path: root/dom/media/MediaDecoderStateMachine.h

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/. */
/*

Each media element for a media file has one thread called the "audio thread".

The audio thread  writes the decoded audio data to the audio
hardware. This is done in a separate thread to ensure that the
audio hardware gets a constant stream of data without
interruption due to decoding or display. At some point
AudioStream will be refactored to have a callback interface
where it asks for data and this thread will no longer be
needed.

The element/state machine also has a TaskQueue which runs in a
SharedThreadPool that is shared with all other elements/decoders. The state
machine dispatches tasks to this to call into the MediaDecoderReader to
request decoded audio or video data. The Reader will callback with decoded
sampled when it has them available, and the state machine places the decoded
samples into its queues for the consuming threads to pull from.

The MediaDecoderReader can choose to decode asynchronously, or synchronously
and return requested samples synchronously inside it's Request*Data()
functions via callback. Asynchronous decoding is preferred, and should be
used for any new readers.

Synchronisation of state between the thread is done via a monitor owned
by MediaDecoder.

The lifetime of the audio thread is controlled by the state machine when
it runs on the shared state machine thread. When playback needs to occur
the audio thread is created and an event dispatched to run it. The audio
thread exits when audio playback is completed or no longer required.

A/V synchronisation is handled by the state machine. It examines the audio
playback time and compares this to the next frame in the queue of video
frames. If it is time to play the video frame it is then displayed, otherwise
it schedules the state machine to run again at the time of the next frame.

Frame skipping is done in the following ways:

  1) The state machine will skip all frames in the video queue whose
     display time is less than the current audio time. This ensures
     the correct frame for the current time is always displayed.

  2) The decode tasks will stop decoding interframes and read to the
     next keyframe if it determines that decoding the remaining
     interframes will cause playback issues. It detects this by:
       a) If the amount of audio data in the audio queue drops
          below a threshold whereby audio may start to skip.
       b) If the video queue drops below a threshold where it
          will be decoding video data that won't be displayed due
          to the decode thread dropping the frame immediately.
     TODO: In future we should only do this when the Reader is decoding
           synchronously.

When hardware accelerated graphics is not available, YCbCr conversion
is done on the decode task queue when video frames are decoded.

The decode task queue pushes decoded audio and videos frames into two
separate queues - one for audio and one for video. These are kept
separate to make it easy to constantly feed audio data to the audio
hardware while allowing frame skipping of video data. These queues are
threadsafe, and neither the decode, audio, or state machine should
be able to monopolize them, and cause starvation of the other threads.

Both queues are bounded by a maximum size. When this size is reached
the decode tasks will no longer request video or audio depending on the
queue that has reached the threshold. If both queues are full, no more
decode tasks will be dispatched to the decode task queue, so other
decoders will have an opportunity to run.

During playback the audio thread will be idle (via a Wait() on the
monitor) if the audio queue is empty. Otherwise it constantly pops
audio data off the queue and plays it with a blocking write to the audio
hardware (via AudioStream).

*/
#if !defined(MediaDecoderStateMachine_h__)
#define MediaDecoderStateMachine_h__

#include "mozilla/Attributes.h"
#include "mozilla/ReentrantMonitor.h"
#include "mozilla/StateMirroring.h"

#include "nsAutoPtr.h"
#include "nsThreadUtils.h"
#include "MediaDecoder.h"
#include "MediaDecoderReader.h"
#include "MediaDecoderOwner.h"
#include "MediaEventSource.h"
#include "MediaMetadataManager.h"
#include "MediaStatistics.h"
#include "MediaTimer.h"
#include "ImageContainer.h"
#include "SeekJob.h"
#include "SeekTask.h"
#include "MediaDecoderReaderWrapper.h"

namespace mozilla {

namespace media {
class MediaSink;
}

class AudioSegment;
class DecodedStream;
class MediaDecoderReaderWrapper;
class OutputStreamManager;
class TaskQueue;

extern LazyLogModule gMediaDecoderLog;
extern LazyLogModule gMediaSampleLog;

enum class MediaEventType : int8_t {
  PlaybackStarted,
  PlaybackStopped,
  PlaybackEnded,
  SeekStarted,
  Invalidate,
  EnterVideoSuspend,
  ExitVideoSuspend
};

/*
  The state machine class. This manages the decoding and seeking in the
  MediaDecoderReader on the decode task queue, and A/V sync on the shared
  state machine thread, and controls the audio "push" thread.

  All internal state is synchronised via the decoder monitor. State changes
  are propagated by scheduling the state machine to run another cycle on the
  shared state machine thread.

  See MediaDecoder.h for more details.
*/
class MediaDecoderStateMachine
{
  NS_INLINE_DECL_THREADSAFE_REFCOUNTING(MediaDecoderStateMachine)

  using TrackSet = MediaDecoderReader::TrackSet;

public:
  typedef MediaDecoderOwner::NextFrameStatus NextFrameStatus;
  typedef mozilla::layers::ImageContainer::FrameID FrameID;
  MediaDecoderStateMachine(MediaDecoder* aDecoder,
                           MediaDecoderReader* aReader);

  nsresult Init(MediaDecoder* aDecoder);

  void SetMediaDecoderReaderWrapperCallback();
  void CancelMediaDecoderReaderWrapperCallback();

  // Enumeration for the valid decoding states
  enum State {
    DECODER_STATE_DECODING_METADATA,
    DECODER_STATE_WAIT_FOR_CDM,
    DECODER_STATE_DORMANT,
    DECODER_STATE_DECODING_FIRSTFRAME,
    DECODER_STATE_DECODING,
    DECODER_STATE_SEEKING,
    DECODER_STATE_BUFFERING,
    DECODER_STATE_COMPLETED,
    DECODER_STATE_SHUTDOWN
  };

  void DumpDebugInfo();

  void AddOutputStream(ProcessedMediaStream* aStream,
                       TrackID aNextAvailableTrackID,
                       bool aFinishWhenEnded);
  // Remove an output stream added with AddOutputStream.
  void RemoveOutputStream(MediaStream* aStream);
  TrackID NextAvailableTrackIDFor(MediaStream* aOutputStream) const;

  // Seeks to the decoder to aTarget asynchronously.
  RefPtr<MediaDecoder::SeekPromise> InvokeSeek(SeekTarget aTarget);

  void DispatchSetPlaybackRate(double aPlaybackRate)
  {
    OwnerThread()->DispatchStateChange(NewRunnableMethod<double>(
      this, &MediaDecoderStateMachine::SetPlaybackRate, aPlaybackRate));
  }

  RefPtr<ShutdownPromise> BeginShutdown();

  // Notifies the state machine that should minimize the number of samples
  // decoded we preroll, until playback starts. The first time playback starts
  // the state machine is free to return to prerolling normally. Note
  // "prerolling" in this context refers to when we decode and buffer decoded
  // samples in advance of when they're needed for playback.
  void DispatchMinimizePrerollUntilPlaybackStarts()
  {
    RefPtr<MediaDecoderStateMachine> self = this;
    nsCOMPtr<nsIRunnable> r = NS_NewRunnableFunction([self] () -> void
    {
      MOZ_ASSERT(self->OnTaskQueue());
      self->mMinimizePreroll = true;

      // Make sure that this arrives before playback starts, otherwise this won't
      // have the intended effect.
      MOZ_DIAGNOSTIC_ASSERT(self->mPlayState == MediaDecoder::PLAY_STATE_LOADING);
    });
    OwnerThread()->Dispatch(r.forget());
  }

  // Set the media fragment end time. aEndTime is in microseconds.
  void DispatchSetFragmentEndTime(int64_t aEndTime)
  {
    RefPtr<MediaDecoderStateMachine> self = this;
    nsCOMPtr<nsIRunnable> r = NS_NewRunnableFunction([self, aEndTime] () {
      self->mFragmentEndTime = aEndTime;
    });
    OwnerThread()->Dispatch(r.forget());
  }

  void DispatchAudioOffloading(bool aAudioOffloading)
  {
    RefPtr<MediaDecoderStateMachine> self = this;
    nsCOMPtr<nsIRunnable> r = NS_NewRunnableFunction([=] () {
      if (self->mAudioOffloading != aAudioOffloading) {
        self->mAudioOffloading = aAudioOffloading;
        self->ScheduleStateMachine();
      }
    });
    OwnerThread()->Dispatch(r.forget());
  }

  // Drop reference to mResource. Only called during shutdown dance.
  void BreakCycles() {
    MOZ_ASSERT(NS_IsMainThread());
    mResource = nullptr;
  }

  TimedMetadataEventSource& TimedMetadataEvent() {
    return mMetadataManager.TimedMetadataEvent();
  }

  MediaEventSource<void>& OnMediaNotSeekable() const;

  MediaEventSourceExc<nsAutoPtr<MediaInfo>,
                      nsAutoPtr<MetadataTags>,
                      MediaDecoderEventVisibility>&
  MetadataLoadedEvent() { return mMetadataLoadedEvent; }

  MediaEventSourceExc<nsAutoPtr<MediaInfo>,
                      MediaDecoderEventVisibility>&
  FirstFrameLoadedEvent() { return mFirstFrameLoadedEvent; }

  MediaEventSource<MediaEventType>&
  OnPlaybackEvent() { return mOnPlaybackEvent; }
  MediaEventSource<MediaResult>&
  OnPlaybackErrorEvent() { return mOnPlaybackErrorEvent; }

  MediaEventSource<DecoderDoctorEvent>&
  OnDecoderDoctorEvent() { return mOnDecoderDoctorEvent; }

  size_t SizeOfVideoQueue() const;

  size_t SizeOfAudioQueue() const;

private:
  class StateObject;
  class DecodeMetadataState;
  class WaitForCDMState;
  class DormantState;
  class DecodingFirstFrameState;
  class DecodingState;
  class SeekingState;
  class BufferingState;
  class CompletedState;
  class ShutdownState;

  static const char* ToStateStr(State aState);
  static const char* ToStr(NextFrameStatus aStatus);
  const char* ToStateStr();

  // Functions used by assertions to ensure we're calling things
  // on the appropriate threads.
  bool OnTaskQueue() const;

  // Initialization that needs to happen on the task queue. This is the first
  // task that gets run on the task queue, and is dispatched from the MDSM
  // constructor immediately after the task queue is created.
  void InitializationTask(MediaDecoder* aDecoder);

  void SetAudioCaptured(bool aCaptured);

  RefPtr<MediaDecoder::SeekPromise> Seek(SeekTarget aTarget);

  RefPtr<ShutdownPromise> Shutdown();

  RefPtr<ShutdownPromise> FinishShutdown();

  // Update the playback position. This can result in a timeupdate event
  // and an invalidate of the frame being dispatched asynchronously if
  // there is no such event currently queued.
  // Only called on the decoder thread. Must be called with
  // the decode monitor held.
  void UpdatePlaybackPosition(int64_t aTime);

  bool CanPlayThrough();

  MediaStatistics GetStatistics();

  bool HasAudio() const { return mInfo.ref().HasAudio(); }
  bool HasVideo() const { return mInfo.ref().HasVideo(); }
  const MediaInfo& Info() const { return mInfo.ref(); }

  // Returns the state machine task queue.
  TaskQueue* OwnerThread() const { return mTaskQueue; }

  // Schedules the shared state machine thread to run the state machine.
  void ScheduleStateMachine();

  // Invokes ScheduleStateMachine to run in |aMicroseconds| microseconds,
  // unless it's already scheduled to run earlier, in which case the
  // request is discarded.
  void ScheduleStateMachineIn(int64_t aMicroseconds);

  bool HaveEnoughDecodedAudio();
  bool HaveEnoughDecodedVideo();

  // True if shutdown process has begun.
  bool IsShutdown() const;

  // Returns true if we're currently playing. The decoder monitor must
  // be held.
  bool IsPlaying() const;

  // TODO: Those callback function may receive demuxed-only data.
  // Need to figure out a suitable API name for this case.
  void OnAudioDecoded(MediaData* aAudio);
  void OnVideoDecoded(MediaData* aVideo, TimeStamp aDecodeStartTime);
  void OnNotDecoded(MediaData::Type aType, const MediaResult& aError);

  // Resets all state related to decoding and playback, emptying all buffers
  // and aborting all pending operations on the decode task queue.
  void Reset(TrackSet aTracks = TrackSet(TrackInfo::kAudioTrack,
                                         TrackInfo::kVideoTrack));
  // Sets mMediaSeekable to false.
  void SetMediaNotSeekable();

  void OnAudioCallback(AudioCallbackData aData);
  void OnVideoCallback(VideoCallbackData aData);
  void OnAudioWaitCallback(WaitCallbackData aData);
  void OnVideoWaitCallback(WaitCallbackData aData);

protected:
  virtual ~MediaDecoderStateMachine();

  void BufferedRangeUpdated();

  void ReaderSuspendedChanged();

  // Inserts MediaData* samples into their respective MediaQueues.
  // aSample must not be null.

  void Push(MediaData* aSample, MediaData::Type aSampleType);

  void OnAudioPopped(const RefPtr<MediaData>& aSample);
  void OnVideoPopped(const RefPtr<MediaData>& aSample);

  void AudioAudibleChanged(bool aAudible);

  void VolumeChanged();
  void SetPlaybackRate(double aPlaybackRate);
  void PreservesPitchChanged();

  MediaQueue<MediaData>& AudioQueue() { return mAudioQueue; }
  MediaQueue<MediaData>& VideoQueue() { return mVideoQueue; }

  // True if our buffers of decoded audio are not full, and we should
  // decode more.
  bool NeedToDecodeAudio();

  // True if our buffers of decoded video are not full, and we should
  // decode more.
  bool NeedToDecodeVideo();

  // True if we are low in decoded audio/video data.
  // May not be invoked when mReader->UseBufferingHeuristics() is false.
  bool HasLowDecodedData();

  bool HasLowDecodedAudio();

  bool HasLowDecodedVideo();

  bool OutOfDecodedAudio();

  bool OutOfDecodedVideo()
  {
    MOZ_ASSERT(OnTaskQueue());
    return IsVideoDecoding() && VideoQueue().GetSize() <= 1;
  }


  // Returns true if we're running low on buffered data.
  bool HasLowBufferedData();

  // Returns true if we have less than aUsecs of buffered data available.
  bool HasLowBufferedData(int64_t aUsecs);

  void UpdateNextFrameStatus(NextFrameStatus aStatus);

  // Return the current time, either the audio clock if available (if the media
  // has audio, and the playback is possible), or a clock for the video.
  // Called on the state machine thread.
  // If aTimeStamp is non-null, set *aTimeStamp to the TimeStamp corresponding
  // to the returned stream time.
  int64_t GetClock(TimeStamp* aTimeStamp = nullptr) const;

  void SetStartTime(int64_t aStartTimeUsecs);

  // Update only the state machine's current playback position (and duration,
  // if unknown).  Does not update the playback position on the decoder or
  // media element -- use UpdatePlaybackPosition for that.  Called on the state
  // machine thread, caller must hold the decoder lock.
  void UpdatePlaybackPositionInternal(int64_t aTime);

  // Update playback position and trigger next update by default time period.
  // Called on the state machine thread.
  void UpdatePlaybackPositionPeriodically();

  media::MediaSink* CreateAudioSink();

  // Always create mediasink which contains an AudioSink or StreamSink inside.
  already_AddRefed<media::MediaSink> CreateMediaSink(bool aAudioCaptured);

  // Stops the media sink and shut it down.
  // The decoder monitor must be held with exactly one lock count.
  // Called on the state machine thread.
  void StopMediaSink();

  // Create and start the media sink.
  // The decoder monitor must be held with exactly one lock count.
  // Called on the state machine thread.
  void StartMediaSink();

  // Notification method invoked when mPlayState changes.
  void PlayStateChanged();

  // Notification method invoked when mIsVisible changes.
  void VisibilityChanged();

  // Sets internal state which causes playback of media to pause.
  // The decoder monitor must be held.
  void StopPlayback();

  // If the conditions are right, sets internal state which causes playback
  // of media to begin or resume.
  // Must be called with the decode monitor held.
  void MaybeStartPlayback();

  // Moves the decoder into the shutdown state, and dispatches an error
  // event to the media element. This begins shutting down the decoder.
  // The decoder monitor must be held. This is only called on the
  // decode thread.
  void DecodeError(const MediaResult& aError);

  // Dispatches a LoadedMetadataEvent.
  // This is threadsafe and can be called on any thread.
  // The decoder monitor must be held.
  void EnqueueLoadedMetadataEvent();

  void EnqueueFirstFrameLoadedEvent();

  void DispatchAudioDecodeTaskIfNeeded();
  void DispatchVideoDecodeTaskIfNeeded();

  // Dispatch a task to decode audio if there is not.
  void EnsureAudioDecodeTaskQueued();

  // Dispatch a task to decode video if there is not.
  void EnsureVideoDecodeTaskQueued();

  // Start a task to decode audio.
  // The decoder monitor must be held.
  void RequestAudioData();

  // Start a task to decode video.
  // The decoder monitor must be held.
  void RequestVideoData();

  // Re-evaluates the state and determines whether we need to dispatch
  // events to run the decode, or if not whether we should set the reader
  // to idle mode. This is threadsafe, and can be called from any thread.
  // The decoder monitor must be held.
  void DispatchDecodeTasksIfNeeded();

  // Returns the "media time". This is the absolute time which the media
  // playback has reached. i.e. this returns values in the range
  // [mStartTime, mEndTime], and mStartTime will not be 0 if the media does
  // not start at 0. Note this is different than the "current playback position",
  // which is in the range [0,duration].
  int64_t GetMediaTime() const {
    MOZ_ASSERT(OnTaskQueue());
    return mCurrentPosition;
  }

  // Returns an upper bound on the number of microseconds of audio that is
  // decoded and playable. This is the sum of the number of usecs of audio which
  // is decoded and in the reader's audio queue, and the usecs of unplayed audio
  // which has been pushed to the audio hardware for playback. Note that after
  // calling this, the audio hardware may play some of the audio pushed to
  // hardware, so this can only be used as a upper bound. The decoder monitor
  // must be held when calling this. Called on the decode thread.
  int64_t GetDecodedAudioDuration();

  void FinishDecodeFirstFrame();

  // Queries our state to see whether the decode has finished for all streams.
  bool CheckIfDecodeComplete();

  // Performs one "cycle" of the state machine.
  void RunStateMachine();

  bool IsStateMachineScheduled() const;

  // These return true if the respective stream's decode has not yet reached
  // the end of stream.
  bool IsAudioDecoding();
  bool IsVideoDecoding();

private:
  // Resolved by the MediaSink to signal that all audio/video outstanding
  // work is complete and identify which part(a/v) of the sink is shutting down.
  void OnMediaSinkAudioComplete();
  void OnMediaSinkVideoComplete();

  // Rejected by the MediaSink to signal errors for audio/video.
  void OnMediaSinkAudioError(nsresult aResult);
  void OnMediaSinkVideoError();

  // Return true if the video decoder's decode speed can not catch up the
  // play time.
  bool NeedToSkipToNextKeyframe();

  void* const mDecoderID;
  const RefPtr<FrameStatistics> mFrameStats;
  const RefPtr<VideoFrameContainer> mVideoFrameContainer;
  const dom::AudioChannel mAudioChannel;

  // Task queue for running the state machine.
  RefPtr<TaskQueue> mTaskQueue;

  // State-watching manager.
  WatchManager<MediaDecoderStateMachine> mWatchManager;

  // True if we've dispatched a task to run the state machine but the task has
  // yet to run.
  bool mDispatchedStateMachine;

  // Used to dispatch another round schedule with specific target time.
  DelayedScheduler mDelayedScheduler;

  // Queue of audio frames. This queue is threadsafe, and is accessed from
  // the audio, decoder, state machine, and main threads.
  MediaQueue<MediaData> mAudioQueue;
  // Queue of video frames. This queue is threadsafe, and is accessed from
  // the decoder, state machine, and main threads.
  MediaQueue<MediaData> mVideoQueue;

  State mState = DECODER_STATE_DECODING_METADATA;

  UniquePtr<StateObject> mStateObj;

  media::TimeUnit Duration() const { MOZ_ASSERT(OnTaskQueue()); return mDuration.Ref().ref(); }

  // Recomputes the canonical duration from various sources.
  void RecomputeDuration();


  // FrameID which increments every time a frame is pushed to our queue.
  FrameID mCurrentFrameID;

  // The highest timestamp that our position has reached. Monotonically
  // increasing.
  Watchable<media::TimeUnit> mObservedDuration;

  // Returns true if we're logically playing, that is, if the Play() has
  // been called and Pause() has not or we have not yet reached the end
  // of media. This is irrespective of the seeking state; if the owner
  // calls Play() and then Seek(), we still count as logically playing.
  // The decoder monitor must be held.
  bool IsLogicallyPlaying()
  {
    MOZ_ASSERT(OnTaskQueue());
    return mPlayState == MediaDecoder::PLAY_STATE_PLAYING ||
           mNextPlayState == MediaDecoder::PLAY_STATE_PLAYING;
  }

  // Media Fragment end time in microseconds. Access controlled by decoder monitor.
  int64_t mFragmentEndTime;

  // The media sink resource.  Used on the state machine thread.
  RefPtr<media::MediaSink> mMediaSink;

  const RefPtr<MediaDecoderReaderWrapper> mReader;

  // The end time of the last audio frame that's been pushed onto the media sink
  // in microseconds. This will approximately be the end time
  // of the audio stream, unless another frame is pushed to the hardware.
  int64_t AudioEndTime() const;

  // The end time of the last rendered video frame that's been sent to
  // compositor.
  int64_t VideoEndTime() const;

  // The end time of the last decoded audio frame. This signifies the end of
  // decoded audio data. Used to check if we are low in decoded data.
  int64_t mDecodedAudioEndTime;

  // The end time of the last decoded video frame. Used to check if we are low
  // on decoded video data.
  int64_t mDecodedVideoEndTime;

  // Playback rate. 1.0 : normal speed, 0.5 : two times slower.
  double mPlaybackRate;

  // If we've got more than this number of decoded video frames waiting in
  // the video queue, we will not decode any more video frames until some have
  // been consumed by the play state machine thread.
  // Must hold monitor.
  uint32_t GetAmpleVideoFrames() const;

  // Low audio threshold. If we've decoded less than this much audio we
  // consider our audio decode "behind", and we may skip video decoding
  // in order to allow our audio decoding to catch up. We favour audio
  // decoding over video. We increase this threshold if we're slow to
  // decode video frames, in order to reduce the chance of audio underruns.
  // Note that we don't ever reset this threshold, it only ever grows as
  // we detect that the decode can't keep up with rendering.
  int64_t mLowAudioThresholdUsecs;

  // Our "ample" audio threshold. Once we've this much audio decoded, we
  // pause decoding. If we increase mLowAudioThresholdUsecs, we'll also
  // increase this too appropriately (we don't want mLowAudioThresholdUsecs
  // to be greater than ampleAudioThreshold, else we'd stop decoding!).
  // Note that we don't ever reset this threshold, it only ever grows as
  // we detect that the decode can't keep up with rendering.
  int64_t mAmpleAudioThresholdUsecs;

  // At the start of decoding we want to "preroll" the decode until we've
  // got a few frames decoded before we consider whether decode is falling
  // behind. Otherwise our "we're falling behind" logic will trigger
  // unnecessarily if we start playing as soon as the first sample is
  // decoded. These two fields store how many video frames and audio
  // samples we must consume before are considered to be finished prerolling.
  uint32_t AudioPrerollUsecs() const
  {
    MOZ_ASSERT(OnTaskQueue());
    return mAmpleAudioThresholdUsecs / 2;
  }

  uint32_t VideoPrerollFrames() const
  {
    MOZ_ASSERT(OnTaskQueue());
    return GetAmpleVideoFrames() / 2;
  }

  // Only one of a given pair of ({Audio,Video}DataPromise, WaitForDataPromise)
  // should exist at any given moment.

