diff options
Diffstat (limited to 'network')
| -rw-r--r-- | network/hylafax/README | 39 | ||||
| -rw-r--r-- | network/hylafax/config.local | 259 | ||||
| -rw-r--r-- | network/hylafax/hylafax.SlackBuild | 109 | ||||
| -rw-r--r-- | network/hylafax/hylafax.info | 8 | ||||
| -rw-r--r-- | network/hylafax/slack-desc | 19 |
5 files changed, 434 insertions, 0 deletions
diff --git a/network/hylafax/README b/network/hylafax/README new file mode 100644 index 0000000000..54fa621fff --- /dev/null +++ b/network/hylafax/README @@ -0,0 +1,39 @@ +HylaFAX is an enterprise-class system for sending and receiving +facsimiles as well as for sending alpha-numeric pages.The software +is designed around a client-server architecture. Fax modems may +reside on a single machine on a network and clients can submit +an outbound job from any other machine on the network. + +Client software is designed to be lightweight and easy to port. + + +If you need to start hylafax at boot +edit /etc/rc.d/rc.local and add the lines: + +script: +# Starting the HylaFAX hfaxd and faxq Daemons at Boot. + if [ -x /etc/rc.d/rc.hylafax ]; then + /etc/rc.d/rc.hylafax start + fi + +Edit /etc/inittab and add a line(s) similar to: + +m0:2345:respawn:/usr/sbin/faxgetty ttyS0 + +where 'm0' is unique in inittab and 'ttyS0' matches the device +name(s) used at the outset of the faxaddmodem script. + +With root permissions, execute '/usr/sbin/faxsetup'. +When finished, faxsetup will automatically run faxaddmodem +for you. Generally, you can follow all of the defaults +except those for FaxMaster, the local fax number(s), TSI, +and any modem-specific information in faxaddmodem. + +It would be wise to run faxcron and faxqclean regularly +from cron so that the queue directories do not clutter +up and fill the storage device. Many installations run +faxqclean every hour and faxcron every day. Insert +something like this into your uucp or root crontab file: + +0 * * * * /usr/sbin/faxqclean +0 0 * * * /usr/sbin/faxcron | mail -s "HylaFAX Usage Report" faxmaster diff --git a/network/hylafax/config.local b/network/hylafax/config.local new file mode 100644 index 0000000000..8b59755838 --- /dev/null +++ b/network/hylafax/config.local @@ -0,0 +1,259 @@ +# $Id: config.site,v 1.14 2007/06/21 19:21:45 aidan Exp $ +# +# HylaFAX Facsimile Software +# +# Copyright (c) 1990-1996 Sam Leffler +# Copyright (c) 1991-1996 Silicon Graphics, Inc. +# HylaFAX is a trademark of Silicon Graphics, Inc. +# +# Permission to use, copy, modify, distribute, and sell this software and +# its documentation for any purpose is hereby granted without fee, provided +# that (i) the above copyright notices and this permission notice appear in +# all copies of the software and related documentation, and (ii) the names of +# Sam Leffler and Silicon Graphics may not be used in any advertising or +# publicity relating to the software without the specific, prior written +# permission of Sam Leffler and Silicon Graphics. +# +# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +# +# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +# OF THIS SOFTWARE. +# + +# +# This file holds site-specific configuration parameters. +# +# Nothing is defined in here by default, the definitions +# commented out below serve as documentation for what you +# can set in this file or a config.local file. +# +# Note that you do not need to set anything here unless you +# want to override the auto-configuration behaviour and/or +# interactive prompting done by the configure script. +# + +# +# Package controls. +# +#DSO="auto" # configure DSO support (auto|IRIX|no) +#GETTY="auto" # type of getty support (auto|BSD|SysV) +#PS="auto" # PostScript support to use (auto|gs|dps|imp) +#SGI2FAX="auto" # configure SGI image support (auto|yes|no) +#DPS="no" # install SGI DPS-based RIP (yes|no) +GS="yes" # install Ghostscript RIP (yes|no) +#IMP="no" # install SGI Impressario 2.1 support (yes|no) +#REGEX="yes" # use distributed regular expression package +#UTMP="utmpx" # type of utmp+wtmp handling (auto|utmp|utmpx) +#DBLIB="no" # use distributed libdb distribution + +# +# Directory parameters. +# +DIR_BIN="/usr/bin" # directory for client apps +DIR_LIB="/usr/lib" # directory for libfaxserver, libfaxutil +DIR_LIBDATA="/usr/lib/hylafax" # directory for client data +DIR_LIBEXEC="/usr/libexec/hylafax" # directory for libraries&hidden apps +DIR_MAN="/usr/man" # directory for manual pages +DIR_SPOOL="/var/spool/hylafax" # directory for spooling area +DIR_SBIN="/usr/sbin" # directory for system apps +#DIR_LOCKS="/usr/spool/locks" # directory for UUCP lock files +#FONTMAP="/usr/share/ghostscript/3.33" # directorys containing Fontmap files +#PATH_AFM="/usr/lib/DPS/AFM" # directorys for AFM files + +# +# Miscellaneous parameters. +# +#DEFVRES="196" # default vertical res for outbound fax +#FILLORDER="MS2LSB" # bit order of cpu (MSB2LSB/LSB2MSB) +FAXGID="uucp" # group ID for fax user +FAXUID="uucp" # user ID for fax user +PAGESIZE="North American Letter" # default page size +#SYSGID="sys" # group ID for system installs +#SYSUID="bin" # user ID for system installs +#LOCKS="ascii" # default UUCP lockfile scheme +# +#PATH_GETTY="/etc/getty" # pathname of suitable getty program +#PATH_VGETTY="/bin/vgetty" # pathname of voice getty program +#PATH_EGETTY="/bin/egetty" # pathname of external getty program +#PATH_SENDMAIL="/usr/lib/sendmail" # pathname of suitable sendmail program +PATH_GSRIP="/usr/bin/gs" # pathname of Ghostscript-based RIP +#PATH_DPSRIP="/var/spool/hylafax/bin/ps2fax.exe" # pathname of DPS-based RIP +#PATH_IMPRIP="/usr/lib/print/psrip" # pathname of Impressario 2.1 RIP +#MANSCHEME="sysv-source-cat-strip" # manual page installation scheme +SYSVINIT="auto" # install SysV-style init support (auto|yes|no) +DIR_SYSVINIT="/etc/rc.d" # location of SysV-style init script +DIR_SYSVINITSTART="/etc/rc.d" # location of SysV-style start script +DIR_SYSVINITSTOP="/etc/rc.d" # location of SysV-style stop script +NAME_SYSVINITSTART="rc.hylafax" # name of SysV-style start script +NAME_SYSVINITSTOP="rc.hylafax" # name of SysV-style stop script +FAXQ_SERVER=yes # init script starts faxq +HFAXD_SERVER=yes # init script starts hfaxd +HFAXD_OLD_PROTOCOL=no # don't start old protocol +HFAXD_SNPP_SERVER=no # don't start paging protocol + +# SVR4 packaging stuff +#PKG_ARCH= # ARCH variable in pkginfo file +#PKG_EMAIL=someone@somehost.somedomain # EMAIL variable in pkginfo file +#PKG_VENDOR="Your Name Here" # VENDOR variable in pkginfo file +# + +# +# Parameters used when building the software. +# +# Note that configure has several ENVOPTS built into it that are +# set according to the target. This is done to help naive folks. +# +# Beware of changing the INSTALL definition; you *must* have an +# install script that emulates the Silicon Graphics install program! +# +#AR="/bin/ar" # pathname of suitable ar program +#AROPTS="rc" # options