From 36cfa2e44bffd3aa5a2d41ced82ca7c0befb23e2 Mon Sep 17 00:00:00 2001 From: LukenShiro Date: Tue, 11 May 2010 22:55:25 +0200 Subject: system/openct: Added to 12.1 repository --- system/openct/README | 34 +++++++ system/openct/doinst.sh | 23 +++++ system/openct/openct.SlackBuild | 191 ++++++++++++++++++++++++++++++++++++++++ system/openct/openct.info | 8 ++ system/openct/rc.openctd | 64 ++++++++++++++ system/openct/slack-desc | 19 ++++ 6 files changed, 339 insertions(+) create mode 100644 system/openct/README create mode 100644 system/openct/doinst.sh create mode 100644 system/openct/openct.SlackBuild create mode 100644 system/openct/openct.info create mode 100644 system/openct/rc.openctd create mode 100644 system/openct/slack-desc diff --git a/system/openct/README b/system/openct/README new file mode 100644 index 0000000000..9824b881f1 --- /dev/null +++ b/system/openct/README @@ -0,0 +1,34 @@ +OpenCT implements drivers for several smart card readers. It comes as +driver in ifdhandler format for PC/SC-Lite, as CT-API driver, or as +a small and lean middleware, so applications can use it with minimal +overhead. OpenCT also has a primitive mechanism to export smart card +readers to remote machines via TCP/IP. + +This requires pcsc-lite (available on SlackBuilds.org). + +For serial and pcmcia readers only, for using it as a PC/SC ifdhandler, +you have to edit file reader-openct.conf in /etc/reader.conf.d/, to +comment lines in other file(s) and run "/usr/sbin/update-reader.conf". + +Compiling with "APIDOC=1 ./openct.SlackBuild" produces API .pdf +documentation (mainly intended for developers). + +Compiling with "NONPRIV=1 ./openct.SlackBuild" enable non-privileged +mode, but you need to modify /etc/rc.d/rc.openctd to allow 'chown' to +change user/group. + +To start OpenCT daemon, run "/etc/rc.d/rc.openctd start". This is +most easily accomplished by adding the following to /etc/rc.d/rc.local: + if [ -x /etc/rc.d/rc.openctd ]; then + /etc/rc.d/rc.openctd start + fi + +Beware! +- OpenCT daemon is meant as _alternative_ to pcsc-lite: running rc.openctd +and rc.pcscd at the same time can and will lead to unforseeable problems +(specially with usb devices that can be managed by both of them, one daemon +can claim one device, making it unavailable for other daemon). +- for some unknown reasons, if you start rc.openctd and then stop it, +you may need unplug and plug-in your usb smartcard reader in order +to it to be seen again, so udev rule is re-applied. + diff --git a/system/openct/doinst.sh b/system/openct/doinst.sh new file mode 100644 index 0000000000..359dfdfc76 --- /dev/null +++ b/system/openct/doinst.sh @@ -0,0 +1,23 @@ +config() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then + # toss the redundant copy + rm $NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} + +# Keep same perms on rc.openctd.new: +if [ -e etc/rc.d/rc.openctd ]; then + cp -a etc/rc.d/rc.openctd etc/rc.d/rc.openctd.new.incoming + cat etc/rc.d/rc.openctd.new > etc/rc.d/rc.openctd.new.incoming + mv etc/rc.d/rc.openctd.new.incoming etc/rc.d/rc.openctd.new +fi + +config etc/rc.d/rc.openctd.new +config etc/openct.conf.new +config etc/reader.conf.d/reader-openct.conf.new diff --git a/system/openct/openct.SlackBuild b/system/openct/openct.SlackBuild new file mode 100644 index 0000000000..f3db81a3e3 --- /dev/null +++ b/system/openct/openct.SlackBuild @@ -0,0 +1,191 @@ +#!/bin/sh + +# Slackware build script for openct + +# Copyright 2008 LukenShiro +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PRGNAM=openct +VERSION=${VERSION:-0.6.15} +ARCH=${ARCH:-i486} +BUILD=${BUILD:-1} +TAG=${TAG:-_SBo} + +CWD=$(pwd) +TMP=${TMP:-/tmp/SBo} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +APIDOC=${APIDOC:-0} # api documentation not built by default +NONPRIV=${NONPRIV:-0} # disable not-privileged mode (it will be used by root) +DOCFILES="NEWS TODO LGPL-2.1" + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" +fi + +set -e # Exit on most errors + +rm -rf $PKG +mkdir -p $TMP $PKG $OUTPUT +cd $TMP +rm -rf $PRGNAM-$VERSION +tar xvf $CWD/$PRGNAM-$VERSION.tar.gz +cd $PRGNAM-$VERSION +chown -R root:root . +chmod -R u+w,go+r-w,a-s . + +# building API doc +case "$APIDOC" in + 0) APIDOC_FLAG="dis" + ;; + *) APIDOC_FLAG="en" + ;; +esac + +# daemon user/group seem not to be really used unless for /var/run/openct, +# so set them to a saner 'root:root' or 'root:plugdev' (instead of upstream's +# 'openctd:usb'): for now it's unnecessary to add other user/group. +# If NONPRIV is enabled you'll have to verify /etc/rc.d/rc.openctd accordingly. +case "$NONPRIV" in + 0) NONPRIV_FLAGS="--with-daemon-user=root \ + --with-daemon-groups=root --disable-non-privileged" # root-only + ;; + *) NONPRIV_FLAGS="--with-daemon-user=root \ + --with-daemon-groups=plugdev --enable-non-privileged" # non privileged mode + ;; +esac + +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --docdir=/usr/doc/$PRGNAM-$VERSION \ + --datarootdir=/usr/share \ + --mandir=/usr/man \ + --disable-static \ + --enable-usb \ + --enable-pcsc \ + --enable-doc \ + --with-udev=/lib/udev \ + --with-bundle=/usr/lib/pcsc/drivers \ + --${APIDOC_FLAG}able-api-doc \ + --with-ifddir \ + --disable-static \ + --build=$ARCH-slackware-linux \ + $NONPRIV_FLAGS + +make +make install DESTDIR=$PKG + +# copy Slackware-compliant openct daemon (instead of original 'init-script' file) +mkdir -p $PKG/etc/rc.d +cat $CWD/rc.openctd > $PKG/etc/rc.d/rc.openctd.new +chmod 0755 $PKG/etc/rc.d/rc.openctd.new +case "$NONPRIV" in + 0) true # do nothing + ;; + *) # enable non-privileged in rc.openctd + sed -i "s|#chown root:plugdev|chown root:plugdev|g" $PKG/etc/rc.d/rc.openctd.new + sed -i "s|#chmod 750|chmod 750|g" $PKG/etc/rc.d/rc.openctd.new + ;; +esac + +# Don't clobber the config file +mv $PKG/etc/openct.conf $PKG/etc/openct.conf.new + +# used for serial devices within pcsc-lite +# entries decommented by default (as they could tamper with pcsc-lite's device detection) +# renamed to avoid pcsc-lite's reader.conf overwriting +mkdir -p $PKG/etc/reader.conf.d +cp -a etc/reader.conf $PKG/etc/reader.conf.d/reader-openct.conf.new +sed -i "s|^FRIENDLYNAME|#FRIENDLYNAME|g" $PKG/etc/reader.conf.d/reader-openct.conf.new +sed -i "s|^DEVICENAME|#DEVICENAME|g" $PKG/etc/reader.conf.d/reader-openct.conf.new +sed -i "s|^LIBPATH|#LIBPATH|g" $PKG/etc/reader.conf.d/reader-openct.conf.new +sed -i "s|^CHANNELID|#CHANNELID|g" $PKG/etc/reader.conf.d/reader-openct.conf.new + +# installing udev scripts for openct +mkdir -p $PKG/lib/udev +install -m755 etc/openct_usb $PKG/lib/udev/openct_usb +install -m755 etc/openct_pcmcia $PKG/lib/udev/openct_pcmcia +install -m755 etc/openct_serial $PKG/lib/udev/openct_serial +# to maintain forward compatibility with more recent udev (particularly Slackware post-12.1 current's udev) +sed -i "s|udevinfo|udevadm info|g" $PKG/lib/udev/openct_usb + +# installing udev rules for openct +mkdir -p $PKG/etc/udev/rules.d +cp -a etc/openct.udev $PKG/etc/udev/rules.d/95-openct.rules +# update attributes according to recent udev rules' naming convention +sed -i "s|SYSFS{|ATTR{|g" $PKG/etc/udev/rules.d/95-openct.rules +# modification taken to prevent bug (as happened in other distributions: +# i.e. https://bugzilla.redhat.com/287871): +# it seems 'sleep' program would otherwise be applied to every usb add event, +# not only to this one +sed -i "s|^PROGRAM=|#PROGRAM=|g" $PKG/etc/udev/rules.d/95-openct.rules + +# REMINDER for slackware-current post-12.1: +# as WAIT_FOR_SYSFS is replaced by WAIT_FOR in udev>=123: +#sed -i "s|WAIT_FOR_SYSFS=|WAIT_FOR=|g" $PKG/etc/udev/rules.d/95-openct.rules +# maybe it will have to be moved to /lib/udev/rules.d/, too + +# installing openct rules/script for hal +mkdir -p $PKG/usr/share/hal/fdi/information/10freedesktop/ +cp -a etc/openct.fdi $PKG/usr/share/hal/fdi/information/10freedesktop/10-usb-openct.fdi +mkdir -p $PKG/usr/libexec +cp -a etc/openct.hald $PKG/usr/libexec/hald-addon-openct + +# directory for status, socket and lock files +mkdir -p $PKG/var/run/openct +case "$NONPRIV" in + 0) USR_GRP="root:root" # root-only + ;; + *) USR_GRP="root:plugdev" # non privileged mode + ;; +esac +chown $USR_GRP $PKG/var/run/openct + +( cd $PKG + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +) + +( cd $PKG/usr/man + find . -type f -exec gzip -9 {} \; + for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done +) + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/ +cp -a $DOCFILES $PKG/usr/doc/$PRGNAM-$VERSION +cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild +cat $CWD/README > $PKG/usr/doc/$PRGNAM-$VERSION/README.SBo +[ "$APIDOC" = "0" ] && rm -rf $PKG/usr/doc/$PRGNAM-$VERSION/api + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +cat $CWD/doinst.sh > $PKG/install/doinst.sh + +cd $PKG +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz diff --git a/system/openct/openct.info b/system/openct/openct.info new file mode 100644 index 0000000000..33eb473951 --- /dev/null +++ b/system/openct/openct.info @@ -0,0 +1,8 @@ +PRGNAM="openct" +VERSION="0.6.15" +HOMEPAGE="http://www.opensc-project.org/openct/" +DOWNLOAD="http://www.opensc-project.org/files/openct/openct-0.6.15.tar.gz" +MD5SUM="70205beac03974e266fc259b6c9feaa8" +MAINTAINER="LukenShiro" +EMAIL="lukenshiro@ngi.it" +APPROVED="rworkman" diff --git a/system/openct/rc.openctd b/system/openct/rc.openctd new file mode 100644 index 0000000000..93244034ae --- /dev/null +++ b/system/openct/rc.openctd @@ -0,0 +1,64 @@ +#! /bin/sh +# +# rc.openctd +# based on original upstream openct's init-script, modified for +# SlackBuilds.org by LukenShiro ngi.it> + +PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin +DAEMON=/usr/sbin/openct-control +NAME="OpenCT smart card terminal framework" +OPENCT_OPTS="" + +set -e + +openctd_start() { + if [ -x $DAEMON ]; then + echo "Starting $NAME ..." + # create the directory for our status and socket files, + # if it does not exist. + [[ -e "/var/run/openct" ]] || mkdir -p /var/run/openct + + # maybe you also want to set ownership and permissions here. + # this example would assign the directory to a group "plugdev" + # and set permissions so only users in that group can access + # smart card readers via openct. + #chown root:plugdev /var/run/openct + #chmod 0750 /var/run/openct + + $DAEMON $OPENCT_OPTS init + fi +} + +openctd_stop() { + if [ -x $DAEMON ]; then + echo "Starting $NAME ..." + $DAEMON $OPENCT_OPTS shutdown + + # remove old status (just in case) + [[ -e "/var/run/openct/status" ]] && rm -f /var/run/openct/status + # remove socket and lock files (they seem not to be deleted by daemon) + rm -f /var/run/openct/0 /var/run/openct/status.lock* 2>&1 >/dev/null + fi +} + +openctd_restart() { + openctd_stop + sleep 0.1 # keep original sleep duration + openctd_start +} + +case "$1" in + 'start') + openctd_start + ;; + 'stop') + openctd_stop + ;; + 'restart') + openctd_restart + ;; + *) + echo "Usage: $0 {start|stop|restart}" >&2 + exit 1 + ;; +esac diff --git a/system/openct/slack-desc b/system/openct/slack-desc new file mode 100644 index 0000000000..772bb515a8 --- /dev/null +++ b/system/openct/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler---------------------------------------------------| +openct: openct (Middleware framework for smart card terminals) +openct: +openct: It implements drivers for several smart card readers. It comes as +openct: driver in ifdhandler format for PC/SC-Lite, as CT-API driver, or +openct: as a small and lean middleware, so applications can use it with +openct: minimal overhead. OpenCT also has a primitive mechanism to export +openct: smart card readers to remote machines via TCP/IP. +openct: +openct: Homepage: http://www.opensc-project.org/openct/ +openct: +openct: -- cgit v1.2.3