From: Guilhem Moulin Date: Fri, 09 Jun 2017 13:21:23 +0200 Subject: build without TLS support tls.h isn't available in libsd-dev, and TLS supports adds options (-C, -Z) that are already used by our Debian-specific patches. --- Makefile | 2 nc.1 | 114 ++--------------------------------------- netcat.c | 172 +++++++++++++++++++++++++++++++++++++++++++++++++++++---------- 3 files changed, 153 insertions(+), 135 deletions(-) --- a/Makefile +++ b/Makefile @@ -2,8 +2,6 @@ PROG= nc SRCS= netcat.c atomicio.c socks.c -LDADD+= -ltls -lssl -lcrypto -DPADD+= ${LIBTLS} ${LIBSSL} ${LIBCRYPTO} LIBS= `pkg-config --libs libbsd` -lresolv OBJS= $(SRCS:.c=.o) --- a/nc.1 +++ b/nc.1 @@ -33,20 +33,14 @@ .Nd arbitrary TCP and UDP connections and listens .Sh SYNOPSIS .Nm nc -.Op Fl 46cDdFhklNnrStUuvz -.Op Fl C Ar certfile -.Op Fl e Ar name -.Op Fl H Ar hash +.Op Fl 46DdFhklNnrStUuvz .Op Fl I Ar length .Op Fl i Ar interval -.Op Fl K Ar keyfile .Op Fl M Ar ttl .Op Fl m Ar minttl .Op Fl O Ar length -.Op Fl o Ar staplefile .Op Fl P Ar proxy_username .Op Fl p Ar source_port -.Op Fl R Ar CAfile .Op Fl s Ar source .Op Fl T Ar keyword .Op Fl V Ar rtable @@ -54,7 +48,6 @@ .Op Fl w Ar timeout .Op Fl X Ar proxy_protocol .Op Fl x Ar proxy_address Ns Op : Ns Ar port -.Op Fl Z Ar peercertfile .Op Ar destination .Op Ar port .Sh DESCRIPTION @@ -99,28 +92,10 @@ The options are as follows: Use IPv4 addresses only. .It Fl 6 Use IPv6 addresses only. -.It Fl C Ar certfile -Load the public key part of the TLS peer certificate from -.Ar certfile , -in PEM format. -Requires -.Fl c . -.It Fl c -Use TLS to connect or listen. -Cannot be used together with any of the options -.Fl FuU . .It Fl D Enable debugging on the socket. .It Fl d Do not attempt to read from stdin. -.It Fl e Ar name -Only accept the TLS peer certificate if it contains the -.Ar name . -Requires -.Fl c . -If not specified, -.Ar destination -is used. .It Fl F Pass the first connected socket using .Xr sendmsg 2 @@ -137,18 +112,7 @@ using the .Cm ProxyUseFdpass option). Cannot be used with -.Fl c -or .Fl U . -.It Fl H Ar hash -Only accept the TLS peer certificate if its hash returned from -.Xr tls_peer_cert_hash 3 -matches -.Ar hash . -Requires -.Fl c -and cannot be used with -.Fl T Cm noverify . .It Fl h Print out the .Nm @@ -160,12 +124,6 @@ Sleep for .Ar interval seconds between lines of text sent and received. Also causes a delay time between connections to multiple ports. -.It Fl K Ar keyfile -Load the TLS private key from -.Ar keyfile , -in PEM format. -Requires -.Fl c . .It Fl k When a connection is completed, listen for another one. Requires @@ -196,15 +154,6 @@ Do not do any DNS or service lookups on hostnames or ports. .It Fl O Ar length Specify the size of the TCP send buffer. -.It Fl o Ar staplefile -During the TLS handshake, load data to be stapled from -.Ar staplefile , -which is expected to contain an OCSP response from an OCSP server in -DER format. -Requires -.Fl c -and -.Fl C . .It Fl P Ar proxy_username Specifies a username to present to a proxy server