to ar for creating archive +#CC="gcc" # name/pathname of C compiler +#CXX="gcc" # name/pathname of C++ compiler +#CXXFILE="-x c++" # options for proper C++ processing +#ENVOPTS="-Aa" # options for getting ANSI C +#GCOPTS="-g" # options to pass C compiler +#GCXXOPTS="-g" # options to pass C++ compiler +#GENDIST="/sbin/gendist" # pathname of SGI inst generator program +#INSTALL='${SHELL} ${PORT}/install.sh' # SGI install program/emulator +#LIBMALLOC="auto" # yes|no|auto configure -lmalloc use +#LIBPORT='${PORT}/libport.a' # library with emulation code +#LIBSUN="auto" # yes|no|auto configure -lsun use +#LLDOPTS="" # extra link line options +#MACHDEPLIBS="" # extra libraries for linking +#OPTIMIZER="-O2 -march=i486 -mtune=i686" # optimizer flags +#PORTFUNCS="" # non-standard functions to emulate +#PROTOTYPES="-prototypes" # C compiler options for checking function prototypes +#RANLIB=":" # pathname of suitable ranlib program +#SHDLIBC="-lc_s" # shared C library, if not standard +#SIGHANDLERTYPES='(void(*)(int,...))' # types to check for signal handler +#STRIP="/bin/strip" # strip program used by install.sh +GLDOPTS="-L/usr/lib" +# +# The source for the TIFF library is not required +# to build this software, but the library is required +# to link against. If libtiff is installed in a +# non-standard location then setup LIBTIFF accordingly. +# +LIBTIFF="-L/usr/lib -ltiff" # linkage convention for libtiff +TIFFINC="/usr/include" # place to find tiffio.h +TIFFBIN="/usr/bin" # where TIFF tools live + +# +# The source for the ZLIB library is not required +# to build this software, but the library is required +# to link against. If ZLIB is installed in a +# non-standard location then setup LIBZ accordingly. +# +LIBZ="-L/usr/lib -lz" # linkage convention for libz +ZLIBINC="-I/usr/include" # place to find zlib.h + +# +# The source for the POSIX regular expression package +# is not required to build this software, but the package +# is required to link against. If the copy of the software +# that is included in this distribution is not to be used +# then set REGEX=no and supply the following definitions. +# +LIBREGEX=" " # linkage convention for regex package +REGEXINC="/usr/include" # place to find regex.h + +# +# The LIBDB hashed database package is (currently) used +# only by the MLA tools that are not publicly available +# but which are built from within this source tree. In +# the future the fax software may use the libdb software +# for the remote client capabilities database (so these +# hooks are included now). +# +# The source for the LIBDB hashed database package +# is not required to build this software, but the package +# is required to link against. If the copy of the software +# that is included in this distribution is not to be used +# then set DBLIB=no and supply the following definitions. +# +LIBDB=" " # linkage convention for libdb package +DBLIBINC="/usr/include" # place to find db.h + +# +# Parameters to control various workarounds for system bugs. +# +# These parameters are normally set in configure based on +# the target system. If they are set here, then they will +# override anything done by configure. +# +#CONFIG_OPENFIFO="O_RDONLY" # mode to open FIFOs in server proc's +#CONFIG_FIFOBUG="yes" # enable workaround for FIFO select bug +#CONFIG_TIOCMBISBYREF="yes" # pass arg by reference to ioctl +#CONFIG_WINSZHACK="no" # include extra files for TIOCWINSZ use +#CONFIG_ABORTBUG="no" # enable workaround for abort problems +#CONFIG_NOREOPEN="yes" # reopen tty device after toggling DTR +#CONFIG_NOSTDINDUP="yes" # do not redirect stdout to stdin in ondelay +#CONFIG_BADEXECVPROTO="no" # system has incorrect execv func decl +#CONFIG_BADEXECVEPROTO="no" # system has incorrect execve func decl +#CONFIG_BADGETOPTPROTO="no" # system has incorrect getopt func decl +#CONFIG_SOCKARGLENTYPE="unsigned long" # call-by-ref arg type for socket funcs +#CONFIG_BADSELECTPROTO="no" # system has way old select func decl +#CONFIG_MAXGID="5999" # maximum permissable GID +#CONFIG_OSFCNH="auto" # control inclusion of <osfcn.h> + +# +# Dynamic Shared Object (DSO) support. +# +# Beware that adding new support for DSOs may require some +# modifications to the */Makefile.dso files. +# +#DSOSUF="so" # DSO filename suffix +#DSODELAY="-delay_load" # DSO option for delayed loading +#DSOOPTS="-shared -rdata_shared" # options for building DSOs + +# +# Makefile construction parameters. +# +# These should not normally be set; configure will +# deduce the appropriate syntax to use for includes. +# +#MAKECXXOVERRIDE="=.C" # make override stuff for SunPRO C++ +#MAKEDEPINCLUDE="include" # make include for dependency files +#MAKEDSOINCLUDE="#" # make include for DSO support +#MAKEINCLUDE=".include" # make include syntax +#MAKELQUOTE="<" # make include syntax +#MAKERQUOTE=">" # make include syntax +#SETMAKE='MAKE = ${MAKE}' # define if make does not setup $MAKE +#MKDEPCOPTS="" # C compiler opts to supply w/ -M +#MKDEPCXXOPTS="" # C++ compiler opts to supply w/ -M + +# +# General system stuff used by the distribution. +# +# Beware of setting these as configure selects several programs +# based on whether or not they are capable of processing scripts +# included in the distribution (e.g AWK and SCRIPT_SH, SED). +# +#AWK="/bin/awk" # pathname of suitable awk program +#CAT="/bin/cat" # pathname of suitable cat program +#CHGRP="/etc/chgrp" # pathname of suitable chgrp program +#CHMOD="/etc/chmod" # pathname of suitable chmod program +#CHOWN="/etc/chown" # pathname of suitable chown program +#CMP="/bin/cmp" # pathname of suitable cmp program +#COL="/bin/col" # pathname of suitable col program +#CP="/bin/cp" # pathname of suitable cp program +#ECHO="/bin/echo" # pathname of suitable echo program +#GREP="/bin/grep" # pathname of suitable grep program +#LN="/bin/ln" # pathname of suitable ln program +#LN_S="-s" # option to ${LN} to create symlink +#MAN="/usr/bin/man" # pathname of suitable man program +MKDIR="/bin/mkdir -p" # pathname of suitable mkdir program +#MKFIFO="/bin/mkfifo" # pathname of suitable mkfifo program +#MV="/bin/mv" # pathname of suitable mv program +#MV_F="-f" # option to ${MV} to force operation +#RMCMD="/bin/rm" # pathname of suitable rm program +#SED="/bin/sed" # pathname of suitable sed program +#SCRIPT_SH="/bin/sh" # pathname of suitable shell +#SORT="/bin/sort" # pathname of suitable sort program diff --git a/network/hylafax/hylafax.SlackBuild b/network/hylafax/hylafax.SlackBuild new file mode 100644 index 0000000000..7c17482d2c --- /dev/null +++ b/network/hylafax/hylafax.SlackBuild @@ -0,0 +1,109 @@ +#!