5 files changed, 158 insertions, 0 deletions
diff --git a/graphics/pr0ntools/README b/graphics/pr0ntools/README
new file mode 100644
index 0000000000..90745f50bb
--- /dev/null
+++ b/graphics/pr0ntools/README
@@ -0,0 +1,5 @@
+This is a collection of tools for automating tasks while learning about
+ICs. The most developed tools are related to image stitching and are
+certainly useful for more than just IC work.
+
+See stitch_README.txt for imaging stitching info.
diff --git a/graphics/pr0ntools/pr0ntools.SlackBuild b/graphics/pr0ntools/pr0ntools.SlackBuild
new file mode 100644
index 0000000000..7e93f5657a
--- /dev/null
+++ b/graphics/pr0ntools/pr0ntools.SlackBuild
@@ -0,0 +1,90 @@
+#!/bin/sh
+
+# Slackware build script for pr0ntools
+
+# Copyright 2016 Fernando Lopez Jr. <fernando.lopezjr@gmail.com>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=pr0ntools
+VERSION=${VERSION:-20170617}
+COMVER=3ce25e7e39cc195f3681a4d8d84633a2885b74da
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$COMVER
+tar xvf $CWD/$PRGNAM-$COMVER.tar.gz
+cd $PRGNAM-$COMVER
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+# lib path fix.
+patch -p0 --verbose < $CWD/setup.py.patch
+
+python setup.py install --root=$PKG
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a README COPYING TODO $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a stitch/README.txt $PKG/usr/doc/$PRGNAM-$VERSION/stitch_README.txt
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/graphics/pr0ntools/pr0ntools.info b/graphics/pr0ntools/pr0ntools.info
new file mode 100644
index 0000000000..490489155a
--- /dev/null
+++ b/graphics/pr0ntools/pr0ntools.info
@@ -0,0 +1,10 @@
+PRGNAM="pr0ntools"
+VERSION="20170617"
+HOMEPAGE="https://github.com/JohnDMcMaster/pr0ntools"
+DOWNLOAD="https://github.com/JohnDMcMaster/pr0ntools/archive/3ce25e7/pr0ntools-3ce25e7e39cc195f3681a4d8d84633a2885b74da.tar.gz"
+MD5SUM="39a78877c128b0efad52c760fa69854d"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="Fernando Lopez Jr."
+EMAIL="fernando.lopezjr@gmail.com"
diff --git a/graphics/pr0ntools/setup.py.patch b/graphics/pr0ntools/setup.py.patch
new file mode 100644
index 0000000000..0bebcf10ba
--- /dev/null
+++ b/graphics/pr0ntools/setup.py.patch
@@ -0,0 +1,34 @@
+--- setup.py	2017-06-17 09:13:43.000000000 -0600
++++ setup.py	2017-08-14 19:56:12.899404271 -0600
+@@ -9,15 +9,14 @@
+ 	description='Integrated circuit reverse engineering research and development',
+ 	long_description = long_description,
+ 	package_dir={
+-			'pr0ntools': 'lib/pr0ntools',
+-			'pr0ntools.image': 'lib/pr0ntools/image',
+-			'pr0ntools.jssim': 'lib/pr0ntools/jssim',
+-			'pr0ntools.jssim.cif': 'lib/pr0ntools/jssim/cif',
+-			'pr0ntools.jssim.files': 'lib/pr0ntools/jssim/files',
+-			'pr0ntools.stitch': 'lib/pr0ntools/stitch',
+-			'pr0ntools.stitch.pto': 'lib/pr0ntools/stitch/pto',
+-			'pr0ntools.tile': 'lib/pr0ntools/tile',
+-			'pr0ntools.util': 'lib/pr0ntools/util',
++			'pr0ntools': 'pr0ntools',
++			'pr0ntools.image': 'pr0ntools/image',
++			'pr0ntools.jssim': 'pr0ntools/jssim',
++			'pr0ntools.jssim.cif': 'pr0ntools/jssim/cif',
++			'pr0ntools.jssim.files': 'pr0ntools/jssim/files',
++			'pr0ntools.stitch': 'pr0ntools/stitch',
++			'pr0ntools.stitch.pto': 'pr0ntools/stitch/pto',
++			'pr0ntools.tile': 'pr0ntools/tile',
+ 			},
+ 	packages=[
+ 			'pr0ntools',
+@@ -28,7 +27,6 @@
+ 			'pr0ntools.stitch',
+ 			'pr0ntools.stitch.pto',
+ 			'pr0ntools.tile',
+-			'pr0ntools.util',
+ 			],
+ 	scripts=[
+ 			'stitch/pr0nhugin.py',
diff --git a/graphics/pr0ntools/slack-desc b/graphics/pr0ntools/slack-desc
new file mode 100644
index 0000000000..f9d6a13fcc
--- /dev/null
+++ b/graphics/pr0ntools/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+         |-----handy-ruler------------------------------------------------------|
+pr0ntools: pr0ntools (Integrated Circuit (IC) Reverse Engineering (RE) tools)
+pr0ntools:
+pr0ntools: This is a collection of tools for automating tasks while learning
+pr0ntools: about ICs.  The most developed tools are related to image stitching
+pr0ntools: and are certainly useful for more than just IC work.
+pr0ntools:
+pr0ntools:
+pr0ntools:
+pr0ntools:
+pr0ntools:
+pr0ntools: