diff options
Diffstat (limited to 'mfbt/Atomics.h')
| -rw-r--r-- | mfbt/Atomics.h | 800 |
1 files changed, 800 insertions, 0 deletions
diff --git a/mfbt/Atomics.h b/mfbt/Atomics.h new file mode 100644 index 0000000000..213d1b9f07 --- /dev/null +++ b/mfbt/Atomics.h @@ -0,0 +1,800 @@ +/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* vim: set ts=8 sts=2 et sw=2 tw=80: */ +/* This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ + +/* + * Implements (almost always) lock-free atomic operations. The operations here + * are a subset of that which can be found in C++11's <atomic> header, with a + * different API to enforce consistent memory ordering constraints. + * + * Anyone caught using |volatile| for inter-thread memory safety needs to be + * sent a copy of this header and the C++11 standard. + */ + +#ifndef mozilla_Atomics_h +#define mozilla_Atomics_h + +#include "mozilla/Assertions.h" +#include "mozilla/Attributes.h" +#include "mozilla/Compiler.h" +#include "mozilla/TypeTraits.h" + +#include <stdint.h> + +/* + * Our minimum deployment target on clang/OS X is OS X 10.6, whose SDK + * does not have <atomic>. So be sure to check for <atomic> support + * along with C++0x support. + */ +#if defined(_MSC_VER) +# define MOZ_HAVE_CXX11_ATOMICS +#elif defined(__clang__) || defined(__GNUC__) + /* + * Clang doesn't like <atomic> from libstdc++ before 4.7 due to the + * loose typing of the atomic builtins. GCC 4.5 and 4.6 lacks inline + * definitions for unspecialized std::atomic and causes linking errors. + * Therefore, we require at least 4.7.0 for using libstdc++. + * + * libc++ <atomic> is only functional with clang. + */ +# if MOZ_USING_LIBSTDCXX && MOZ_LIBSTDCXX_VERSION_AT_LEAST(4, 7, 0) +# define MOZ_HAVE_CXX11_ATOMICS +# elif MOZ_USING_LIBCXX && defined(__clang__) +# define MOZ_HAVE_CXX11_ATOMICS +# endif +#endif + +namespace mozilla { + +/** + * An enum of memory ordering possibilities for atomics. + * + * Memory ordering is the observable state of distinct values in memory. + * (It's a separate concept from atomicity, which concerns whether an + * operation can ever be observed in an intermediate state. Don't + * conflate the two!) Given a sequence of operations in source code on + * memory, it is *not* always the case that, at all times and on all + * cores, those operations will appear to have occurred in that exact + * sequence. First, the compiler might reorder that sequence, if it + * thinks another ordering will be more efficient. Second, the CPU may + * not expose so consistent a view of memory. CPUs will often perform + * their own instruction reordering, above and beyond that performed by + * the compiler. And each core has its own memory caches, and accesses + * (reads and writes both) to "memory" may only resolve to out-of-date + * cache entries -- not to the "most recently" performed operation in + * some global sense. Any access to a value that may be used by + * multiple threads, potentially across multiple cores, must therefore + * have a memory ordering imposed on it, for all code on all + * threads/cores to have a sufficiently coherent worldview. + * + * http://gcc.gnu.org/wiki/Atomic/GCCMM/AtomicSync and + * http://en.cppreference.com/w/cpp/atomic/memory_order go into more + * detail on all this, including examples of how each mode works. + * + * Note that for simplicity and practicality, not all of the modes in + * C++11 are supported. The missing C++11 modes are either subsumed by + * the modes we provide below, or not relevant for the CPUs we support + * in Gecko. These three modes are confusing enough as it is! + */ +enum MemoryOrdering { + /* + * Relaxed ordering is the simplest memory ordering: none