that requires authentication. If no username is specified then authentication will not be attempted. @@ -213,13 +162,6 @@ Proxy authentication is only supported f Specify the source port .Nm should use, subject to privilege restrictions and availability. -.It Fl R Ar CAfile -Load the root CA bundle for TLS certificate verification from -.Ar CAfile , -in PEM format, instead of -.Pa /etc/ssl/cert.pem . -Requires -.Fl c . .It Fl r Choose source and/or destination ports randomly instead of sequentially within a range or in the order that the system @@ -239,35 +181,7 @@ Cannot be used together with or .Fl x . .It Fl T Ar keyword -Change the IPv4 TOS/IPv6 traffic class value or the TLS options. -.Pp -For TLS options, -.Ar keyword -may be one of: -.Cm noverify , -which disables certificate verification; -.Cm noname , -which disables certificate name checking; -.Cm clientcert , -which requires a client certificate on incoming connections; or -.Cm muststaple , -which requires the peer to provide a valid stapled OCSP response -with the handshake. -The following TLS options specify a value in the form of a -.Ar key Ns = Ns Ar value -pair: -.Cm ciphers , -which allows the supported TLS ciphers to be specified (see -.Xr tls_config_set_ciphers 3 -for further details); -.Cm protocols , -which allows the supported TLS protocols to be specified (see -.Xr tls_config_parse_protocols 3 -for further details). -Specifying TLS options requires -.Fl c . -.Pp -For the IPv4 TOS/IPv6 traffic class value, +Change the IPv4 TOS/IPv6 traffic class value. .Ar keyword may be one of .Cm critical , @@ -291,13 +205,13 @@ to script telnet sessions. Use .Ux Ns -domain sockets. -Cannot be used together with any of the options -.Fl cFx . +Cannot be used together with +.Fl F +or +.Fl x . .It Fl u Use UDP instead of TCP. Cannot be used together with -.Fl c -or .Fl x . For .Ux Ns -domain @@ -360,12 +274,6 @@ An IPv6 address can be specified unambig in square brackets. A proxy cannot be used with any of the options .Fl lsuU . -.It Fl Z Ar peercertfile -Save the peer certificates to -.Ar peercertfile , -in PEM format. -Requires -.Fl c . .It Fl z Only scan for listening daemons, without sending any data to them. Cannot be used together with @@ -519,16 +427,6 @@ the source port, with a timeout of 5 sec .Pp .Dl $ nc -p 31337 -w 5 host.example.com 42 .Pp -Open a TCP connection to port 443 of www.example.com, and negotiate TLS with -any supported TLS protocol version and "compat" ciphers: -.Pp -.Dl $ nc -cv -T protocols=all -T ciphers=compat www.example.com 443 -.Pp -Open a TCP connection to port 443 of www.google.ca, and negotiate TLS. -Check for a different name in the certificate for validation: -.Pp -.Dl $ nc -cv -e adsf.au.doubleclick.net www.google.ca 443 -.Pp Open a UDP connection to port 53 of host.example.com: .Pp .Dl $ nc -u host.example.com 53 --- a/netcat.c +++ b/netcat.c @@ -99,7 +99,9 @@ #include #include #include -#include +#ifdef TLS +# include +#endif #include #include #include @@ -115,10 +117,12 @@ #define POLL_STDOUT 3 #define BUFSIZE 16384 -#define TLS_NOVERIFY (1 << 1) -#define TLS_NONAME (1 << 2) -#define TLS_CCERT (1 << 3) -#define TLS_MUSTSTAPLE (1 << 4) +#ifdef TLS +# define TLS_NOVERIFY (1 << 1) +# define TLS_NONAME (1 << 2) +# define TLS_CCERT (1 << 3) +# define TLS_MUSTSTAPLE (1 << 4) +#endif /* Command Line Options */ int dflag; /* detached, no stdin */ @@ -144,6 +148,7 @@ int Sflag; /* TCP MD5 signature opti int Tflag = -1; /* IP Type of Service */ int rtableid = -1; +# if defined(TLS) int usetls; /* use TLS */ const char *Cflag; /* Public cert file */ const char *Kflag; /* Private key file */ @@ -156,6 +161,7 @@ char *tls_expecthash; /* required hash char *tls_ciphers; /* TLS ciphers */ char *tls_protocols; /* TLS protocols */ FILE *Zflag; /* file to save peer cert */ +# endif int recvcount, recvlimit; int timeout = -1; @@ -170,10 +176,16 @@ int strtoport(char *portstr, int udp); void build_ports(char *); void help(void) __attribute__((noreturn)); int local_listen(const char *, const char *, struct addrinfo); +# if defined(TLS) void readwrite(int, struct tls *); +# else +void readwrite(int); +# endif void fdpass(int nfd) __attribute__((noreturn)); int remote_connect(const char *, const char *, struct addrinfo); +# if defined(TLS) int timeout_tls(int, struct tls *, int (*)(struct tls *)); +# endif int timeout_connect(int, const struct sockaddr *, socklen_t); int socks_connect(const char *, const char *, struct addrinfo, const char *, const char *, struct addrinfo, int, const char *); @@ -183,15 +195,24 @@ int unix_connect(char *); int unix_listen(char *); void set_common_sockopts(int, int); int process_tos_opt(char *, int *); +# if defined(TLS) int process_tls_opt(char *, int *); void save_peer_cert(struct tls *_tls_ctx, FILE *_fp); +# endif void report_sock(const char *, const struct sockaddr *, socklen_t, char *); +# if defined(TLS) void report_tls(struct tls *tls_ctx, char * host); +# endif void usage(int); +# if defined(TLS) ssize_t drainbuf(int, unsigned char *, size_t *, struct tls *); ssize_t fillbuf(int, unsigned char *, size_t *, struct tls *); void tls_setup_client(struct tls *, int, char *); struct tls *tls_setup_server(struct tls *, int, char *); +# else +ssize_t drainbuf(int, unsigned char *, size_t *); +ssize_t fillbuf(int, unsigned char *, size_t *); +# endif int main(int argc, char *argv[]) @@ -206,8 +227,10 @@ main(int argc, char *argv[]) const char *errstr; struct addrinfo proxyhints; char unix_dg_tmp_socket_buf[UNIX_DG_TMP_SOCKET_SIZE]; +# if defined(TLS) struct tls_config *tls_cfg = NULL; struct tls *tls_ctx = NULL; +# endif uint32_t protocols; ret = 1; @@ -215,12 +238,18 @@ main(int argc, char *argv[]) host = NULL; uport = NULL; sv = NULL; +# if defined(TLS) Rflag = tls_default_ca_cert_file(); +# endif signal(SIGPIPE, SIG_IGN); while ((ch = getopt(argc, argv, +# if defined(TLS) "46C:cDde:FH:hI:i:K:klM:m:NnO:o:P:p:R:rSs:T:tUuV:vW:w:X:x:Z:z")) +# else + "46DdFhI:i:klM:m:NnO:P:p:rSs:T:tUuV:vW:w:X:x:z")) +# endif != -1) { switch (ch) { case '4': @@ -242,24 +271,30 @@ main(int argc, char *argv[]) else errx(1, "unsupported proxy protocol"); break; +# if defined(TLS) case 'C': Cflag = optarg; break; case 'c': usetls = 1; break; +# endif case 'd': dflag = 1; break; +# if defined(TLS) case 'e': tls_expectname = optarg; break; +# endif case 'F': Fflag = 1; break; +# if defined(TLS) case 'H': tls_expecthash = optarg; break; +# endif case 'h': help(); break; @@ -268,9 +303,11 @@ main(int argc, char *argv[]) if (errstr) errx(1, "interval %s: %s", errstr, optarg); break; +# if defined(TLS) case 'K': Kflag = optarg; break; +# endif case 'k': kflag = 1; break; @@ -299,10 +336,12 @@ main(int argc, char *argv[]) case 'p': pflag = optarg; break; +# if defined(TLS) case 'R': tls_cachanged = 1; Rflag = optarg; break; +# endif case 'r': rflag = 1; break; @@ -344,12 +383,14 @@ main(int argc, char *argv[]) if ((proxy = strdup(optarg)) == NULL) err(1, NULL); break; +# if defined(TLS) case 'Z': if (strcmp(optarg, "-") == 0) Zflag = stderr; else if ((Zflag = fopen(optarg, "w")) == NULL) err(1, "can't open %s", optarg); break; +# endif case 'z': zflag = 1; break; @@ -368,9 +409,11 @@ main(int argc, char *argv[]) errx(1, "TCP send window %s: %s", errstr, optarg); break; +# if defined(TLS) case 'o': oflag = optarg; break; +# endif case 'S': # if defined(TCP_MD5SIG) Sflag = 1; @@ -381,8 +424,10 @@ main(int argc, char *argv[]) case 'T': errstr = NULL; errno = 0; +# if defined(TLS) if (process_tls_opt(optarg, &TLSopt)) break; +# endif if (process_tos_opt(optarg, &Tflag)) break; if (strlen(optarg) > 1 && optarg[0] == '0' && @@ -392,7 +437,11 @@ main(int argc, char *argv[]) Tflag = (int)strtonum(optarg, 0, 255, &errstr); if (Tflag < 0 || Tflag > 255 || errstr || errno) +# if defined(TLS) errx(1, "illegal tos/tls value %s", optarg); +# else + errx(1, "illegal tos value %s", optarg); +# endif break; default: usage(1); @@ -429,6 +478,7 @@ main(int argc, char *argv[]) } else usage(1); +# if defined(TLS) if (usetls) { if (Cflag && unveil(Cflag, "r") == -1) err(1, "unveil"); @@ -452,15 +502,19 @@ main(int argc, char *argv[]) err(1, "unveil"); } } +# endif if (!lflag && kflag) errx(1, "must use -l with -k"); +# if defined(TLS) if (uflag && usetls) errx(1, "cannot use -c and -u"); if ((family == AF_UNIX) && usetls) errx(1, "cannot use -c and -U"); +# endif if ((family == AF_UNIX) && Fflag) errx(1, "cannot use -F and -U"); +# if defined(TLS) if (Fflag && usetls) errx(1, "cannot use -c and -F"); if (TLSopt && !usetls) @@ -479,6 +533,7 @@ main(int argc, char *argv[]) errx(1, "you must specify -c to use -H"); if (tls_expectname && !usetls) errx(1, "you must specify -c to use -e"); +# endif /* Get name of temporary socket for unix datagram client */ if ((family == AF_UNIX) && uflag && !lflag) { @@ -545,6 +600,7 @@ main(int argc, char *argv[]) proxyhints.ai_flags |= AI_NUMERICHOST; } +# if defined(TLS) if (usetls) { if ((tls_cfg = tls_config_new()) == NULL) errx(1, "unable to allocate TLS config"); @@ -580,7 +636,8 @@ main(int argc, char *argv[]) err(1, "pledge"); } else if (pledge("stdio inet dns", NULL) == -1) err(1, "pledge"); - } + } +# endif if (lflag) { ret = 0; @@ -591,6 +648,7 @@ main(int argc, char *argv[]) s = unix_listen(host); } +# if defined(TLS) if (usetls) { tls_config_verify_client_optional(tls_cfg); if ((tls_ctx = tls_server()) == NULL) @@ -599,6 +657,7 @@ main(int argc, char *argv[]) errx(1, "tls configuration failed (%s)", tls_error(tls_ctx)); } +# endif /* Allow only one connection at a time, but stay alive. */ for (;;) { if (family != AF_UNIX) { @@ -614,7 +673,11 @@ main(int argc, char *argv[]) * let it receive datagrams from multiple * socket pairs. */ +# if defined(TLS) readwrite(s, NULL); +# else + readwrite(s); +# endif } else if (uflag && !kflag) { /* * For UDP and not -k, we will use recvfrom() @@ -639,9 +702,14 @@ main(int argc, char *argv[]) report_sock("Connection received", (struct sockaddr *)&z, len, NULL); +# if defined(TLS) readwrite(s, NULL); } else { struct tls *tls_cctx = NULL; +# else + readwrite(s); + } else { +# endif int connfd; len = sizeof(cliaddr); @@ -655,6 +723,7 @@ main(int argc, char *argv[]) report_sock("Connection received", (struct sockaddr *)&cliaddr, len, family == AF_UNIX ? host : NULL); +# if defined(TLS) if ((usetls) && (tls_cctx = tls_setup_server(tls_ctx, connfd, host))) readwrite(connfd, tls_cctx); @@ -664,6 +733,10 @@ main(int argc, char *argv[]) timeout_tls(s, tls_cctx, tls_close); close(connfd); tls_free(tls_cctx); +# else + readwrite(connfd); + close(connfd); +# endif } if (family == AF_UNIX && uflag) { if (connect(s, NULL, 0) == -1) @@ -678,7 +751,11 @@ main(int argc, char *argv[]) if ((s = unix_connect(host)) > 0) { if (!zflag) +# if defined(TLS) readwrite(s, NULL); +# else + readwrite(s); +# endif close(s); } else { warn("%s", host); @@ -699,6 +776,7 @@ main(int argc, char *argv[]) for (s = -1, i = 0; portlist[i] != NULL; i++) { if (s != -1) close(s); +# if defined(TLS) tls_free(tls_ctx); tls_ctx = NULL; @@ -709,6 +787,7 @@ main(int argc, char *argv[]) errx(1, "tls configuration failed (%s)", tls_error(tls_ctx)); } +# endif if (xflag) s = socks_connect(host, portlist[i], hints, proxy, proxyport, proxyhints, socksv, @@ -746,6 +825,7 @@ main(int argc, char *argv[]) } if (Fflag) fdpass(s); +# if defined(TLS) else { if (usetls) tls_setup_client(tls_ctx, s, host); @@ -754,13 +834,19 @@ main(int argc, char *argv[]) if (tls_ctx) timeout_tls(s, tls_ctx, tls_close); } +# else + else if (!zflag) + readwrite(s); +# endif } } if (s != -1) close(s); +# if defined(TLS) tls_free(tls_ctx); tls_config_free(tls_cfg); +# endif return ret; } @@ -802,6 +888,7 @@ unix_bind(char *path, int flags) return s; } +# if defined(TLS) int timeout_tls(int s, struct tls *tls_ctx, int (*func)(struct tls *)) { @@ -888,6 +975,7 @@ tls_setup_server(struct tls *tls_ctx, in } return NULL; } +# endif /* * unix_connect() @@ -1113,7 +1201,11 @@ local_listen(const char *host, const cha * Loop that polls on the network file descriptor and stdin. */ void +# if defined(TLS) readwrite(int net_fd, struct tls *tls_ctx) +# else +readwrite(int net_fd) +# endif { struct pollfd pfd[4]; int stdin_fd = STDIN_FILENO; @@ -1213,12 +1305,17 @@ readwrite(int net_fd, struct tls *tls_ct /* try to read from stdin */ if (pfd[POLL_STDIN].revents & POLLIN && stdinbufpos < BUFSIZE) { ret = fillbuf(pfd[POLL_STDIN].fd, stdinbuf, +# if defined(TLS) &stdinbufpos, NULL); if (ret == TLS_WANT_POLLIN) pfd[POLL_STDIN].events = POLLIN; else if (ret == TLS_WANT_POLLOUT) pfd[POLL_STDIN].events = POLLOUT; - else if (ret == 0 || ret == -1) + else +# else + &stdinbufpos); +# endif + if (ret == 0 || ret == -1) pfd[POLL_STDIN].fd = -1; /* read something - poll net out */ if (stdinbufpos > 0) @@ -1230,12 +1327,17 @@ readwrite(int net_fd, struct tls *tls_ct /* try to write to network */ if (pfd[POLL_NETOUT].revents & POLLOUT && stdinbufpos > 0) { ret = drainbuf(pfd[POLL_NETOUT].fd, stdinbuf, +# if defined(TLS) &stdinbufpos, tls_ctx); if (ret == TLS_WANT_POLLIN) pfd[POLL_NETOUT].events = POLLIN; else if (ret == TLS_WANT_POLLOUT) pfd[POLL_NETOUT].events = POLLOUT; - else if (ret == -1) + else +# else + &stdinbufpos); +# endif + if (ret == -1) pfd[POLL_NETOUT].fd = -1; /* buffer empty - remove self from polling */ if (stdinbufpos == 0) @@ -1247,12 +1349,17 @@ readwrite(int net_fd, struct tls *tls_ct /* try to read from network */ if (pfd[POLL_NETIN].revents & POLLIN && netinbufpos < BUFSIZE) { ret = fillbuf(pfd[POLL_NETIN].fd, netinbuf, +# if defined(TLS) &netinbufpos, tls_ctx); if (ret == TLS_WANT_POLLIN) pfd[POLL_NETIN].events = POLLIN; else if (ret == TLS_WANT_POLLOUT) pfd[POLL_NETIN].events = POLLOUT; - else if (ret == -1) + else +# else + &netinbufpos); +# endif + if (ret == -1) pfd[POLL_NETIN].fd = -1; /* eof on net in - remove from pfd */ if (ret == 0) { @@ -1279,12 +1386,17 @@ readwrite(int net_fd, struct tls *tls_ct /* try to write to stdout */ if (pfd[POLL_STDOUT].revents & POLLOUT && netinbufpos > 0) { ret = drainbuf(pfd[POLL_STDOUT].fd, netinbuf, +# if defined(TLS) &netinbufpos, NULL); if (ret == TLS_WANT_POLLIN) pfd[POLL_STDOUT].events = POLLIN; else if (ret == TLS_WANT_POLLOUT) pfd[POLL_STDOUT].events = POLLOUT; - else if (ret == -1) + else +# else + &netinbufpos); +# endif + if (ret == -1) pfd[POLL_STDOUT].fd = -1; /* buffer empty - remove self from polling */ if (netinbufpos == 0) @@ -1308,21 +1420,31 @@ readwrite(int net_fd, struct tls *tls_ct } ssize_t +# if defined(TLS) drainbuf(int fd, unsigned char *buf, size_t *bufpos, struct tls *tls) +# else +drainbuf(int fd, unsigned char *buf, size_t *bufpos) +# endif { ssize_t n; ssize_t adjust; +# if defined(TLS) if (tls) { n = tls_write(tls, buf, *bufpos); if (n == -1) errx(1, "tls write failed (%s)", tls_error(tls)); } else { +# endif n = write(fd, buf, *bufpos); /* don't treat EAGAIN, EINTR as error */ if (n == -1 && (errno == EAGAIN || errno == EINTR)) +# if defined(TLS) n = TLS_WANT_POLLOUT; } +# else + n = -2; +# endif if (n <= 0) return n; /* adjust buffer */ @@ -1334,21 +1456,31 @@ drainbuf(int fd, unsigned char *buf, siz } ssize_t +# if defined(TLS) fillbuf(int fd, unsigned char *buf, size_t *bufpos, struct tls *tls) +# else +fillbuf(int fd, unsigned char *buf, size_t *bufpos) +# endif { size_t num = BUFSIZE - *bufpos; ssize_t n; +# if defined(TLS) if (tls) { n = tls_read(tls, buf + *bufpos, num); if (n == -1) errx(1, "tls read failed (%s)", tls_error(tls)); } else { +# endif n = read(fd, buf + *bufpos, num); /* don't treat EAGAIN, EINTR as error */ if (n == -1 && (errno == EAGAIN || errno == EINTR)) +# if defined(TLS) n = TLS_WANT_POLLIN; } +# else + n = -2; +# endif if (n <= 0) return n; *bufpos += n; @@ -1666,6 +1798,7 @@ process_tos_opt(char *s, int *val) return 0; } +# if defined(TLS) int process_tls_opt(char *s, int *flags) { @@ -1779,6 +1912,7 @@ report_tls(struct tls * tls_ctx, char * } } +# endif void report_sock(const char *msg, const struct sockaddr *sa, socklen_t salen, @@ -1817,17 +1951,12 @@ help(void) fprintf(stderr, "\tCommand Summary:\n\ \t-4 Use IPv4\n\ \t-6 Use IPv6\n\ - \t-C certfile Public key file\n\ - \t-c Use TLS\n\ \t-D Enable the debug socket option\n\ \t-d Detach from stdin\n\ - \t-e name\t Required name in peer certificate\n\ \t-F Pass socket fd\n\ - \t-H hash\t Hash string of peer certificate\n\ \t-h This help text\n\ \t-I length TCP receive buffer length\n\ \t-i interval Delay interval for lines sent, ports scanned\n\ - \t-K keyfile Private key file\n\ \t-k Keep inbound sockets open for multiple connects\n\ \t-l Listen mode, for inbound connects\n\ \t-M ttl Outgoing TTL / Hop Limit\n\ @@ -1835,14 +1964,12 @@ help(void) \t-N Shutdown the network socket after EOF on stdin\n\ \t-n Suppress name/port resolutions\n\ \t-O length TCP send buffer length\n\ - \t-o staplefile Staple file\n\ \t-P proxyuser\tUsername for proxy authentication\n\ \t-p port\t Specify local port for remote connects\n\ - \t-R CAfile CA bundle\n\ \t-r Randomize remote ports\n\ \t-S Enable the TCP MD5 signature option\n\ \t-s source Local source address\n\ - \t-T keyword TOS value or TLS options\n\ + \t-T keyword TOS value\n\ \t-t Answer TELNET negotiation\n\ \t-U Use UNIX domain socket\n\ \t-u UDP mode\n\ @@ -1852,7 +1979,6 @@ help(void) \t-w timeout Timeout for connects and final net reads\n\ \t-X proto Proxy protocol: \"4\", \"5\" (SOCKS) or \"connect\"\n\ \t-x addr[:port]\tSpecify proxy address and port\n\ - \t-Z Peer certificate file\n\ \t-z Zero-I/O mode [used for scanning]\n\ Port numbers can be individual or ranges: lo-hi [inclusive]\n"); exit(0); @@ -1862,15 +1988,11 @@ void usage(int ret) { fprintf(stderr, - "usage: nc [-46cDdFhklNnrStUuvz] [-C certfile] [-e name] " - "[-H hash] [-I length]\n" - "\t [-i interval] [-K keyfile] [-M ttl] [-m minttl] [-O length]\n" - "\t [-o staplefile] [-P proxy_username] [-p source_port] " - "[-R CAfile]\n" + "usage: nc [-46DdFhklNnrStUuvz] [-I length] [-i interval] [-M ttl]\n" + "\t [-m minttl] [-O length] [-P proxy_username] [-p source_port]\n" "\t [-s source] [-T keyword] [-V rtable] [-W recvlimit] " "[-w timeout]\n" "\t [-X proxy_protocol] [-x proxy_address[:port]] " - "[-Z peercertfile]\n" "\t [destination] [port]\n"); if (ret) exit(1);