summaryrefslogtreecommitdiff
path: root/ldap/c-sdk/libldap/saslio.c
diff options
context:
space:
mode:
Diffstat (limited to 'ldap/c-sdk/libldap/saslio.c')
-rw-r--r--ldap/c-sdk/libldap/saslio.c635
1 files changed, 635 insertions, 0 deletions
diff --git a/ldap/c-sdk/libldap/saslio.c b/ldap/c-sdk/libldap/saslio.c
new file mode 100644
index 0000000000..6ab6303d0c
--- /dev/null
+++ b/ldap/c-sdk/libldap/saslio.c
@@ -0,0 +1,635 @@
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is Sun LDAP C SDK.
+ *
+ * The Initial Developer of the Original Code is Sun Microsystems, Inc.
+ *
+ * Portions created by Sun Microsystems, Inc are Copyright (C) 2005
+ * Sun Microsystems, Inc. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+#ifdef LDAP_SASLIO_HOOKS
+#include <assert.h>
+#include "ldap-int.h"
+#include "../liblber/lber-int.h"
+#include <sasl.h>
+/* Should be pulled in from lber-int.h */
+#define READBUFSIZ 8192
+
+#define SEARCH_TIMEOUT_SECS 120
+#define NSLDAPI_SM_BUF 128
+
+/*
+ * Data structures:
+ */
+
+/* data structure that populates the I/O callback socket-specific arg. */
+typedef struct lextiof_socket_private {
+ struct ldap_x_ext_io_fns sess_io_fns; /* the saved layered ld fns from the layer we are "pushing" */
+ struct lber_x_ext_io_fns sock_io_fns; /* the saved layered ber fns from the layer we are "pushing" */
+ sasl_conn_t *sasl_ctx; /* the sasl context - pointer to the one from the connection */
+ char *sb_sasl_ibuf; /* sasl decrypted input buffer */
+ char *sb_sasl_iptr; /* current location in buffer */
+ int sb_sasl_bfsz; /* Alloc'd size of input buffer */
+ int sb_sasl_ilen; /* remaining length to process */
+ LDAP *ld; /* used to set errno */
+ Sockbuf *sb; /* pointer to our associated sockbuf */
+} SASLIOSocketArg;
+
+static void
+destroy_SASLIOSocketArg(SASLIOSocketArg** sockarg)
+{
+ if (sockarg && *sockarg) {
+ NSLDAPI_FREE((*sockarg)->sb_sasl_ibuf);
+ NSLDAPI_FREE((*sockarg));
+ *sockarg = NULL;
+ }
+}
+
+static SASLIOSocketArg*
+new_SASLIOSocketArg(sasl_conn_t *ctx, int bufsiz, LDAP *ld, Sockbuf *sb)
+{
+ SASLIOSocketArg *sockarg = NULL;
+
+ if (bufsiz <= 0) {
+ return sockarg;
+ }
+
+ sockarg = (SASLIOSocketArg*)NSLDAPI_CALLOC(1, sizeof(SASLIOSocketArg));
+ if (sockarg) {
+ sockarg->sasl_ctx = ctx;
+ sockarg->sb_sasl_ibuf = NSLDAPI_MALLOC(bufsiz);
+ if (!sockarg->sb_sasl_ibuf) {
+ destroy_SASLIOSocketArg(&sockarg);
+ return sockarg;
+ }
+ sockarg->sb_sasl_iptr = NULL;
+ sockarg->sb_sasl_bfsz = bufsiz;
+ sockarg->sb_sasl_ilen = 0;
+ sockarg->ld = ld;
+ sockarg->sb = sb;
+ }
+
+ return sockarg;
+}
+
+/*
+ * SASL Dependent routines
+ *
+ * SASL security and integrity options are supported through the
+ * use of the extended I/O functionality. Because the extended
+ * I/O functions may already be in use prior to enabling encryption,
+ * when SASL encryption si enabled, these routine interpose themselves
+ * over the exitng extended I/O routines and add an additional level
+ * of indirection.
+ * IE: Before SASL: client->libldap->lber->extio
+ * After SASL: client->libldap->lber->saslio->extio
+ * Any extio function are stilled used for the raw i/O [IE prldap]
+ * but SASL will decrypt before passing to lber.
+ * SASL cannot decrypt a stream so full packaets must be read
+ * before proceeding.
