6 files changed, 297 insertions, 0 deletions
diff --git a/system/webmin/README b/system/webmin/README
new file mode 100644
index 0000000000..636b2762d5
--- /dev/null
+++ b/system/webmin/README
@@ -0,0 +1,28 @@
+Webmin is a web-based interface for system administration for Unix.
+Using any modern web browser, you can setup user accounts, Apache,
+DNS, file sharing, and much more.  Webmin removes the need to manually
+edit Unix configuration files like /etc/passwd and lets you manage
+a system from the console or remotely.
+
+Webmin consists of a simple web server and a number of CGI programs
+which directly update system files like /etc/inetd.conf and /etc/passwd.
+The web server and all CGI programs are written in Perl version 5, and use
+only the standard perl modules. 
+
+Some modules will require manual configuration from within webmin.
+Login with root and root's password.
+
+If you need to start webmin at boot.
+The recommended way is to add the following to your /etc/rc.d/rc.local
+script and make sure rc.webmin has executable permissions set:
+	if [ -x /etc/rc.d/rc.webmin ]; then
+		/etc/rc.d/rc.webmin start
+	fi
+After the webmin service is started, point your web browser to 
+http://localhost:10000 and login as root to use webmin.
+
+Note that if you upgrade from a older version of this SlackBuild
+you __MUST__ use the new /etc/rc.d/rc.webmin file.
+Also, if you are upgrading, you need to backup your /etc/webmin directory.
+All of the config files will be deleted by this upgrade - however, that 
+problem is solved in future upgrades, so it won't be an issue again.
diff --git a/system/webmin/doinst.sh b/system/webmin/doinst.sh
new file mode 100644
index 0000000000..765079d88b
--- /dev/null
+++ b/system/webmin/doinst.sh
@@ -0,0 +1,24 @@
+#!/bin/sh
+
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+# Keep same perms on rc.webmin.new:
+if [ -e etc/rc.d/rc.webmin ]; then
+  cp -a etc/rc.d/rc.webmin etc/rc.d/rc.webmin.new.incoming
+  cat etc/rc.d/rc.webmin.new > etc/rc.d/rc.webmin.new.incoming
+  mv etc/rc.d/rc.webmin.new.incoming etc/rc.d/rc.webmin.new
+fi
+
+# Signal the startup script to do some post install configuration  
+touch etc/webmin/FIRSTRUN
diff --git a/system/webmin/rc.webmin b/system/webmin/rc.webmin
new file mode 100644
index 0000000000..72067fe843
--- /dev/null
+++ b/system/webmin/rc.webmin
@@ -0,0 +1,81 @@
+#!/bin/sh
+# Description: Start or stop the Webmin server
+
+start=/etc/webmin/start
+stop=/etc/webmin/stop
+lockfile=/var/lock/subsys/webmin
+confFile=/etc/webmin/miniserv.conf
+pidFile=$(grep "^pidfile=" $confFile | sed -e 's/pidfile=//g')
+
+pkg_postinst () {
+	echo "Running postinstall scripts .."
+	
+	local crypt=$(grep "^root:" /etc/shadow | cut -f 2 -d :)
+	crypt=${crypt//\\/\\\\}
+	crypt=${crypt//\//\\\/}
+	sed -i "s/root:XXX/root:${crypt}/" /etc/webmin/miniserv.users
+	
+	if [ -d /usr/libexec/webmin ]; then
+		cd /usr/libexec/webmin
+		WEBMIN_CONFIG=/etc/webmin WEBMIN_VAR=/var/log/webmin /usr/libexec/webmin/run-postinstalls.pl
+	fi
+	
+	echo "done"
+}
+
+case "$1" in
+'start')
+	if [ -e /etc/webmin/FIRSTRUN ]; then
+		pkg_postinst
+		rm -f /etc/webmin/FIRSTRUN
+	fi
+	$start >/dev/null 2>&1 </dev/null
+	RETVAL=$?
+	if [ "$RETVAL" = "0" ]; then
+		touch $lockfile >/dev/null 2>&1
+		echo "Webmin Started"
+	fi
+	;;
+'stop')
+	$stop
+	RETVAL=$?
+	if [ "$RETVAL" = "0" ]; then
+		rm -f $lockfile
+	fi
+	pidfile=`grep "^pidfile=" $confFile | sed -e 's/pidfile=//g'`
+	if [ "$pidfile" = "" ]; then
+		pidfile=$pidFile
+	fi
+	echo "Webmin Stopped"
+	rm -f $pidfile
+	;;
+'status')
+	pidfile=`grep "^pidfile=" $confFile | sed -e 's/pidfile=//g'`
+	if [ "$pidfile" = "" ]; then
+		pidfile=$pidFile
+	fi
+	if [ -s $pidfile ]; then
+		pid=`cat $pidfile`
+		kill -0 $pid >/dev/null 2>&1
+		if [ "$?" = "0" ]; then
+			echo "Webmin (pid $pid) is running"
+			RETVAL=0
+		else
+			echo "Webmin is stopped"
+			RETVAL=1
+		fi
+	else
+		echo "Webmin is stopped"
+		RETVAL=1
+	fi
+	;;
+'restart')
+	$stop ; $start
+	RETVAL=$?
+	;;
+*)
+	echo "Usage: $0 { start | stop | restart }"
+	RETVAL=1
+	;;
+esac
+exit $RETVAL
diff --git a/system/webmin/slack-desc b/system/webmin/slack-desc
new file mode 100644
index 0000000000..29bc0cd2bc
--- /dev/null
+++ b/system/webmin/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+webmin: webmin (web-based interface for system administration)
+webmin:
+webmin: Webmin is a web-based interface for system administration for Unix.
+webmin: You can initially login in at http://localhost:10000
+webmin: with user root and root's password.
+webmin: 
+webmin: Homepage: http://www.webmin.com
+webmin:
+webmin:
+webmin:
+webmin:
diff --git a/system/webmin/webmin.SlackBuild b/system/webmin/webmin.SlackBuild
new file mode 100644
index 0000000000..377960d85b
--- /dev/null
+++ b/system/webmin/webmin.SlackBuild
@@ -0,0 +1,137 @@
+#!/bin/sh
+
+# Slackware build script for Webmin http://www.webmin.com
+
+# Copyright 2006-2007  David Somero (dsomero@hotmail.com)
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=webmin
+VERSION=1.400
+ARCH=noarch
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=${TMP}/package-${PRGNAM}
+OUTPUT=${OUTPUT:-/tmp}
+
+# Check if webmin is running - if so, the build will fail...
+if [ -e /etc/webmin/miniserv.conf ]; then
+  PIDFILE=$(grep "^pidfile=" /etc/webmin/miniserv.conf | sed -e 's/pidfile=//g')
+  if [ -e $PIDFILE ]; then
+    echo "Webmin is running or a stale pid file exists."
+    echo "Stop webmin and/or remove $PIDFILE"
+    exit 1
+  fi
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.*z*
+cd $PRGNAM-$VERSION
+chown -R root:root .
+chmod -R u+w,go+r-w,a-s .
+
+rm -f mount/{freebsd,openbsd,macos}-mounts* 
+
+( find . -name '*.cgi' ; find . -name '*.pl' ) | perl perlpath.pl /usr/bin/perl -
+
+install -d -m 0755 $PKG/usr/libexec/webmin
+install -d -m 0755 $PKG/var
+install -d -m 0755 $PKG/etc/rc.d/
+install -d -m 0755 $PKG/etc/webmin/
+install -d -m 0755 $PKG/var/log/webmin/
+install -m 0644 $CWD/rc.webmin $PKG/etc/rc.d/rc.webmin
+cp -rp * $PKG/usr/libexec/webmin
+echo "slackware" > $PKG/usr/libexec/webmin/install-type
+echo "/usr/libexec/webmin" > $PKG/usr/libexec/webmin/install-dir
+
+config_dir=$PKG/etc/webmin
+var_dir=$PKG/var/log/webmin
+perl=/usr/bin/perl
+autoos=1
+port=10000
+login=root
+crypt="XXX"
+host=$(hostname)
+ssl=0
+atboot=0
+nostart=1
+nochown=1
+autothird=1
+nouninstall=1
+noperlpath=1
+nopostinstall=1
+
+export config_dir var_dir perl autoos port login crypt host ssl atboot nostart nochown autothird nouninstall noperlpath nopostinstall 
+
+cd $PKG/usr/libexec/webmin
+  ./setup.sh 2>&1 
+cd -
+
+# Fixup the package files to use their real locations
+sed -i -e 's:^pidfile=.*$:pidfile=/var/run/webmin.pid:' $PKG/etc/webmin/miniserv.conf
+find $PKG -type f | xargs sed -i -e "s:$PKG::g"
+
+# Remove some stuff we don't need
+rm -rf $PKG/usr/libexec/webmin/acl/Authen-SolarisRBAC-0.1
+rm -f $PKG/usr/libexec/webmin/acl/Authen-SolarisRBAC-0.1.tar.gz
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a LICENCE* README ${CWD}/webmin.SlackBuild $PKG/usr/doc/$PRGNAM-$VERSION
+chown -R root:root $PKG/usr/doc/$PRGNAM-$VERSION
+chmod 644 $PKG/usr/doc/$PRGNAM-$VERSION/*
+
+mkdir -p $PKG/install 
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+# Find config files and add the .new.
+# Used by the next block of code.
+get_config_files() {
+  for i in $(ls -1 $1); do
+    if [ -d "$1/$i" ]; then
+      get_config_files "$1/$i"
+    else
+      echo -n "$1/$i.new " | sed -e "s/^$(echo $PKG | sed -e 's/\//\\\//g')\///g"
+      mv "$1/$i" "$1/$i.new"
+    fi
+  done
+}
+
+# Finish the doinst.sh by adding the .new file list and config loop
+if [ -e $PKG/etc ]; then 
+  etc_files=$(get_config_files $PKG/etc)
+
+cat <<DOINST >> $PKG/install/doinst.sh
+for FILE in $etc_files
+do
+  config \$FILE
+done
+DOINST
+fi
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz
diff --git a/system/webmin/webmin.info b/system/webmin/webmin.info
new file mode 100644
index 0000000000..01fc7a2496
--- /dev/null
+++ b/system/webmin/webmin.info
@@ -0,0 +1,8 @@
+PRGNAM="webmin"
+VERSION="1.400"
+HOMEPAGE="http://www.webmin.com/"
+DOWNLOAD="http://downloads.sourceforge.net/webadmin/webmin-1.400.tar.gz"
+MD5SUM="c52399bc70f0277d69fb128930e09fd0"
+MAINTAINER="David Somero"
+EMAIL="dsomero@hotmail.com"
+APPROVED="rworkman"