  MediaEventListener mAudioCallback;
  MediaEventListener mVideoCallback;
  MediaEventListener mAudioWaitCallback;
  MediaEventListener mVideoWaitCallback;

  const char* AudioRequestStatus() const;
  const char* VideoRequestStatus() const;

  void OnSuspendTimerResolved();
  void OnSuspendTimerRejected();

  // True if we shouldn't play our audio (but still write it to any capturing
  // streams). When this is true, the audio thread will never start again after
  // it has stopped.
  bool mAudioCaptured;

  // True if all audio frames are already rendered.
  bool mAudioCompleted = false;

  // True if all video frames are already rendered.
  bool mVideoCompleted = false;

  // Flag whether we notify metadata before decoding the first frame or after.
  //
  // Note that the odd semantics here are designed to replicate the current
  // behavior where we notify the decoder each time we come out of dormant, but
  // send suppressed event visibility for those cases. This code can probably be
  // simplified.
  bool mNotifyMetadataBeforeFirstFrame;

  // True if we should not decode/preroll unnecessary samples, unless we're
  // played. "Prerolling" in this context refers to when we decode and
  // buffer decoded samples in advance of when they're needed for playback.
  // This flag is set for preload=metadata media, and means we won't
  // decode more than the first video frame and first block of audio samples
  // for that media when we startup, or after a seek. When Play() is called,
  // we reset this flag, as we assume the user is playing the media, so
  // prerolling is appropriate then. This flag is used to reduce the overhead
  // of prerolling samples for media elements that may not play, both
  // memory and CPU overhead.
  bool mMinimizePreroll;

  // Stores presentation info required for playback.
  Maybe<MediaInfo> mInfo;

  nsAutoPtr<MetadataTags> mMetadataTags;

  mozilla::MediaMetadataManager mMetadataManager;

  // Track our request to update the buffered ranges
  MozPromiseRequestHolder<MediaDecoderReader::BufferedUpdatePromise> mBufferedUpdateRequest;

  // True if we are back from DECODER_STATE_DORMANT state and
  // LoadedMetadataEvent was already sent.
  bool mSentLoadedMetadataEvent;

  // True if we've decoded first frames (thus having the start time) and
  // notified the FirstFrameLoaded event. Note we can't initiate seek until the
  // start time is known which happens when the first frames are decoded or we
  // are playing an MSE stream (the start time is always assumed 0).
  bool mSentFirstFrameLoadedEvent;

  // True if video decoding is suspended.
  bool mVideoDecodeSuspended;

  // True if the media is seekable (i.e. supports random access).
  bool mMediaSeekable = true;

  // True if the media is seekable only in buffered ranges.
  bool mMediaSeekableOnlyInBufferedRanges = false;

  // Track enabling video decode suspension via timer
  DelayedScheduler mVideoDecodeSuspendTimer;

  // Data about MediaStreams that are being fed by the decoder.
  const RefPtr<OutputStreamManager> mOutputStreamManager;

  // Media data resource from the decoder.
  RefPtr<MediaResource> mResource;

  // Track the complete & error for audio/video separately
  MozPromiseRequestHolder<GenericPromise> mMediaSinkAudioPromise;
  MozPromiseRequestHolder<GenericPromise> mMediaSinkVideoPromise;

  MediaEventListener mAudioQueueListener;
  MediaEventListener mVideoQueueListener;
  MediaEventListener mAudibleListener;
  MediaEventListener mOnMediaNotSeekable;

  MediaEventProducerExc<nsAutoPtr<MediaInfo>,
                        nsAutoPtr<MetadataTags>,
                        MediaDecoderEventVisibility> mMetadataLoadedEvent;
  MediaEventProducerExc<nsAutoPtr<MediaInfo>,
                        MediaDecoderEventVisibility> mFirstFrameLoadedEvent;

  MediaEventProducer<MediaEventType> mOnPlaybackEvent;
  MediaEventProducer<MediaResult> mOnPlaybackErrorEvent;

  MediaEventProducer<DecoderDoctorEvent> mOnDecoderDoctorEvent;

  // True if audio is offloading.
  // Playback will not start when audio is offloading.
  bool mAudioOffloading;

#ifdef MOZ_EME
  void OnCDMProxyReady(RefPtr<CDMProxy> aProxy);
  void OnCDMProxyNotReady();
  RefPtr<CDMProxy> mCDMProxy;
  MozPromiseRequestHolder<MediaDecoder::CDMProxyPromise> mCDMProxyPromise;
#endif

private:
  // The buffered range. Mirrored from the decoder thread.
  Mirror<media::TimeIntervals> mBuffered;

  // The duration according to the demuxer's current estimate, mirrored from the main thread.
  Mirror<media::NullableTimeUnit> mEstimatedDuration;

  // The duration explicitly set by JS, mirrored from the main thread.
  Mirror<Maybe<double>> mExplicitDuration;

  // The current play state and next play state, mirrored from the main thread.
  Mirror<MediaDecoder::PlayState> mPlayState;
  Mirror<MediaDecoder::PlayState> mNextPlayState;

  // Volume of playback. 0.0 = muted. 1.0 = full volume.
  Mirror<double> mVolume;

  // Pitch preservation for the playback rate.
  Mirror<bool> mPreservesPitch;

  // True if the media is same-origin with the element. Data can only be
  // passed to MediaStreams when this is true.
  Mirror<bool> mSameOriginMedia;

  // An identifier for the principal of the media. Used to track when
  // main-thread induced principal changes get reflected on MSG thread.
  Mirror<PrincipalHandle> mMediaPrincipalHandle;

  // Estimate of the current playback rate (bytes/second).
  Mirror<double> mPlaybackBytesPerSecond;

  // True if mPlaybackBytesPerSecond is a reliable estimate.
  Mirror<bool> mPlaybackRateReliable;

  // Current decoding position in the stream.
  Mirror<int64_t> mDecoderPosition;

  // IsVisible, mirrored from the media decoder.
  Mirror<bool> mIsVisible;

  // Duration of the media. This is guaranteed to be non-null after we finish
  // decoding the first frame.
  Canonical<media::NullableTimeUnit> mDuration;

  // Whether we're currently in or transitioning to shutdown state.
  Canonical<bool> mIsShutdown;

  // The status of our next frame. Mirrored on the main thread and used to
  // compute ready state.
  Canonical<NextFrameStatus> mNextFrameStatus;

  // The time of the current frame in microseconds, corresponding to the "current
  // playback position" in HTML5. This is referenced from 0, which is the initial
  // playback position.
  Canonical<int64_t> mCurrentPosition;

  // Current playback position in the stream in bytes.
  Canonical<int64_t> mPlaybackOffset;

  // Used to distinguish whether the audio is producing sound.
  Canonical<bool> mIsAudioDataAudible;

public:
  AbstractCanonical<media::TimeIntervals>* CanonicalBuffered() const;

  AbstractCanonical<media::NullableTimeUnit>* CanonicalDuration() {
    return &mDuration;
  }
  AbstractCanonical<bool>* CanonicalIsShutdown() {
    return &mIsShutdown;
  }
  AbstractCanonical<NextFrameStatus>* CanonicalNextFrameStatus() {
    return &mNextFrameStatus;
  }
  AbstractCanonical<int64_t>* CanonicalCurrentPosition() {
    return &mCurrentPosition;
  }
  AbstractCanonical<int64_t>* CanonicalPlaybackOffset() {
    return &mPlaybackOffset;
  }
  AbstractCanonical<bool>* CanonicalIsAudioDataAudible() {
    return &mIsAudioDataAudible;
  }
};

} // namespace mozilla

#endif