diff options
Diffstat (limited to 'office/texlive')
| -rw-r--r-- | office/texlive/README | 14 | ||||
| -rw-r--r-- | office/texlive/prep/texmf_get.sh | 248 | ||||
| -rw-r--r-- | office/texlive/slack-desc | 10 | ||||
| -rw-r--r-- | office/texlive/texlive.SlackBuild | 106 | ||||
| -rw-r--r-- | office/texlive/texlive.info | 14 |
5 files changed, 197 insertions, 195 deletions
diff --git a/office/texlive/README b/office/texlive/README index 672f8fd4b1..1498b10711 100644 --- a/office/texlive/README +++ b/office/texlive/README @@ -1,17 +1,15 @@ TeXLive (TeXLive binaries, support files, TeX formats) -This package contains binaries (including xindy and biber) and many -support files, TeX formats and packages, and other files included -in the TeXLive TeX distribution. This should be adequate for the -needs of most TeX users. +This package contains binaries (including xindy and biber) +and many support files, TeX formats and packages, and other files included +in the TeXLive TeX distribution. This should be adequate for the needs of +most TeX users. -The remaining stuff can be found in texlive-extra, texlive-fonts, and +The remaining stuff can be found in texlive-extra, texlive-fonts, and texlive-docs, all of which are also available at SlackBuilds.org. -ConTeXt is currently not supported. - Have a look at the scripts in the prep/ directory to see how the texmf archives were created from the original Texlive netarchives. -Note that this package conflicts with the tetex packages in Slackware, +Note that this package conflicts with the tetex packages in Slackware, so you'll need to remove tetex and tetex-doc before installing TeXLive. diff --git a/office/texlive/prep/texmf_get.sh b/office/texlive/prep/texmf_get.sh index f005b9711f..5f3e042b17 100644 --- a/office/texlive/prep/texmf_get.sh +++ b/office/texlive/prep/texmf_get.sh @@ -1,6 +1,6 @@ #!/bin/bash -# texmf_get.sh (c) 2016 Johannes Schoepfer, slackbuilds@schoepfer.info +# texmf_get.sh (c) 2016 Johannes Schoepfer, slackbuilds[at]schoepfer[dot]info # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,20 +20,23 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # -# V 0.5 +# V 0.6 # # Prepare xz-compressed tarballs of texlive-texmf-trees based on texlive.tlpdb # This script takes care of dependencies(as far as these are present in texlive.tlpdb) of collections and packages, # and that every texlive-package is included only once. +# +# Policy from texlive-netarchive: Every package is included as dependency in exactly one collection. A package may have dependecies on other packages from any collection. -# available packages http://mirror.ctan.org/systems/texlive/tlnet/archive/ +# packages source: http://mirror.ctan.org/systems/texlive/tlnet/archive/ #set -e +MAJORVERSION=2016 # release mirror mirror="http://mirror.ctan.org/systems/texlive/tlnet/" # pre-test mirror 2016 # mirror="http://ftp.cstug.cz/pub/tex/local/tlpretest/" -LANG=C +LANG=C TMP=$PWD/tmp output=$TMP/texlive.packages output_doc=$TMP/texlive.doc.packages @@ -64,10 +67,10 @@ packages () { # The base PACKAGES=" - collection-basic - collection-latex - collection-genericrecommended - collection-latexrecommended + collection-basic + collection-latex + collection-genericrecommended + collection-latexrecommended collection-xetex collection-metapost collection-plainextra @@ -77,8 +80,9 @@ packages () { collection-htmlxml collection-luatex collection-fontsrecommended - collection-mathextra + collection-mathextra collection-humanities + collection-context lh yfonts doublestroke @@ -98,7 +102,17 @@ packages () { stmaryrd subfigure titlesec + siunitx + combelow csplain + csquotes + etoolbox + etextools + glossaries + imakeidx + idxlayout + bidi + filecontents biblatex biber.x86_64-linux biber.i386-linux @@ -114,27 +128,27 @@ packages () { collection-langafrican hyphen-czech hyphen-slovak - hyphen-indic - hyphen-sanskrit - hyphen-armenian + hyphen-indic + hyphen-sanskrit + hyphen-armenian hyphen-afrikaans hyphen-esperanto - hyphen-bulgarian - hyphen-churchslavonic - hyphen-mongolian - hyphen-russian - hyphen-serbian - hyphen-ukrainian - hyphen-catalan - hyphen-galician - hyphen-chinese - hyphen-coptic - hyphen-georgian - hyphen-indonesian - hyphen-interlingua - hyphen-thai - hyphen-turkmen - hyphen-arabic + hyphen-bulgarian + hyphen-churchslavonic + hyphen-mongolian + hyphen-russian + hyphen-serbian + hyphen-ukrainian + hyphen-catalan + hyphen-galician + hyphen-chinese + hyphen-coptic + hyphen-georgian + hyphen-indonesian + hyphen-interlingua + hyphen-thai + hyphen-turkmen + hyphen-arabic hyphen-farsi" \ texmfget base @@ -146,12 +160,12 @@ PACKAGES="collection-fontsextra" texmfget fonts collection-latexextra collection-pictures collection-games - collection-publishers - collection-bibtexextra - collection-binextra - collection-science + collection-publishers + collection-bibtexextra + collection-binextra + collection-science collection-omega - collection-music + collection-music collection-langother collection-pstricks collection-langcyrillic @@ -167,6 +181,16 @@ PACKAGES="collection-fontsextra" texmfget fonts # The docs-tarball - very big (about 1300 MB) texmfget docs + if [ "$TARBALL" != docs ] + then + echo "Packages-list: $output.meta.$TARBALL" + while read collection + do + grep -w "$collection" $collections_done &> /dev/null + [ $? != 0 ] && echo "WARNING: $collection was not processed, please edit packages-function." + done < $TMP/allcollections + fi + # Following aren't supported #NAME=context PACKAGES="collection-context" ./texmf_get.sh #NAME=texworks PACKAGES="collection-texworks" ./texmf_get.sh @@ -214,7 +238,7 @@ package_meta () { # collection start linenumer start_n="$(grep -n ^"name ${collection}$" $TMP/$db | cut -d':' -f1)" [ -z "$start_n" ] && echo "$collection was not found in $TMP/$db, bye." && exit 1 - + # find end of package/collection for emptyline in $emptylines do @@ -224,13 +248,10 @@ package_meta () { break fi done - + sed "${start_n},${end_n}!d" $TMP/$db > $tmpfile } - - - package_list () { # Only do something if $collection wasn't already done before while [ -s $collections_tobedone ] @@ -239,7 +260,7 @@ do # continue with next collection if collection was already done if [ -s "$collections_done" ] then - grep -w "^${collection}$" $collections_done &> /dev/null + grep -w "^${collection}$" $collections_done &> /dev/null if [ $? = 0 ] then sed -i "/^$collection$/d" $collections_tobedone @@ -251,11 +272,11 @@ do then cp $texmf/$collection.meta $tmpfile else - package_meta + package_meta fi # ignore dependend collections generally, as this adds far too much and therefore reduces controll over what packages to be added - sed -i "/^depend collection/d" $tmpfile + sed -i "/^depend collection/d" $tmpfile # If $collection is a singel package, add it here if [ -n "$(head -n1 $tmpfile | fgrep -v "name collection" )" ] then @@ -276,7 +297,6 @@ done } - untar () { # download packages, if not already available. Not for all packages a corresponding .doc package exists rm $1.meta @@ -289,7 +309,9 @@ untar () { else sha512="$(grep ^containerchecksum $texmf/$package.meta | cut -d' ' -f2 )" fi - [ ! -s ${package}${flavour}.tar.xz ] && wget ${mirror}archive/${package}${flavour}.tar.xz + # try two times if package isn't present, with -t1 to get another mirror the second time + [ ! -s ${package}${flavour}.tar.xz ] && wget -t1 -c ${mirror}archive/${package}${flavour}.tar.xz + [ ! -s ${package}${flavour}.tar.xz ] && wget -t1 -c ${mirror}archive/${package}${flavour}.tar.xz [ ! -s ${package}${flavour}.tar.xz ] && echo "Downloading ${package}${flavour}.tar.xz did not work, writing to $errorlog" && echo "Error downloading ${package}${flavour}.tar.xz" >> $errorlog && exit 1 # check sha512, give three tries for downloading aggain(diffrent mirrors are used automatically) for tillthree in 1 2 3 @@ -297,8 +319,8 @@ untar () { if [ "$(sha512sum ${package}${flavour}.tar.xz | cut -d' ' -f1 )" != "$sha512" ] then # Download (hopefully) newer file - rm ${package}${flavour}.tar.xz - wget ${mirror}archive/${package}${flavour}.tar.xz + rm ${package}${flavour}.tar.xz + wget -t1 -c ${mirror}archive/${package}${flavour}.tar.xz else break fi @@ -315,7 +337,7 @@ untar () { # exclude the tlpkg-stuff, TLUtils.pm(needed tu run texlive) comes from source installation grep -w ^"relocated 1" $texmf/$package.meta &>/dev/null - if [ $? = 0 ] + if [ $? = 0 ] then tar vxf ${package}${flavour}.tar.xz --exclude tlpkg -C texmf-dist || exit 1 else @@ -335,20 +357,25 @@ untar () { # copy packages-list to texmf-dist, so included packages are known in later installation sort -n $1.meta > TMPFILE mv TMPFILE $1.meta - cp $1.meta texmf-dist/ + cp $1.meta texmf-dist/ - # remove uneeded sources - rm -rf texmf-dist/scripts/context/stubs/source/ +} + +remove_cruft () { + # Remove m$-stuff, ConTeXt single-user-system stuff, KOMA-Script sources and pdf-manpages rm -rf texmf-dist/source - # Remove m$-stuff - find . -type d -name 'win32' -exec rm -rf {} + - find . -type d -name 'win64' -exec rm -rf {} + - find . -type d -name 'mswin' -exec rm -rf {} + - find . -type d -name 'win' -exec rm -rf {} + - find . -type f -name '*.bat' -delete - find . -type f -name '*win32*' -delete - find . -type f -name 'winansi*' -delete - # remove zero-length files, as these appear e.g. in hyph-utf8 tex-package. + rm -rf texmf-dist/scripts/context/stubs/source/ + find texmf-dist/ -type d -name 'win32' -exec rm -rf {} + + find texmf-dist/ -type d -name 'win64' -exec rm -rf {} + + find texmf-dist/ -type d -name 'mswin' -exec rm -rf {} + + find texmf-dist/ -type d -name 'win' -exec rm -rf {} + + find texmf-dist/ -type d -name 'setup' -exec rm -rf {} + + find texmf-dist/ -type d -name 'install' -exec rm -rf {} + + find texmf-dist/ -type f -name '*.bat' -delete + find texmf-dist/ -type f -name '*win32*' -delete + find texmf-dist/ -type f -name 'winansi*' -delete + find texmf-dist/ -type f -name '*-man.pdf' -delete + # remove zero-length files, as these appear e.g. in hyph-utf8 tex-package. find . -type f -size 0c -delete } @@ -363,7 +390,7 @@ if [ $TARBALL != docs ] then echo "Preparing list of packages to be added the $NAME-tarball ..." echo "$PACKAGES" | sed "s/[[:space:]]//g;/^$/d" >> $collections_tobedone - package_list + package_list fi if [ $NAME = $TARBALL ] @@ -404,26 +431,26 @@ cd $texmf # cleanup tar-directory, just in case [ -d texmf-dist ] && rm -rf texmf-dist -#unset flavour ; export flavour +#unset flavour ; export flavour mkdir texmf-dist &> /dev/null VERSION=$(cat $TMP/VERSION) case $TARBALL in docs) - export flavour=".doc" + export flavour=".doc" untar $output_doc - #tar Jvcf $TMP/texlive-texmf-docs-$VERSION.tar.xz texmf-dist || exit 1 + remove_cruft tar vrf $TMP/texlive-$TARBALL-$VERSION.tar texmf-dist || exit 1 echo "Packages-list: $output_doc" rm -rf texmf-dist ;; base|extra|fonts) untar $output + remove_cruft tar vrf $TMP/texlive-$TARBALL-$VERSION.tar texmf-dist || exit 1 cat $output.meta >> $output.meta.$TARBALL - rm $output.meta - echo "Packages-list: $output.meta.$TARBALL" - rm $output + rm $output.meta + rm $output rm -rf texmf-dist ;; esac @@ -443,16 +470,10 @@ mkdir -p $texmf cd $TMP # create run.tlpkg and doc.tlpkg only if $db.orig isn't there yet/was deleted -if [ ! -s $TMP/${db}.orig ] +if [ ! -s $TMP/${db}.orig -o ! -s $TMP/${db} ] then - # Set date manually upload date from $mirror/tlpkg/texlive.tlpdb. Looking a better way for auto-detect date/get reviosn in some way - #echo 20160405 > VERSION - date +%Y%m%d > VERSION - # get VERSION from texlive.tlpdb upload date. Not the best approach ... -# date -d $(curl -L -s ${mirror}/tlpkg/ | grep -w texlive.tlpdb | head -n1 | rev | cut -d':' -f2 | cut -d' ' -f2 | cut -d'>' -f1 | rev ) | date -f - +%Y%m%d > VERSION - - - wget -O $TMP/${db}.orig -c ${mirror}tlpkg/$db + echo $MAJORVERSION.$(date +%y%m%d) > VERSION + wget -c -O $TMP/${db}.orig -c ${mirror}tlpkg/$db # shrink db to be faster on later processing sed "/^ \+./d;/^longdesc \+./d;/^cat\+./d;/^rev\+./d;/^exe\+./d;/^bin\+./d;/^src\+./d" $TMP/${db}.orig > $TMP/$db @@ -460,42 +481,45 @@ then rm -rf $texmf/*.meta rm $TMP/run.tlpkg [ -f "$output_doc" ] && rm "$output_doc" -fi - -# Make a list of all packages available, but exclude binary and installer/configuration packages. -# It turns out that packagenames without '.' are what we want. Packages with '.' are all binarie-packages, which we biuld from source. -grep ^name $TMP/$db | grep -v ^"name collection-" | grep -v ^"name scheme-" | grep -v '\.' | cut -d' ' -f2 > $TMP/allpackages + # Make a list of all packages available, but exclude binary and installer/configuration packages. + # It turns out that packagenames without '.' are what we want. Packages with '.' are all binarie-packages, which are build from source. + grep ^name $TMP/$db | grep -v ^"name collection-" | grep -v ^"name scheme-" | grep -v '\.' | cut -d' ' -f2 > $TMP/allpackages -# add biber (perl)binaries as special exception. -cat << EOF >> $TMP/allpackages -biber.x86_64-linux -biber.i386-linux -EOF - - # further globaly excluded packages, which does not make sense without tlpkg-installer, or are non-linux specific, or are already covered by the sourcebuild. + # Make a list of all collections + grep ^"name collection-" $TMP/$db | cut -d' ' -f2 > $TMP/allcollections + + # add biber (perl)binaries as special exception. + cat <<- EOF >> $TMP/allpackages + biber.x86_64-linux + biber.i386-linux + EOF + +fi + +# globaly excluded packages, which does not make sense without tlpkg-installer, or are non-linux specific, or are already covered by the sourcebuild, +# or are covered by an external package(asymptote), or obsolete packages(datetime replaced by datetime2, anysize replaced by geometry) global_exclude=" -texworks " -# unused variable, to be considered if these are already included by the source-tarball, or strip these of the source-tarball and add them as texlive-package? +# currently unused variable, to be considered if these are already included by the source-tarball, or strip these of the source-tarball and add them as texlive-package? zglobal_exclude=" -bibtex8 -bibtexu -chktex -cjkutils -detex -dtl -dvi2tty -dvidvi -dviljk -dvipdfmx -dvipng +bibtex8 +bibtexu +chktex +cjkutils +detex +dtl +dvi2tty +dvidvi +dviljk +dvipdfmx +dvipng dvipos dvisvgm gsftopk pdftools -synctex +synctex texconfig texlive-docindex texlive-msg-translations @@ -512,9 +536,9 @@ luatex for i in $global_exclude do - if [ -z "$(grep -w ^"$i"$ $TMP/allpackages)" ] + if [ -z "$(grep -w ^"$i"$ $TMP/allpackages)" ] then - echo "\"$i\" seems not to be a tex-package listet in $db, correct the" + echo "\"$i\" seems not to be a tex-package listet in $db, edit the" echo "global_exclude variable in this script, bye." exit 1 else @@ -523,7 +547,7 @@ do [ -s $output_doc ] && sed -i "/^${i}$/d" $output_doc fi done - + # get linenumbers of empty lines [ -z "$emptylines" ] && emptylines="$(grep -n ^$ $TMP/$db | cut -d':' -f1)" # sort doc- and run- packages out to avoid binfiles and sourcfile in the texmf-tree @@ -542,25 +566,25 @@ do fi done < $TMP/allpackages -# handle biber binaries to be add-able +# handle biber binaries to be add-able cat << EOF >> $TMP/run.tlpkg biber.x86_64-linux biber.i386-linux EOF - [ -f "$collections_done" ] && rm "$collections_done" [ -f "$collections_tobedone" ] && rm "$collections_tobedone" -packages +packages # As the demanded packages are in the tarball, compress it. - echo "Compressing $TMP/texlive-$TARBALL-$VERSION.tar ..." - if [ -s $TMP/texlive-$TARBALL-$VERSION.tar ]; then - [ -f $TMP/texlive-$TARBALL-$VERSION.tar.xz ] && rm $TMP/texlive-$TARBALL-$VERSION.tar.xz - xz -9 -T0 $TMP/texlive-$TARBALL-$VERSION.tar || exit 1 - ls -lah $TMP/texlive-$TARBALL-$VERSION.tar.xz - fi +echo "Compressing $TMP/texlive-$TARBALL-$VERSION.tar ..." +if [ -s $TMP/texlive-$TARBALL-$VERSION.tar ] +then + [ -f $TMP/texlive-$TARBALL-$VERSION.tar.xz ] && rm $TMP/texlive-$TARBALL-$VERSION.tar.xz + xz -9 -T0 $TMP/texlive-$TARBALL-$VERSION.tar || exit 1 + ls -lah $TMP/texlive-$TARBALL-$VERSION.tar.xz +fi # cleanup rm $tmpfile diff --git a/office/texlive/slack-desc b/office/texlive/slack-desc index e80c9361a3..0749b95fd1 100644 --- a/office/texlive/slack-desc +++ b/office/texlive/slack-desc @@ -8,11 +8,11 @@ |-----handy-ruler------------------------------------------------------| texlive: TeXLive (TeXLive binaries, support files, TeX formats) texlive: -texlive: This package contains binaries (including xindy and biber), support -texlive: files, TeX formats and packages, and other files included in the -texlive: TeXLive TeX distribution. Included are input files for TeX, runtime -texlive: configuration files, hyphenation tables, manpages, and the computer -texlive: modern fonts. +texlive: This package contains binaries (including xindy and +texlive: biber), support files, TeX formats and packages, and other files +texlive: included in the TeXLive TeX distribution. Included are input files +texlive: for TeX, runtime configuration files, hyphenation tables, manpages, +texlive: and the computer modern fonts. texlive: texlive: More texmf files can be found in the texlive-extra and texlive-fonts texlive: packages; all of the docs can be found in the texlive-docs package. diff --git a/office/texlive/texlive.SlackBuild b/office/texlive/texlive.SlackBuild index 6abd007618..e2d8141cc0 100644 --- a/office/texlive/texlive.SlackBuild +++ b/office/texlive/texlive.SlackBuild @@ -24,13 +24,13 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# URL: ftp://tug.org/historic/systems/texlive/2016/ -# Testrelease 2016 ftp://tug.org/texlive/Images/test/ +# URL: ftp://tug.org/historic/systems/texlive/ +# Testrelease: ftp://tug.org/texlive/Images/test/ PRGNAM=texlive -VERSION=20160523 -TEXMF_VERS=20161023 -BUILD=${BUILD:-3} +SOURCEVERSION=20160523 +VERSION=${VERSION:-2016.161031} +BUILD=${BUILD:-1} TAG=${TAG:-_SBo} CWD=$(pwd) @@ -62,14 +62,14 @@ fi rm -rf $PKG mkdir -p $TMP $PKG $OUTPUT cd $TMP -rm -rf texlive-$VERSION-source -tar xvf $CWD/texlive-${VERSION}b-source.tar.xz -cd texlive-$VERSION-source +rm -rf texlive-$SOURCEVERSION-source +tar xvf $CWD/texlive-${SOURCEVERSION}b-source.tar.xz +cd texlive-$SOURCEVERSION-source chown -R root:root . chmod -R u+w,go-w,a+rX-st . export LANG=C -export PATH="$PKG/usr/bin:$PATH" +export PATH="$PKG/usr/bin:$PATH" export LD_LIBRARY_PATH="$PKG/usr/lib${LIBDIRSUFFIX}:$LD_LIBRARY_PATH" # set TEXMFROOT and TEXMFLOCAL @@ -78,13 +78,9 @@ sed -i "s|^TEXMFROOT.*|TEXMFROOT = \$SELFAUTODIR/share|;s|^TEXMFLOCAL.*|TEXMFLOC # Fix a segfault in upmendex, thanks to the lfs-folks. patch -Np1 -i $CWD/patches/texlive-20160523b-source-upstream_fixes-1.patch -# allow the tex4ht binary to process the updated xdv id byte in xetex -# for tl'2016 (i.e., 0.99996). Without this, htxelatex and the like -# simply bail out. -patch -p0 < $CWD/patches/tex4ht.patch - # --with-system-harfbuzz requires graphite2 (and harfbuzz linked to it) -mkdir build ; cd build +mkdir build +pushd build CFLAGS="$SLKCFLAGS" \ CXXFLAGS="$SLKCFLAGS" \ ../configure \ @@ -105,6 +101,7 @@ mkdir build ; cd build --disable-xindy-docs \ --disable-xindy-rules \ --with-clisp-runtime=system \ + --enable-gc=system \ --with-system-poppler \ --with-system-xpdf \ --with-system-zlib \ @@ -120,63 +117,44 @@ mkdir build ; cd build --with-system-mpfr \ --with-system-fontconfig \ --with-system-ncurses \ - --enable-gc=system \ --build=$ARCH-slackware-linux - make + make # make check - make install-strip DESTDIR=$PKG + make install-strip DESTDIR=$PKG # Create symlinks make texlinks DESTDIR=$PKG -cd .. +popd # install the texmf stuff, overwrite partly stuff coming from the source build; # don't remove/separate koma-script docs as this is the wish of the author mkdir -p $PKG/usr/share -tar vxf $CWD/texlive-base-$TEXMF_VERS.tar.xz -C $PKG/usr/share +tar vxf $CWD/texlive-base-$VERSION.tar.xz -C $PKG/usr/share chown -R root:root $PKG chmod -R u+w,go-w,a+rX-st $PKG -( + # Move biber binary to $PATH -cd $PKG/usr/share/texmf-dist case $ARCH in - "x86_64") mv bin/x86_64-linux/biber $PKG/usr/bin ;; - "i586") mv bin/i386-linux/biber $PKG/usr/bin ;; + "x86_64") mv $PKG/usr/share/texmf-dist/bin/x86_64-linux/biber $PKG/usr/bin ;; + "i586") mv $PKG/usr/share/texmf-dist/bin/i386-linux/biber $PKG/usr/bin ;; esac rm -rf $PKG/usr/share/texmf-dist/bin -) - # set TEXMFROOT and TEXMFLOCAL sed -i \ "s|^TEXMFROOT.*|TEXMFROOT = \$SELFAUTODIR/share|;s|^TEXMFLOCAL.*|TEXMFLOCAL = \$TEXMFROOT/texmf-local|" \ $PKG/usr/share/texmf-dist/web2c/texmf.cnf -# Remove context-stuff -rm -rf $PKG/usr/share/texmf-dist/scripts/context - -## Move context script(mtxrun) to the correct place. -## Handle the short context-helper scripts, by putting stub-scripts -## in the texlive-extra package and delete them here, as the needed -## context-packages are included in the texlive-extra package. -#( -#cd $PKG/usr/share/texmf-dist/scripts/context/stubs/unix/ -#mv mtxrun $PKG/usr/bin/ -#rm context contextjit luatools mtxrunjit texexec texmfstart -#cd ../../ -#rmdir -p stubs/unix -#) - # Install the docs while we're still here mkdir -p $PKG/usr/doc/texlive-$VERSION cp -a ChangeLog README* $PKG/usr/doc/texlive-$VERSION # Put a symlink to /usr/share/texmf-dist/doc in our Slackware docdir -ln -s ../../share/texmf-dist/doc $PKG/usr/doc/$PRGNAM-$VERSION/doc +ln -s ../../share/texmf-dist/doc $PKG/usr/doc/texlive-$VERSION/doc # We won't make tlmgr easily available; it's still there, but # we'll make it harder to void the warranty :-) rm -f $PKG/usr/bin/tlmgr -cat $CWD/README.tlpkg > $PKG/usr/doc/$PRGNAM-$VERSION/README.tlpkg +cat $CWD/README.tlpkg > $PKG/usr/doc/texlive-$VERSION/README.tlpkg # Create some directories to make it clear that they're owned by this package mkdir -p $PKG/usr/share/{texmf-config,texmf-var,texmf-local} @@ -185,6 +163,29 @@ mkdir -p $PKG/usr/share/{texmf-config,texmf-var,texmf-local} mkdir -p $PKG/usr/share/perl5 mv texk/tests/TeXLive $PKG/usr/share/perl5/ +mkdir -p $PKG/etc/profile.d +cat << 'EOF' > $PKG/etc/profile.d/setuptex.sh +#!/bin/sh + +# set environment for ConTeXt + +export TEXMF=/usr/share/texmf-dist +export TEXMFCACHE=~/.texmf-cache +export OSFONTDIR=~/.fonts:/usr/share/fonts +unset TEXINPUTS MPINPUTS MFINPUTS +EOF +cat << 'EOF' > $PKG/etc/profile.d/setuptex.csh +#!/bin/csh + +# set environment for ConTeXt + +setenv TEXMF /usr/share/texmf-dist +setenv TEXMFCACHE ~/.texmf-cache +setenv OSFONTDIR ~/.fonts:/usr/share/fonts +unsetenv TEXINPUTS MPINPUTS MFINPUTS +EOF +chmod 755 $PKG/etc/profile.d/setuptex.* + # Handle the man pages find $PKG/usr/man -type f -exec gzip -9 {} \; for i in $(find $PKG/usr/man -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done @@ -197,24 +198,5 @@ mkdir -p $PKG/install cat $CWD/doinst.sh > $PKG/install/doinst.sh cat $CWD/slack-desc > $PKG/install/slack-desc -###### Maybe context is better supportet by a standalone installation, -## have a look at http://wiki.contextgarden.net/ -# -## create profile, to make ConTEXt working -#mkdir -p $PKG/etc/profile.d -#cat << EOF > $PKG/etc/profile.d/texlive.sh -##!/bin/sh -## Add TEXMF and OSFONTDIR for ConTEXt: -#TEXMF=/usr/share/texmf-dist -#OSFONTDIR=~/.fonts:/usr/share/fonts -#EOF -#cat << EOF > $PKG/etc/profile.d/texlive.csh -##!/bin/csh -## Add TEXMF and OSFONTDIR for ConTEXt: -#setenv TEXMF /usr/share/texmf-dist -#setenv OSFONTDIR ~/.fonts:/usr/share/fonts -#EOF -#chmod 755 $PKG/etc/profile.d/texlive.* - cd $PKG /sbin/makepkg -p -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz} diff --git a/office/texlive/texlive.info b/office/texlive/texlive.info index 6784669f09..9014552857 100644 --- a/office/texlive/texlive.info +++ b/office/texlive/texlive.info @@ -1,14 +1,12 @@ PRGNAM="texlive" -VERSION="20160523" +VERSION="2016.161031" HOMEPAGE="http://tug.org/texlive/" -DOWNLOAD="ftp://tug.org/historic/systems/texlive/2016/texlive-20160523b-source.tar.xz \ - http://slackware.schoepfer.info/slackbuilds/texlive/2016/texlive/texlive-base-20161023.tar.xz" +DOWNLOAD="http://mirrors.ctan.org/systems/texlive/Source/texlive-20160523b-source.tar.xz \ + http://slackware.schoepfer.info/slackbuilds/texlive/2016/texlive/texlive-base-2016.161031.tar.xz" MD5SUM="1e75db3412b3e2945fa94b0a423a29c7 \ - 1689161fb856c660ca833f02ef3bf0f7" -DOWNLOAD_x86_64="ftp://tug.org/historic/systems/texlive/2016/texlive-20160523b-source.tar.xz \ - http://slackware.schoepfer.info/slackbuilds/texlive/2016/texlive/texlive-base-20161023.tar.xz" -MD5SUM_x86_64="1e75db3412b3e2945fa94b0a423a29c7 \ - 1689161fb856c660ca833f02ef3bf0f7" + 2314d315b70a5f4dcc03eeb45db0be14" +DOWNLOAD_x86_64="" +MD5SUM_x86_64="" REQUIRES="" MAINTAINER="Johannes Schoepfer" EMAIL="slackbuilds[at]schoepfer[dot]info" |