+ */
+
+/*
+ * Get the 4 octet header [size] for a sasl encrypted buffer.
+ * See RFC222 [section 3].
+ */
+static int
+nsldapi_sasl_pktlen( char *buf, int maxbufsize )
+{
+ int size;
+
+#if defined( _WINDOWS ) || defined( _WIN32 )
+ size = ntohl(*(u_long *)buf);
+#else
+ size = ntohl(*(uint32_t *)buf);
+#endif
+ if ( size < 0 || size > maxbufsize ) {
+ return (-1 );
+ }
+
+ return( size + 4 ); /* include the first 4 bytes */
+}
+
+/*
+ * SASL encryption routines
+ */
+
+static int
+nsldapi_sasl_read( int s, void *buf, int len,
+ struct lextiof_socket_private *arg)
+{
+ LDAP *ld;
+ const char *dbuf;
+ char *cp;
+ int ret;
+ unsigned dlen, blen;
+
+ ld = (LDAP *)arg->ld;
+
+ /* Is there anything left in the existing buffer? */
+ if ((ret = arg->sb_sasl_ilen) > 0) {
+ ret = (ret > len ? len : ret);
+ SAFEMEMCPY( buf, arg->sb_sasl_iptr, ret );
+ if (ret == arg->sb_sasl_ilen) {
+ arg->sb_sasl_ilen = 0;
+ arg->sb_sasl_iptr = NULL;
+ } else {
+ arg->sb_sasl_ilen -= ret;
+ arg->sb_sasl_iptr += ret;
+ }
+ return( ret );
+ }
+
+ /* buffer is empty - fill it */
+ cp = arg->sb_sasl_ibuf;
+ dlen = 0;
+
+ /* Read the length of the packet */
+ while ( dlen < 4 ) {
+ if (arg->sock_io_fns.lbextiofn_read != NULL) {
+ ret = arg->sock_io_fns.lbextiofn_read(
+ s, cp, 4 - dlen,
+ arg->sock_io_fns.lbextiofn_socket_arg);
+ } else {
+ ret = read( s, cp, 4 - dlen );
+ }
+#ifdef EINTR
+ if ( ( ret < 0 ) && ( LDAP_GET_ERRNO(ld) == EINTR ) )
+ continue;
+#endif
+ if ( ret <= 0 )
+ return( ret );
+
+ cp += ret;
+ dlen += ret;
+ }
+
+ blen = 4;
+
+ ret = nsldapi_sasl_pktlen( arg->sb_sasl_ibuf, arg->sb_sasl_bfsz );
+ if (ret < 0) {
+ LDAP_SET_ERRNO(ld, EIO);
+ return( -1 );
+ }
+ dlen = ret - dlen;
+
+ /* read the rest of the encrypted packet */
+ while ( dlen > 0 ) {
+ if (arg->sock_io_fns.lbextiofn_read != NULL) {
+ ret = arg->sock_io_fns.lbextiofn_read(
+ s, cp, dlen,
+ arg->sock_io_fns.lbextiofn_socket_arg);
+ } else {
+ ret = read( s, cp, dlen );
+ }
+
+#ifdef EINTR
+ if ( ( ret < 0 ) && ( LDAP_GET_ERRNO(ld) == EINTR ) )
+ continue;
+#endif
+ if ( ret <= 0 )
+ return( ret );
+
+ cp += ret;
+ blen += ret;
+ dlen -= ret;
+ }
+
+ /* Decode the packet */
+ ret = sasl_decode( arg->sasl_ctx,
+ arg->sb_sasl_ibuf, blen,
+ &dbuf, &dlen);
+ if ( ret != SASL_OK ) {
+ /* sb_sasl_read: failed to decode packet, drop it, error */
+ arg->sb_sasl_iptr = NULL;
+ arg->sb_sasl_ilen = 0;
+ LDAP_SET_ERRNO(ld, EIO);
+ return( -1 );
+ }
+
+ /* copy decrypted packet to the input buffer */
+ SAFEMEMCPY( arg->sb_sasl_ibuf, dbuf, dlen );
+ arg->sb_sasl_iptr = arg->sb_sasl_ibuf;
+ arg->sb_sasl_ilen = dlen;
+
+ ret = (dlen > (unsigned) len ? len : dlen);
+ SAFEMEMCPY( buf, arg->sb_sasl_iptr, ret );
+ if (ret == arg->sb_sasl_ilen) {
+ arg->sb_sasl_ilen = 0;
+ arg->sb_sasl_iptr = NULL;
+ } else {
+ arg->sb_sasl_ilen -= ret;
+ arg->sb_sasl_iptr += ret;
+ }
+ return( ret );
+}
+
+static int
+nsldapi_sasl_write( int s, const void *buf, int len,
+ struct lextiof_socket_private *arg)
+{
+ int ret = 0;
+ const char *obuf, *optr, *cbuf = (const char *)buf;
+ unsigned olen, clen, tlen = 0;
+ unsigned *maxbuf;
+
+ ret = sasl_getprop(arg->sasl_ctx, SASL_MAXOUTBUF,
+ (const void **)&maxbuf);
+ if ( ret != SASL_OK ) {
+ /* just a sanity check, should never happen */
+ return( -1 );
+ }
+
+ while (len > 0) {
+ clen = (len > *maxbuf) ? *maxbuf : len;
+ /* encode the next packet. */
+ ret = sasl_encode( arg->sasl_ctx, cbuf, clen, &obuf, &olen);
+ if ( ret != SASL_OK ) {
+ /* XXX Log error? "sb_sasl_write: failed to encode packet..." */
+ return( -1 );
+ }
+ /* Write everything now, buffer is only good until next sasl_encode */
+ optr = obuf;
+ while (olen > 0) {
+ if (arg->sock_io_fns.lbextiofn_write != NULL) {
+ ret = arg->sock_io_fns.lbextiofn_write(
+ s, optr, olen,
+ arg->sock_io_fns.lbextiofn_socket_arg);
+ } else {
+ ret = write( s, optr, olen);
+ }
+ if ( ret < 0 )
+ return( ret );
+ optr += ret;
+ olen -= ret;
+ }
+ len -= clen;
+ cbuf += clen;
+ tlen += clen;
+ }
+ return( tlen );
+}
+
+/*
+ * What's all this then?
+ * First, take a look at os-ip.c:nsldapi_add_to_cb_pollfds(). When a new descriptor is
+ * added to the pollfds array, the lpoll_socketarg field is initialized to the value from
+ * the socketarg field - sb->sb_ext_io_fns.lbextiofn_socket_arg. In our case, since we
+ * override this with our sasl data (see below nsldapi_sasl_install), we need to restore
+ * the previous value so that the layer below us (i.e. prldap) can use the lpoll_socketarg
+ * which it sets.
+ * So how do which know which fds[i] is a "sasl" fd?
+ * We initialize the lextiof_session_private *arg (see nsldapi_sasl_install) to point to
+ * the socket_private data in sb->sb_ext_io_fns.lbextiofn_socket_arg for "sasl" sockets,
+ * which is then used to initialize lpoll_socketarg (see above).
+ * So, if the arg which gets passed into nsldapi_sasl_poll is the same as the
+ * fds[i].lpoll_socketarg, we know it is a "sasl" socket and we need to "pop" the sasl
+ * layer. We do this by replacing lpoll_socketarg with the one we saved when we "pushed"
+ * the sasl layer.
+ * So why the loop to restore the sasl lpoll_socketarg?
+ * The lower layer only uses lpoll_socketarg during poll(). See ldappr-io.c:prldap_poll()
+ * for more information about how that works. However, after the polling is done, there
+ * is some special magic in os-ip.c in the functions nsldapi_add_to_cb_pollfds(),
+ * nsldapi_clear_from_cb_pollfds(), and nsldapi_find_in_cb_pollfds() to find the correct
+ * Sockbuf to operate on. This is the macro NSLDAPI_CB_POLL_MATCH(). For the extended
+ * io function callbacks to work correctly, it is not sufficient to say that the file
+ * descriptor in the Sockbuf matches the one that poll says has activity - we also need
+ * to match the lpoll_socketarg with the sb->sb_ext_io_fns.lbextiofn_socket_arg to make
+ * sure this really is the Sockbuf we want to use. So we have to restore the
+ * lpoll_socketarg with the original one.
+ * Why have origarg and staticorigarg?
+ * To avoid malloc. The sizeof staticorigarg should be large enough to accomodate almost
+ * all clients without incurring too much additional overhead. However, if we need more
+ * room, origarg will grow to nfds. If this proves to be inadequate, the size of the
+ * staticorigarg is a good candidate for a #define set by configure.
