rc.exim
-#
-# Thales A. Tsailas <ttsailas@enforcingit.com>
-
-PIDFILE=/var/run/exim.pid
-
-# the TIME option causes Exim to run as a daemon, starting a queue runner
-# process at intervals specified by the given time value. (ie 5m, 1h etc).
-TIME=15m
-
-exim_start() {
- # Make sure that we have the right ownerships permissions.
- if [ -f /var/log/exim/main.log ]; then
- if [ "exim" != "$(/bin/stat -c%G /var/log/exim/main.log)" ]; then
- chown -R exim:exim /var/{log,spool}/exim
- fi
- fi
-
- # Lets start the Exim daemon
- echo -en "Starting exim... \n"
- /usr/sbin/exim -bd -q$TIME
-}
-
-exim_stop() {
- echo -en "Shutting down exim...\n"
- killall exim
- rm -f $PIDFILE
-}
-
-exim_status() {
- if [ -f /var/run/exim.pid ]; then
- echo "exim (pid: $(cat $PIDFILE) is running...";
- else
- echo "exim is not running...";
- fi
-}
-
-# See how we were called.
-case "$1" in
- start)
- exim_start
- ;;
- stop)
- exim_stop
- ;;
- restart)
- exim_stop
- sleep 2
- exim_start
- ;;
- status)
- status
- ;;
- *)
- echo $"Usage: $0 {start|stop|restart|status}"
- exit 1
-esac
diff --git a/network/exim/slack-desc b/network/exim/slack-desc
deleted file mode 100644
index c9cc9d3ae5..0000000000
--- a/network/exim/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
-# make exactly 11 lines for the formatting to be correct. It's also
-# customary to leave one space after the ':'.
-
- |-----handy-ruler------------------------------------------------------|
-exim: exim (the exim mail transfer agent)
-exim:
-exim: Exim is a mail transfer agent (MTA) used on Unix-like operating systems.
-exim: It is freely available under the GNU GPL and it aims to be a general
-exim: and flexible mailer with extensive facilities for checking incoming
-exim: e-mail. Exim was written by Philip Hazel for use in the University of
-exim: Cambridge Computing Service’s e-mail systems.
-exim:
-exim:
-exim: Homepage: http://www.exim.org/
-exim: