diff options
Diffstat (limited to 'misc/zaptel')
| -rw-r--r-- | misc/zaptel/README | 43 | ||||
| -rw-r--r-- | misc/zaptel/doinst.sh | 27 | ||||
| -rw-r--r-- | misc/zaptel/rc.zaptel | 209 | ||||
| -rw-r--r-- | misc/zaptel/slack-desc | 19 | ||||
| -rw-r--r-- | misc/zaptel/zaptel.SlackBuild | 88 | ||||
| -rw-r--r-- | misc/zaptel/zaptel.info | 8 |
6 files changed, 0 insertions, 394 deletions
diff --git a/misc/zaptel/README b/misc/zaptel/README deleted file mode 100644 index 8a4a745bf1..0000000000 --- a/misc/zaptel/README +++ /dev/null @@ -1,43 +0,0 @@ -The zaptel drivers and binaries are needed to use popular digital and -analogue telephony equipment and are typically installed alongside the -asterisk PBX (although these are not required for asterisk if you are -not using any hardware to interface with the POTS/PSTN system). Note -that if you change your kernel after installing zaptel, you'll have to -re-compile zaptel (a simple re-install will not suffice). - -The rc script included will handle loading and unloading kernel modules -for you. By default, it will attempt to load the wctdm module for the -common Digium cards, and if this fails, will load ztdummy to give you -a timing device. Simply edit the MODULES variable at the top of the -rc script to load other modules if your hardware requires it. These -modules should *not* be loaded in rc.local or rc.modules, but rather -here, as starting and stopping rc.zaptel will cause these modules to -re-read their config file if you make any changes. - -Users outside of North America may find that they need to edit the -zconfig.h file to specify their region's tones. This script does not -handle that at present. The statement you'll wish to change is: - #define DEFAULT_TONE_ZONE=0 - -The Asterisk Handbook First Edition lists the following zones: - 0 - North America - 1 - Australia - 2 - France - 7 - Japan - 14 - Taiwan -There are many others. Consult your documentation, or google. - -To start zaptel at system boot, do the following: - # chmod +x /etc/rc.d/rc.zaptel - -Also, you'll need to add a statement such as the following to rc.local: - if [ -x /etc/rc.d/rc.zaptel ]; then - /etc/rc.d/rc.zaptel start - fi - -rc.zaptel will create a lockfile that is removed when the service is -stopped using this script. Thus, you should probably put this in -rc.local_shutdown: - if [ -x /etc/rc.d/rc.zaptel ]; then - /etc/rc.d/rc.zaptel stop - fi diff --git a/misc/zaptel/doinst.sh b/misc/zaptel/doinst.sh deleted file mode 100644 index c3cebabe6b..0000000000 --- a/misc/zaptel/doinst.sh +++ /dev/null @@ -1,27 +0,0 @@ -#!/bin/sh - -config() { - NEW="$1" - OLD="$(dirname $NEW)/$(basename $NEW .new)" - # If there's no config file by that name, mv it over: - if [ ! -r $OLD ]; then - mv $NEW $OLD - elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy - rm $NEW - fi - # Otherwise, we leave the .new copy for the admin to consider... -} - -# Keep same perms on rc.zaptel.new: -if [ -e etc/rc.d/rc.zaptel ]; then - cp -a etc/rc.d/rc.zaptel etc/rc.d/rc.zaptel.new.incoming - cat etc/rc.d/rc.zaptel.new > etc/rc.d/rc.zaptel.new.incoming - mv etc/rc.d/rc.zaptel.new.incoming etc/rc.d/rc.zaptel.new -fi - -config etc/rc.d/rc.zaptel.new -config etc/zaptel.conf.new - -# Since we're creating kernel modules, this is necessary -chroot . depmod -a 2>/dev/null - diff --git a/misc/zaptel/rc.zaptel b/misc/zaptel/rc.zaptel deleted file mode 100644 index 1ab703e7ab..0000000000 --- a/misc/zaptel/rc.zaptel +++ /dev/null @@ -1,209 +0,0 @@ -#!/bin/sh -# -# This shell script takes care of loading and unloading -# Zapata Telephony interfaces -# -# This script is a heavily modified version of zaptel.init found -# in the zaptel source archive and thus is covered under the GNU -# General Public License version 2. -# -# Some parts Copyright 2007, Alan Hicks, Lizella, GA -# - -# What modules should we try to load on 'start'? By default, we'll -# attempt to load the driver for the popular Digium WildCat cards. If -# this fails or no modules are specified, the ztdummy module will be -# automatically loaded to provide a timing mechanism in the kernel. -# If you need some other modules