misc/temper: Removed (no SBo maintainer)

Nothing else in the repo needs this, so there's not any
good reason for us to continue carrying it.

Signed-off-by: Robby Workman <rworkman@slackbuilds.org>

5 files changed, 0 insertions, 204 deletions

diff --git a/misc/temper/README b/misc/temper/README
deleted file mode 100644
index fe02e73bd3..0000000000
--- a/misc/temper/README
+++ /dev/null
@@ -1,10 +0,0 @@
-TEMPer Temperature Sensor Linux Driver
-
-TEMPer USB Thermometer interface driver and utility. 
-
-The temper binary outputs temperatures as measured by the USB thermometer.
-
-The code has been patched to work with the newest versions of the USB stick 
-with code corrections from the comments section of the homepage. Also 
-implemented changes for greater ease of parsing with standard tools (awk 
-etc.).
diff --git a/misc/temper/slack-desc b/misc/temper/slack-desc
deleted file mode 100644
index add4a36d51..0000000000
--- a/misc/temper/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.
-# Line up the first '|' above the ':' following the base package name, and
-# the '|' on the right side marks the last column you can put a character in.
-# You must make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':' except on otherwise blank lines.
-
-       |-----handy-ruler------------------------------------------------------|
-temper: TEMPer Temperature Sensor Linux Driver
-temper:
-temper: Driver and utility to output temperature readings from the TEMPer
-temper: USB thermometer. This is for the HID version of TEMPer (not the
-temper: serial version).
-temper:
-temper:
-temper:
-temper:
-temper:
-temper:
diff --git a/misc/temper/temper-1.0.diff b/misc/temper/temper-1.0.diff
deleted file mode 100644
index 4f9943aad0..0000000000
--- a/misc/temper/temper-1.0.diff
+++ /dev/null
@@ -1,70 +0,0 @@
---- temper-1.0/temper.c	2009-10-17 08:26:46.000000000 +0100
-+++ temper-1.0.new/temper.c	2011-02-06 16:49:24.511084503 +0000
-@@ -49,7 +49,7 @@
- 
- 	t = calloc(1, sizeof(*t));
- 	t->device = dev;
--	t->debug = debug;
-+	t->debug = 0;
- 	t->timeout = timeout;
- 	t->handle = usb_open(t->device);
- 	if(!t->handle) {
-@@ -190,7 +190,7 @@
- int
- TemperGetTemperatureInC(Temper *t, float *tempC)
- {
--	char buf[256];
-+	unsigned char buf[256];
- 	int ret, temperature, i;
- 
- 	TemperSendCommand(t, 10, 11, 12, 13, 0, 0, 2, 0);
-@@ -204,9 +204,7 @@
- 		return -1;
- 	}
- 
--	temperature = (buf[1] & 0xFF) + (buf[0] << 8);	
--	temperature += 1152;			// calibration value
--	*tempC = temperature * (125.0 / 32000.0);
-+	*tempC=buf[0]+((float)buf[1])/256;
- 	return 0;
- }
- 
-@@ -253,29 +251,15 @@
- 	TemperSendCommand(t, 0, 0, 0, 0, 0, 0, 0, 0);
- */
- 
--	bzero(buf, 256);
--	ret = TemperGetOtherStuff(t, buf, 256);
--	printf("Other Stuff (%d bytes):\n", ret);
--	for(i = 0; i < ret; i++) {
--		printf(" %02x", buf[i] & 0xFF);
--		if(i % 16 == 15) {
--			printf("\n");
--		}
--	}
--	printf("\n");
--
--	for(;;) {
--		float tempc;
--
--		if(TemperGetTemperatureInC(t, &tempc) < 0) {
--			perror("TemperGetTemperatureInC");
--			exit(1);
--		}
--		printf("temperature %.2fF %.2fC\n", (9.0 / 5.0 * tempc + 32.0),
--		       tempc);
--		sleep(10);
--	}
--	return 0;
-+	float tempc;
-+
-+	if(TemperGetTemperatureInC(t, &tempc) < 0) {
-+		perror("TemperGetTemperatureInC");
-+		exit(1);
-+	}
-+	printf("temperature %.2fF %.2fC\n", (9.0 / 5.0 * tempc + 32.0),
-+		tempc);
-+    fflush(stdout); /* flush the stdout buffer */
- }
- 
- #endif
diff --git a/misc/temper/temper.SlackBuild b/misc/temper/temper.SlackBuild
deleted file mode 100644
index 9550863d8f..0000000000
--- a/misc/temper/temper.SlackBuild
+++ /dev/null
@@ -1,95 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for temper.
-#
-# Copyright 2011 Pierre Cazenave <pwcazenave {at} gmail [dot] com>
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PRGNAM=temper
-VERSION=${VERSION:-1.0}
-
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) ARCH=i486 ;;
-    arm*) ARCH=arm ;;
-       *) ARCH=$( uname -m ) ;;
-  esac
-fi
-
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-set -e
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-$VERSION
-tar xvf $CWD/$PRGNAM-$VERSION.tgz
-cd $PRGNAM-$VERSION
-chown -R root:root .
-chmod -R u+w,go+r-w,a-s .
-
-# Patch code for newer versions of the USB thermometer with suggestions from
-# homepage's comments. Patch also turns off debugging mode.
-patch -p1 < $CWD/$PRGNAM-$VERSION.diff
-
-export CFLAGS="$SLKCFLAGS"
-make clean
-make
-
-mkdir -p $PKG/usr/bin
-install -m 0755 temper $PKG/usr/bin
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-
-# Install the udev rule file.
-mkdir -p $PKG/lib/udev/rules.d
-install -m 644 99-tempsensor.rules $PKG/lib/udev/rules.d
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-cat $CWD/README > $PKG/usr/doc/$PRGNAM-$VERSION/README$TAG
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/misc/temper/temper.info b/misc/temper/temper.info
deleted file mode 100644
index 6ec5f52666..0000000000
--- a/misc/temper/temper.info
+++ /dev/null
@@ -1,10 +0,0 @@
-PRGNAM="temper"
-VERSION="1.0"
-HOMEPAGE="http://relavak.wordpress.com/2009/10/17/temper-temperature-sensor-linux-driver/"
-DOWNLOAD="http://www.relavak.com/downloads/temper-1.0.tgz"
-MD5SUM="aab4888f351e110e252335ab5dc143f4"
-DOWNLOAD_x86_64=""
-MD5SUM_x86_64=""
-REQUIRES=""
-MAINTAINER="Pierre Cazenave"
-EMAIL="pwcazenave <at> gmail {dot} com"