summaryrefslogtreecommitdiff
path: root/system
diff options
context:
space:
mode:
Diffstat (limited to 'system')
-rw-r--r--system/pm-utils/README9
-rw-r--r--system/pm-utils/README.SLACKWARE114
-rw-r--r--system/pm-utils/patches/99video.diff20
-rw-r--r--system/pm-utils/patches/pm-utils-functions.in.patch25
-rw-r--r--system/pm-utils/pm-utils.SlackBuild113
-rw-r--r--system/pm-utils/pm-utils.info8
-rw-r--r--system/pm-utils/slack-desc19
7 files changed, 308 insertions, 0 deletions
diff --git a/system/pm-utils/README b/system/pm-utils/README
new file mode 100644
index 0000000000..7a11128b14
--- /dev/null
+++ b/system/pm-utils/README
@@ -0,0 +1,9 @@
+The pm-utils package provides simple shell command line tools
+to suspend and hibernate computers that can be used to run
+vendor or distro supplied scripts on suspend and resume.
+
+See the installed documentation, especially README.SLACKWARE,
+for usage hints and such.
+
+vbetool and radeontool are not required, but you should probably
+install them just in case your hardware needs them.
diff --git a/system/pm-utils/README.SLACKWARE b/system/pm-utils/README.SLACKWARE
new file mode 100644
index 0000000000..a69e6f5c86
--- /dev/null
+++ b/system/pm-utils/README.SLACKWARE
@@ -0,0 +1,114 @@
+README.SLACKWARE
+20081130 - rworkman@slackware.com
+
+===============================================================================
+PLEASE READ THIS ENTIRE FILE BEFORE REPORTING PROBLEMS OR ASKING FOR HELP!
+===============================================================================
+
+One of these routines should tell you whether any of the operations
+are supported by your current kernel/userspace at all:
+
+ for i in hibernate suspend suspend-hybrid ; do
+ pm-is-supported --$i \
+ && echo "$i is supported" \
+ || echo "$i is not supported" ;
+ done
+
+ *OR*
+
+ cat /sys/power/state
+
+Assuming they are supported, running "pm-suspend" as root should do a suspend
+to ram, and "pm-hibernate" should suspend to disk. Note that you must have a
+swap partition (or file, but partition is easier) which is large enough
+(2x ram is good here) and the relevant initrd lines and such for this to work.
+If you're not familiar with all of that, don't test pm-hibernate.
+I don't have hardware which supports suspend-hybrid, so I have no idea if/how
+it works at all.
+
+Here's the short version of using suspend to disk:
+
+Stanza in /etc/lilo.conf should look something like this:
+ image = /boot/vmlinuz-generic-smp-2.6.26.7-smp
+ initrd = /boot/initrd.gz
+ append = "resume=/dev/hda2"
+ root = /dev/hda1
+ label = Slackware
+ read-only
+
+/etc/mkinitrd.conf should look something like this:
+ MODULE_LIST="jfs"
+ ROOTDEV="/dev/hda1"
+ ROOTFS="jfs"
+ RESUMEDEV="/dev/hda2"
+
+mkinitrd command invocation would be this:
+ mkinitrd -c -k 2.6.26.7-smp -F
+
+All of the above assumes at least a cursory understanding of what those
+commands and parameters do. If it's not clear, don't attempt it on a
+system that you can't easily reinstall without concern.
+
+==============================================================================
+
+If it works for you, and/or you want to automate it a bit, you'll find
+some sample acpi event declarations and scripts here:
+ http://rlworkman.net/conf/acpi/
+A better option is to use a power manager daemon, but unless you happen to be
+running gnome or one of the pre-release xfce-4.6 builds, that's not an option.
+I'm not sure whether kde's klaptop supports pm-utils or not, so feedback in
+this area is encouraged.
+
+==============================================================================
+
+If it doesn't work by default for you, consider having a look at
+ http://people.freedesktop.org/~hughsient/quirk/quirk-suspend-index.html
+for some debugging hints. Pay particular attention to this page:
+ http://people.freedesktop.org/~hughsient/quirk/quirk-suspend-try.html
+If you are able to get your machine to suspend/resume correctly by passing
+additional quirks on the command line, then I would like to know about it so
+that upstream hal-info can get the correct information to use. Please email
+the make/model and other relevant information about your machine along with
+the full output of "lshal" and "lspci" attached, and what extra quirks you
+needed to add for successful suspend/resume to rworkman@slackware.com
+
+==============================================================================
+
+If you need the system to do certain operations before going to sleep and
+then undo them (or perhaps do something new) when waking back up, pm-utils
+supports something called "hooks." The hooks installed by packages (not only
+pm-utils itself) should be in /usr/lib/pm-utils/sleep.d/, while any hooks
+installed by the local system administrator (e.g. things that are only an
+issue on that one machine) should be in /etc/pm/sleep.d/.
+
+Looking at some of the existing hooks should give you a decent idea of their
+capabilities; as a head start, the functions used in the hooks are declared
+in /usr/lib/pm-utils/functions, which is inherited elsewhere by
+/usr/lib/pm-utils/pm-functions
+
+One way to contribute to pm-utils indirectly is by writing and sending any
+needed hooks scripts to upstream projects; as an example, the hook that
+ships with wicd was contributed by me. Ideally, the pm-utils package should
+have a very minimum number of hooks shipped with it, as they should ship with
+the package to which the hook pertains; for example, the grub package would
+ship its own hook.
+
+==============================================================================
+
+We have removed several hooks from the default upstream package in response
+to a discussion on the pm-utils mailing list; see the source directory of
+pm-utils for details, and if you happen to need any of the removed hooks,
+most of them are in /usr/doc/pm-utils-*/extra_hooks/
+
+==============================================================================
+
+KNOWN BUGS
+
+If your alsa drivers don't correctly save and restore state across a sleep /
+resume cycle (due to a buggy driver), then you will need to add the drivers
+to a custom file named /etc/pm/config.d/defaults (create the file if it does
+not exist already) in a variable named "SUSPEND_MODULES" - see the file at
+/usr/lib/pm-utils/defaults for proper format.
+
+==============================================================================
+
diff --git a/system/pm-utils/patches/99video.diff b/system/pm-utils/patches/99video.diff
new file mode 100644
index 0000000000..f38b001117
--- /dev/null
+++ b/system/pm-utils/patches/99video.diff
@@ -0,0 +1,20 @@
+--- a/pm/sleep.d/99video
++++ b/pm/sleep.d/99video
+@@ -144,7 +144,7 @@ suspend_video()
+ local acpi_flag=0
+ quirk "${QUIRK_S3_BIOS}" && acpi_flag=$(($acpi_flag + 1))
+ quirk "${QUIRK_S3_MODE}" && acpi_flag=$(($acpi_flag + 2))
+- [ 0 -ne $acpi_flag ] && sysctl -w kernel.acpi_video_flags=$acpi_flag
++ sysctl -w kernel.acpi_video_flags=$acpi_flag
+
+ quirk "${QUIRK_NOFB}" && die_if_framebuffer
+ quirk "${QUIRK_VBESTATE_RESTORE}" && vbe_savestate
+@@ -166,8 +166,6 @@ resume_video()
+ quirk "${QUIRK_RADEON_OFF}" && radeon_on
+ quirk "${QUIRK_DPMS_ON}" && vbe dpms on
+ quirk "${QUIRK_RESET_BRIGHTNESS}" && reset_brightness
+- # always reset acpi_video_flag -- makes quirk testing more reliable.
+- sysctl -w kernel.acpi_video_flags=0
+ return 0 # avoid spurious hook exit failure message.
+ }
+
diff --git a/system/pm-utils/patches/pm-utils-functions.in.patch b/system/pm-utils/patches/pm-utils-functions.in.patch
new file mode 100644
index 0000000000..834fe6599c
--- /dev/null
+++ b/system/pm-utils/patches/pm-utils-functions.in.patch
@@ -0,0 +1,25 @@
+diff -Nur pm-utils-1.2.2.1.orig/pm/functions.in pm-utils-1.2.2.1/pm/functions.in
+--- pm-utils-1.2.2.1.orig/pm/functions.in 2008-10-05 20:49:09.000000000 -0500
++++ pm-utils-1.2.2.1/pm/functions.in 2008-10-24 14:49:56.911161730 -0500
+@@ -124,15 +124,19 @@
+ done
+ }
+
+-# Service management is sysv dependent.
+-# TODO: modularize this to make it work with other init systems.
+ if ! command_exists service; then
+ service()
+ {
++ # Pure SysV init
+ if [ -x "/etc/init.d/$1" ]; then
+ svc="$1"
+ shift
+ "/etc/init.d/$svc" "$@"
++ # Slackware's BSD-style SysV init
++ elif [ -x "/etc/rc.d/rc.${1}" ]; then
++ svc="$1"
++ shift
++ "/etc/rc.d/rc.${1}" "$@"
+ else
+ log "${1}: unrecognized service"
+ return 1
diff --git a/system/pm-utils/pm-utils.SlackBuild b/system/pm-utils/pm-utils.SlackBuild
new file mode 100644
index 0000000000..c92c8c3567
--- /dev/null
+++ b/system/pm-utils/pm-utils.SlackBuild
@@ -0,0 +1,113 @@
+#!/bin/sh
+
+# Slackware build script for pm-utils
+
+# Copyright 2008 Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=pm-utils
+VERSION=1.2.2.1
+ARCH=${ARCH:-i486}
+BUILD=${BUILD:-2}
+TAG=${TAG:-_SBo}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+ SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+elif [ "$ARCH" = "s390" ]; then
+ SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+ SLKCFLAGS="-O2 -fPIC"
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+# Fix up some SysV init hardcoding
+patch -p1 < $CWD/patches/pm-utils-functions.in.patch
+
+# Fix a bug where acpi video flags aren't properly reset after a resume,
+# causing subsequent resumes to fail
+patch -p1 < $CWD/patches/99video.diff
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+ --prefix=/usr \
+ --sysconfdir=/etc \
+ --docdir=/usr/doc/$PRGNAM-$VERSION \
+ --mandir=/usr/man \
+ --build=$ARCH-slackware-linux
+
+make
+make install DESTDIR=$PKG
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+( cd $PKG/usr/man || exit 1
+ find . -type f -exec gzip -9 {} \;
+ for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
+)
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a AUTHORS COPYING ChangeLog INSTALL NEWS README* TODO \
+ $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+cat $CWD/README.SLACKWARE > $PKG/usr/doc/$PRGNAM-$VERSION/README.SLACKWARE
+
+# According to this thread, these hooks should not be needed:
+# http://lists.freedesktop.org/archives/pm-utils/2008-November/001753.html
+# ##### MOVED HOOKS
+# 1. 50ntpd: ntp gracefully handles disappearing net on its own
+# 2. 55battery: hal >0.5.10 handles this on its own
+# 3. 90clock: Most systems should keep the hwclock in sync over a suspend /
+# resume cycle, and since this hook is a severe time waster otherwise,
+# we'll kill it.
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/extra_hooks
+mv $PKG/usr/lib/pm-utils/sleep.d/{50ntpd,55battery,90clock} \
+ $PKG/usr/doc/$PRGNAM-$VERSION/extra_hooks
+# ##### REMOVED HOOKS
+# 4. 65alsa: According to the alsa devs, this hook is useless. Correct
+# way to workaround buggy alsa drivers is documented in README.SLACKWARE
+# http://lists.freedesktop.org/archives/pm-utils/2008-November/001808.html
+# 5. 94cpufreq: all cpufreq governors are "sane" now, so this isn't needed
+rm -f $PKG/usr/lib/pm-utils/sleep.d/{65alsa,94cpufreq}
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz
diff --git a/system/pm-utils/pm-utils.info b/system/pm-utils/pm-utils.info
new file mode 100644
index 0000000000..e1160f734a
--- /dev/null
+++ b/system/pm-utils/pm-utils.info
@@ -0,0 +1,8 @@
+PRGNAM="pm-utils"
+VERSION="1.2.2.1"
+HOMEPAGE="http://pm-utils.freedesktop.org/"
+DOWNLOAD="http://pm-utils.freedesktop.org/releases/pm-utils-1.2.2.1.tar.gz"
+MD5SUM="dcc7bde623d0bae207158e153b7394a8"
+MAINTAINER="Robby Workman"
+EMAIL="rw@rlworkman.net"
+APPROVED="dsomero"
diff --git a/system/pm-utils/slack-desc b/system/pm-utils/slack-desc
new file mode 100644
index 0000000000..8aed9ddbd6
--- /dev/null
+++ b/system/pm-utils/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler----------------------------------------------------|
+pm-utils: pm-utils (Power Management Utilities)
+pm-utils:
+pm-utils: The pm-utils package provides simple shell command line tools
+pm-utils: to suspend and hibernate computers that can be used to run
+pm-utils: vendor or distro supplied scripts on suspend and resume.
+pm-utils:
+pm-utils: Homepage: http://pm-utils.freedesktop.org
+pm-utils:
+pm-utils:
+pm-utils:
+pm-utils: