From 04a51f9c534d82cb73524cfa98e53bb20564522d Mon Sep 17 00:00:00 2001 From: Robby Workman Date: Thu, 6 Sep 2012 22:21:30 -0500 Subject: network/openconnect: Updated for version 3.20. Signed-off-by: Robby Workman --- network/openconnect/doinst.sh | 26 + network/openconnect/openconnect.SlackBuild | 10 +- network/openconnect/openconnect.info | 6 +- network/openconnect/vpnc-script | 749 +++++++++++++++++++++++++++++ 4 files changed, 786 insertions(+), 5 deletions(-) create mode 100644 network/openconnect/doinst.sh create mode 100644 network/openconnect/vpnc-script diff --git a/network/openconnect/doinst.sh b/network/openconnect/doinst.sh new file mode 100644 index 0000000000..556ebdd56b --- /dev/null +++ b/network/openconnect/doinst.sh @@ -0,0 +1,26 @@ +config() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then + # toss the redundant copy + rm $NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} + +preserve_perms() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + if [ -e $OLD ]; then + cp -a $OLD ${NEW}.incoming + cat $NEW > ${NEW}.incoming + mv ${NEW}.incoming $NEW + fi + config $NEW +} + +preserve_perms etc/vpnc/vpnc-script.new + diff --git a/network/openconnect/openconnect.SlackBuild b/network/openconnect/openconnect.SlackBuild index 2f9b6ad13d..cf1a6d6409 100644 --- a/network/openconnect/openconnect.SlackBuild +++ b/network/openconnect/openconnect.SlackBuild @@ -2,7 +2,7 @@ # Slackware build script for openconnect -# Copyright 2010,2011 Robby Workman, Northport, Alabama, USA +# Copyright 2010-2012 Robby Workman, Northport, Alabama, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,7 +23,7 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. PRGNAM=openconnect -VERSION=${VERSION:-3.15} +VERSION=${VERSION:-3.20} BUILD=${BUILD:-1} TAG=${TAG:-_SBo} @@ -77,11 +77,16 @@ CFLAGS="$SLKCFLAGS" \ --localstatedir=/var \ --mandir=/usr/man \ --docdir=/usr/doc/$PRGNAM-$VERSION \ + --with-vpnc-script=/etc/vpnc/vpnc-script \ --build=$ARCH-slackware-linux make make install DESTDIR=$PKG +mkdir -p $PKG/etc/vpnc +cat $CWD/vpnc-script > $PKG/etc/vpnc/vpnc-script.new +chmod 0755 $PKG/etc/vpnc/vpnc-script.new + gzip -9 $PKG/usr/man/man?/*.? find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ @@ -93,6 +98,7 @@ cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc +cat $CWD/doinst.sh > $PKG/install/doinst.sh cd $PKG /sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz} diff --git a/network/openconnect/openconnect.info b/network/openconnect/openconnect.info index a03fea3658..2f11d0bb4c 100644 --- a/network/openconnect/openconnect.info +++ b/network/openconnect/openconnect.info @@ -1,8 +1,8 @@ PRGNAM="openconnect" -VERSION="3.15" +VERSION="3.20" HOMEPAGE="http://www.infradead.org/openconnect.html" -DOWNLOAD="ftp://ftp.infradead.org/pub/openconnect/openconnect-3.15.tar.gz" -MD5SUM="94245f4bac42a288100becab0b4ca29a" +DOWNLOAD="ftp://ftp.infradead.org/pub/openconnect/openconnect-3.20.tar.gz" +MD5SUM="3ba7c295e05b3053eec84ddc6705d89e" DOWNLOAD_x86_64="" MD5SUM_x86_64="" REQUIRES="" diff --git a/network/openconnect/vpnc-script b/network/openconnect/vpnc-script new file mode 100644 index 0000000000..11cdc3240f --- /dev/null +++ b/network/openconnect/vpnc-script @@ -0,0 +1,749 @@ +#!/bin/sh +# +# Originally part of vpnc source code: +# © 2005-2012 Maurice Massar, Jörg Mayer, Antonio Borneo et al. +# © 2009-2012 David Woodhouse +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +################ +# +# List of parameters passed through environment +#* reason -- why this script was called, one of: pre-init connect disconnect +#* VPNGATEWAY -- vpn gateway address (always present) +#* TUNDEV -- tunnel device (always present) +#* INTERNAL_IP4_ADDRESS -- address (always present) +#* INTERNAL_IP4_MTU -- mtu (often unset) +#* INTERNAL_IP4_NETMASK -- netmask (often unset) +#* INTERNAL_IP4_NETMASKLEN -- netmask length (often unset) +#* INTERNAL_IP4_NETADDR -- address of network (only present if netmask is set) +#* INTERNAL_IP4_DNS -- list of dns servers +#* INTERNAL_IP4_NBNS -- list of wins servers +#* INTERNAL_IP6_ADDRESS -- IPv6 address +#* INTERNAL_IP6_NETMASK -- IPv6 netmask +#* INTERNAL_IP6_DNS -- IPv6 list of dns servers +#* CISCO_DEF_DOMAIN -- default domain name +#* CISCO_BANNER -- banner from server +#* CISCO_SPLIT_INC -- number of networks in split-network-list +#* CISCO_SPLIT_INC_%d_ADDR -- network address +#* CISCO_SPLIT_INC_%d_MASK -- subnet mask (for example: 255.255.255.0) +#* CISCO_SPLIT_INC_%d_MASKLEN -- subnet masklen (for example: 24) +#* CISCO_SPLIT_INC_%d_PROTOCOL -- protocol (often just 0) +#* CISCO_SPLIT_INC_%d_SPORT -- source port (often just 0) +#* CISCO_SPLIT_INC_%d_DPORT -- destination port (often just 0) +#* CISCO_IPV6_SPLIT_INC -- number of networks in IPv6 split-network-list +#* CISCO_IPV6_SPLIT_INC_%d_ADDR -- IPv6 network address +#* CISCO_IPV6_SPLIT_INC_$%d_MASKLEN -- IPv6 subnet masklen + +# FIXMEs: + +# Section A: route handling + +# 1) The 3 values CISCO_SPLIT_INC_%d_PROTOCOL/SPORT/DPORT are currently being ignored +# In order to use them, we'll probably need os specific solutions +# * Linux: iptables -t mangle -I PREROUTING -j ROUTE --oif $TUNDEV +# This would be an *alternative* to changing the routes (and thus 2) and 3) +# shouldn't be relevant at all) +# 2) There are two different functions to set routes: generic routes and the +# default route. Why isn't the defaultroute handled via the generic route case? +# 3) In the split tunnel case, all routes but the default route might get replaced +# without getting restored later. We should explicitely check and save them just +# like the defaultroute +# 4) Replies to a dhcp-server should never be sent into the tunnel + +# Section B: Split DNS handling + +# 1) Maybe dnsmasq can do something like that +# 2) Parse dns packets going out via tunnel and redirect them to original dns-server + +#env | sort +#set -x + +# =========== script (variable) setup ==================================== + +PATH=/sbin:/usr/sbin:$PATH + +OS="`uname -s`" + +HOOKS_DIR=/etc/vpnc +DEFAULT_ROUTE_FILE=/var/run/vpnc/defaultroute +RESOLV_CONF_BACKUP=/var/run/vpnc/resolv.conf-backup +SCRIPTNAME=`basename $0` + +# some systems, eg. Darwin & FreeBSD, prune /var/run on boot +if [ ! -d "/var/run/vpnc" ]; then + mkdir -p /var/run/vpnc + [ -x /sbin/restorecon ] && /sbin/restorecon /var/run/vpnc +fi + +# stupid SunOS: no blubber in /usr/local/bin ... (on stdout) +IPROUTE="`which ip | grep '^/'`" 2> /dev/null + +if ifconfig --help 2>&1 | grep BusyBox > /dev/null; then + ifconfig_syntax_inet="" +else + ifconfig_syntax_inet="inet" +fi + +if [ "$OS" = "Linux" ]; then + ifconfig_syntax_ptp="pointopoint" + route_syntax_gw="gw" + route_syntax_del="del" + route_syntax_netmask="netmask" +else + ifconfig_syntax_ptp="" + route_syntax_gw="" + route_syntax_del="delete" + route_syntax_netmask="-netmask" +fi +if [ "$OS" = "SunOS" ]; then + route_syntax_interface="-interface" + ifconfig_syntax_ptpv6="$INTERNAL_IP6_ADDRESS" +else + route_syntax_interface="" + ifconfig_syntax_ptpv6="" +fi + +if [ -r /etc/openwrt_release ] && [ -n "$OPENWRT_INTERFACE" ]; then + . /etc/functions.sh + include /lib/network + MODIFYRESOLVCONF=modify_resolvconf_openwrt + RESTORERESOLVCONF=restore_resolvconf_openwrt +elif [ -x /sbin/resolvconf ]; then # Optional tool on Debian, Ubuntu, Gentoo + MODIFYRESOLVCONF=modify_resolvconf_manager + RESTORERESOLVCONF=restore_resolvconf_manager +elif [ -x /sbin/netconfig ]; then # tool on Suse after 11.1 + MODIFYRESOLVCONF=modify_resolvconf_suse_netconfig + RESTORERESOLVCONF=restore_resolvconf_suse_netconfig +elif [ -x /sbin/modify_resolvconf ]; then # Mandatory tool on Suse earlier than 11.1 + MODIFYRESOLVCONF=modify_resolvconf_suse + RESTORERESOLVCONF=restore_resolvconf_suse +else # Generic for any OS + MODIFYRESOLVCONF=modify_resolvconf_generic + RESTORERESOLVCONF=restore_resolvconf_generic +fi + + +# =========== script hooks ================================================= + +run_hooks() { + HOOK="$1" + + if [ -d ${HOOKS_DIR}/${HOOK}.d ]; then + for script in ${HOOKS_DIR}/${HOOK}.d/* ; do + [ -f $script ] && . $script + done + fi +} + +# =========== tunnel interface handling ==================================== + +do_ifconfig() { + if [ -n "$INTERNAL_IP4_MTU" ]; then + MTU=$INTERNAL_IP4_MTU + elif [ -n "$IPROUTE" ]; then + MTUDEV=`$IPROUTE route get "$VPNGATEWAY" | sed -ne 's/^.*dev \([a-z0-9]*\).*$/\1/p'` + MTU=`$IPROUTE link show "$MTUDEV" | sed -ne 's/^.*mtu \([[:digit:]]\+\).*$/\1/p'` + if [ -n "$MTU" ]; then + MTU=`expr $MTU - 88` + fi + fi + + if [ -z "$MTU" ]; then + MTU=1412 + fi + + # Point to point interface require a netmask of 255.255.255.255 on some systems + if [ -n "$IPROUTE" ]; then + $IPROUTE link set dev "$TUNDEV" up mtu "$MTU" + $IPROUTE addr add "$INTERNAL_IP4_ADDRESS/32" peer "$INTERNAL_IP4_ADDRESS" dev "$TUNDEV" + else + ifconfig "$TUNDEV" ${ifconfig_syntax_inet} "$INTERNAL_IP4_ADDRESS" $ifconfig_syntax_ptp "$INTERNAL_IP4_ADDRESS" netmask 255.255.255.255 mtu ${MTU} up + fi + + if [ -n "$INTERNAL_IP4_NETMASK" ]; then + set_network_route $INTERNAL_IP4_NETADDR $INTERNAL_IP4_NETMASK $INTERNAL_IP4_NETMASKLEN + fi + + # If the netmask is provided, it contains the address _and_ netmask + if [ -n "$INTERNAL_IP6_ADDRESS" ] && [ -z "$INTERNAL_IP6_NETMASK" ]; then + INTERNAL_IP6_NETMASK="$INTERNAL_IP6_ADDRESS/128" + fi + if [ -n "$INTERNAL_IP6_NETMASK" ]; then + if [ -n "$IPROUTE" ]; then + $IPROUTE -6 addr add $INTERNAL_IP6_NETMASK dev $TUNDEV + else + # Unlike for Legacy IP, we don't specify the dest_address + # here on *BSD. OpenBSD for one will refuse to accept + # incoming packets to that address if we do. + # OpenVPN does the same (gives dest_address for Legacy IP + # but not for IPv6). + # Only Solaris needs it; hence $ifconfig_syntax_ptpv6 + ifconfig "$TUNDEV" inet6 $INTERNAL_IP6_NETMASK $ifconfig_syntax_ptpv6 mtu $MTU up + fi + fi +} + +destroy_tun_device() { + case "$OS" in + NetBSD|FreeBSD) # and probably others... + ifconfig "$TUNDEV" destroy + ;; + esac +} + +# =========== route handling ==================================== + +if [ -n "$IPROUTE" ]; then + fix_ip_get_output () { + sed -e 's/ /\n/g' | \ + sed -ne '1p;/via/{N;p};/dev/{N;p};/src/{N;p};/mtu/{N;p}' + } + + set_vpngateway_route() { + $IPROUTE route add `$IPROUTE route get "$VPNGATEWAY" | fix_ip_get_output` + $IPROUTE route flush cache + } + + del_vpngateway_route() { + $IPROUTE route $route_syntax_del "$VPNGATEWAY" + $IPROUTE route flush cache + } + + set_default_route() { + $IPROUTE route | grep '^default' | fix_ip_get_output > "$DEFAULT_ROUTE_FILE" + $IPROUTE route replace default dev "$TUNDEV" + $IPROUTE route flush cache + } + + set_network_route() { + NETWORK="$1" + NETMASK="$2" + NETMASKLEN="$3" + $IPROUTE route replace "$NETWORK/$NETMASKLEN" dev "$TUNDEV" + $IPROUTE route flush cache + } + + reset_default_route() { + if [ -s "$DEFAULT_ROUTE_FILE" ]; then + $IPROUTE route replace `cat "$DEFAULT_ROUTE_FILE"` + $IPROUTE route flush cache + rm -f -- "$DEFAULT_ROUTE_FILE" + fi + } + + del_network_route() { + NETWORK="$1" + NETMASK="$2" + NETMASKLEN="$3" + $IPROUTE route $route_syntax_del "$NETWORK/$NETMASKLEN" dev "$TUNDEV" + $IPROUTE route flush cache + } + + set_ipv6_default_route() { + # We don't save/restore IPv6 default route; just add a higher-priority one. + $IPROUTE -6 route add default dev "$TUNDEV" metric 1 + $IPROUTE -6 route flush cache + } + + set_ipv6_network_route() { + NETWORK="$1" + NETMASKLEN="$2" + $IPROUTE -6 route replace "$NETWORK/$NETMASKLEN" dev "$TUNDEV" + $IPROUTE route flush cache + } + + reset_ipv6_default_route() { + $IPROUTE -6 route del default dev "$TUNDEV" + $IPROUTE route flush cache + } + + del_ipv6_network_route() { + NETWORK="$1" + NETMASKLEN="$2" + $IPROUTE -6 route del "$NETWORK/$NETMASKLEN" dev "$TUNDEV" + $IPROUTE -6 route flush cache + } +else # use route command + get_default_gw() { + # isn't -n supposed to give --numeric output? + # apperently not... + # Get rid of lines containing IPv6 addresses (':') + netstat -r -n | awk '/:/ { next; } /^(default|0\.0\.0\.0)/ { print $2; }' + } + + set_vpngateway_route() { + route add -host "$VPNGATEWAY" $route_syntax_gw "`get_default_gw`" + } + + del_vpngateway_route() { + route $route_syntax_del -host "$VPNGATEWAY" $route_syntax_gw "`get_default_gw`" + } + + set_default_route() { + DEFAULTGW="`get_default_gw`" + echo "$DEFAULTGW" > "$DEFAULT_ROUTE_FILE" + route $route_syntax_del default $route_syntax_gw "$DEFAULTGW" + route add default $route_syntax_gw "$INTERNAL_IP4_ADDRESS" $route_syntax_interface + } + + set_network_route() { + NETWORK="$1" + NETMASK="$2" + NETMASKLEN="$3" + del_network_route "$NETWORK" "$NETMASK" "$NETMASKLEN" + route add -net "$NETWORK" $route_syntax_netmask "$NETMASK" $route_syntax_gw "$INTERNAL_IP4_ADDRESS" $route_syntax_interface + } + + reset_default_route() { + if [ -s "$DEFAULT_ROUTE_FILE" ]; then + route $route_syntax_del default $route_syntax_gw "`get_default_gw`" $route_syntax_interface + route add default $route_syntax_gw `cat "$DEFAULT_ROUTE_FILE"` + rm -f -- "$DEFAULT_ROUTE_FILE" + fi + } + + del_network_route() { + case "$OS" in + Linux|NetBSD|Darwin|SunOS) # and probably others... + # routes are deleted automatically on device shutdown + return + ;; + esac + NETWORK="$1" + NETMASK="$2" + NETMASKLEN="$3" + route $route_syntax_del -net "$NETWORK" $route_syntax_netmask "$NETMASK" $route_syntax_gw "$INTERNAL_IP4_ADDRESS" + } + + set_ipv6_default_route() { + route add -inet6 default "$INTERNAL_IP6_ADDRESS" $route_syntax_interface + } + + set_ipv6_network_route() { + NETWORK="$1" + NETMASK="$2" + route add -inet6 -net "$NETWORK/$NETMASK" "$INTERNAL_IP6_ADDRESS" $route_syntax_interface + : + } + + reset_ipv6_default_route() { + route $route_syntax_del -inet6 default "$INTERNAL_IP6_ADDRESS" + : + } + + del_ipv6_network_route() { + NETWORK="$1" + NETMASK="$2" + route $route_syntax_del -inet6 "$NETWORK/$NETMASK" "$INTERNAL_IP6_ADDRESS" + : + } + +fi + +# =========== resolv.conf handling ==================================== + +# =========== resolv.conf handling for any OS ========================= + +modify_resolvconf_generic() { + grep '^#@VPNC_GENERATED@' /etc/resolv.conf > /dev/null 2>&1 || cp -- /etc/resolv.conf "$RESOLV_CONF_BACKUP" + NEW_RESOLVCONF="#@VPNC_GENERATED@ -- this file is generated by vpnc +# and will be overwritten by vpnc +# as long as the above mark is intact" + + # Remember the original value of CISCO_DEF_DOMAIN we need it later + CISCO_DEF_DOMAIN_ORIG="$CISCO_DEF_DOMAIN" + # Don't step on INTERNAL_IP4_DNS value, use a temporary variable + INTERNAL_IP4_DNS_TEMP="$INTERNAL_IP4_DNS" + exec 6< "$RESOLV_CONF_BACKUP" + while read LINE <&6 ; do + case "$LINE" in + nameserver*) + if [ -n "$INTERNAL_IP4_DNS_TEMP" ]; then + read ONE_NAMESERVER INTERNAL_IP4_DNS_TEMP <<-EOF + $INTERNAL_IP4_DNS_TEMP +EOF + LINE="nameserver $ONE_NAMESERVER" + else + LINE="" + fi + ;; + search*) + if [ -n "$CISCO_DEF_DOMAIN" ]; then + LINE="$LINE $CISCO_DEF_DOMAIN" + CISCO_DEF_DOMAIN="" + fi + ;; + domain*) + if [ -n "$CISCO_DEF_DOMAIN" ]; then + LINE="domain $CISCO_DEF_DOMAIN" + CISCO_DEF_DOMAIN="" + fi + ;; + esac + NEW_RESOLVCONF="$NEW_RESOLVCONF +$LINE" + done + exec 6<&- + + for i in $INTERNAL_IP4_DNS_TEMP ; do + NEW_RESOLVCONF="$NEW_RESOLVCONF +nameserver $i" + done + if [ -n "$CISCO_DEF_DOMAIN" ]; then + NEW_RESOLVCONF="$NEW_RESOLVCONF +search $CISCO_DEF_DOMAIN" + fi + echo "$NEW_RESOLVCONF" > /etc/resolv.conf + + if [ "$OS" = "Darwin" ]; then + case "`uname -r`" in + # Skip for pre-10.4 systems + 4.*|5.*|6.*|7.*) + ;; + # 10.4 and later require use of scutil for DNS to work properly + *) + OVERRIDE_PRIMARY="" + if [ -n "$CISCO_SPLIT_INC" ]; then + if [ $CISCO_SPLIT_INC -lt 1 ]; then + # Must override for correct default route + # Cannot use multiple DNS matching in this case + OVERRIDE_PRIMARY='d.add OverridePrimary # 1' + fi + fi + # Uncomment the following if/fi pair to use multiple + # DNS matching when available. When multiple DNS matching + # is present, anything reading the /etc/resolv.conf file + # directly will probably not work as intended. + #if [ -z "$CISCO_DEF_DOMAIN_ORIG" ]; then + # Cannot use multiple DNS matching without a domain + OVERRIDE_PRIMARY='d.add OverridePrimary # 1' + #fi + scutil >/dev/null 2>&1 <<-EOF + open + d.init + d.add ServerAddresses * $INTERNAL_IP4_DNS + set State:/Network/Service/$TUNDEV/DNS + d.init + # next line overrides the default gateway and breaks split routing + # d.add Router $INTERNAL_IP4_ADDRESS + d.add Addresses * $INTERNAL_IP4_ADDRESS + d.add SubnetMasks * 255.255.255.255 + d.add InterfaceName $TUNDEV + $OVERRIDE_PRIMARY + set State:/Network/Service/$TUNDEV/IPv4 + close + EOF + if [ -n "$CISCO_DEF_DOMAIN_ORIG" ]; then + scutil >/dev/null 2>&1 <<-EOF + open + get State:/Network/Service/$TUNDEV/DNS + d.add DomainName $CISCO_DEF_DOMAIN_ORIG + d.add SearchDomains * $CISCO_DEF_DOMAIN_ORIG + d.add SupplementalMatchDomains * $CISCO_DEF_DOMAIN_ORIG + set State:/Network/Service/$TUNDEV/DNS + close + EOF + fi + ;; + esac + fi +} + +restore_resolvconf_generic() { + if [ ! -f "$RESOLV_CONF_BACKUP" ]; then + return + fi + grep '^#@VPNC_GENERATED@' /etc/resolv.conf > /dev/null 2>&1 && cat "$RESOLV_CONF_BACKUP" > /etc/resolv.conf + rm -f -- "$RESOLV_CONF_BACKUP" + + if [ "$OS" = "Darwin" ]; then + case "`uname -r`" in + # Skip for pre-10.4 systems + 4.*|5.*|6.*|7.*) + ;; + # 10.4 and later require use of scutil for DNS to work properly + *) + scutil >/dev/null 2>&1 <<-EOF + open + remove State:/Network/Service/$TUNDEV/IPv4 + remove State:/Network/Service/$TUNDEV/DNS + close + EOF + ;; + esac + fi +} +# === resolv.conf handling via /sbin/netconfig (Suse 11.1) ===================== + +# Suse provides a script that modifies resolv.conf. Use it because it will +# restart/reload all other services that care about it (e.g. lwresd). [unclear if this is still true, but probably --mlk] + +modify_resolvconf_suse_netconfig() +{ + /sbin/netconfig modify -s vpnc -i "$TUNDEV" <<-EOF + INTERFACE='$TUNDEV' + DNSSERVERS='$INTERNAL_IP4_DNS' + DNSDOMAIN='$CISCO_DEF_DOMAIN' + EOF +} +# Restore resolv.conf to old contents on Suse +restore_resolvconf_suse_netconfig() +{ + /sbin/netconfig remove -s vpnc -i "$TUNDEV" +} + +# === resolv.conf handling via /sbin/modify_resolvconf (Suse) ===================== + +# Suse provides a script that modifies resolv.conf. Use it because it will +# restart/reload all other services that care about it (e.g. lwresd). + +modify_resolvconf_suse() +{ + FULL_SCRIPTNAME=`readlink -f $0` + RESOLV_OPTS='' + test -n "$INTERNAL_IP4_DNS" && RESOLV_OPTS="-n \"$INTERNAL_IP4_DNS\"" + test -n "$CISCO_DEF_DOMAIN" && RESOLV_OPTS="$RESOLV_OPTS -d $CISCO_DEF_DOMAIN" + test -n "$RESOLV_OPTS" && eval /sbin/modify_resolvconf modify -s vpnc -p $SCRIPTNAME -f $FULL_SCRIPTNAME -e $TUNDEV $RESOLV_OPTS -t \"This file was created by $SCRIPTNAME\" +} + +# Restore resolv.conf to old contents on Suse +restore_resolvconf_suse() +{ + FULL_SCRIPTNAME=`readlink -f $0` + /sbin/modify_resolvconf restore -s vpnc -p $SCRIPTNAME -f $FULL_SCRIPTNAME -e $TUNDEV +} + +# === resolv.conf handling via UCI (OpenWRT) ========= + +modify_resolvconf_openwrt() { + add_dns $OPENWRT_INTERFACE $INTERNAL_IP4_DNS +} + +restore_resolvconf_openwrt() { + remove_dns $OPENWRT_INTERFACE +} +# === resolv.conf handling via /sbin/resolvconf (Debian, Ubuntu, Gentoo)) ========= + +modify_resolvconf_manager() { + NEW_RESOLVCONF="" + for i in $INTERNAL_IP4_DNS; do + NEW_RESOLVCONF="$NEW_RESOLVCONF +nameserver $i" + done + if [ -n "$CISCO_DEF_DOMAIN" ]; then + NEW_RESOLVCONF="$NEW_RESOLVCONF +domain $CISCO_DEF_DOMAIN" + fi + echo "$NEW_RESOLVCONF" | /sbin/resolvconf -a $TUNDEV +} + +restore_resolvconf_manager() { + /sbin/resolvconf -d $TUNDEV +} + +# ========= Toplevel state handling ======================================= + +kernel_is_2_6_or_above() { + case `uname -r` in + 1.*|2.[012345]*) + return 1 + ;; + *) + return 0 + ;; + esac +} + +do_pre_init() { + if [ "$OS" = "Linux" ]; then + if (exec 6<> /dev/net/tun) > /dev/null 2>&1 ; then + : + else # can't open /dev/net/tun + test -e /proc/sys/kernel/modprobe && `cat /proc/sys/kernel/modprobe` tun 2>/dev/null + # fix for broken devfs in kernel 2.6.x + if [ "`readlink /dev/net/tun`" = misc/net/tun \ + -a ! -e /dev/net/misc/net/tun -a -e /dev/misc/net/tun ] ; then + ln -sf /dev/misc/net/tun /dev/net/tun + fi + # make sure tun device exists + if [ ! -e /dev/net/tun ]; then + mkdir -p /dev/net + mknod -m 0640 /dev/net/tun c 10 200 + [ -x /sbin/restorecon ] && /sbin/restorecon /dev/net/tun + fi + # workaround for a possible latency caused by udev, sleep max. 10s + if kernel_is_2_6_or_above ; then + for x in `seq 100` ; do + (exec 6<> /dev/net/tun) > /dev/null 2>&1 && break; + sleep 0.1 + done + fi + fi + elif [ "$OS" = "FreeBSD" ]; then + if [ ! -e /dev/tun ]; then + kldload if_tun + fi + elif [ "$OS" = "GNU/kFreeBSD" ]; then + if [ ! -e /dev/tun ]; then + kldload if_tun + fi + elif [ "$OS" = "NetBSD" ]; then + : + elif [ "$OS" = "OpenBSD" ]; then + : + elif [ "$OS" = "SunOS" ]; then + : + elif [ "$OS" = "Darwin" ]; then + : + fi +} + +do_connect() { + if [ -n "$CISCO_BANNER" ]; then + echo "Connect Banner:" + echo "$CISCO_BANNER" | while read LINE ; do echo "|" "$LINE" ; done + echo + fi + + set_vpngateway_route + do_ifconfig + if [ -n "$CISCO_SPLIT_INC" ]; then + i=0 + while [ $i -lt $CISCO_SPLIT_INC ] ; do + eval NETWORK="\${CISCO_SPLIT_INC_${i}_ADDR}" + eval NETMASK="\${CISCO_SPLIT_INC_${i}_MASK}" + eval NETMASKLEN="\${CISCO_SPLIT_INC_${i}_MASKLEN}" + if [ $NETWORK != "0.0.0.0" ]; then + set_network_route "$NETWORK" "$NETMASK" "$NETMASKLEN" + else + set_default_route + fi + i=`expr $i + 1` + done + for i in $INTERNAL_IP4_DNS ; do + echo "$i" | grep : >/dev/null || \ + set_network_route "$i" "255.255.255.255" "32" + done + elif [ -n "$INTERNAL_IP4_ADDRESS" ]; then + set_default_route + fi + if [ -n "$CISCO_IPV6_SPLIT_INC" ]; then + i=0 + while [ $i -lt $CISCO_IPV6_SPLIT_INC ] ; do + eval NETWORK="\${CISCO_IPV6_SPLIT_INC_${i}_ADDR}" + eval NETMASKLEN="\${CISCO_IPV6_SPLIT_INC_${i}_MASKLEN}" + if [ $NETMASKLEN -lt 128 ]; then + set_ipv6_network_route "$NETWORK" "$NETMASKLEN" + else + set_ipv6_default_route + fi + i=`expr $i + 1` + done + for i in $INTERNAL_IP4_DNS ; do + if echo "$i" | grep : >/dev/null; then + set_ipv6_network_route "$i" "128" + fi + done + elif [ -n "$INTERNAL_IP6_NETMASK" -o -n "$INTERNAL_IP6_ADDRESS" ]; then + set_ipv6_default_route + fi + + if [ -n "$INTERNAL_IP4_DNS" ]; then + $MODIFYRESOLVCONF + fi +} + +do_disconnect() { + if [ -n "$CISCO_SPLIT_INC" ]; then + i=0 + while [ $i -lt $CISCO_SPLIT_INC ] ; do + eval NETWORK="\${CISCO_SPLIT_INC_${i}_ADDR}" + eval NETMASK="\${CISCO_SPLIT_INC_${i}_MASK}" + eval NETMASKLEN="\${CISCO_SPLIT_INC_${i}_MASKLEN}" + if [ $NETWORK != "0.0.0.0" ]; then + # FIXME: This doesn't restore previously overwritten + # routes. + del_network_route "$NETWORK" "$NETMASK" "$NETMASKLEN" + else + reset_default_route + fi + i=`expr $i + 1` + done + for i in $INTERNAL_IP4_DNS ; do + del_network_route "$i" "255.255.255.255" "32" + done + else + reset_default_route + fi + if [ -n "$CISCO_IPV6_SPLIT_INC" ]; then + i=0 + while [ $i -lt $CISCO_IPV6_SPLIT_INC ] ; do + eval NETWORK="\${CISCO_IPV6_SPLIT_INC_${i}_ADDR}" + eval NETMASKLEN="\${CISCO_IPV6_SPLIT_INC_${i}_MASKLEN}" + if [ $NETMASKLEN -eq 0 ]; then + reset_ipv6_default_route + else + del_ipv6_network_route "$NETWORK" "$NETMASKLEN" + fi + i=`expr $i + 1` + done + for i in $INTERNAL_IP6_DNS ; do + del_ipv6_network_route "$i" "128" + done + elif [ -n "$INTERNAL_IP6_NETMASK" -o -n "$INTERNAL_IP6_ADDRESS" ]; then + reset_ipv6_default_route + fi + + del_vpngateway_route + + if [ -n "$INTERNAL_IP4_DNS" ]; then + $RESTORERESOLVCONF + fi + destroy_tun_device +} + +#### Main + +if [ -z "$reason" ]; then + echo "this script must be called from vpnc" 1>&2 + exit 1 +fi + +case "$reason" in + pre-init) + run_hooks pre-init + do_pre_init + ;; + connect) + run_hooks connect + do_connect + run_hooks post-connect + ;; + disconnect) + run_hooks disconnect + do_disconnect + run_hooks post-disconnect + ;; + reconnect) + run_hooks reconnect + ;; + *) + echo "unknown reason '$reason'. Maybe vpnc-script is out of date" 1>&2 + exit 1 + ;; +esac + +exit 0 -- cgit v1.2.3