/bin/sh + +# Slackware build script for hylafax + +# Copyright 2007 David Somero <dsomero@hotmail.com> +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# 2007.08.07 +# Alan Hicks <alan@lizella.net> +# General script clean-up and minor improvements +# + +set -e + +PRGNAM=hylafax +VERSION=4.4.0 +ARCH=${ARCH:-i486} +BUILD=${BUILD:-1} +TAG=${TAG:-_SBo} +CWD=$(pwd) +TMP=${TMP:-/tmp/SBo} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +if [ "${ARCH}" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" +fi + +rm -rf ${PKG} +mkdir -p ${TMP} ${PKG} ${OUTPUT} +cd ${TMP} +rm -rf ${PRGNAM}-${VERSION} +tar -xvf ${CWD}/${PRGNAM}-${VERSION}.tar.gz + +cd ${PRGNAM}-${VERSION} +chown -R root:root . +chmod -R a-s,u+w,go+r-w . + +# Copy our source for the correct configuration +cp $CWD/config.local ${TMP}/${PRGNAM}-${VERSION}/config.local + +CFLAGS="${SLKCFLAGS}" \ +CXXFLAGS="${SLKCFLAGS}" \ +./configure \ + --nointeractive \ + --disable-pam \ + --with-optmizer=${CFLAGS} + +make +mkdir -p ${PKG}/etc/rc.d +make install ROOT=${PKG} + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a INSTALL COPYRIGHT CONTRIBUTORS README TODO VERSION doc/* $PKG/usr/doc/$PRGNAM-$VERSION +chmod -R a-w $PKG/usr/doc/$PRGNAM-$VERSION/* + +# We need to move the etc/rc.d/hylafax to the rc.hylafax file and make it executable. +mv ${PKG}/etc/rc.d/hylafax ${PKG}/etc/rc.d/rc.hylafax +chmod 755 ${PKG}/etc/rc.d/rc.hylafax + +( cd ${PKG} + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +) + +# Compress man pages +( cd ${PKG}/usr/man + find . -type f -exec gzip -9 {} \; + for i in $(find . -type l) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done +) + +cat ${CWD}/${PRGNAM}.SlackBuild > ${PKG}/usr/doc/${PRGNAM}-${VERSION}/${PRGNAM}.SlackBuild +cat ${CWD}/slack-desc > ${PKG}/usr/doc/${PRGNAM}-${VERSION}/slack-desc + +mkdir -p ${PKG}/install +cat ${CWD}/slack-desc > ${PKG}/install/slack-desc + +# add a configuration notice +cat << EOF >> ${PKG}/install/doinst.sh +# We warn about needed configuration to the /etc/inittab file. +echo "The following line will need be added to your /etc/inittab," +echo "please check if its the correct tty device for the modem, " +echo "and in case change it to the correct one." +echo " " +echo "m0:23:respawn:/usr/libexec/hylafax/faxgetty ttyS0" +# Hylafax faxgetty activation +EOF + +cd ${PKG} +/sbin/makepkg -l y -c n ${OUTPUT}/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.tgz diff --git a/network/hylafax/hylafax.info b/network/hylafax/hylafax.info new file mode 100644 index 0000000000..0c411a6380 --- /dev/null +++ b/network/hylafax/hylafax.info @@ -0,0 +1,8 @@ +PRGNAM="hylafax" +VERSION="4.4.0" +HOMEPAGE="http://www.hylafax.org" +DOWNLOAD="ftp://ftp.hylafax.org/source/hylafax-4.4.0.tar.gz" +MD5SUM="fa086c6654a6ccefb127ac0476101c25" +MAINTAINER="David Somero" +EMAIL="dsomero@hotmail.com " +APPROVED="Alan_Hicks" diff --git a/network/hylafax/slack-desc b/network/hylafax/slack-desc new file mode 100644 index 0000000000..1396618ae4 --- /dev/null +++ b/network/hylafax/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' on +# the right side marks the last column you can put a character in. You must make +# exactly 11 lines for the formatting to be correct. It's also customary to +# leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +hylafax: hylafax (enterprise-class fax system) +hylafax: +hylafax: HylaFAX+ +hylafax: Making the Premier Open-Source Fax Management System Even Better +hylafax: HylaFAX is an enterprise-class system for sending and receiving +hylafax: facsimiles as well as for sending alpha-numeric pages. +hylafax: +hylafax: If you expect to send more than a few facsimiles a day, +hylafax: then HylaFAX is the fax package for you! +hylafax: +hylafax: |