at all. + * When the result of a write is observed, nothing may be inferred + * about other memory. Writes ostensibly performed "before" on the + * writing thread may not yet be visible. Writes performed "after" on + * the writing thread may already be visible, if the compiler or CPU + * reordered them. (The latter can happen if reads and/or writes get + * held up in per-processor caches.) Relaxed ordering means + * operations can always use cached values (as long as the actual + * updates to atomic values actually occur, correctly, eventually), so + * it's usually the fastest sort of atomic access. For this reason, + * *it's also the most dangerous kind of access*. + * + * Relaxed ordering is good for things like process-wide statistics + * counters that don't need to be consistent with anything else, so + * long as updates themselves are atomic. (And so long as any + * observations of that value can tolerate being out-of-date -- if you + * need some sort of up-to-date value, you need some sort of other + * synchronizing operation.) It's *not* good for locks, mutexes, + * reference counts, etc. that mediate access to other memory, or must + * be observably consistent with other memory. + * + * x86 architectures don't take advantage of the optimization + * opportunities that relaxed ordering permits. Thus it's possible + * that using relaxed ordering will "work" on x86 but fail elsewhere + * (ARM, say, which *does* implement non-sequentially-consistent + * relaxed ordering semantics). Be extra-careful using relaxed + * ordering if you can't easily test non-x86 architectures! + */ + Relaxed, + + /* + * When an atomic value is updated with ReleaseAcquire ordering, and + * that new value is observed with ReleaseAcquire ordering, prior + * writes (atomic or not) are also observable. What ReleaseAcquire + * *doesn't* give you is any observable ordering guarantees for + * ReleaseAcquire-ordered operations on different objects. For + * example, if there are two cores that each perform ReleaseAcquire + * operations on separate objects, each core may or may not observe + * the operations made by the other core. The only way the cores can + * be synchronized with ReleaseAcquire is if they both + * ReleaseAcquire-access the same object. This implies that you can't + * necessarily describe some global total ordering of ReleaseAcquire + * operations. + * + * ReleaseAcquire ordering is good for (as the name implies) atomic + * operations on values controlling ownership of things: reference + * counts, mutexes, and the like. However, if you are thinking about + * using these to implement your own locks or mutexes, you should take + * a good, hard look at actual lock or mutex primitives first. + */ + ReleaseAcquire, + + /* + * When an atomic value is updated with SequentiallyConsistent + * ordering, all writes observable when the update is observed, just + * as with ReleaseAcquire ordering. But, furthermore, a global total + * ordering of SequentiallyConsistent operations *can* be described. + * For example, if two cores perform SequentiallyConsistent operations + * on separate objects, one core will observably perform its update + * (and all previous operations will have completed), then the other + * core will observably perform its update (and all previous + * operations will have completed). (Although those previous + * operations aren't themselves ordered -- they could be intermixed, + * or ordered if they occur on atomic values with ordering + * requirements.) SequentiallyConsistent is the *simplest and safest* + * ordering of atomic operations -- it's always as if one operation + * happens, then another, then another, in some order -- and every + * core observes updates to happen in that single order. Because it + * has the most synchronization requirements, operations ordered this + * way also tend to be slowest. + * + * SequentiallyConsistent ordering can be desirable when multiple + * threads observe objects, and they all have to agree on the + * observable order of changes to them. People expect + * SequentiallyConsistent ordering, even if they shouldn't, when + * writing code, atomic or otherwise. SequentiallyConsistent is also + * the ordering of choice when designing lockless data structures. If + * you don't know what order to use, use this one. + */ + SequentiallyConsistent, +}; + +} // namespace mozilla + +// Build up the underlying intrinsics. +#ifdef MOZ_HAVE_CXX11_ATOMICS + +# include <atomic> + +namespace mozilla { +namespace detail { + +/* + * We provide CompareExchangeFailureOrder to work around a bug in some + * versions of GCC's <atomic> header. See bug 898491. + */ +template<MemoryOrdering Order> struct AtomicOrderConstraints; + +template<> +struct AtomicOrderConstraints<Relaxed> +{ + static const std::memory_order AtomicRMWOrder = std::memory_order_relaxed; + static const std::memory_order LoadOrder = std::memory_order_relaxed; + static const std::memory_order StoreOrder = std::memory_order_relaxed; + static const std::memory_order CompareExchangeFailureOrder = + std::memory_order_relaxed; +}; + +template<> +struct AtomicOrderConstraints<ReleaseAcquire> +{ + static const std::memory_order AtomicRMWOrder = std::memory_order_acq_rel; + static const std::memory_order LoadOrder = std::memory_order_acquire; + static const std::memory_order StoreOrder = std::memory_order_release; + static const std::memory_order CompareExchangeFailureOrder = + std::memory_order_acquire; +}; + +template<> +struct AtomicOrderConstraints<SequentiallyConsistent> +{ + static const std::memory_order AtomicRMWOrder = std::memory_order_seq_cst; + static const std::memory_order LoadOrder = std::memory_order_seq_cst; + static const std::memory_order StoreOrder = std::memory_order_seq_cst; + static const std::memory_order CompareExchangeFailureOrder = + std::memory_order_seq_cst; +}; + +template<typename T, MemoryOrdering Order> +struct IntrinsicBase +{ + typedef std::atomic<T> ValueType; + typedef AtomicOrderConstraints<Order> OrderedOp; +}; + +template<typename T, MemoryOrdering Order> +struct IntrinsicMemoryOps : public IntrinsicBase<T, Order> +{ + typedef IntrinsicBase<T, Order> Base; + + static T load(const typename Base::ValueType& aPtr) + { + return aPtr.load(Base::OrderedOp::LoadOrder); + } + + static void store(typename Base::ValueType& aPtr, T aVal) + { + aPtr.store(aVal, Base::OrderedOp::StoreOrder); + } + + static T exchange(typename Base::ValueType& aPtr, T aVal) + { + return aPtr.exchange(aVal, Base::OrderedOp::AtomicRMWOrder); + } + + static bool compareExchange(typename Base::ValueType& aPtr, + T aOldVal, T aNewVal) + { + return aPtr.compare_exchange_strong(aOldVal, aNewVal, + Base::OrderedOp::AtomicRMWOrder, + Base::OrderedOp::CompareExchangeFailureOrder); + } +}; + +template<typename T, MemoryOrdering Order> +struct IntrinsicAddSub : public IntrinsicBase<T, Order> +{ + typedef IntrinsicBase<T, Order> Base; + + static T add(typename Base::ValueType& aPtr, T aVal) + { + return aPtr.fetch_add(aVal, Base::OrderedOp::AtomicRMWOrder); + } + + static T sub(typename Base::ValueType& aPtr, T aVal) + { + return aPtr.fetch_sub(aVal, Base::OrderedOp::AtomicRMWOrder); + } +}; + +template<typename T, MemoryOrdering Order> +struct IntrinsicAddSub<T*, Order> : public IntrinsicBase<T*, Order> +{ + typedef IntrinsicBase<T*, Order> Base; + + static T* add(typename Base::ValueType& aPtr, ptrdiff_t aVal) + { + return aPtr.fetch_add(aVal, Base::OrderedOp::AtomicRMWOrder); + } + + static T* sub(typename Base::ValueType& aPtr, ptrdiff_t aVal) + { + return aPtr.fetch_sub(aVal, Base::OrderedOp::AtomicRMWOrder); + } +}; + +template<typename T, MemoryOrdering Order> +struct IntrinsicIncDec : public IntrinsicAddSub<T, Order> +{ + typedef IntrinsicBase<T, Order> Base; + + static T inc(typename Base::ValueType& aPtr) + { + return IntrinsicAddSub<T, Order>::add(aPtr, 1); + } + + static T dec(typename Base::ValueType& aPtr) + { + return IntrinsicAddSub<T, Order>::sub(aPtr, 1); + } +}; + +template<typename T, MemoryOrdering Order> +struct AtomicIntrinsics : public IntrinsicMemoryOps<T, Order>, + public IntrinsicIncDec<T, Order> +{ + typedef IntrinsicBase<T, Order> Base; + + static T or_(typename Base::ValueType& aPtr, T aVal) + { + return aPtr.fetch_or(aVal, Base::OrderedOp::AtomicRMWOrder); + } + + static T xor_(typename Base::ValueType& aPtr, T aVal) + { + return aPtr.fetch_xor(aVal, Base::OrderedOp::AtomicRMWOrder); + } + + static T and_(typename Base::ValueType& aPtr, T aVal) + { + return aPtr.fetch_and(aVal, Base::OrderedOp::AtomicRMWOrder); + } +}; + +template<typename T, MemoryOrdering Order> +struct AtomicIntrinsics<T*, Order> + : public IntrinsicMemoryOps<T*, Order>, public IntrinsicIncDec<T*, Order> +{ +}; + +template<typename T> +struct ToStorageTypeArgument +{ + static constexpr T convert (T aT) { return aT; } +}; + +} // namespace detail +} // namespace mozilla + +#elif defined(__GNUC__) + +namespace mozilla { +namespace detail { + +/* + * The __sync_* family of intrinsics is documented here: + * + * http://gcc.gnu.org/onlinedocs/gcc-4.6.4/gcc/Atomic-Builtins.html + * + * While these intrinsics are deprecated in favor of the newer __atomic_* + * family of intrincs: + * + * http://gcc.gnu.org/onlinedocs/gcc-4.7.3/gcc/_005f_005fatomic-Builtins.html + * + * any GCC version that supports the __atomic_* intrinsics will also support + * the <atomic> header and so will be handled above. We provide a version of + * atomics using the __sync_* intrinsics to support older versions of GCC. + * + * All __sync_* intrinsics that we use below act as full memory barriers, for + * both compiler and hardware reordering, except for __sync_lock_test_and_set, + * which is a only an acquire barrier. When we call __sync_lock_test_and_set, + * we add a barrier above it as appropriate. + */ + +template<MemoryOrdering Order> struct Barrier; + +/* + * Some processors (in particular, x86) don't require quite so many calls to + * __sync_sychronize as our specializations of Barrier produce. If + * performance turns out to be an issue, defining these specializations + * on a per-processor basis would be a good first tuning step. + */ + +template<> +struct Barrier<Relaxed> +{ + static void beforeLoad() {} + static void afterLoad() {} + static void beforeStore() {} + static void afterStore() {} +}; + +template<> +struct Barrier<ReleaseAcquire> +{ + static void beforeLoad() {} + static void afterLoad() { __sync_synchronize(); } + static void beforeStore() { __sync_synchronize(); } + static void afterStore() {} +}; + +template<> +struct Barrier<SequentiallyConsistent> +{ + static void beforeLoad() { __sync_synchronize(); } + static void afterLoad() { __sync_synchronize(); } + static void beforeStore() { __sync_synchronize(); } + static void afterStore() { __sync_synchronize(); } +}; + +template<typename T, bool TIsEnum = IsEnum<T>::value> +struct AtomicStorageType +{ + // For non-enums, just use the type directly. + typedef T Type; +}; + +template<typename T> +struct AtomicStorageType<T, true> + : Conditional<sizeof(T) == 4, uint32_t, uint64_t> +{ + static_assert(sizeof(T) == 4 || sizeof(T) == 8, + "wrong type computed in conditional above"); +}; + +template<typename T, MemoryOrdering Order> +struct IntrinsicMemoryOps +{ + typedef typename AtomicStorageType<T>::Type ValueType; + + static T load(const ValueType& aPtr) + { + Barrier<Order>::beforeLoad(); + T val = T(aPtr); + Barrier<Order>::afterLoad(); + return val; + } + + static void store(ValueType& aPtr, T aVal) + { + Barrier<Order>::beforeStore(); + aPtr = ValueType(aVal); + Barrier<Order>::afterStore(); + } + + static T exchange(ValueType& aPtr, T aVal) + { + // __sync_lock_test_and_set is only an acquire barrier; loads and stores + // can't be moved up from after to before it, but they can be moved down + // from before to after it. We may want a stricter ordering, so we need + // an explicit barrier. + Barrier<Order>::beforeStore(); + return T(__sync_lock_test_and_set(&aPtr, ValueType(aVal))); + } + + static bool compareExchange(ValueType& aPtr, T aOldVal, T aNewVal) + { + return __sync_bool_compare_and_swap(&aPtr, ValueType(aOldVal), ValueType(aNewVal)); + } +}; + +template<typename T, MemoryOrdering Order> +struct IntrinsicAddSub + : public IntrinsicMemoryOps<T, Order> +{ + typedef IntrinsicMemoryOps<T, Order> Base; + typedef typename Base::ValueType ValueType; + + static T add(ValueType& aPtr, T aVal) + { + return T(__sync_fetch_and_add(&aPtr, ValueType(aVal))); + } + + static T sub(ValueType& aPtr, T aVal) + { + return T(__sync_fetch_and_sub(&aPtr, ValueType(aVal))); + } +}; + +template<typename T, MemoryOrdering Order> +struct IntrinsicAddSub<T*, Order> + : public IntrinsicMemoryOps<T*, Order> +{ + typedef IntrinsicMemoryOps<T*, Order> Base; + typedef typename Base::ValueType ValueType; + + /* + * The reinterpret_casts are needed so that + * __sync_fetch_and_{add,sub} will properly type-check. + * + * Also, these functions do not provide standard semantics for + * pointer types, so we need to adjust the addend. + */ + static ValueType add(ValueType& aPtr, ptrdiff_t aVal) + { + ValueType amount = reinterpret_cast<ValueType>(aVal * sizeof(T)); + return __sync_fetch_and_add(&aPtr, amount); + } + + static ValueType sub(ValueType& aPtr, ptrdiff_t aVal) + { + ValueType amount = reinterpret_cast<ValueType>(aVal * sizeof(T)); + return __sync_fetch_and_sub(&aPtr, amount); + } +}; + +template<typename T, MemoryOrdering Order> +struct IntrinsicIncDec : public IntrinsicAddSub<T, Order> +{ + typedef IntrinsicAddSub<T, Order> Base; + typedef typename Base::ValueType ValueType; + + static T inc(ValueType& aPtr) { return Base::add(aPtr, 1); } + static T dec(ValueType& aPtr) { return Base::sub(aPtr, 1); } +}; + +template<typename T, MemoryOrdering Order> +struct AtomicIntrinsics : public IntrinsicIncDec<T, Order> +{ + static T or_( T& aPtr, T aVal) { return __sync_fetch_and_or(&aPtr, aVal); } + static T xor_(T& aPtr, T aVal) { return __sync_fetch_and_xor(&aPtr, aVal); } + static T and_(T& aPtr, T aVal) { return __sync_fetch_and_and(&aPtr, aVal); } +}; + +template<typename T, MemoryOrdering Order> +struct AtomicIntrinsics<T*, Order> : public IntrinsicIncDec<T*, Order> +{ +}; + +template<typename T, bool TIsEnum = IsEnum<T>::value> +struct ToStorageTypeArgument +{ + typedef typename AtomicStorageType<T>::Type ResultType; + + static constexpr ResultType convert (T aT) { return ResultType(aT); } +}; + +template<typename T> +struct ToStorageTypeArgument<T, false> +{ + static constexpr T convert (T aT) { return aT; } +}; + +} // namespace detail +} // namespace mozilla + +#else +# error "Atomic compiler intrinsics are not supported on your platform" +#endif + +namespace mozilla { + +namespace detail { + +template<typename T, MemoryOrdering Order> +class AtomicBase +{ + static_assert(sizeof(T) == 4 || sizeof(T) == 8, + "mozilla/Atomics.h only supports 32-bit and 64-bit types"); + +protected: + typedef typename detail::AtomicIntrinsics<T, Order> Intrinsics; + typedef typename Intrinsics::ValueType ValueType; + ValueType mValue; + +public: + constexpr AtomicBase() : mValue() {} + explicit constexpr AtomicBase(T aInit) + : mValue(ToStorageTypeArgument<T>::convert(aInit)) + {} + + // Note: we can't provide operator T() here because Atomic<bool> inherits + // from AtomcBase with T=uint32_t and not T=bool. If we implemented + // operator T() here, it would cause errors when comparing Atomic<bool> with + // a regular bool. + + T operator=(T aVal) + { + Intrinsics::store(mValue, aVal); + return aVal; + } + + /** + * Performs an atomic swap operation. aVal is stored and the previous + * value of this variable is returned. + */ + T exchange(T aVal) + { + return Intrinsics::exchange(mValue, aVal); + } + + /** + * Performs an atomic compare-and-swap operation and returns true if it + * succeeded. This is equivalent to atomically doing + * + * if (mValue == aOldValue) { + * mValue = aNewValue; + * return true; + * } else { + * return false; + * } + */ + bool compareExchange(T aOldValue, T aNewValue) + { + return Intrinsics::compareExchange(mValue, aOldValue, aNewValue); + } + +private: + template<MemoryOrdering AnyOrder> + AtomicBase(const AtomicBase<T, AnyOrder>& aCopy) = delete; +}; + +template<typename T, MemoryOrdering Order> +class AtomicBaseIncDec : public AtomicBase<T, Order> +{ + typedef typename detail::AtomicBase<T, Order> Base; + +public: + constexpr AtomicBaseIncDec() : Base() {} + explicit constexpr AtomicBaseIncDec(T aInit) : Base(aInit) {} + + using Base::operator=; + + operator T() const { return Base::Intrinsics::load(Base::mValue); } + T operator++(int) { return Base::Intrinsics::inc(Base::mValue); } + T operator--(int) { return Base::Intrinsics::dec(Base::mValue); } + T operator++() { return Base::Intrinsics::inc(Base::mValue) + 1; } + T operator--() { return Base::Intrinsics::dec(Base::mValue) - 1; } + +private: + template<MemoryOrdering AnyOrder> + AtomicBaseIncDec(const AtomicBaseIncDec<T, AnyOrder>& aCopy) = delete; +}; + +} // namespace detail + +/** + * A wrapper for a type that enforces that all memory accesses are atomic. + * + * In general, where a variable |T foo| exists, |Atomic<T> foo| can be used in + * its place. Implementations for integral and pointer types are provided + * below. + * + * Atomic accesses are sequentially consistent by default. You should + * use the default unless you are tall enough to ride the + * memory-ordering roller coaster (if you're not sure, you aren't) and + * you have a compelling reason to do otherwise. + * + * There is one exception to the case of atomic memory accesses: providing an + * initial value of the atomic value is not guaranteed to be atomic. This is a + * deliberate design choice that enables static atomic variables to be declared + * without introducing extra static constructors. + */ +template<typename T, + MemoryOrdering Order = SequentiallyConsistent, + typename Enable = void> +class Atomic; + +/** + * Atomic<T> implementation for integral types. + * + * In addition to atomic store and load operations, compound assignment and + * increment/decrement operators are implemented which perform the + * corresponding read-modify-write operation atomically. Finally, an atomic + * swap method is provided. + */ +template<typename T, MemoryOrdering Order> +class Atomic<T, Order, typename EnableIf<IsIntegral<T>::value && + !IsSame<T, bool>::value>::Type> + : public detail::AtomicBaseIncDec<T, Order> +{ + typedef typename detail::AtomicBaseIncDec<T, Order> Base; + +public: + constexpr Atomic() : Base() {} + explicit constexpr Atomic(T aInit) : Base(aInit) {} + + using Base::operator=; + + T operator+=(T aDelta) + { + return Base::Intrinsics::add(Base::mValue, aDelta) + aDelta; + } + + T operator-=(T aDelta) + { + return Base::Intrinsics::sub(Base::mValue, aDelta) - aDelta; + } + + T operator|=(T aVal) + { + return Base::Intrinsics::or_(Base::mValue, aVal) | aVal; + } + + T operator^=(T aVal) + { + return Base::Intrinsics::xor_(Base::mValue, aVal) ^ aVal; + } + + T operator&=(T aVal) + { + return Base::Intrinsics::and_(Base::mValue, aVal) & aVal; + } + +private: + Atomic(Atomic<T, Order>& aOther) = delete; +}; + +/** + * Atomic<T> implementation for pointer types. + * + * An atomic compare-and-swap primitive for pointer variables is provided, as + * are atomic increment and decement operators. Also provided are the compound + * assignment operators for addition and subtraction. Atomic swap (via + * exchange()) is included as well. + */ +template<typename T, MemoryOrdering Order> +class Atomic<T*, Order> : public detail::AtomicBaseIncDec<T*, Order> +{ + typedef typename detail::AtomicBaseIncDec<T*, Order> Base; + +public: + constexpr Atomic() : Base() {} + explicit constexpr Atomic(T* aInit) : Base(aInit) {} + + using Base::operator=; + + T* operator+=(ptrdiff_t aDelta) + { + return Base::Intrinsics::add(Base::mValue, aDelta) + aDelta; + } + + T* operator-=(ptrdiff_t aDelta) + { + return Base::Intrinsics::sub(Base::mValue, aDelta) - aDelta; + } + +private: + Atomic(Atomic<T*, Order>& aOther) = delete; +}; + +/** + * Atomic<T> implementation for enum types. + * + * The atomic store and load operations and the atomic swap method is provided. + */ +template<typename T, MemoryOrdering Order> +class Atomic<T, Order, typename EnableIf<IsEnum<T>::value>::Type> + : public detail::AtomicBase<T, Order> +{ + typedef typename detail::AtomicBase<T, Order> Base; + +public: + constexpr Atomic() : Base() {} + explicit constexpr Atomic(T aInit) : Base(aInit) {} + + operator T() const { return T(Base::Intrinsics::load(Base::mValue)); } + + using Base::operator=; + +private: + Atomic(Atomic<T, Order>& aOther) = delete; +}; + +/** + * Atomic<T> implementation for boolean types. + * + * The atomic store and load operations and the atomic swap method is provided. + * + * Note: + * + * - sizeof(Atomic<bool>) != sizeof(bool) for some implementations of + * bool and/or some implementations of std::atomic. This is allowed in + * [atomic.types.generic]p9. + * + * - It's not obvious whether the 8-bit atomic functions on Windows are always + * inlined or not. If they are not inlined, the corresponding functions in the + * runtime library are not available on Windows XP. This is why we implement + * Atomic<bool> with an underlying type of uint32_t. + */ +template<MemoryOrdering Order> +class Atomic<bool, Order> + : protected detail::AtomicBase<uint32_t, Order> +{ + typedef typename detail::AtomicBase<uint32_t, Order> Base; + +public: + constexpr Atomic() : Base() {} + explicit constexpr Atomic(bool aInit) : Base(aInit) {} + + // We provide boolean wrappers for the underlying AtomicBase methods. + MOZ_IMPLICIT operator bool() const + { + return Base::Intrinsics::load(Base::mValue); + } + + bool operator=(bool aVal) + { + return Base::operator=(aVal); + } + + bool exchange(bool aVal) + { + return Base::exchange(aVal); + } + + bool compareExchange(bool aOldValue, bool aNewValue) + { + return Base::compareExchange(aOldValue, aNewValue); + } + +private: + Atomic(Atomic<bool, Order>& aOther) = delete; +}; + +} // namespace mozilla + +#endif /* mozilla_Atomics_h */ |