loaded, seperate them with spaces. -# MODULES="foo bar" -MODULES="wctdm" - -ZTCFG_CMD=/sbin/ztcfg -FXOTUNE=/sbin/fxotune -LOCKFILE=/var/lock/subsys/zaptel - -# The default syncer Astribank. Usually set automatically to a sane -# value by xpp_sync(1) if you have an Astribank. You can set this to an -# explicit Astribank (e.g: 01). -XPP_SYNC=auto - -# The maximal timeout (seconds) to wait for udevd to finish generating -# device nodes after the modules have loaded and before running ztcfg. -ZAP_DEV_TIMEOUT=20 - -##################################################################### -## ## -## NOTHING BELOW HERE SHOULD NEED TO BE CHANGED ## -## ## -##################################################################### - -# recursively unload a module and its dependencies, if possible. -# For some reason, modprobe can't seem to remove these modules -# on its own, so we kludge this here. -# inputs: module to unload. -# returns: the result from -unload_module() { - module="$1" - line=$(lsmod 2>/dev/null | grep "^$1 ") - if [ "$line" = '' ]; then return; fi # module was not loaded - - set -- $line - # $1: the original module, $2: size, $3: refcount, $4: deps list - mods=$(echo $4 | tr , ' ') - # xpp_usb keeps the xpds below busy if an xpp hardware is - # connected. Hence must be removed before them: - case "$module" in xpd_*) mods="xpp_usb $mods";; esac - for mod in $mods; do - # run in a subshell, so it won't step over our vars: - (unload_module $mod) - # TODO: the following is probably the error handling we want: - # if [ $? != 0 ]; then return 1; fi - done - rmmod $module -} - -# I have not tested this function in the least, so I cannot say if it -# works properly with Slackware or not. If you can, please test this -# and report back any problems or successes you may have so we can fix -# this in the SlackBuild script. With that said, I don't see any reason -# why this function would not work. -# -- Alan Hicks -hpec_start() { - # HPEC license found - if ! echo /var/lib/digium/licenses/HPEC-*.lic | grep -v '\*' | grep -q .; then - return - fi - - # zaphpec_enable not installed in /usr/sbin - if [ ! -f /usr/sbin/zaphpec_enable ]; then - echo -n "Running zaphpec_enable: Failed" - echo -n "." - echo " The zaphpec_enable binary is not installed in /usr/sbin." - return - fi - - # zaphpec_enable not set executable - if [ ! -x /usr/sbin/zaphpec_enable ]; then - echo -n "Running zaphpec_enable: Failed" - echo -n "." - echo " /usr/sbin/zaphpec_enable is not set as executable." - return - fi - - # zaphpec_enable properly installed - action "Running zaphpec_enable: " /usr/sbin/zaphpec_enable - if [ $? = 0 ]; then - echo -n "done" - echo "." - else - echo -n "Failed" - echo -n "." - echo " This can be caused if you had already run zaphpec_enable, or if your HPEC license is no longer valid." - fi -} - - -# Check that telephony is up. -#[ "${TELEPHONY}" = "yes" ] || exit 0 - -if [ ! -f /etc/zaptel.conf ]; then - echo "Could not find /etc/zaptel.conf! Abandon ship!" - exit 1 -fi - -if [ "${DEBUG}" = "yes" ]; then - ARGS="debug=1" -fi - -RETVAL=0 - -# See how we were called. -case "$1" in - start) - # Load drivers - rmmod wcusb 2> /dev/null - rmmod wcfxsusb 2> /dev/null - rmmod audio 2> /dev/null - - echo "Loading zaptel framework: " - modprobe zaptel ${ARGS} - - echo -n "Waiting for zap to come online..." - TMOUT=$ZAP_DEV_TIMEOUT # max secs to wait - while [ ! -d /dev/zap ] ; do - echo -n "$TMOUT " - sleep 1 - TMOUT=$(expr $TMOUT - 1) - if [ $TMOUT -eq 0 ] ; then - echo " " # line break - echo "Error: missing /dev/zap!" - exit 1 - fi - done - echo "OK" - echo -n "Loading zaptel hardware modules:" - for x in $MODULES; do - if modprobe ${x} ${ARGS} 2> /dev/null; then - echo "Loaded module: ${x}." - fi - done - sleep 3 # TODO: remove it - - if [ ! -e /proc/zaptel/1 ]; then - echo "No functioning zap hardware found in /proc/zaptel, loading ztdummy" - modprobe ztdummy 2> /dev/null - fi - - echo "Running ztcfg: " - $ZTCFG_CMD 2> /dev/null - RETVAL=$? - - if [ $RETVAL -eq 0 ]; then - touch $LOCKFILE - else - echo "Something went wrong. Try running ztcfg -vvv." - fi - - # This is allowed to fail (or not even run). These files may not - # be present, and aren't required for Asterisk. - if [ -x "$FXOTUNE" ] && [ -r /etc/fxotune.conf ]; then - $FXOTUNE -s || : - fi - - hpec_start - ;; - stop) - # Unload drivers - echo -n "Unloading zaptel hardware drivers:" - unload_module zaptel - RETVAL=$? - echo "." - - [ $RETVAL -eq 0 ] && rm -f $LOCKFILE - ;; - unload) - # We don't have zaptel helper, so let's not replicate too much code: - # allow others to use the unload command. - unload_module zaptel - ;; - restart) - $0 stop - $0 start - ;; - reload) - echo "Reloading ztcfg: " - if $ZTCFG_CMD 2> /dev/null; then - echo -n "done" - RETVAL=0 - else - echo "ztcfg failed. Are your modules loaded?" - RETVAL=1 - fi - ;; - *) - echo "Usage: zaptel {start|stop|restart|reload}" - exit 1 -esac - -exit $RETVAL - diff --git a/misc/zaptel/slack-desc b/misc/zaptel/slack-desc deleted file mode 100644 index d40f9842a2..0000000000 --- a/misc/zaptel/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -zaptel: Zaptel (zaptel drivers) -zaptel: -zaptel: The zaptel drivers enable userland applications to interface with -zaptel: certain digital and analogue devices, primarily of use with the -zaptel: Asterisk PBX (Private Branch Exchange). -zaptel: -zaptel: -zaptel: -zaptel: -zaptel: -zaptel: diff --git a/misc/zaptel/zaptel.SlackBuild b/misc/zaptel/zaptel.SlackBuild deleted file mode 100644 index 6649e1e99c..0000000000 --- a/misc/zaptel/zaptel.SlackBuild +++ /dev/null @@ -1,88 +0,0 @@ -#!/bin/bash -# Copyright 2006, Alan Hicks, Lizella, GA -# All rights reserved. -# -# Redistribution and use of this script, with or without modification, is -# permitted provided that the following conditions are met: -# -# 1. Redistributions of this script must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO -# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -# Modified by Robby Workman <rworkman@slackbuilds.org> with a few things -# related to udev rules and such - -set -e - -PRGNAM="zaptel" -VERSION="1.4.12.1" -ARCH=${ARCH:-i486} -BUILD=${BUILD:-1} -TAG=${TAG:-_SBo} - -CWD=$(pwd) -TMP=${TMP:-/tmp/SBo} -PKG="$TMP/package-$PRGNAM" -OUTPUT=${OUTPUT:-/tmp} - -rm -rf $PKG $TMP/$PRGNAM-$VERSION -mkdir -p $TMP $PKG $OUTPUT -cd $TMP -tar xvf $CWD/$PRGNAM-$VERSION.tar.gz -cd $PRGNAM-$VERSION -chown -R root:root . -chmod -R a-s,u+w,go+r-w . - -# There's no ./configure script here. "make" has to be run once to -# configure the system and even when everything is ok, make will -# exit with a non-zero status the first time. We have to kludge this -# so the script doesn't bail when called with "set -e". -make || true -make -make install DESTDIR=$PKG - -( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -) - -mkdir -p $PKG/install $PKG/usr/doc/$PRGNAM-$VERSION $PKG/etc/rc.d -cp -a ChangeLog LICENSE README* $PKG/usr/doc/$PRGNAM-$VERSION/ -cat $CWD/zaptel.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/zaptel.SlackBuild -find $PKG/usr/doc -type f -exec chmod 0644 {} \; -chown -R root:root $PKG/usr/doc - -# Fix up the manpages -mv $PKG/usr/share/man $PKG/usr/man -gzip -9 $PKG/usr/man/man?/*.? - -# Add this directory. zaptel/asterisk will complain if it -# is not present -mkdir -p $PKG/var/lock/subsys - -# Don't clobber config file and init script -mv $PKG/etc/zaptel.conf $PKG/etc/zaptel.conf.new -install -m 0755 $CWD/rc.zaptel $PKG/etc/rc.d/rc.zaptel.new - -# udev handles device node creation -rm -fr $PKG/dev -# hotplug is dead -rm -rf $PKG/etc/hotplug -# rename udev rules file -mv $PKG/etc/udev/rules.d/xpp.rules $PKG/etc/udev/rules.d/96-xpp.rules - -cat $CWD/slack-desc > $PKG/install/slack-desc -cat $CWD/doinst.sh > $PKG/install/doinst.sh - -cd $PKG -/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz diff --git a/misc/zaptel/zaptel.info b/misc/zaptel/zaptel.info deleted file mode 100644 index 5fa40e94ee..0000000000 --- a/misc/zaptel/zaptel.info +++ /dev/null @@ -1,8 +0,0 @@ -PRGNAM="zaptel" -VERSION="1.4.12.1" -HOMEPAGE="http://www.digium.com" -DOWNLOAD="http://downloads.digium.com/pub/zaptel/zaptel-1.4.12.1.tar.gz" -MD5SUM="71e83a020b020fa60905edecf70e95a3" -MAINTAINER="Alan Hicks" -EMAIL="alan@lizella.net" -APPROVED="BP{k}" |