diff options
Diffstat (limited to 'network/hostapd/config')
| -rw-r--r-- | network/hostapd/config | 90 |
1 files changed, 90 insertions, 0 deletions
diff --git a/network/hostapd/config b/network/hostapd/config new file mode 100644 index 0000000000..d3b6ba0f2b --- /dev/null +++ b/network/hostapd/config @@ -0,0 +1,90 @@ +# Example hostapd build time configuration +# +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cass, these lines should use += in order not +# to override previous values of the variables. + +# Driver interface for Host AP driver +CONFIG_DRIVER_HOSTAP=y + +# Driver interface for wired authenticator +CONFIG_DRIVER_WIRED=y + +# Driver interface for madwifi driver +#CONFIG_DRIVER_MADWIFI=y +#CFLAGS += -I/tmp/SBo/madwifi-0.9.4/ # change to reflect local setup; directory for madwifi src + +# Driver interface for Prism54 driver +CONFIG_DRIVER_PRISM54=y + +# IEEE 802.11F/IAPP +CONFIG_IAPP=y + +# WPA2/IEEE 802.11i RSN pre-authentication +CONFIG_RSN_PREAUTH=y + +# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) +CONFIG_PEERKEY=y + +# IEEE 802.11w (management frame protection) +# This version is an experimental implementation based on IEEE 802.11w/D1.0 +# draft and is subject to change since the standard has not yet been finalized. +# Driver support is also needed for IEEE 802.11w. +CONFIG_IEEE80211W=y + +# Integrated EAP server +CONFIG_EAP=y + +# EAP-MD5 for the integrated EAP server +CONFIG_EAP_MD5=y + +# EAP-TLS for the integrated EAP server +CONFIG_EAP_TLS=y + +# EAP-MSCHAPv2 for the integrated EAP server +CONFIG_EAP_MSCHAPV2=y + +# EAP-PEAP for the integrated EAP server +CONFIG_EAP_PEAP=y + +# EAP-GTC for the integrated EAP server +CONFIG_EAP_GTC=y + +# EAP-TTLS for the integrated EAP server +CONFIG_EAP_TTLS=y + +# EAP-SIM for the integrated EAP server +CONFIG_EAP_SIM=y + +# EAP-AKA for the integrated EAP server +CONFIG_EAP_AKA=y + +# EAP-PAX for the integrated EAP server +CONFIG_EAP_PAX=y + +# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK) +CONFIG_EAP_PSK=y + +# EAP-SAKE for the integrated EAP server +CONFIG_EAP_SAKE=y + +# EAP-GPSK for the integrated EAP server +CONFIG_EAP_GPSK=y +# Include support for optional SHA256 cipher suite in EAP-GPSK +CONFIG_EAP_GPSK_SHA256=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# RADIUS authentication server. This provides access to the integrated EAP +# server from external hosts using RADIUS. +CONFIG_RADIUS_SERVER=y + +# Build IPv6 support for RADIUS operations +CONFIG_IPV6=y |