diff options
Diffstat (limited to 'network/tor/torrc')
| -rw-r--r-- | network/tor/torrc | 168 |
1 files changed, 168 insertions, 0 deletions
diff --git a/network/tor/torrc b/network/tor/torrc new file mode 100644 index 0000000000..577d169a3c --- /dev/null +++ b/network/tor/torrc @@ -0,0 +1,168 @@ +## Configuration file for a typical Tor user +## Last updated 12 April 2009 for Tor 0.2.1.14-rc. +## (May or may not work for much older or much newer versions of Tor.) +## +## Lines that begin with "## " try to explain what's going on. Lines +## that begin with just "#" are disabled commands: you can enable them +## by removing the "#" symbol. +## +## See 'man tor', or https://www.torproject.org/tor-manual.html, +## for more options you can use in this file. +## +## Tor will look for this file in various places based on your platform: +## https://wiki.torproject.org/noreply/TheOnionRouter/TorFAQ#torrc +## +## This is a custom Slackware torrc. The original Tor Project torrc file is +## still available as /etc/torrc/torrc.sample + + +## Replace this with "SocksPort 0" if you plan to run Tor only as a +## relay, and not make any local application connections yourself. +SocksPort 9050 # what port to open for local application connections +SocksListenAddress 127.0.0.1 # accept connections only from localhost +#SocksListenAddress 192.168.0.1:9100 # listen on this IP:port also + +## Entry policies to allow/deny SOCKS requests based on IP address. +## First entry that matches wins. If no SocksPolicy is set, we accept +## all (and only) requests from SocksListenAddress. +#SocksPolicy accept 192.168.0.0/16 +#SocksPolicy reject * + +## Logs go to stdout at level "notice" unless redirected by something +## else, like one of the below lines. You can have as many Log lines as +## you want. +## +## We advise using "notice" in most cases, since anything more verbose +## may provide sensitive information to an attacker who obtains the logs. +## +## Send all messages of level 'notice' or higher to /var/log/tor/tor.log +Log notice file /var/log/tor/tor.log +## Send all messages of level 'notice' or higher to /var/log/tor/notices.log +#Log notice file /var/log/tor/notices.log +## Send every possible message to /var/log/tor/debug.log +#Log debug file /var/log/tor/debug.log +## Use the system log instead of Tor's logfiles +#Log notice syslog +## To send all messages to stderr: +#Log debug stderr + +## Uncomment this to start the process in the background... or use +## --runasdaemon 1 on the command line. This is ignored on Windows; +## see the FAQ entry if you want Tor to run as an NT service. +RunAsDaemon 1 + +## The directory for keeping all the keys/etc. By default, we store +## things in $HOME/.tor on Unix, and in Application Data\tor on Windows. +DataDirectory /var/lib/tor + +## On startup, setuid to this user and setgid to their primary group. +User tor + +## On startup, write our PID to /var/run/tor/tor.pid. +## On clean shutdown, remove /var/run/tor/tor.pid. +PidFile /var/run/tor/tor.pid + +## The port on which Tor will listen for local connections from Tor +## controller applications, as documented in control-spec.txt. +#ControlPort 9051 +## If you enable the controlport, be sure to enable one of these +## authentication methods, to prevent attackers from accessing it. +#HashedControlPassword 16:872860B76453A77D60CA2BB8C1A7042072093276A3D701AD684053EC4C +#CookieAuthentication 1 + +############### This section is just for location-hidden services ### + +## Once you have configured a hidden service, you can look at the +## contents of the file ".../hidden_service/hostname" for the address +## to tell people. +## +## HiddenServicePort x y:z says to redirect requests on port x to the +## address y:z. + +#HiddenServiceDir /var/lib/tor/hidden_service/ +#HiddenServicePort 80 127.0.0.1:80 + +#HiddenServiceDir /var/lib/tor/other_hidden_service/ +#HiddenServicePort 80 127.0.0.1:80 +#HiddenServicePort 22 127.0.0.1:22 + +################ This section is just for relays ##################### +# +## See https://www.torproject.org/docs/tor-doc-relay for details. + +## Required: what port to advertise for incoming Tor connections. +#ORPort 9001 +## If you want to listen on a port other than the one advertised +## in ORPort (e.g. to advertise 443 but bind to 9090), uncomment the +## line below too. You'll need to do ipchains or other port forwarding +## yourself to make this work. +#ORListenAddress 0.0.0.0:9090 + +## A handle for your relay, so people don't have to refer to it by key. +#Nickname ididnteditheconfig + +## The IP address or full DNS name for your relay. Leave commented out +## and Tor will guess. +#Address noname.example.com + +## Define these to limit how much relayed traffic you will allow. Your +## own traffic is still unthrottled. Note that RelayBandwidthRate must +## be at least 20 KBytes. +#RelayBandwidthRate 100 KBytes # Throttle traffic to 100KB/s (800Kbps) +#RelayBandwidthBurst 200 KBytes # But allow bursts up to 200KB/s (1600Kbps) + +## Contact info to be published in the directory, so we can contact you +## if your relay is misconfigured or something else goes wrong. Google +## indexes this, so spammers might also collect it. +#ContactInfo Random Person <nobody AT example dot com> +## You might also include your PGP or GPG fingerprint if you have one: +#ContactInfo 1234D/FFFFFFFF Random Person <nobody AT example dot com> + +## Uncomment this to mirror directory information for others. Please do +## if you have enough bandwidth. +#DirPort 9030 # what port to advertise for directory connections +## If you want to listen on a port other than the one advertised +## in DirPort (e.g. to advertise 80 but bind to 9091), uncomment the line +## below too. You'll need to do ipchains or other port forwarding yourself +## to make this work. +#DirListenAddress 0.0.0.0:9091 +## Uncomment to return an arbitrary blob of html on your DirPort. Now you +## can explain what Tor is if anybody wonders why your IP address is +## contacting them. See contrib/tor-exit-notice.html for a sample. +#DirPortFrontPage /etc/tor/exit-notice.html + +## Uncomment this if you run more than one Tor relay, and add the identity +## key fingerprint of each Tor relay you control, even if they're on +## different networks. You declare it here so Tor clients can avoid +## using more than one of your relays in a single circuit. See +## https://wiki.torproject.org/noreply/TheOnionRouter/TorFAQ#MultipleServers +#MyFamily $keyid,$keyid,... + +## A comma-separated list of exit policies. They're considered first +## to last, and the first match wins. If you want to _replace_ +## the default exit policy, end this with either a reject *:* or an +## accept *:*. Otherwise, you're _augmenting_ (prepending to) the +## default exit policy. Leave commented to just use the default, which is +## described in the man page or at +## https://www.torproject.org/documentation.html +## +## Look at https://www.torproject.org/faq-abuse.html#TypicalAbuses +## for issues you might encounter if you use the default exit policy. +## +## If certain IPs and ports are blocked externally, e.g. by your firewall, +## you should update your exit policy to reflect this -- otherwise Tor +## users will be told that those destinations are down. +## +#ExitPolicy accept *:6660-6667,reject *:* # allow irc ports but no more +#ExitPolicy accept *:119 # accept nntp as well as default exit policy +#ExitPolicy reject *:* # no exits allowed +# +## Bridge relays (or "bridges") are Tor relays that aren't listed in the +## main directory. Since there is no complete public list of them, even if an +## ISP is filtering connections to all the known Tor relays, they probably +## won't be able to block all the bridges. Also, websites won't treat you +## differently because they won't know you're running Tor. If you can +## be a real relay, please do; but if not, be a bridge! +#BridgeRelay 1 +#ExitPolicy reject *:* + |