6 files changed, 244 insertions, 0 deletions
diff --git a/network/wifi-radar/README b/network/wifi-radar/README
new file mode 100644
index 0000000000..df36d8664b
--- /dev/null
+++ b/network/wifi-radar/README
@@ -0,0 +1,39 @@
+WiFi Radar is a Python utility for managing WiFi profiles.  It enables 
+you to scan for available networks and create profiles for your preferred 
+networks. At boot time, running WiFi Radar will automatically scan for an 
+available preferred network and connect to it. You can drag and drop your 
+preferred networks to arrange the profile priority.
+
+This requires pygtk, which in turn requires pygobject and pycairo, all of 
+which are also available at SlackBuilds.org
+
+This script installs a wifi-radar.sh script in /usr/bin that by default 
+runs /usr/sbin/wifi-radar with sudo.  You can change this to use ksudo 
+instead by running the script thusly:
+	./wifi-radar.SlackBuild KSUDO=yes
+
+To use wifi-radar with a normal user (with sudo) add to your /etc/sudoers:
+	%users   ALL = NOPASSWD: /usr/sbin/wifi-radar
+
+Then launch wifi-radar.sh, which will handle setting up a proper environment 
+and running /usr/sbin/wifi-radar.
+
+If you want to scan and connect to one of your preferred networks at
+boot, the recommended way is to add the following to /etc/rc.d/rc.local
+and make sure /etc/rc.d/rc.wifi-radar is executable.
+	if [ -x /etc/rc.d/rc.wifi-radar ]; then
+	  /etc/rc.d/rc.wifi-radar start
+	fi
+And of course, to rc.local_shutdown:
+	if [ -x /etc/rc.d/rc.wifi-radar ]; then
+	  /etc/rc.d/rc.wifi-radar stop
+	fi
+
+Please note that according to the manpage, wifi-radar is fairly power hungry 
+due to its constant scan nature.  You may not wish to have it running in the 
+background all the time sucking battery juice.
+
+Make sure /etc/wifi-radar/wifi-radar.conf is only readable by root (or perhaps
+the group that owns it in some cases).  We install the file with mode 0600 by
+default, but this was not the case in some earlier revisions, so you should
+double-check it to be sure.
diff --git a/network/wifi-radar/doinst.sh b/network/wifi-radar/doinst.sh
new file mode 100644
index 0000000000..1074af329f
--- /dev/null
+++ b/network/wifi-radar/doinst.sh
@@ -0,0 +1,32 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+if [ -x usr/bin/update-desktop-database ]; then
+  usr/bin/update-desktop-database usr/share/applications >/dev/null 2>&1
+fi
+
+# Keep same perms on rc.wifi-radar.new:
+if [ -e etc/rc.d/rc.wifi-radar ]; then
+  cp -a etc/rc.d/rc.wifi-radar etc/rc.d/rc.wifi-radar.new.incoming
+  cat etc/rc.d/rc.wifi-radar.new > etc/rc.d/rc.wifi-radar.new.incoming
+  mv etc/rc.d/rc.wifi-radar.new.incoming etc/rc.d/rc.wifi-radar.new
+fi
+
+config etc/wifi-radar/wifi-radar.conf.new
+config etc/rc.d/rc.wifi-radar.new
+
+echo "Remember to edit /etc/wifi-radar/wifi-radar.conf to suit your needs..."
+echo 
+echo "To use wifi-radar with a normal user (with sudo) add:"
+echo "%users   ALL = NOPASSWD: /usr/sbin/wifi-radar"
+echo "to /etc/sudoers, then launch wifi-radar.sh"
+echo
diff --git a/network/wifi-radar/rc.wifi-radar b/network/wifi-radar/rc.wifi-radar
new file mode 100644
index 0000000000..014d9d9bd9
--- /dev/null
+++ b/network/wifi-radar/rc.wifi-radar
@@ -0,0 +1,62 @@
+#!/bin/sh
+#
+# Start/Stop the WiFi-Radar daemon
+#
+
+# get the wifi interface from rc.inet1.conf if it is set
+. /etc/rc.d/rc.inet1.conf
+INTERFACE="${IFNAME[4]}"
+PIDFILE=/var/run/wifi.pid
+
+start() {
+  # use the forced interface found in rc.inet1.conf or guess it
+  [ ! "$INTERFACE" ] && INTERFACE="$(iwconfig 2>/dev/null | grep ESSID | head -n1 | cut -d " " -f 1)"
+  sed -i "s/^[ \t]*interface[ \t]*=[ \t]*.*/interface = $INTERFACE/" /etc/wifi-radar/wifi-radar.conf
+
+  if [ -e "${PIDFILE}" ]; then
+    echo "Found existing ${PIDFILE}! Stopping first before starting"
+    stop
+  fi
+  echo "Starting WiFi-Radar: "
+  /usr/sbin/wifi-radar --daemon 1> /dev/null 2> /dev/null &
+   ps -e | grep wifi-radar | cut -d" " -f2 > ${PIDFILE}
+}
+ 
+stop() {
+  echo "Stopping WiFi-Radar: "
+  if [ -e "${PIDFILE}" ]; then
+    kill $(cat ${PIDFILE}) 1> /dev/null 2> /dev/null
+    rm -f ${PIDFILE}
+  fi
+killall wifi-radar 1> /dev/null 2> /dev/null
+}
+ 
+restart() {
+  stop
+  sleep 2
+  start
+}
+ 
+status() {
+  if [ -e ${PIDFILE} ]; then
+    echo "The WiFi-Radar daemon is running."
+  else
+    echo "The WiFi-Radar daemon is not running"
+  fi
+}
+
+# See how we were called.
+case "$1" in
+    start)
+        start
+        ;;
+    stop)
+        stop
+        ;;
+    restart)
+        restart
+        ;;
+    *)
+        echo $"Usage: $0 {start|stop|restart}"
+        ;;
+esac
diff --git a/network/wifi-radar/slack-desc b/network/wifi-radar/slack-desc
new file mode 100644
index 0000000000..3c1b88852a
--- /dev/null
+++ b/network/wifi-radar/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+          |-----handy-ruler---------------------------------------------------|
+wifi-radar: Wifi Radar (Python/PyGTK2 utility for managing WiFi profiles)
+wifi-radar: 
+wifi-radar: WiFi Radar is a Python/PyGTK2 utility for managing WiFi profiles.
+wifi-radar: It enables you to scan for available networks and create profiles
+wifi-radar: for your preferred networks. At boot time, running WiFi Radar will
+wifi-radar: automatically scan for an available preferred network and connect 
+wifi-radar: to it.
+wifi-radar: 
+wifi-radar: 
+wifi-radar: 
+wifi-radar: 
diff --git a/network/wifi-radar/wifi-radar.SlackBuild b/network/wifi-radar/wifi-radar.SlackBuild
new file mode 100644
index 0000000000..38e94276e2
--- /dev/null
+++ b/network/wifi-radar/wifi-radar.SlackBuild
@@ -0,0 +1,84 @@
+#!/bin/sh
+# Slackware build script for Wifi-radar
+
+# Copyright 2006-2007  David Somero (dsomero@hotmail.com)
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=wifi-radar
+VERSION=${VERSION:-1.9.8}
+ARCH=noarch
+BUILD=${BUILD:-2}
+TAG=${TAG:-_SBo}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+KSUDO=${KSUDO:-no}
+
+set -e 
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2
+cd $PRGNAM-$VERSION
+
+chown -R root:root .
+chmod -R u+w,go+r-w,a-s .
+
+sed -i -e 's|etc/init.d|etc/rc.d|g' Makefile
+sed -i -e 's|auto_detect||g' wifi-radar.conf
+
+if [ $KSUDO = "yes" ]; then
+  sed -i -e 's|gksudo -S|kdesu|' -e '10d' wifi-radar.desktop
+else
+  sed -i -e 's|gksudo -S wifi-radar|wifi-radar.sh|' -e '10d' wifi-radar.desktop
+fi
+
+make 
+
+# Install everything manually
+install -D -m 0755 wifi-radar.localized   $PKG/usr/sbin/wifi-radar
+install -D -m 0644 wifi-radar.1           $PKG/usr/man/man1/wifi-radar.1
+install -D -m 0644 wifi-radar.conf.5      $PKG/usr/man/man5/wifi-radar.conf.5
+install -D -m 0755 $CWD/rc.wifi-radar   $PKG/etc/rc.d/rc.wifi-radar.new
+install -D -m 0644 pixmaps/wifi-radar.svg $PKG/usr/share/pixmaps/wifi-radar.svg
+install -D -m 0644 pixmaps/wifi-radar.png $PKG/usr/share/pixmaps/wifi-radar.png
+install -D -m 0644 wifi-radar.desktop     $PKG/usr/share/applications/wifi-radar.desktop 
+install -D -m 0644 $CWD/slack-desc      $PKG/install/slack-desc
+install -D -m 0744 $CWD/doinst.sh       $PKG/install/doinst.sh
+install -D -m 0600 wifi-radar.conf        $PKG/etc/wifi-radar/wifi-radar.conf.new
+install -D -m 0755 wifi-radar.sh          $PKG/usr/bin/wifi-radar.sh
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a README CHANGE.LOG INSTALL VERSION TODO COPYING CREDITS \
+  README.WPA-Mini-HOWTO.txt DEVELOPER_GUIDELINES $CWD/slack-desc \
+  $CWD/$PRGNAM.SlackBuild  $PKG/usr/doc/$PRGNAM-$VERSION
+
+( cd $PKG/usr/man
+  find . -type f -exec gzip -9 {} \;
+  for i in $(find . -type l) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+)
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz
diff --git a/network/wifi-radar/wifi-radar.info b/network/wifi-radar/wifi-radar.info
new file mode 100644
index 0000000000..e71d727bd4
--- /dev/null
+++ b/network/wifi-radar/wifi-radar.info
@@ -0,0 +1,8 @@
+PRGNAM="wifi-radar"
+VERSION="1.9.8"
+HOMEPAGE="http://wifi-radar.systemimager.org"
+DOWNLOAD="http://wifi-radar.systemimager.org/pub/wifi-radar-1.9.8.tar.bz2"
+MD5SUM="827cc9974298afefd143e9aaf15f95cc"
+MAINTAINER="David Somero"
+EMAIL="dsomero@hotmail.com "
+APPROVED="Alan_Hicks"