+ */
+static int
+nsldapi_sasl_poll(
+ LDAP_X_PollFD fds[], int nfds, int timeout,
+ struct lextiof_session_private *arg )
+{
+ LDAP_X_EXTIOF_POLL_CALLBACK *origpoll; /* poll fn from the pushed layer */
+ struct lextiof_session_private *origsess = NULL; /* session arg from the pushed layer */
+ SASLIOSocketArg **origarg = NULL; /* list of saved original socket args */
+ SASLIOSocketArg *staticorigarg[1024]; /* default list to avoid malloc */
+ int origargsize = sizeof(staticorigarg)/sizeof(staticorigarg[0]);
+ int rc = -1; /* the return code - -1 means failure */
+
+ if (arg == NULL) { /* should not happen */
+ return( rc );
+ }
+
+ origarg = staticorigarg;
+ /* if the static array is not large enough, alloc a dynamic one */
+ if (origargsize < nfds) {
+ origarg = (SASLIOSocketArg **)NSLDAPI_MALLOC(nfds*sizeof(SASLIOSocketArg *));
+ }
+
+ if (fds && nfds > 0) {
+ int i;
+ for(i = 0; i < nfds; i++) {
+ /* save the original socket arg */
+ origarg[i] = fds[i].lpoll_socketarg;
+ if (arg == (struct lextiof_session_private *)fds[i].lpoll_socketarg) {
+ /* lpoll_socketarg is a sasl socket arg - we need to replace it
+ with the one from the layer we pushed (i.e. prldap) */
+ SASLIOSocketArg *sockarg = (SASLIOSocketArg *)fds[i].lpoll_socketarg;
+ /* reset to pushed layer's socket arg */
+ fds[i].lpoll_socketarg = sockarg->sock_io_fns.lbextiofn_socket_arg;
+ /* grab the pushed layers' poll fn and its session arg */
+ if (!origsess) {
+ origpoll = sockarg->sess_io_fns.lextiof_poll;
+ origsess = sockarg->sess_io_fns.lextiof_session_arg;
+ }
+ }
+ }
+ }
+
+ if (origsess == NULL) { /* should not happen */
+ goto done;
+ }
+
+ /* call the "real" poll function */
+ rc = origpoll( fds, nfds, timeout, origsess );
+
+ /* reset the lpoll_socketarg values to their original values because
+ they must match what's in sb->iofns->lbextiofn_socket_arg in order
+ for NSLDAPI_CB_POLL_MATCH to work - see os-ip.c */
+ if (fds && nfds > 0) {
+ int i;
+ for(i = 0; i < nfds; i++) {
+ if ((SASLIOSocketArg *)arg == origarg[i]) {
+ fds[i].lpoll_socketarg = origarg[i];
+ }
+ }
+ }
+
+done:
+ /* if we had to use a dynamic array, free it */
+ if (origarg != staticorigarg) {
+ NSLDAPI_FREE(origarg);
+ }
+
+ return rc;
+}
+
+int
+nsldapi_sasl_open( LDAP *ld, LDAPConn *lconn, sasl_conn_t **ctx, sasl_ssf_t ssf )
+{
+ int saslrc;
+ char *host = NULL;
+
+ if ( !NSLDAPI_VALID_LDAP_POINTER( ld )) {
+ LDAP_SET_LDERRNO( ld, LDAP_LOCAL_ERROR, NULL, NULL );
+ return( LDAP_LOCAL_ERROR );
+ }
+
+ if ( lconn == NULL ) {
+ if ( ld->ld_defconn == NULL ||
+ ld->ld_defconn->lconn_status != LDAP_CONNST_CONNECTED) {
+ int rc = nsldapi_open_ldap_defconn( ld );
+ if( rc < 0 ) {
+ return( LDAP_GET_LDERRNO( ld, NULL, NULL ) );
+ }
+ }
+ lconn = ld->ld_defconn;
+ }
+
+ /* need to clear out the old context for this connection, if any */
+ /* client may have re-bind-ed this connection without closing first */
+ if (lconn->lconn_sasl_ctx) {
+ sasl_dispose(&lconn->lconn_sasl_ctx);
+ lconn->lconn_sasl_ctx = NULL;
+ }
+
+ if ( 0 != ldap_get_option( ld, LDAP_OPT_HOST_NAME, &host ) ) {
+ LDAP_SET_LDERRNO( ld, LDAP_LOCAL_ERROR, NULL, NULL );
+ return( LDAP_LOCAL_ERROR );
+ }
+
+ saslrc = sasl_client_new( "ldap", host,
+ NULL, NULL, /* iplocalport, ipremoteport - use defaults */
+ NULL, 0, ctx );
+ ldap_memfree(host);
+
+ if ( (saslrc != SASL_OK) || (!*ctx) ) {
+ return( nsldapi_sasl_cvterrno( ld, saslrc, NULL ) );
+ }
+
+ if( ssf ) {
+ sasl_ssf_t extprops;
+ memset(&extprops, 0L, sizeof(extprops));
+ extprops = ssf;
+
+ (void) sasl_setprop( *ctx, SASL_SSF_EXTERNAL,
+ (void *) &extprops );
+ }
+
+ /* (re)set security properties */
+ sasl_setprop( *ctx, SASL_SEC_PROPS, &ld->ld_sasl_secprops );
+
+ /* set the connection context */
+ lconn->lconn_sasl_ctx = *ctx;
+
+ return( LDAP_SUCCESS );
+}
+
+static int
+nsldapi_sasl_close( struct lextiof_socket_private *arg )
+{
+ /* undo function pointer interposing */
+ ldap_set_option( arg->ld, LDAP_X_OPT_EXTIO_FN_PTRS, &arg->sess_io_fns );
+ /* have to do this separately to make sure the socketarg is set correctly */
+ ber_sockbuf_set_option( arg->sb,
+ LBER_SOCKBUF_OPT_EXT_IO_FNS,
+ (void *)&arg->sock_io_fns );
+
+ destroy_SASLIOSocketArg(&arg);
+ return( LDAP_SUCCESS );
+}
+
+static int
+nsldapi_sasl_close_socket(int s, struct lextiof_socket_private *arg )
+{
+ LDAP_X_EXTIOF_CLOSE_CALLBACK *origclose;
+ struct lextiof_socket_private *origsock;
+
+ if (arg == NULL) {
+ return( -1 );
+ }
+
+ origclose = arg->sess_io_fns.lextiof_close;
+ origsock = arg->sock_io_fns.lbextiofn_socket_arg;
+
+ /* undo SASL */
+ nsldapi_sasl_close( arg );
+ arg = NULL;
+ /* arg is destroyed at this point - do not use it */
+
+ if (origclose )
+ return ( origclose( s, origsock ) );
+ else {
+ /* This is a copy of nsldapi_os_closesocket()
+ * from os-ip.c. It is declared static there,
+ * hence the copy of it.
+ */
+ int rc;
+
+#ifdef NSLDAPI_AVOID_OS_SOCKETS
+ rc = -1;
+#else /* NSLDAPI_AVOID_OS_SOCKETS */
+#ifdef _WINDOWS
+ rc = closesocket( s );
+#else /* _WINDOWS */
+ rc = close( s );
+#endif /* _WINDOWS */
+#endif /* NSLDAPI_AVOID_OS_SOCKETS */
+ return( rc );
+ }
+
+}
+
+/*
+ * install encryption routines if security has been negotiated
+ */
+int
+nsldapi_sasl_install( LDAP *ld, LDAPConn *lconn )
+{
+ struct lber_x_ext_io_fns fns;
+ struct ldap_x_ext_io_fns iofns;
+ sasl_security_properties_t *secprops;
+ int rc, value;
+ int bufsiz;
+ Sockbuf *sb = NULL;
+ sasl_conn_t *ctx = NULL;
+ SASLIOSocketArg *sockarg = NULL;
+
+ if ( lconn == NULL ) {
+ lconn = ld->ld_defconn;
+ if ( lconn == NULL ) {
+ return( LDAP_LOCAL_ERROR );
+ }
+ }
+ if ( (sb = lconn->lconn_sb) == NULL ) {
+ return( LDAP_LOCAL_ERROR );
+ }
+ rc = ber_sockbuf_get_option( sb,
+ LBER_SOCKBUF_OPT_TO_FILE_ONLY,
+ (void *) &value);
+ if (rc != 0 || value != 0) {
+ return( LDAP_LOCAL_ERROR );
+ }
+
+ /* the sasl context in the lconn must have been set prior to this */
+ ctx = lconn->lconn_sasl_ctx;
+ rc = sasl_getprop( ctx, SASL_SEC_PROPS,
+ (const void **)&secprops );
+ if (rc != SASL_OK)
+ return( LDAP_LOCAL_ERROR );
+ bufsiz = secprops->maxbufsize;
+ if (bufsiz <= 0) {
+ return( LDAP_LOCAL_ERROR );
+ }
+
+ /* create our socket specific context */
+ sockarg = new_SASLIOSocketArg(ctx, bufsiz, ld, sb);
+ if (!sockarg) {
+ return( LDAP_LOCAL_ERROR );
+ }
+
+ /* save a copy of the existing io fns and the session arg */
+ memset( &sockarg->sess_io_fns, 0, LDAP_X_EXTIO_FNS_SIZE );
+ sockarg->sess_io_fns.lextiof_size = LDAP_X_EXTIO_FNS_SIZE;
+ rc = ldap_get_option( ld, LDAP_X_OPT_EXTIO_FN_PTRS,
+ &sockarg->sess_io_fns );
+ if (rc != 0) {
+ destroy_SASLIOSocketArg(&sockarg);
+ return( LDAP_LOCAL_ERROR );
+ }
+
+ /* save a copy of the existing ber io fns and the socket arg */
+ memset( &sockarg->sock_io_fns, 0, LBER_X_EXTIO_FNS_SIZE );
+ sockarg->sock_io_fns.lbextiofn_size = LBER_X_EXTIO_FNS_SIZE;
+ rc = ber_sockbuf_get_option( sb,
+ LBER_SOCKBUF_OPT_EXT_IO_FNS,
+ (void *)&sockarg->sock_io_fns);
+ if (rc != 0) {
+ destroy_SASLIOSocketArg(&sockarg);
+ return( LDAP_LOCAL_ERROR );
+ }
+
+ /* Always set the ext io close fn pointer to ensure we
+ * clean up our sockarg context */
+ memset( &iofns, 0, sizeof(iofns));
+ /* first, copy struct - sets defaults */
+ iofns = sockarg->sess_io_fns;
+ iofns.lextiof_close = nsldapi_sasl_close_socket;
+ iofns.lextiof_session_arg = sockarg; /* needed for close and poll */
+
+ /* Set new values for the other ext io funcs if there are any -
+ when using the native io fns (as opposed to prldap) there
+ won't be any */
+ if ( sockarg->sess_io_fns.lextiof_read != NULL ||
+ sockarg->sess_io_fns.lextiof_write != NULL ||
+ sockarg->sess_io_fns.lextiof_poll != NULL ||
+ sockarg->sess_io_fns.lextiof_connect != NULL ) {
+ /* next, just reset those functions we want to override */
+ iofns.lextiof_read = nsldapi_sasl_read;
+ iofns.lextiof_write = nsldapi_sasl_write;
+ iofns.lextiof_poll = nsldapi_sasl_poll;
+ }
+
+ /* set the ext io funcs */
+ rc = ldap_set_option( ld, LDAP_X_OPT_EXTIO_FN_PTRS, &iofns );
+ if (rc != 0) {
+ /* frees everything and resets fns above */
+ nsldapi_sasl_close(sockarg);
+ return( LDAP_LOCAL_ERROR );
+ }
+
+ /* set the new ber io funcs and socket arg */
+ (void) memset( &fns, 0, LBER_X_EXTIO_FNS_SIZE);
+ fns.lbextiofn_size = LBER_X_EXTIO_FNS_SIZE;
+ fns.lbextiofn_read = nsldapi_sasl_read;
+ fns.lbextiofn_write = nsldapi_sasl_write;
+ fns.lbextiofn_socket_arg = sockarg;
+ rc = ber_sockbuf_set_option( sb,
+ LBER_SOCKBUF_OPT_EXT_IO_FNS,
+ (void *)&fns);
+ if (rc != 0) {
+ /* frees everything and resets fns above */
+ nsldapi_sasl_close(sockarg);
+ return( LDAP_LOCAL_ERROR );
+ }
+
+ return( LDAP_SUCCESS );
+}
+
+#endif
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-10 17:49:15 +0000