7 files changed, 0 insertions, 308 deletions
diff --git a/system/pm-utils/README b/system/pm-utils/README
deleted file mode 100644
index 7a11128b14..0000000000
--- a/system/pm-utils/README
+++ /dev/null
@@ -1,9 +0,0 @@
-The pm-utils package provides simple shell command line tools
-to suspend and hibernate computers that can be used to run 
-vendor or distro supplied scripts on suspend and resume.
-
-See the installed documentation, especially README.SLACKWARE,
-for usage hints and such.
-
-vbetool and radeontool are not required, but you should probably
-install them just in case your hardware needs them.
diff --git a/system/pm-utils/README.SLACKWARE b/system/pm-utils/README.SLACKWARE
deleted file mode 100644
index a69e6f5c86..0000000000
--- a/system/pm-utils/README.SLACKWARE
+++ /dev/null
@@ -1,114 +0,0 @@
-README.SLACKWARE
-20081130 - rworkman@slackware.com
-
-===============================================================================
-PLEASE READ THIS ENTIRE FILE BEFORE REPORTING PROBLEMS OR ASKING FOR HELP!
-===============================================================================
-
-One of these routines should tell you whether any of the operations
-are supported by your current kernel/userspace at all:
-
-  for i in hibernate suspend suspend-hybrid ; do
-    pm-is-supported --$i \
-      && echo "$i is supported" \
-      || echo "$i is not supported" ;
-  done
-
-  *OR*
-
-  cat /sys/power/state
-
-Assuming they are supported, running "pm-suspend" as root should do a suspend
-to ram, and "pm-hibernate" should suspend to disk. Note that you must have a 
-swap partition (or file, but partition is easier) which is large enough 
-(2x ram is good here) and the relevant initrd lines and such for this to work. 
-If you're not familiar with all of that, don't test pm-hibernate.
-I don't have hardware which supports suspend-hybrid, so I have no idea if/how
-it works at all.
-
-Here's the short version of using suspend to disk:
-
-Stanza in /etc/lilo.conf should look something like this:
-  image = /boot/vmlinuz-generic-smp-2.6.26.7-smp
-    initrd = /boot/initrd.gz
-    append = "resume=/dev/hda2"
-    root = /dev/hda1
-    label = Slackware
-    read-only
-
-/etc/mkinitrd.conf should look something like this:
-  MODULE_LIST="jfs"
-  ROOTDEV="/dev/hda1"
-  ROOTFS="jfs"
-  RESUMEDEV="/dev/hda2"
-
-mkinitrd command invocation would be this:
-  mkinitrd -c -k 2.6.26.7-smp -F
-
-All of the above assumes at least a cursory understanding of what those
-commands and parameters do. If it's not clear, don't attempt it on a
-system that you can't easily reinstall without concern.
-
-==============================================================================
-
-If it works for you, and/or you want to automate it a bit, you'll find
-some sample acpi event declarations and scripts here:
-  http://rlworkman.net/conf/acpi/
-A better option is to use a power manager daemon, but unless you happen to be
-running gnome or one of the pre-release xfce-4.6 builds, that's not an option.
-I'm not sure whether kde's klaptop supports pm-utils or not, so feedback in
-this area is encouraged.
-
-==============================================================================
-
-If it doesn't work by default for you, consider having a look at
-  http://people.freedesktop.org/~hughsient/quirk/quirk-suspend-index.html
-for some debugging hints.  Pay particular attention to this page:
-  http://people.freedesktop.org/~hughsient/quirk/quirk-suspend-try.html
-If you are able to get your machine to suspend/resume correctly by passing
-additional quirks on the command line, then I would like to know about it so
-that upstream hal-info can get the correct information to use.  Please email
-the make/model and other relevant information about your machine along with
-the full output of "lshal" and "lspci" attached, and what extra quirks you
-needed to add for successful suspend/resume to rworkman@slackware.com
-
-==============================================================================
-
-If you need the system to do certain operations before going to sleep and
-then undo them (or perhaps do something new) when waking back up, pm-utils
-supports something called "hooks."  The hooks installed by packages (not only
-pm-utils itself) should be in /usr/lib/pm-utils/sleep.d/, while any hooks 
-installed by the local system administrator (e.g. things that are only an
-issue on that one machine) should be in /etc/pm/sleep.d/.
-
-Looking at some of the existing hooks should give you a decent idea of their
-capabilities; as a head start, the functions used in the hooks are declared 
-in /usr/lib/pm-utils/functions, which is inherited elsewhere by 
-/usr/lib/pm-utils/pm-functions
-
-One way to contribute to pm-utils indirectly is by writing and sending any
-needed hooks scripts to upstream projects; as an example, the hook that 
-ships with wicd was contributed by me.  Ideally, the pm-utils package should
-have a very minimum number of hooks shipped with it, as they should ship with
-the package to which the hook pertains; for example, the grub package would
-ship its own hook.
-
-==============================================================================
-
-We have removed several hooks from the default upstream package in response
-to a discussion on the pm-utils mailing list; see the source directory of
-pm-utils for details, and if you happen to need any of the removed hooks,
-most of them are in /usr/doc/pm-utils-*/extra_hooks/
-
-==============================================================================
-
-KNOWN BUGS
-
-If your alsa drivers don't correctly save and restore state across a sleep /
-resume cycle (due to a buggy driver), then you will need to add the drivers
-to a custom file named /etc/pm/config.d/defaults (create the file if it does
-not exist already) in a variable named "SUSPEND_MODULES" - see the file at
-/usr/lib/pm-utils/defaults for proper format.
-
-==============================================================================
-
diff --git a/system/pm-utils/patches/99video.diff b/system/pm-utils/patches/99video.diff
deleted file mode 100644
index f38b001117..0000000000
--- a/system/pm-utils/patches/99video.diff
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/pm/sleep.d/99video
-+++ b/pm/sleep.d/99video
-@@ -144,7 +144,7 @@ suspend_video()
- 	local acpi_flag=0
- 	quirk "${QUIRK_S3_BIOS}" && 		acpi_flag=$(($acpi_flag + 1))
- 	quirk "${QUIRK_S3_MODE}" && 		acpi_flag=$(($acpi_flag + 2))
--	[ 0 -ne $acpi_flag ] && sysctl -w kernel.acpi_video_flags=$acpi_flag
-+	sysctl -w kernel.acpi_video_flags=$acpi_flag
- 	
- 	quirk "${QUIRK_NOFB}" && 		die_if_framebuffer
- 	quirk "${QUIRK_VBESTATE_RESTORE}" && 	vbe_savestate
-@@ -166,8 +166,6 @@ resume_video()
- 	quirk "${QUIRK_RADEON_OFF}" && 		radeon_on
- 	quirk "${QUIRK_DPMS_ON}" && 		vbe dpms on
- 	quirk "${QUIRK_RESET_BRIGHTNESS}" && 	reset_brightness
--	# always reset acpi_video_flag -- makes quirk testing more reliable.
--	sysctl -w kernel.acpi_video_flags=0
- 	return 0  # avoid spurious hook exit failure message.
- }
- 
diff --git a/system/pm-utils/patches/pm-utils-functions.in.patch b/system/pm-utils/patches/pm-utils-functions.in.patch
deleted file mode 100644
index 834fe6599c..0000000000
--- a/system/pm-utils/patches/pm-utils-functions.in.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-diff -Nur pm-utils-1.2.2.1.orig/pm/functions.in pm-utils-1.2.2.1/pm/functions.in
---- pm-utils-1.2.2.1.orig/pm/functions.in	2008-10-05 20:49:09.000000000 -0500
-+++ pm-utils-1.2.2.1/pm/functions.in	2008-10-24 14:49:56.911161730 -0500
-@@ -124,15 +124,19 @@
- 	done
- }
- 
--# Service management is sysv dependent.
--# TODO: modularize this to make it work with other init systems.
- if ! command_exists service; then
- 	service()
- 	{
-+		# Pure SysV init
- 		if [ -x "/etc/init.d/$1" ]; then
- 			svc="$1"
- 			shift
- 			"/etc/init.d/$svc" "$@"
-+		# Slackware's BSD-style SysV init
-+		elif [ -x "/etc/rc.d/rc.${1}" ]; then
-+			svc="$1"
-+			shift
-+			"/etc/rc.d/rc.${1}" "$@"
- 		else
- 			log "${1}: unrecognized service"
- 			return 1
diff --git a/system/pm-utils/pm-utils.SlackBuild b/system/pm-utils/pm-utils.SlackBuild
deleted file mode 100644
index c92c8c3567..0000000000
--- a/system/pm-utils/pm-utils.SlackBuild
+++ /dev/null
@@ -1,113 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for pm-utils
-
-# Copyright 2008  Robby Workman, Northport, Alabama, USA 
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PRGNAM=pm-utils
-VERSION=1.2.2.1
-ARCH=${ARCH:-i486}
-BUILD=${BUILD:-2}
-TAG=${TAG:-_SBo}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-elif [ "$ARCH" = "s390" ]; then
-  SLKCFLAGS="-O2"
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-fi
-
-set -e
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-$VERSION
-tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
-cd $PRGNAM-$VERSION
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-# Fix up some SysV init hardcoding
-patch -p1 < $CWD/patches/pm-utils-functions.in.patch
-
-# Fix a bug where acpi video flags aren't properly reset after a resume,
-# causing subsequent resumes to fail
-patch -p1 < $CWD/patches/99video.diff
-
-CFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --sysconfdir=/etc \
-  --docdir=/usr/doc/$PRGNAM-$VERSION \
-  --mandir=/usr/man \
-  --build=$ARCH-slackware-linux
-
-make
-make install DESTDIR=$PKG
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-
-( cd $PKG/usr/man || exit 1
-  find . -type f -exec gzip -9 {} \;
-  for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
-)
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a AUTHORS COPYING ChangeLog INSTALL NEWS README* TODO \
-  $PKG/usr/doc/$PRGNAM-$VERSION
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-cat $CWD/README.SLACKWARE > $PKG/usr/doc/$PRGNAM-$VERSION/README.SLACKWARE
-
-# According to this thread, these hooks should not be needed:
-#  http://lists.freedesktop.org/archives/pm-utils/2008-November/001753.html
-# #####  MOVED HOOKS
-# 1. 50ntpd: ntp gracefully handles disappearing net on its own
-# 2. 55battery: hal >0.5.10 handles this on its own
-# 3. 90clock: Most systems should keep the hwclock in sync over a suspend /
-#    resume cycle, and since this hook is a severe time waster otherwise,
-#    we'll kill it.
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/extra_hooks
-mv $PKG/usr/lib/pm-utils/sleep.d/{50ntpd,55battery,90clock} \
-  $PKG/usr/doc/$PRGNAM-$VERSION/extra_hooks
-# #####  REMOVED HOOKS
-# 4. 65alsa: According to the alsa devs, this hook is useless.  Correct
-#    way to workaround buggy alsa drivers is documented in README.SLACKWARE
-#    http://lists.freedesktop.org/archives/pm-utils/2008-November/001808.html
-# 5. 94cpufreq: all cpufreq governors are "sane" now, so this isn't needed
-rm -f $PKG/usr/lib/pm-utils/sleep.d/{65alsa,94cpufreq}
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz
diff --git a/system/pm-utils/pm-utils.info b/system/pm-utils/pm-utils.info
deleted file mode 100644
index e1160f734a..0000000000
--- a/system/pm-utils/pm-utils.info
+++ /dev/null
@@ -1,8 +0,0 @@
-PRGNAM="pm-utils"
-VERSION="1.2.2.1"
-HOMEPAGE="http://pm-utils.freedesktop.org/"
-DOWNLOAD="http://pm-utils.freedesktop.org/releases/pm-utils-1.2.2.1.tar.gz"
-MD5SUM="dcc7bde623d0bae207158e153b7394a8"
-MAINTAINER="Robby Workman"
-EMAIL="rw@rlworkman.net"
-APPROVED="dsomero"
diff --git a/system/pm-utils/slack-desc b/system/pm-utils/slack-desc
deleted file mode 100644
index 8aed9ddbd6..0000000000
--- a/system/pm-utils/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-        |-----handy-ruler----------------------------------------------------|
-pm-utils: pm-utils (Power Management Utilities)
-pm-utils: 
-pm-utils: The pm-utils package provides simple shell command line tools
-pm-utils: to suspend and hibernate computers that can be used to run 
-pm-utils: vendor or distro supplied scripts on suspend and resume.
-pm-utils: 
-pm-utils: Homepage: http://pm-utils.freedesktop.org
-pm-utils: 
-pm-utils: 
-pm-utils: 
-pm-utils: