diff options
| -rw-r--r-- | development/opendbx/README | 6 | ||||
| -rw-r--r-- | development/opendbx/inputname.diff | 2353 | ||||
| -rw-r--r-- | development/opendbx/odbxtest_exit_1_on_error.diff | 34 | ||||
| -rw-r--r-- | development/opendbx/opendbx.SlackBuild | 108 | ||||
| -rw-r--r-- | development/opendbx/opendbx.info | 10 | ||||
| -rw-r--r-- | development/opendbx/slack-desc | 19 | ||||
| -rw-r--r-- | development/opendbx/use_local_dtd.diff | 30 |
7 files changed, 2560 insertions, 0 deletions
diff --git a/development/opendbx/README b/development/opendbx/README new file mode 100644 index 0000000000..b3a89e99d4 --- /dev/null +++ b/development/opendbx/README @@ -0,0 +1,6 @@ +OpenDBX is an extremely lightweight but extensible database access +library written in C. It provides an abstraction layer to all supported +databases with a single, clean and simple interface that leads to an +elegant code design automatically. If you want your application to +support different databases with little effort, this is definitively +the right thing for you! diff --git a/development/opendbx/inputname.diff b/development/opendbx/inputname.diff new file mode 100644 index 0000000000..0ff88913e7 --- /dev/null +++ b/development/opendbx/inputname.diff @@ -0,0 +1,2353 @@ +See Debian BTS #759951 for details. + +Index: libopendbx-1.4.6/doc/Doxyfile.in +=================================================================== +--- libopendbx-1.4.6.orig/doc/Doxyfile.in 2014-09-05 13:15:23.097496657 -0400 ++++ libopendbx-1.4.6/doc/Doxyfile.in 2014-09-05 13:15:36.581497181 -0400 +@@ -1,16 +1,115 @@ +-# Doxyfile 1.5.6 ++# Doxyfile 1.8.6 ++ ++# This file describes the settings to be used by the documentation system ++# doxygen (www.doxygen.org) for a project. ++# ++# All text after a double hash (##) is considered a comment and is placed in ++# front of the TAG it is preceding. ++# ++# All text after a single hash (#) is considered a comment and will be ignored. ++# The format is: ++# TAG = value [value, ...] ++# For lists, items can also be appended using: ++# TAG += value [value, ...] ++# Values that contain spaces should be placed between quotes (\" \"). + + #--------------------------------------------------------------------------- + # Project related configuration options + #--------------------------------------------------------------------------- ++ ++# This tag specifies the encoding used for all characters in the config file ++# that follow. The default is UTF-8 which is also the encoding used for all text ++# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv ++# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv ++# for the list of possible encodings. ++# The default value is: UTF-8. ++ + DOXYFILE_ENCODING = UTF-8 ++ ++# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by ++# double-quotes, unless you are using Doxywizard) that should identify the ++# project for which the documentation is generated. This name is used in the ++# title of most generated pages and in a few other places. ++# The default value is: My Project. ++ + PROJECT_NAME = @PACKAGE@ ++ ++# The PROJECT_NUMBER tag can be used to enter a project or revision number. This ++# could be handy for archiving the generated documentation or if some version ++# control system is used. ++ + PROJECT_NUMBER = @VERSION@ ++ ++# Using the PROJECT_BRIEF tag one can provide an optional one line description ++# for a project that appears at the top of each page and should give viewer a ++# quick idea about the purpose of the project. Keep the description short. ++ ++PROJECT_BRIEF = ++ ++# With the PROJECT_LOGO tag one can specify an logo or icon that is included in ++# the documentation. The maximum height of the logo should not exceed 55 pixels ++# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo ++# to the output directory. ++ ++PROJECT_LOGO = ++ ++# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path ++# into which the generated documentation will be written. If a relative path is ++# entered, it will be relative to the location where doxygen was started. If ++# left blank the current directory will be used. ++ + OUTPUT_DIRECTORY = ./ ++ ++# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub- ++# directories (in 2 levels) under the output directory of each output format and ++# will distribute the generated files over these directories. Enabling this ++# option can be useful when feeding doxygen a huge amount of source files, where ++# putting all generated files in the same directory would otherwise causes ++# performance problems for the file system. ++# The default value is: NO. ++ + CREATE_SUBDIRS = NO ++ ++# The OUTPUT_LANGUAGE tag is used to specify the language in which all ++# documentation generated by doxygen is written. Doxygen will use this ++# information to generate all constant output in the proper language. ++# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, ++# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), ++# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, ++# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), ++# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, ++# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, ++# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, ++# Ukrainian and Vietnamese. ++# The default value is: English. ++ + OUTPUT_LANGUAGE = English ++ ++# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member ++# descriptions after the members that are listed in the file and class ++# documentation (similar to Javadoc). Set to NO to disable this. ++# The default value is: YES. ++ + BRIEF_MEMBER_DESC = YES ++ ++# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief ++# description of a member or function before the detailed description ++# ++# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the ++# brief descriptions will be completely suppressed. ++# The default value is: YES. ++ + REPEAT_BRIEF = YES ++ ++# This tag implements a quasi-intelligent brief description abbreviator that is ++# used to form the text in various listings. Each string in this list, if found ++# as the leading text of the brief description, will be stripped from the text ++# and the result, after processing the whole list, is used as the annotated ++# text. Otherwise, the brief description is used as-is. If left blank, the ++# following values are used ($name is automatically replaced with the name of ++# the entity):The $name class, The $name widget, The $name file, is, provides, ++# specifies, contains, represents, a, an and the. ++ + ABBREVIATE_BRIEF = "The $name class" \ + "The $name widget" \ + "The $name file" \ +@@ -22,79 +121,659 @@ + a \ + an \ + the ++ ++# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then ++# doxygen will generate a detailed section even if there is only a brief ++# description. ++# The default value is: NO. ++ + ALWAYS_DETAILED_SEC = NO ++ ++# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all ++# inherited members of a class in the documentation of that class as if those ++# members were ordinary class members. Constructors, destructors and assignment ++# operators of the base classes will not be shown. ++# The default value is: NO. ++ + INLINE_INHERITED_MEMB = YES ++ ++# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path ++# before files name in the file list and in the header files. If set to NO the ++# shortest path that makes the file name unique will be used ++# The default value is: YES. ++ + FULL_PATH_NAMES = YES ++ ++# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. ++# Stripping is only done if one of the specified strings matches the left-hand ++# part of the path. The tag can be used to show relative paths in the file list. ++# If left blank the directory from which doxygen is run is used as the path to ++# strip. ++# ++# Note that you can specify absolute paths here, but also relative paths, which ++# will be relative from the directory where doxygen is started. ++# This tag requires that the tag FULL_PATH_NAMES is set to YES. ++ + STRIP_FROM_PATH = ../lib ++ ++# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the ++# path mentioned in the documentation of a class, which tells the reader which ++# header file to include in order to use a class. If left blank only the name of ++# the header file containing the class definition is used. Otherwise one should ++# specify the list of include paths that are normally passed to the compiler ++# using the -I flag. ++ + STRIP_FROM_INC_PATH = ++ ++# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but ++# less readable) file names. This can be useful is your file systems doesn't ++# support long names like on DOS, Mac, or CD-ROM. ++# The default value is: NO. ++ + SHORT_NAMES = NO ++ ++# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the ++# first line (until the first dot) of a Javadoc-style comment as the brief ++# description. If set to NO, the Javadoc-style will behave just like regular Qt- ++# style comments (thus requiring an explicit @brief command for a brief ++# description.) ++# The default value is: NO. ++ + JAVADOC_AUTOBRIEF = YES ++ ++# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first ++# line (until the first dot) of a Qt-style comment as the brief description. If ++# set to NO, the Qt-style will behave just like regular Qt-style comments (thus ++# requiring an explicit \brief command for a brief description.) ++# The default value is: NO. ++ + QT_AUTOBRIEF = NO ++ ++# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a ++# multi-line C++ special comment block (i.e. a block of //! or /// comments) as ++# a brief description. This used to be the default behavior. The new default is ++# to treat a multi-line C++ comment block as a detailed description. Set this ++# tag to YES if you prefer the old behavior instead. ++# ++# Note that setting this tag to YES also means that rational rose comments are ++# not recognized any more. ++# The default value is: NO. ++ + MULTILINE_CPP_IS_BRIEF = NO ++ ++# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the ++# documentation from any documented member that it re-implements. ++# The default value is: YES. ++ + INHERIT_DOCS = YES ++ ++# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a ++# new page for each member. If set to NO, the documentation of a member will be ++# part of the file/class/namespace that contains it. ++# The default value is: NO. ++ + SEPARATE_MEMBER_PAGES = NO ++ ++# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen ++# uses this value to replace tabs by spaces in code fragments. ++# Minimum value: 1, maximum value: 16, default value: 4. ++ + TAB_SIZE = 4 ++ ++# This tag can be used to specify a number of aliases that act as commands in ++# the documentation. An alias has the form: ++# name=value ++# For example adding ++# "sideeffect=@par Side Effects:\n" ++# will allow you to put the command \sideeffect (or @sideeffect) in the ++# documentation, which will result in a user-defined paragraph with heading ++# "Side Effects:". You can put \n's in the value part of an alias to insert ++# newlines. ++ + ALIASES = ++ ++# This tag can be used to specify a number of word-keyword mappings (TCL only). ++# A mapping has the form "name=value". For example adding "class=itcl::class" ++# will allow you to use the command class in the itcl::class meaning. ++ ++TCL_SUBST = ++ ++# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources ++# only. Doxygen will then generate output that is more tailored for C. For ++# instance, some of the names that are used will be different. The list of all ++# members will be omitted, etc. ++# The default value is: NO. ++ + OPTIMIZE_OUTPUT_FOR_C = NO ++ ++# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or ++# Python sources only. Doxygen will then generate output that is more tailored ++# for that language. For instance, namespaces will be presented as packages, ++# qualified scopes will look different, etc. ++# The default value is: NO. ++ + OPTIMIZE_OUTPUT_JAVA = NO ++ ++# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran ++# sources. Doxygen will then generate output that is tailored for Fortran. ++# The default value is: NO. ++ + OPTIMIZE_FOR_FORTRAN = NO ++ ++# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL ++# sources. Doxygen will then generate output that is tailored for VHDL. ++# The default value is: NO. ++ + OPTIMIZE_OUTPUT_VHDL = NO ++ ++# Doxygen selects the parser to use depending on the extension of the files it ++# parses. With this tag you can assign which parser to use for a given ++# extension. Doxygen has a built-in mapping, but you can override or extend it ++# using this tag. The format is ext=language, where ext is a file extension, and ++# language is one of the parsers supported by doxygen: IDL, Java, Javascript, ++# C#, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL. For instance to make ++# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C ++# (default is Fortran), use: inc=Fortran f=C. ++# ++# Note For files without extension you can use no_extension as a placeholder. ++# ++# Note that for custom extensions you also need to set FILE_PATTERNS otherwise ++# the files are not read by doxygen. ++ ++EXTENSION_MAPPING = ++ ++# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments ++# according to the Markdown format, which allows for more readable ++# documentation. See http://daringfireball.net/projects/markdown/ for details. ++# The output of markdown processing is further processed by doxygen, so you can ++# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in ++# case of backward compatibilities issues. ++# The default value is: YES. ++ ++MARKDOWN_SUPPORT = YES ++ ++# When enabled doxygen tries to link words that correspond to documented ++# classes, or namespaces to their corresponding documentation. Such a link can ++# be prevented in individual cases by by putting a % sign in front of the word ++# or globally by setting AUTOLINK_SUPPORT to NO. ++# The default value is: YES. ++ ++AUTOLINK_SUPPORT = YES ++ ++# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want ++# to include (a tag file for) the STL sources as input, then you should set this ++# tag to YES in order to let doxygen match functions declarations and ++# definitions whose arguments contain STL classes (e.g. func(std::string); ++# versus func(std::string) {}). This also make the inheritance and collaboration ++# diagrams that involve STL classes more complete and accurate. ++# The default value is: NO. ++ + BUILTIN_STL_SUPPORT = NO ++ ++# If you use Microsoft's C++/CLI language, you should set this option to YES to ++# enable parsing support. ++# The default value is: NO. ++ + CPP_CLI_SUPPORT = NO ++ ++# Set the SIP_SUPPORT tag to YES if your project consists of sip (see: ++# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen ++# will parse them like normal C++ but will assume all classes use public instead ++# of private inheritance when no explicit protection keyword is present. ++# The default value is: NO. ++ + SIP_SUPPORT = NO ++ ++# For Microsoft's IDL there are propget and propput attributes to indicate ++# getter and setter methods for a property. Setting this option to YES will make ++# doxygen to replace the get and set methods by a property in the documentation. ++# This will only work if the methods are indeed getting or setting a simple ++# type. If this is not the case, or you want to show the methods anyway, you ++# should set this option to NO. ++# The default value is: YES. ++ + IDL_PROPERTY_SUPPORT = YES ++ ++# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC ++# tag is set to YES, then doxygen will reuse the documentation of the first ++# member in the group (if any) for the other members of the group. By default ++# all members of a group must be documented explicitly. ++# The default value is: NO. ++ + DISTRIBUTE_GROUP_DOC = NO ++ ++# Set the SUBGROUPING tag to YES to allow class member groups of the same type ++# (for instance a group of public functions) to be put as a subgroup of that ++# type (e.g. under the Public Functions section). Set it to NO to prevent ++# subgrouping. Alternatively, this can be done per class using the ++# \nosubgrouping command. ++# The default value is: YES. ++ + SUBGROUPING = YES ++ ++# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions ++# are shown inside the group in which they are included (e.g. using \ingroup) ++# instead of on a separate page (for HTML and Man pages) or section (for LaTeX ++# and RTF). ++# ++# Note that this feature does not work in combination with ++# SEPARATE_MEMBER_PAGES. ++# The default value is: NO. ++ ++INLINE_GROUPED_CLASSES = NO ++ ++# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions ++# with only public data fields or simple typedef fields will be shown inline in ++# the documentation of the scope in which they are defined (i.e. file, ++# namespace, or group documentation), provided this scope is documented. If set ++# to NO, structs, classes, and unions are shown on a separate page (for HTML and ++# Man pages) or section (for LaTeX and RTF). ++# The default value is: NO. ++ ++INLINE_SIMPLE_STRUCTS = NO ++ ++# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or ++# enum is documented as struct, union, or enum with the name of the typedef. So ++# typedef struct TypeS {} TypeT, will appear in the documentation as a struct ++# with name TypeT. When disabled the typedef will appear as a member of a file, ++# namespace, or class. And the struct will be named TypeS. This can typically be ++# useful for C code in case the coding convention dictates that all compound ++# types are typedef'ed and only the typedef is referenced, never the tag name. ++# The default value is: NO. ++ + TYPEDEF_HIDES_STRUCT = NO ++ ++# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This ++# cache is used to resolve symbols given their name and scope. Since this can be ++# an expensive process and often the same symbol appears multiple times in the ++# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small ++# doxygen will become slower. If the cache is too large, memory is wasted. The ++# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range ++# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 ++# symbols. At the end of a run doxygen will report the cache usage and suggest ++# the optimal cache size from a speed point of view. ++# Minimum value: 0, maximum value: 9, default value: 0. ++ ++LOOKUP_CACHE_SIZE = 0 ++ + #--------------------------------------------------------------------------- + # Build related configuration options + #--------------------------------------------------------------------------- ++ ++# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in ++# documentation are documented, even if no documentation was available. Private ++# class members and static file members will be hidden unless the ++# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. ++# Note: This will also disable the warnings about undocumented members that are ++# normally produced when WARNINGS is set to YES. ++# The default value is: NO. ++ + EXTRACT_ALL = NO ++ ++# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will ++# be included in the documentation. ++# The default value is: NO. ++ + EXTRACT_PRIVATE = NO ++ ++# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal ++# scope will be included in the documentation. ++# The default value is: NO. ++ ++EXTRACT_PACKAGE = NO ++ ++# If the EXTRACT_STATIC tag is set to YES all static members of a file will be ++# included in the documentation. ++# The default value is: NO. ++ + EXTRACT_STATIC = NO ++ ++# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined ++# locally in source files will be included in the documentation. If set to NO ++# only classes defined in header files are included. Does not have any effect ++# for Java sources. ++# The default value is: YES. ++ + EXTRACT_LOCAL_CLASSES = YES ++ ++# This flag is only useful for Objective-C code. When set to YES local methods, ++# which are defined in the implementation section but not in the interface are ++# included in the documentation. If set to NO only methods in the interface are ++# included. ++# The default value is: NO. ++ + EXTRACT_LOCAL_METHODS = NO ++ ++# If this flag is set to YES, the members of anonymous namespaces will be ++# extracted and appear in the documentation as a namespace called ++# 'anonymous_namespace{file}', where file will be replaced with the base name of ++# the file that contains the anonymous namespace. By default anonymous namespace ++# are hidden. ++# The default value is: NO. ++ + EXTRACT_ANON_NSPACES = NO ++ ++# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all ++# undocumented members inside documented classes or files. If set to NO these ++# members will be included in the various overviews, but no documentation ++# section is generated. This option has no effect if EXTRACT_ALL is enabled. ++# The default value is: NO. ++ + HIDE_UNDOC_MEMBERS = YES ++ ++# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all ++# undocumented classes that are normally visible in the class hierarchy. If set ++# to NO these classes will be included in the various overviews. This option has ++# no effect if EXTRACT_ALL is enabled. ++# The default value is: NO. ++ + HIDE_UNDOC_CLASSES = YES ++ ++# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend ++# (class|struct|union) declarations. If set to NO these declarations will be ++# included in the documentation. ++# The default value is: NO. ++ + HIDE_FRIEND_COMPOUNDS = NO ++ ++# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any ++# documentation blocks found inside the body of a function. If set to NO these ++# blocks will be appended to the function's detailed documentation block. ++# The default value is: NO. ++ + HIDE_IN_BODY_DOCS = NO ++ ++# The INTERNAL_DOCS tag determines if documentation that is typed after a ++# \internal command is included. If the tag is set to NO then the documentation ++# will be excluded. Set it to YES to include the internal documentation. ++# The default value is: NO. ++ + INTERNAL_DOCS = NO ++ ++# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file ++# names in lower-case letters. If set to YES upper-case letters are also ++# allowed. This is useful if you have classes or files whose names only differ ++# in case and if your file system supports case sensitive file names. Windows ++# and Mac users are advised to set this option to NO. ++# The default value is: system dependent. ++ + CASE_SENSE_NAMES = YES ++ ++# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with ++# their full class and namespace scopes in the documentation. If set to YES the ++# scope will be hidden. ++# The default value is: NO. ++ + HIDE_SCOPE_NAMES = NO ++ ++# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of ++# the files that are included by a file in the documentation of that file. ++# The default value is: YES. ++ + SHOW_INCLUDE_FILES = YES ++ ++# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each ++# grouped member an include statement to the documentation, telling the reader ++# which file to include in order to use the member. ++# The default value is: NO. ++ ++SHOW_GROUPED_MEMB_INC = NO ++ ++# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include ++# files with double quotes in the documentation rather than with sharp brackets. ++# The default value is: NO. ++ ++FORCE_LOCAL_INCLUDES = NO ++ ++# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the ++# documentation for inline members. ++# The default value is: YES. ++ + INLINE_INFO = YES ++ ++# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the ++# (detailed) documentation of file and class members alphabetically by member ++# name. If set to NO the members will appear in declaration order. ++# The default value is: YES. ++ + SORT_MEMBER_DOCS = YES ++ ++# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief ++# descriptions of file, namespace and class members alphabetically by member ++# name. If set to NO the members will appear in declaration order. Note that ++# this will also influence the order of the classes in the class list. ++# The default value is: NO. ++ + SORT_BRIEF_DOCS = YES ++ ++# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the ++# (brief and detailed) documentation of class members so that constructors and ++# destructors are listed first. If set to NO the constructors will appear in the ++# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. ++# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief ++# member documentation. ++# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting ++# detailed member documentation. ++# The default value is: NO. ++ ++SORT_MEMBERS_CTORS_1ST = NO ++ ++# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy ++# of group names into alphabetical order. If set to NO the group names will ++# appear in their defined order. ++# The default value is: NO. ++ + SORT_GROUP_NAMES = NO ++ ++# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by ++# fully-qualified names, including namespaces. If set to NO, the class list will ++# be sorted only by class name, not including the namespace part. ++# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. ++# Note: This option applies only to the class list, not to the alphabetical ++# list. ++# The default value is: NO. ++ + SORT_BY_SCOPE_NAME = NO ++ ++# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper ++# type resolution of all parameters of a function it will reject a match between ++# the prototype and the implementation of a member function even if there is ++# only one candidate or it is obvious which candidate to choose by doing a ++# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still ++# accept a match between prototype and implementation in such cases. ++# The default value is: NO. ++ ++STRICT_PROTO_MATCHING = NO ++ ++# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the ++# todo list. This list is created by putting \todo commands in the ++# documentation. ++# The default value is: YES. ++ + GENERATE_TODOLIST = YES ++ ++# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the ++# test list. This list is created by putting \test commands in the ++# documentation. ++# The default value is: YES. ++ + GENERATE_TESTLIST = YES ++ ++# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug ++# list. This list is created by putting \bug commands in the documentation. ++# The default value is: YES. ++ + GENERATE_BUGLIST = YES ++ ++# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO) ++# the deprecated list. This list is created by putting \deprecated commands in ++# the documentation. ++# The default value is: YES. ++ + GENERATE_DEPRECATEDLIST= YES ++ ++# The ENABLED_SECTIONS tag can be used to enable conditional documentation ++# sections, marked by \if <section_label> ... \endif and \cond <section_label> ++# ... \endcond blocks. ++ + ENABLED_SECTIONS = ++ ++# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the ++# initial value of a variable or macro / define can have for it to appear in the ++# documentation. If the initializer consists of more lines than specified here ++# it will be hidden. Use a value of 0 to hide initializers completely. The ++# appearance of the value of individual variables and macros / defines can be ++# controlled using \showinitializer or \hideinitializer command in the ++# documentation regardless of this setting. ++# Minimum value: 0, maximum value: 10000, default value: 30. ++ + MAX_INITIALIZER_LINES = 30 ++ ++# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at ++# the bottom of the documentation of classes and structs. If set to YES the list ++# will mention the files that were used to generate the documentation. ++# The default value is: YES. ++ + SHOW_USED_FILES = YES +-SHOW_DIRECTORIES = NO ++ ++# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This ++# will remove the Files entry from the Quick Index and from the Folder Tree View ++# (if specified). ++# The default value is: YES. ++ + SHOW_FILES = YES ++ ++# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces ++# page. This will remove the Namespaces entry from the Quick Index and from the ++# Folder Tree View (if specified). ++# The default value is: YES. ++ + SHOW_NAMESPACES = YES ++ ++# The FILE_VERSION_FILTER tag can be used to specify a program or script that ++# doxygen should invoke to get the current version for each file (typically from ++# the version control system). Doxygen will invoke the program by executing (via ++# popen()) the command command input-file, where command is the value of the ++# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided ++# by doxygen. Whatever the program writes to standard output is used as the file ++# version. For an example see the documentation. ++ + FILE_VERSION_FILTER = ++ ++# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed ++# by doxygen. The layout file controls the global structure of the generated ++# output files in an output format independent way. To create the layout file ++# that represents doxygen's defaults, run doxygen with the -l option. You can ++# optionally specify a file name after the option, if omitted DoxygenLayout.xml ++# will be used as the name of the layout file. ++# ++# Note that if you run doxygen from a directory containing a file called ++# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE ++# tag is left empty. ++ ++LAYOUT_FILE = ++ ++# The CITE_BIB_FILES tag can be used to specify one or more bib files containing ++# the reference definitions. This must be a list of .bib files. The .bib ++# extension is automatically appended if omitted. This requires the bibtex tool ++# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. ++# For LaTeX the style of the bibliography can be controlled using ++# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the ++# search path. Do not use file names with spaces, bibtex cannot handle them. See ++# also \cite for info how to create references. ++ ++CITE_BIB_FILES = ++ + #--------------------------------------------------------------------------- +-# configuration options related to warning and progress messages ++# Configuration options related to warning and progress messages + #--------------------------------------------------------------------------- ++ ++# The QUIET tag can be used to turn on/off the messages that are generated to ++# standard output by doxygen. If QUIET is set to YES this implies that the ++# messages are off. ++# The default value is: NO. ++ + QUIET = NO ++ ++# The WARNINGS tag can be used to turn on/off the warning messages that are ++# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES ++# this implies that the warnings are on. ++# ++# Tip: Turn warnings on while writing the documentation. ++# The default value is: YES. ++ + WARNINGS = YES ++ ++# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate ++# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag ++# will automatically be disabled. ++# The default value is: YES. ++ + WARN_IF_UNDOCUMENTED = YES ++ ++# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for ++# potential errors in the documentation, such as not documenting some parameters ++# in a documented function, or documenting parameters that don't exist or using ++# markup commands wrongly. ++# The default value is: YES. ++ + WARN_IF_DOC_ERROR = YES ++ ++# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that ++# are documented, but have no documentation for their parameters or return ++# value. If set to NO doxygen will only warn about wrong or incomplete parameter ++# documentation, but not about the absence of documentation. ++# The default value is: NO. ++ + WARN_NO_PARAMDOC = NO ++ ++# The WARN_FORMAT tag determines the format of the warning messages that doxygen ++# can produce. The string should contain the $file, $line, and $text tags, which ++# will be replaced by the file and line number from which the warning originated ++# and the warning text. Optionally the format may contain $version, which will ++# be replaced by the version of the file (if it could be obtained via ++# FILE_VERSION_FILTER) ++# The default value is: $file:$line: $text. ++ + WARN_FORMAT = "$file:$line: $text" ++ ++# The WARN_LOGFILE tag can be used to specify a file to which warning and error ++# messages should be written. If left blank the output is written to standard ++# error (stderr). ++ + WARN_LOGFILE = ++ + #--------------------------------------------------------------------------- +-# configuration options related to the input files ++# Configuration options related to the input files + #--------------------------------------------------------------------------- +-INPUT = ../lib/opendbx/api \ ++ ++# The INPUT tag is used to specify the files and/or directories that contain ++# documented source files. You may enter file names like myfile.cpp or ++# directories like /usr/src/myproject. Separate the files or directories with ++# spaces. ++# Note: If this tag is empty the current directory is searched. ++ ++INPUT = ../lib/opendbx/api.dox \ + ../lib/opendbx/api.h ++ ++# This tag can be used to specify the character encoding of the source files ++# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses ++# libiconv (or the iconv built into libc) for the transcoding. See the libiconv ++# documentation (see: http://www.gnu.org/software/libiconv) for the list of ++# possible encodings. ++# The default value is: UTF-8. ++ + INPUT_ENCODING = UTF-8 ++ ++# If the value of the INPUT tag contains directories, you can use the ++# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and ++# *.h) to filter out the source-files in the directories. If left blank the ++# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, ++# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, ++# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, ++# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, ++# *.qsf, *.as and *.js. ++ + FILE_PATTERNS = *.c \ + *.cc \ + *.cxx \ +@@ -144,161 +823,1540 @@ + *.F \ + *.VHD \ + *.VHDL ++ ++# The RECURSIVE tag can be used to specify whether or not subdirectories should ++# be searched for input files as well. ++# The default value is: NO. ++ + RECURSIVE = NO ++ ++# The EXCLUDE tag can be used to specify files and/or directories that should be ++# excluded from the INPUT source files. This way you can easily exclude a ++# subdirectory from a directory tree whose root is specified with the INPUT tag. ++# ++# Note that relative paths are relative to the directory from which doxygen is ++# run. ++ + EXCLUDE = ++ ++# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or ++# directories that are symbolic links (a Unix file system feature) are excluded ++# from the input. ++# The default value is: NO. ++ + EXCLUDE_SYMLINKS = NO ++ ++# If the value of the INPUT tag contains directories, you can use the ++# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude ++# certain files from those directories. ++# ++# Note that the wildcards are matched against the file with absolute path, so to ++# exclude all test directories for example use the pattern */test/* ++ + EXCLUDE_PATTERNS = ++ ++# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names ++# (namespaces, classes, functions, etc.) that should be excluded from the ++# output. The symbol name can be a fully qualified name, a word, or if the ++# wildcard * is used, a substring. Examples: ANamespace, AClass, ++# AClass::ANamespace, ANamespace::*Test ++# ++# Note that the wildcards are matched against the file with absolute path, so to ++# exclude all test directories use the pattern */test/* ++ + EXCLUDE_SYMBOLS = ++ ++# The EXAMPLE_PATH tag can be used to specify one or more files or directories ++# that contain example code fragments that are included (see the \include ++# command). ++ + EXAMPLE_PATH = ++ ++# If the value of the EXAMPLE_PATH tag contains directories, you can use the ++# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and ++# *.h) to filter out the source-files in the directories. If left blank all ++# files are included. ++ + EXAMPLE_PATTERNS = * ++ ++# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be ++# searched for input files to be used with the \include or \dontinclude commands ++# irrespective of the value of the RECURSIVE tag. ++# The default value is: NO. ++ + EXAMPLE_RECURSIVE = NO ++ ++# The IMAGE_PATH tag can be used to specify one or more files or directories ++# that contain images that are to be included in the documentation (see the ++# \image command). ++ + IMAGE_PATH = ++ ++# The INPUT_FILTER tag can be used to specify a program that doxygen should ++# invoke to filter for each input file. Doxygen will invoke the filter program ++# by executing (via popen()) the command: ++# ++# <filter> <input-file> ++# ++# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the ++# name of an input file. Doxygen will then use the output that the filter ++# program writes to standard output. If FILTER_PATTERNS is specified, this tag ++# will be ignored. ++# ++# Note that the filter must not add or remove lines; it is applied before the ++# code is scanned, but not when the output code is generated. If lines are added ++# or removed, the anchors will not be placed correctly. ++ + INPUT_FILTER = ++ ++# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern ++# basis. Doxygen will compare the file name with each pattern and apply the ++# filter if there is a match. The filters are a list of the form: pattern=filter ++# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how ++# filters are used. If the FILTER_PATTERNS tag is empty or if none of the ++# patterns match the file name, INPUT_FILTER is applied. ++ + FILTER_PATTERNS = ++ ++# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using ++# INPUT_FILTER ) will also be used to filter the input files that are used for ++# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). ++# The default value is: NO. ++ + FILTER_SOURCE_FILES = NO ++ ++# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file ++# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and ++# it is also possible to disable source filtering for a specific pattern using ++# *.ext= (so without naming a filter). ++# This tag requires that the tag FILTER_SOURCE_FILES is set to YES. ++ ++FILTER_SOURCE_PATTERNS = ++ ++# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that ++# is part of the input, its contents will be placed on the main page ++# (index.html). This can be useful if you have a project on for instance GitHub ++# and want to reuse the introduction page also for the doxygen output. ++ ++USE_MDFILE_AS_MAINPAGE = ++ + #--------------------------------------------------------------------------- +-# configuration options related to source browsing ++# Configuration options related to source browsing + #--------------------------------------------------------------------------- ++ ++# If the SOURCE_BROWSER tag is set to YES then a list of source files will be ++# generated. Documented entities will be cross-referenced with these sources. ++# ++# Note: To get rid of all source code in the generated output, make sure that ++# also VERBATIM_HEADERS is set to NO. ++# The default value is: NO. ++ + SOURCE_BROWSER = NO ++ ++# Setting the INLINE_SOURCES tag to YES will include the body of functions, ++# classes and enums directly into the documentation. ++# The default value is: NO. ++ + INLINE_SOURCES = NO ++ ++# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any ++# special comment blocks from generated source code fragments. Normal C, C++ and ++# Fortran comments will always remain visible. ++# The default value is: YES. ++ + STRIP_CODE_COMMENTS = YES ++ ++# If the REFERENCED_BY_RELATION tag is set to YES then for each documented ++# function all documented functions referencing it will be listed. ++# The default value is: NO. ++ + REFERENCED_BY_RELATION = NO ++ ++# If the REFERENCES_RELATION tag is set to YES then for each documented function ++# all documented entities called/used by that function will be listed. ++# The default value is: NO. ++ + REFERENCES_RELATION = NO ++ ++# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set ++# to YES, then the hyperlinks from functions in REFERENCES_RELATION and ++# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will ++# link to the documentation. ++# The default value is: YES. ++ + REFERENCES_LINK_SOURCE = YES ++ ++# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the ++# source code will show a tooltip with additional information such as prototype, ++# brief description and links to the definition and documentation. Since this ++# will make the HTML file larger and loading of large files a bit slower, you ++# can opt to disable this feature. ++# The default value is: YES. ++# This tag requires that the tag SOURCE_BROWSER is set to YES. ++ ++SOURCE_TOOLTIPS = YES ++ ++# If the USE_HTAGS tag is set to YES then the references to source code will ++# point to the HTML generated by the htags(1) tool instead of doxygen built-in ++# source browser. The htags tool is part of GNU's global source tagging system ++# (see http://www.gnu.org/software/global/global.html). You will need version ++# 4.8.6 or higher. ++# ++# To use it do the following: ++# - Install the latest version of global ++# - Enable SOURCE_BROWSER and USE_HTAGS in the config file ++# - Make sure the INPUT points to the root of the source tree ++# - Run doxygen as normal ++# ++# Doxygen will invoke htags (and that will in turn invoke gtags), so these ++# tools must be available from the command line (i.e. in the search path). ++# ++# The result: instead of the source browser generated by doxygen, the links to ++# source code will now point to the output of htags. ++# The default value is: NO. ++# This tag requires that the tag SOURCE_BROWSER is set to YES. ++ + USE_HTAGS = NO ++ ++# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a ++# verbatim copy of the header file for each class for which an include is ++# specified. Set to NO to disable this. ++# See also: Section \class. ++# The default value is: YES. ++ + VERBATIM_HEADERS = NO ++ + #--------------------------------------------------------------------------- +-# configuration options related to the alphabetical class index ++# Configuration options related to the alphabetical class index + #--------------------------------------------------------------------------- ++ ++# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all ++# compounds will be generated. Enable this if the project contains a lot of ++# classes, structs, unions or interfaces. ++# The default value is: YES. ++ + ALPHABETICAL_INDEX = NO ++ ++# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in ++# which the alphabetical index list will be split. ++# Minimum value: 1, maximum value: 20, default value: 5. ++# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. ++ + COLS_IN_ALPHA_INDEX = 5 ++ ++# In case all classes in a project start with a common prefix, all classes will ++# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag ++# can be used to specify a prefix (or a list of prefixes) that should be ignored ++# while generating the index headers. ++# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. ++ + IGNORE_PREFIX = ++ + #--------------------------------------------------------------------------- +-# configuration options related to the HTML output ++# Configuration options related to the HTML output + #--------------------------------------------------------------------------- ++ ++# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output ++# The default value is: YES. ++ + GENERATE_HTML = YES ++ ++# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a ++# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of ++# it. ++# The default directory is: html. ++# This tag requires that the tag GENERATE_HTML is set to YES. ++ + HTML_OUTPUT = html ++ ++# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each ++# generated HTML page (for example: .htm, .php, .asp). ++# The default value is: .html. ++# This tag requires that the tag GENERATE_HTML is set to YES. ++ + HTML_FILE_EXTENSION = .html ++ ++# The HTML_HEADER tag can be used to specify a user-defined HTML header file for ++# each generated HTML page. If the tag is left blank doxygen will generate a ++# standard header. ++# ++# To get valid HTML the header file that includes any scripts and style sheets ++# that doxygen needs, which is dependent on the configuration options used (e.g. ++# the setting GENERATE_TREEVIEW). It is highly recommended to start with a ++# default header using ++# doxygen -w html new_header.html new_footer.html new_stylesheet.css ++# YourConfigFile ++# and then modify the file new_header.html. See also section "Doxygen usage" ++# for information on how to generate the default header that doxygen normally ++# uses. ++# Note: The header is subject to change so you typically have to regenerate the ++# default header when upgrading to a newer version of doxygen. For a description ++# of the possible markers and block names see the documentation. ++# This tag requires that the tag GENERATE_HTML is set to YES. ++ + HTML_HEADER = ++ ++# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each ++# generated HTML page. If the tag is left blank doxygen will generate a standard ++# footer. See HTML_HEADER for more information on how to generate a default ++# footer and what special commands can be used inside the footer. See also ++# section "Doxygen usage" for information on how to generate the default footer ++# that doxygen normally uses. ++# This tag requires that the tag GENERATE_HTML is set to YES. ++ + HTML_FOOTER = ++ ++# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style ++# sheet that is used by each HTML page. It can be used to fine-tune the look of ++# the HTML output. If left blank doxygen will generate a default style sheet. ++# See also section "Doxygen usage" for information on how to generate the style ++# sheet that doxygen normally uses. ++# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as ++# it is more robust and this tag (HTML_STYLESHEET) will in the future become ++# obsolete. ++# This tag requires that the tag GENERATE_HTML is set to YES. ++ + HTML_STYLESHEET = +-HTML_ALIGN_MEMBERS = YES +-GENERATE_HTMLHELP = NO +-GENERATE_DOCSET = NO +-DOCSET_FEEDNAME = "Doxygen generated docs" +-DOCSET_BUNDLE_ID = org.doxygen.Project +-HTML_DYNAMIC_SECTIONS = NO +-CHM_FILE = +-HHC_LOCATION = +-GENERATE_CHI = NO +-CHM_INDEX_ENCODING = ++ ++# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional user- ++# defined cascading style sheet that is included after the standard style sheets ++# created by doxygen. Using this option one can overrule certain style aspects. ++# This is preferred over using HTML_STYLESHEET since it does not replace the ++# standard style sheet and is therefor more robust against future updates. ++# Doxygen will copy the style sheet file to the output directory. For an example ++# see the documentation. ++# This tag requires that the tag GENERATE_HTML is set to YES. ++ ++HTML_EXTRA_STYLESHEET = ++ ++# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or ++# other source files which should be copied to the HTML output directory. Note ++# that these files will be copied to the base HTML output directory. Use the ++# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these ++# files. In the HTML_STYLESHEET file, use the file name only. Also note that the ++# files will be copied as-is; there are no commands or markers available. ++# This tag requires that the tag GENERATE_HTML is set to YES. ++ ++HTML_EXTRA_FILES = ++ ++# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen ++# will adjust the colors in the stylesheet and background images according to ++# this color. Hue is specified as an angle on a colorwheel, see ++# http://en.wikipedia.org/wiki/Hue for more information. For instance the value ++# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 ++# purple, and 360 is red again. ++# Minimum value: 0, maximum value: 359, default value: 220. ++# This tag requires that the tag GENERATE_HTML is set to YES. ++ ++HTML_COLORSTYLE_HUE = 220 ++ ++# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors ++# in the HTML output. For a value of 0 the output will use grayscales only. A ++# value of 255 will produce the most vivid colors. ++# Minimum value: 0, maximum value: 255, default value: 100. ++# This tag requires that the tag GENERATE_HTML is set to YES. ++ ++HTML_COLORSTYLE_SAT = 100 ++ ++# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the ++# luminance component of the colors in the HTML output. Values below 100 ++# gradually make the output lighter, whereas values above 100 make the output ++# darker. The value divided by 100 is the actual gamma applied, so 80 represents ++# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not ++# change the gamma. ++# Minimum value: 40, maximum value: 240, default value: 80. ++# This tag requires that the tag GENERATE_HTML is set to YES. ++ ++HTML_COLORSTYLE_GAMMA = 80 ++ ++# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML ++# page will contain the date and time when the page was generated. Setting this ++# to NO can help when comparing the output of multiple runs. ++# The default value is: YES. ++# This tag requires that the tag GENERATE_HTML is set to YES. ++ ++HTML_TIMESTAMP = YES ++ ++# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML ++# documentation will contain sections that can be hidden and shown after the ++# page has loaded. ++# The default value is: NO. ++# This tag requires that the tag GENERATE_HTML is set to YES. ++ ++HTML_DYNAMIC_SECTIONS = NO ++ ++# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries ++# shown in the various tree structured indices initially; the user can expand ++# and collapse entries dynamically later on. Doxygen will expand the tree to ++# such a level that at most the specified number of entries are visible (unless ++# a fully collapsed tree already exceeds this amount). So setting the number of ++# entries 1 will produce a full collapsed tree by default. 0 is a special value ++# representing an infinite number of entries and will result in a full expanded ++# tree by default. ++# Minimum value: 0, maximum value: 9999, default value: 100. ++# This tag requires that the tag GENERATE_HTML is set to YES. ++ ++HTML_INDEX_NUM_ENTRIES = 100 ++ ++# If the GENERATE_DOCSET tag is set to YES, additional index files will be ++# generated that can be used as input for Apple's Xcode 3 integrated development ++# environment (see: http://developer.apple.com/tools/xcode/), introduced with ++# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a ++# Makefile in the HTML output directory. Running make will produce the docset in ++# that directory and running make install will install the docset in ++# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at ++# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html ++# for more information. ++# The default value is: NO. ++# This tag requires that the tag GENERATE_HTML is set to YES. ++ ++GENERATE_DOCSET = NO ++ ++# This tag determines the name of the docset feed. A documentation feed provides ++# an umbrella under which multiple documentation sets from a single provider ++# (such as a company or product suite) can be grouped. ++# The default value is: Doxygen generated docs. ++# This tag requires that the tag GENERATE_DOCSET is set to YES. ++ ++DOCSET_FEEDNAME = "Doxygen generated docs" ++ ++# This tag specifies a string that should uniquely identify the documentation ++# set bundle. This should be a reverse domain-name style string, e.g. ++# com.mycompany.MyDocSet. Doxygen will append .docset to the name. ++# The default value is: org.doxygen.Project. ++# This tag requires that the tag GENERATE_DOCSET is set to YES. ++ ++DOCSET_BUNDLE_ID = org.doxygen.Project ++ ++# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify ++# the documentation publisher. This should be a reverse domain-name style ++# string, e.g. com.mycompany.MyDocSet.documentation. ++# The default value is: org.doxygen.Publisher. ++# This tag requires that the tag GENERATE_DOCSET is set to YES. ++ ++DOCSET_PUBLISHER_ID = org.doxygen.Publisher ++ ++# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. ++# The default value is: Publisher. ++# This tag requires that the tag GENERATE_DOCSET is set to YES. ++ ++DOCSET_PUBLISHER_NAME = Publisher ++ ++# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three ++# additional HTML index files: index.hhp, index.hhc, and index.hhk. The ++# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop ++# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on ++# Windows. ++# ++# The HTML Help Workshop contains a compiler that can convert all HTML output ++# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML ++# files are now used as the Windows 98 help format, and will replace the old ++# Windows help format (.hlp) on all Windows platforms in the future. Compressed ++# HTML files also contain an index, a table of contents, and you can search for ++# words in the documentation. The HTML workshop also contains a viewer for ++# compressed HTML files. ++# The default value is: NO. ++# This tag requires that the tag GENERATE_HTML is set to YES. ++ ++GENERATE_HTMLHELP = NO ++ ++# The CHM_FILE tag can be used to specify the file name of the resulting .chm ++# file. You can add a path in front of the file if the result should not be ++# written to the html output directory. ++# This tag requires that the tag GENERATE_HTMLHELP is set to YES. ++ ++CHM_FILE = ++ ++# The HHC_LOCATION tag can be used to specify the location (absolute path ++# including file name) of the HTML help compiler ( hhc.exe). If non-empty ++# doxygen will try to run the HTML help compiler on the generated index.hhp. ++# The file has to be specified with full path. ++# This tag requires that the tag GENERATE_HTMLHELP is set to YES. ++ ++HHC_LOCATION = ++ ++# The GENERATE_CHI flag controls if a separate .chi index file is generated ( ++# YES) or that it should be included in the master .chm file ( NO). ++# The default value is: NO. ++# This tag requires that the tag GENERATE_HTMLHELP is set to YES. ++ ++GENERATE_CHI = NO ++ ++# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc) ++# and project file content. ++# This tag requires that the tag GENERATE_HTMLHELP is set to YES. ++ ++CHM_INDEX_ENCODING = ++ ++# The BINARY_TOC flag controls whether a binary table of contents is generated ( ++# YES) or a normal table of contents ( NO) in the .chm file. ++# The default value is: NO. ++# This tag requires that the tag GENERATE_HTMLHELP is set to YES. ++ + BINARY_TOC = NO ++ ++# The TOC_EXPAND flag can be set to YES to add extra items for group members to ++# the table of contents of the HTML help documentation and to the tree view. ++# The default value is: NO. ++# This tag requires that the tag GENERATE_HTMLHELP is set to YES. ++ + TOC_EXPAND = NO ++ ++# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and ++# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that ++# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help ++# (.qch) of the generated HTML documentation. ++# The default value is: NO. ++# This tag requires that the tag GENERATE_HTML is set to YES. ++ ++GENERATE_QHP = NO ++ ++# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify ++# the file name of the resulting .qch file. The path specified is relative to ++# the HTML output folder. ++# This tag requires that the tag GENERATE_QHP is set to YES. ++ ++QCH_FILE = ++ ++# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help ++# Project output. For more information please see Qt Help Project / Namespace ++# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). ++# The default value is: org.doxygen.Project. ++# This tag requires that the tag GENERATE_QHP is set to YES. ++ ++QHP_NAMESPACE = org.doxygen.Project ++ ++# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt ++# Help Project output. For more information please see Qt Help Project / Virtual ++# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- ++# folders). ++# The default value is: doc. ++# This tag requires that the tag GENERATE_QHP is set to YES. ++ ++QHP_VIRTUAL_FOLDER = doc ++ ++# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom ++# filter to add. For more information please see Qt Help Project / Custom ++# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- ++# filters). ++# This tag requires that the tag GENERATE_QHP is set to YES. ++ ++QHP_CUST_FILTER_NAME = ++ ++# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the ++# custom filter to add. For more information please see Qt Help Project / Custom ++# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- ++# filters). ++# This tag requires that the tag GENERATE_QHP is set to YES. ++ ++QHP_CUST_FILTER_ATTRS = ++ ++# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this ++# project's filter section matches. Qt Help Project / Filter Attributes (see: ++# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). ++# This tag requires that the tag GENERATE_QHP is set to YES. ++ ++QHP_SECT_FILTER_ATTRS = ++ ++# The QHG_LOCATION tag can be used to specify the location of Qt's ++# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the ++# generated .qhp file. ++# This tag requires that the tag GENERATE_QHP is set to YES. ++ ++QHG_LOCATION = ++ ++# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be ++# generated, together with the HTML files, they form an Eclipse help plugin. To ++# install this plugin and make it available under the help contents menu in ++# Eclipse, the contents of the directory containing the HTML and XML files needs ++# to be copied into the plugins directory of eclipse. The name of the directory ++# within the plugins directory should be the same as the ECLIPSE_DOC_ID value. ++# After copying Eclipse needs to be restarted before the help appears. ++# The default value is: NO. ++# This tag requires that the tag GENERATE_HTML is set to YES. ++ ++GENERATE_ECLIPSEHELP = NO ++ ++# A unique identifier for the Eclipse help plugin. When installing the plugin ++# the directory name containing the HTML and XML files should also have this ++# name. Each documentation set should have its own identifier. ++# The default value is: org.doxygen.Project. ++# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. ++ ++ECLIPSE_DOC_ID = org.doxygen.Project ++ ++# If you want full control over the layout of the generated HTML pages it might ++# be necessary to disable the index and replace it with your own. The ++# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top ++# of each HTML page. A value of NO enables the index and the value YES disables ++# it. Since the tabs in the index contain the same information as the navigation ++# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. ++# The default value is: NO. ++# This tag requires that the tag GENERATE_HTML is set to YES. ++ + DISABLE_INDEX = NO +-ENUM_VALUES_PER_LINE = 4 ++ ++# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index ++# structure should be generated to display hierarchical information. If the tag ++# value is set to YES, a side panel will be generated containing a tree-like ++# index structure (just like the one that is generated for HTML Help). For this ++# to work a browser that supports JavaScript, DHTML, CSS and frames is required ++# (i.e. any modern browser). Windows users are probably better off using the ++# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can ++# further fine-tune the look of the index. As an example, the default style ++# sheet generated by doxygen has an example that shows how to put an image at ++# the root of the tree instead of the PROJECT_NAME. Since the tree basically has ++# the same information as the tab index, you could consider setting ++# DISABLE_INDEX to YES when enabling this option. ++# The default value is: NO. ++# This tag requires that the tag GENERATE_HTML is set to YES. ++ + GENERATE_TREEVIEW = NONE ++ ++# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that ++# doxygen will group on one line in the generated HTML documentation. ++# ++# Note that a value of 0 will completely suppress the enum values from appearing ++# in the overview section. ++# Minimum value: 0, maximum value: 20, default value: 4. ++# This tag requires that the tag GENERATE_HTML is set to YES. ++ ++ENUM_VALUES_PER_LINE = 4 ++ ++# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used ++# to set the initial width (in pixels) of the frame in which the tree is shown. ++# Minimum value: 0, maximum value: 1500, default value: 250. ++# This tag requires that the tag GENERATE_HTML is set to YES. ++ + TREEVIEW_WIDTH = 250 ++ ++# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to ++# external symbols imported via tag files in a separate window. ++# The default value is: NO. ++# This tag requires that the tag GENERATE_HTML is set to YES. ++ ++EXT_LINKS_IN_WINDOW = NO ++ ++# Use this tag to change the font size of LaTeX formulas included as images in ++# the HTML documentation. When you change the font size after a successful ++# doxygen run you need to manually remove any form_*.png images from the HTML ++# output directory to force them to be regenerated. ++# Minimum value: 8, maximum value: 50, default value: 10. ++# This tag requires that the tag GENERATE_HTML is set to YES. ++ + FORMULA_FONTSIZE = 10 ++ ++# Use the FORMULA_TRANPARENT tag to determine whether or not the images ++# generated for formulas are transparent PNGs. Transparent PNGs are not ++# supported properly for IE 6.0, but are supported on all modern browsers. ++# ++# Note that when changing this option you need to delete any form_*.png files in ++# the HTML output directory before the changes have effect. ++# The default value is: YES. ++# This tag requires that the tag GENERATE_HTML is set to YES. ++ ++FORMULA_TRANSPARENT = YES ++ ++# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see ++# http://www.mathjax.org) which uses client side Javascript for the rendering ++# instead of using prerendered bitmaps. Use this if you do not have LaTeX ++# installed or if you want to formulas look prettier in the HTML output. When ++# enabled you may also need to install MathJax separately and configure the path ++# to it using the MATHJAX_RELPATH option. ++# The default value is: NO. ++# This tag requires that the tag GENERATE_HTML is set to YES. ++ ++USE_MATHJAX = NO ++ ++# When MathJax is enabled you can set the default output format to be used for ++# the MathJax output. See the MathJax site (see: ++# http://docs.mathjax.org/en/latest/output.html) for more details. ++# Possible values are: HTML-CSS (which is slower, but has the best ++# compatibility), NativeMML (i.e. MathML) and SVG. ++# The default value is: HTML-CSS. ++# This tag requires that the tag USE_MATHJAX is set to YES. ++ ++MATHJAX_FORMAT = HTML-CSS ++ ++# When MathJax is enabled you need to specify the location relative to the HTML ++# output directory using the MATHJAX_RELPATH option. The destination directory ++# should contain the MathJax.js script. For instance, if the mathjax directory ++# is located at the same level as the HTML output directory, then ++# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax ++# Content Delivery Network so you can quickly see the result without installing ++# MathJax. However, it is strongly recommended to install a local copy of ++# MathJax from http://www.mathjax.org before deployment. ++# The default value is: http://cdn.mathjax.org/mathjax/latest. ++# This tag requires that the tag USE_MATHJAX is set to YES. ++ ++MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest ++ ++# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax ++# extension names that should be enabled during MathJax rendering. For example ++# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols ++# This tag requires that the tag USE_MATHJAX is set to YES. ++ ++MATHJAX_EXTENSIONS = ++ ++# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces ++# of code that will be used on startup of the MathJax code. See the MathJax site ++# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an ++# example see the documentation. ++# This tag requires that the tag USE_MATHJAX is set to YES. ++ ++MATHJAX_CODEFILE = ++ ++# When the SEARCHENGINE tag is enabled doxygen will generate a search box for ++# the HTML output. The underlying search engine uses javascript and DHTML and ++# should work on any modern browser. Note that when using HTML help ++# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) ++# there is already a search function so this one should typically be disabled. ++# For large projects the javascript based search engine can be slow, then ++# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to ++# search using the keyboard; to jump to the search box use <access key> + S ++# (what the <access key> is depends on the OS and browser, but it is typically ++# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down ++# key> to jump into the search results window, the results can be navigated ++# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel ++# the search. The filter options can be selected when the cursor is inside the ++# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys> ++# to select a filter and <Enter> or <escape> to activate or cancel the filter ++# option. ++# The default value is: YES. ++# This tag requires that the tag GENERATE_HTML is set to YES. ++ ++SEARCHENGINE = NO ++ ++# When the SERVER_BASED_SEARCH tag is enabled the search engine will be ++# implemented using a web server instead of a web client using Javascript. There ++# are two flavours of web server based searching depending on the ++# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for ++# searching and an index file used by the script. When EXTERNAL_SEARCH is ++# enabled the indexing and searching needs to be provided by external tools. See ++# the section "External Indexing and Searching" for details. ++# The default value is: NO. ++# This tag requires that the tag SEARCHENGINE is set to YES. ++ ++SERVER_BASED_SEARCH = NO ++ ++# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP ++# script for searching. Instead the search results are written to an XML file ++# which needs to be processed by an external indexer. Doxygen will invoke an ++# external search engine pointed to by the SEARCHENGINE_URL option to obtain the ++# search results. ++# ++# Doxygen ships with an example indexer ( doxyindexer) and search engine ++# (doxysearch.cgi) which are based on the open source search engine library ++# Xapian (see: http://xapian.org/). ++# ++# See the section "External Indexing and Searching" for details. ++# The default value is: NO. ++# This tag requires that the tag SEARCHENGINE is set to YES. ++ ++EXTERNAL_SEARCH = NO ++ ++# The SEARCHENGINE_URL should point to a search engine hosted by a web server ++# which will return the search results when EXTERNAL_SEARCH is enabled. ++# ++# Doxygen ships with an example indexer ( doxyindexer) and search engine ++# (doxysearch.cgi) which are based on the open source search engine library ++# Xapian (see: http://xapian.org/). See the section "External Indexing and ++# Searching" for details. ++# This tag requires that the tag SEARCHENGINE is set to YES. ++ ++SEARCHENGINE_URL = ++ ++# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed ++# search data is written to a file for indexing by an external tool. With the ++# SEARCHDATA_FILE tag the name of this file can be specified. ++# The default file is: searchdata.xml. ++# This tag requires that the tag SEARCHENGINE is set to YES. ++ ++SEARCHDATA_FILE = searchdata.xml ++ ++# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the ++# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is ++# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple ++# projects and redirect the results back to the right project. ++# This tag requires that the tag SEARCHENGINE is set to YES. ++ ++EXTERNAL_SEARCH_ID = ++ ++# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen ++# projects other than the one defined by this configuration file, but that are ++# all added to the same external search index. Each project needs to have a ++# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of ++# to a relative location where the documentation can be found. The format is: ++# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ... ++# This tag requires that the tag SEARCHENGINE is set to YES. ++ ++EXTRA_SEARCH_MAPPINGS = ++ + #--------------------------------------------------------------------------- +-# configuration options related to the LaTeX output ++# Configuration options related to the LaTeX output + #--------------------------------------------------------------------------- ++ ++# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output. ++# The default value is: YES. ++ + GENERATE_LATEX = NO ++ ++# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a ++# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of ++# it. ++# The default directory is: latex. ++# This tag requires that the tag GENERATE_LATEX is set to YES. ++ + LATEX_OUTPUT = latex ++ ++# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be ++# invoked. ++# ++# Note that when enabling USE_PDFLATEX this option is only used for generating ++# bitmaps for formulas in the HTML output, but not in the Makefile that is ++# written to the output directory. ++# The default file is: latex. ++# This tag requires that the tag GENERATE_LATEX is set to YES. ++ + LATEX_CMD_NAME = latex ++ ++# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate ++# index for LaTeX. ++# The default file is: makeindex. ++# This tag requires that the tag GENERATE_LATEX is set to YES. ++ + MAKEINDEX_CMD_NAME = makeindex ++ ++# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX ++# documents. This may be useful for small projects and may help to save some ++# trees in general. ++# The default value is: NO. ++# This tag requires that the tag GENERATE_LATEX is set to YES. ++ + COMPACT_LATEX = NO ++ ++# The PAPER_TYPE tag can be used to set the paper type that is used by the ++# printer. ++# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x ++# 14 inches) and executive (7.25 x 10.5 inches). ++# The default value is: a4. ++# This tag requires that the tag GENERATE_LATEX is set to YES. ++ + PAPER_TYPE = a4wide ++ ++# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names ++# that should be included in the LaTeX output. To get the times font for ++# instance you can specify ++# EXTRA_PACKAGES=times ++# If left blank no extra packages will be included. ++# This tag requires that the tag GENERATE_LATEX is set to YES. ++ + EXTRA_PACKAGES = ++ ++# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the ++# generated LaTeX document. The header should contain everything until the first ++# chapter. If it is left blank doxygen will generate a standard header. See ++# section "Doxygen usage" for information on how to let doxygen write the ++# default header to a separate file. ++# ++# Note: Only use a user-defined header if you know what you are doing! The ++# following commands have a special meaning inside the header: $title, ++# $datetime, $date, $doxygenversion, $projectname, $projectnumber. Doxygen will ++# replace them by respectively the title of the page, the current date and time, ++# only the current date, the version number of doxygen, the project name (see ++# PROJECT_NAME), or the project number (see PROJECT_NUMBER). ++# This tag requires that the tag GENERATE_LATEX is set to YES. ++ + LATEX_HEADER = ++ ++# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the ++# generated LaTeX document. The footer should contain everything after the last ++# chapter. If it is left blank doxygen will generate a standard footer. ++# ++# Note: Only use a user-defined footer if you know what you are doing! ++# This tag requires that the tag GENERATE_LATEX is set to YES. ++ ++LATEX_FOOTER = ++ ++# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or ++# other source files which should be copied to the LATEX_OUTPUT output ++# directory. Note that the files will be copied as-is; there are no commands or ++# markers available. ++# This tag requires that the tag GENERATE_LATEX is set to YES. ++ ++LATEX_EXTRA_FILES = ++ ++# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is ++# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will ++# contain links (just like the HTML output) instead of page references. This ++# makes the output suitable for online browsing using a PDF viewer. ++# The default value is: YES. ++# This tag requires that the tag GENERATE_LATEX is set to YES. ++ + PDF_HYPERLINKS = YES ++ ++# If the LATEX_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate ++# the PDF file directly from the LaTeX files. Set this option to YES to get a ++# higher quality PDF documentation. ++# The default value is: YES. ++# This tag requires that the tag GENERATE_LATEX is set to YES. ++ + USE_PDFLATEX = YES ++ ++# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode ++# command to the generated LaTeX files. This will instruct LaTeX to keep running ++# if errors occur, instead of asking the user for help. This option is also used ++# when generating formulas in HTML. ++# The default value is: NO. ++# This tag requires that the tag GENERATE_LATEX is set to YES. ++ + LATEX_BATCHMODE = NO ++ ++# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the ++# index chapters (such as File Index, Compound Index, etc.) in the output. ++# The default value is: NO. ++# This tag requires that the tag GENERATE_LATEX is set to YES. ++ + LATEX_HIDE_INDICES = NO ++ ++# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source ++# code with syntax highlighting in the LaTeX output. ++# ++# Note that which sources are shown also depends on other settings such as ++# SOURCE_BROWSER. ++# The default value is: NO. ++# This tag requires that the tag GENERATE_LATEX is set to YES. ++ ++LATEX_SOURCE_CODE = NO ++ ++# The LATEX_BIB_STYLE tag can be used to specify the style to use for the ++# bibliography, e.g. plainnat, or ieeetr. See ++# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. ++# The default value is: plain. ++# This tag requires that the tag GENERATE_LATEX is set to YES. ++ ++LATEX_BIB_STYLE = plain ++ + #--------------------------------------------------------------------------- +-# configuration options related to the RTF output ++# Configuration options related to the RTF output + #--------------------------------------------------------------------------- ++ ++# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The ++# RTF output is optimized for Word 97 and may not look too pretty with other RTF ++# readers/editors. ++# The default value is: NO. ++ + GENERATE_RTF = NO ++ ++# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a ++# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of ++# it. ++# The default directory is: rtf. ++# This tag requires that the tag GENERATE_RTF is set to YES. ++ + RTF_OUTPUT = rtf ++ ++# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF ++# documents. This may be useful for small projects and may help to save some ++# trees in general. ++# The default value is: NO. ++# This tag requires that the tag GENERATE_RTF is set to YES. ++ + COMPACT_RTF = NO ++ ++# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will ++# contain hyperlink fields. The RTF file will contain links (just like the HTML ++# output) instead of page references. This makes the output suitable for online ++# browsing using Word or some other Word compatible readers that support those ++# fields. ++# ++# Note: WordPad (write) and others do not support links. ++# The default value is: NO. ++# This tag requires that the tag GENERATE_RTF is set to YES. ++ + RTF_HYPERLINKS = NO ++ ++# Load stylesheet definitions from file. Syntax is similar to doxygen's config ++# file, i.e. a series of assignments. You only have to provide replacements, ++# missing definitions are set to their default value. ++# ++# See also section "Doxygen usage" for information on how to generate the ++# default style sheet that doxygen normally uses. ++# This tag requires that the tag GENERATE_RTF is set to YES. ++ + RTF_STYLESHEET_FILE = ++ ++# Set optional variables used in the generation of an RTF document. Syntax is ++# similar to doxygen's config file. A template extensions file can be generated ++# using doxygen -e rtf extensionFile. ++# This tag requires that the tag GENERATE_RTF is set to YES. ++ + RTF_EXTENSIONS_FILE = ++ + #--------------------------------------------------------------------------- +-# configuration options related to the man page output ++# Configuration options related to the man page output + #--------------------------------------------------------------------------- ++ ++# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for ++# classes and files. ++# The default value is: NO. ++ + GENERATE_MAN = YES ++ ++# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a ++# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of ++# it. A directory man3 will be created inside the directory specified by ++# MAN_OUTPUT. ++# The default directory is: man. ++# This tag requires that the tag GENERATE_MAN is set to YES. ++ + MAN_OUTPUT = man ++ ++# The MAN_EXTENSION tag determines the extension that is added to the generated ++# man pages. In case the manual section does not start with a number, the number ++# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is ++# optional. ++# The default value is: .3. ++# This tag requires that the tag GENERATE_MAN is set to YES. ++ + MAN_EXTENSION = .3 ++ ++# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it ++# will generate one additional man file for each entity documented in the real ++# man page(s). These additional files only source the real man page, but without ++# them the man command would be unable to find the correct page. ++# The default value is: NO. ++# This tag requires that the tag GENERATE_MAN is set to YES. ++ + MAN_LINKS = NO ++ + #--------------------------------------------------------------------------- +-# configuration options related to the XML output ++# Configuration options related to the XML output + #--------------------------------------------------------------------------- ++ ++# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that ++# captures the structure of the code including all documentation. ++# The default value is: NO. ++ + GENERATE_XML = YES ++ ++# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a ++# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of ++# it. ++# The default directory is: xml. ++# This tag requires that the tag GENERATE_XML is set to YES. ++ + XML_OUTPUT = xml ++ ++# The XML_SCHEMA tag can be used to specify a XML schema, which can be used by a ++# validating XML parser to check the syntax of the XML files. ++# This tag requires that the tag GENERATE_XML is set to YES. ++ + XML_SCHEMA = ++ ++# The XML_DTD tag can be used to specify a XML DTD, which can be used by a ++# validating XML parser to check the syntax of the XML files. ++# This tag requires that the tag GENERATE_XML is set to YES. ++ + XML_DTD = ++ ++# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program ++# listings (including syntax highlighting and cross-referencing information) to ++# the XML output. Note that enabling this will significantly increase the size ++# of the XML output. ++# The default value is: YES. ++# This tag requires that the tag GENERATE_XML is set to YES. ++ + XML_PROGRAMLISTING = YES ++ + #--------------------------------------------------------------------------- +-# configuration options for the AutoGen Definitions output ++# Configuration options related to the DOCBOOK output + #--------------------------------------------------------------------------- ++ ++# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files ++# that can be used to generate PDF. ++# The default value is: NO. ++ ++GENERATE_DOCBOOK = NO ++ ++# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put. ++# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in ++# front of it. ++# The default directory is: docbook. ++# This tag requires that the tag GENERATE_DOCBOOK is set to YES. ++ ++DOCBOOK_OUTPUT = docbook ++ ++#--------------------------------------------------------------------------- ++# Configuration options for the AutoGen Definitions output ++#--------------------------------------------------------------------------- ++ ++# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen ++# Definitions (see http://autogen.sf.net) file that captures the structure of ++# the code including all documentation. Note that this feature is still ++# experimental and incomplete at the moment. ++# The default value is: NO. ++ + GENERATE_AUTOGEN_DEF = NO ++ + #--------------------------------------------------------------------------- +-# configuration options related to the Perl module output ++# Configuration options related to the Perl module output + #--------------------------------------------------------------------------- ++ ++# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module ++# file that captures the structure of the code including all documentation. ++# ++# Note that this feature is still experimental and incomplete at the moment. ++# The default value is: NO. ++ + GENERATE_PERLMOD = NO ++ ++# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary ++# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI ++# output from the Perl module output. ++# The default value is: NO. ++# This tag requires that the tag GENERATE_PERLMOD is set to YES. ++ + PERLMOD_LATEX = NO ++ ++# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely ++# formatted so it can be parsed by a human reader. This is useful if you want to ++# understand what is going on. On the other hand, if this tag is set to NO the ++# size of the Perl module output will be much smaller and Perl will parse it ++# just the same. ++# The default value is: YES. ++# This tag requires that the tag GENERATE_PERLMOD is set to YES. ++ + PERLMOD_PRETTY = YES ++ ++# The names of the make variables in the generated doxyrules.make file are ++# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful ++# so different doxyrules.make files included by the same Makefile don't ++# overwrite each other's variables. ++# This tag requires that the tag GENERATE_PERLMOD is set to YES. ++ + PERLMOD_MAKEVAR_PREFIX = ++ + #--------------------------------------------------------------------------- + # Configuration options related to the preprocessor + #--------------------------------------------------------------------------- ++ ++# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all ++# C-preprocessor directives found in the sources and include files. ++# The default value is: YES. ++ + ENABLE_PREPROCESSING = YES ++ ++# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names ++# in the source code. If set to NO only conditional compilation will be ++# performed. Macro expansion can be done in a controlled way by setting ++# EXPAND_ONLY_PREDEF to YES. ++# The default value is: NO. ++# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. ++ + MACRO_EXPANSION = NO ++ ++# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then ++# the macro expansion is limited to the macros specified with the PREDEFINED and ++# EXPAND_AS_DEFINED tags. ++# The default value is: NO. ++# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. ++ + EXPAND_ONLY_PREDEF = NO ++ ++# If the SEARCH_INCLUDES tag is set to YES the includes files in the ++# INCLUDE_PATH will be searched if a #include is found. ++# The default value is: YES. ++# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. ++ + SEARCH_INCLUDES = YES ++ ++# The INCLUDE_PATH tag can be used to specify one or more directories that ++# contain include files that are not input files but should be processed by the ++# preprocessor. ++# This tag requires that the tag SEARCH_INCLUDES is set to YES. ++ + INCLUDE_PATH = ++ ++# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard ++# patterns (like *.h and *.hpp) to filter out the header-files in the ++# directories. If left blank, the patterns specified with FILE_PATTERNS will be ++# used. ++# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. ++ + INCLUDE_FILE_PATTERNS = ++ ++# The PREDEFINED tag can be used to specify one or more macro names that are ++# defined before the preprocessor is started (similar to the -D option of e.g. ++# gcc). The argument of the tag is a list of macros of the form: name or ++# name=definition (no spaces). If the definition and the "=" are omitted, "=1" ++# is assumed. To prevent a macro definition from being undefined via #undef or ++# recursively expanded use the := operator instead of the = operator. ++# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. ++ + PREDEFINED = ++ ++# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this ++# tag can be used to specify a list of macro names that should be expanded. The ++# macro definition that is found in the sources will be used. Use the PREDEFINED ++# tag if you want to use a different macro definition that overrules the ++# definition found in the source code. ++# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. ++ + EXPAND_AS_DEFINED = ++ ++# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will ++# remove all refrences to function-like macros that are alone on a line, have an ++# all uppercase name, and do not end with a semicolon. Such function macros are ++# typically used for boiler-plate code, and will confuse the parser if not ++# removed. ++# The default value is: YES. ++# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. ++ + SKIP_FUNCTION_MACROS = YES ++ + #--------------------------------------------------------------------------- +-# Configuration::additions related to external references ++# Configuration options related to external references + #--------------------------------------------------------------------------- ++ ++# The TAGFILES tag can be used to specify one or more tag files. For each tag ++# file the location of the external documentation should be added. The format of ++# a tag file without this location is as follows: ++# TAGFILES = file1 file2 ... ++# Adding location for the tag files is done as follows: ++# TAGFILES = file1=loc1 "file2 = loc2" ... ++# where loc1 and loc2 can be relative or absolute paths or URLs. See the ++# section "Linking to external documentation" for more information about the use ++# of tag files. ++# Note: Each tag file must have an unique name (where the name does NOT include ++# the path). If a tag file is not located in the directory in which doxygen is ++# run, you must also specify the path to the tagfile here. ++ + TAGFILES = ++ ++# When a file name is specified after GENERATE_TAGFILE, doxygen will create a ++# tag file that is based on the input files it reads. See section "Linking to ++# external documentation" for more information about the usage of tag files. ++ + GENERATE_TAGFILE = ++ ++# If the ALLEXTERNALS tag is set to YES all external class will be listed in the ++# class index. If set to NO only the inherited external classes will be listed. ++# The default value is: NO. ++ + ALLEXTERNALS = NO ++ ++# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in ++# the modules index. If set to NO, only the current project's groups will be ++# listed. ++# The default value is: YES. ++ + EXTERNAL_GROUPS = YES ++ ++# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in ++# the related pages index. If set to NO, only the current project's pages will ++# be listed. ++# The default value is: YES. ++ ++EXTERNAL_PAGES = YES ++ ++# The PERL_PATH should be the absolute path and name of the perl script ++# interpreter (i.e. the result of 'which perl'). ++# The default file (with absolute path) is: /usr/bin/perl. ++ + PERL_PATH = /usr/bin/perl ++ + #--------------------------------------------------------------------------- + # Configuration options related to the dot tool + #--------------------------------------------------------------------------- ++ ++# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram ++# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to ++# NO turns the diagrams off. Note that this option also works with HAVE_DOT ++# disabled, but it is recommended to install and use dot, since it yields more ++# powerful graphs. ++# The default value is: YES. ++ + CLASS_DIAGRAMS = NO ++ ++# You can define message sequence charts within doxygen comments using the \msc ++# command. Doxygen will then run the mscgen tool (see: ++# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the ++# documentation. The MSCGEN_PATH tag allows you to specify the directory where ++# the mscgen tool resides. If left empty the tool is assumed to be found in the ++# default search path. ++ + MSCGEN_PATH = ++ ++# You can include diagrams made with dia in doxygen documentation. Doxygen will ++# then run dia to produce the diagram and insert it in the documentation. The ++# DIA_PATH tag allows you to specify the directory where the dia binary resides. ++# If left empty dia is assumed to be found in the default search path. ++ ++DIA_PATH = ++ ++# If set to YES, the inheritance and collaboration graphs will hide inheritance ++# and usage relations if the target is undocumented or is not a class. ++# The default value is: YES. ++ + HIDE_UNDOC_RELATIONS = YES ++ ++# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is ++# available from the path. This tool is part of Graphviz (see: ++# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent ++# Bell Labs. The other options in this section have no effect if this option is ++# set to NO ++# The default value is: NO. ++ + HAVE_DOT = NO ++ ++# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed ++# to run in parallel. When set to 0 doxygen will base this on the number of ++# processors available in the system. You can set it explicitly to a value ++# larger than 0 to get control over the balance between CPU load and processing ++# speed. ++# Minimum value: 0, maximum value: 32, default value: 0. ++# This tag requires that the tag HAVE_DOT is set to YES. ++ ++DOT_NUM_THREADS = 0 ++ ++# When you want a differently looking font n the dot files that doxygen ++# generates you can specify the font name using DOT_FONTNAME. You need to make ++# sure dot is able to find the font, which can be done by putting it in a ++# standard location or by setting the DOTFONTPATH environment variable or by ++# setting DOT_FONTPATH to the directory containing the font. ++# The default value is: Helvetica. ++# This tag requires that the tag HAVE_DOT is set to YES. ++ + DOT_FONTNAME = FreeSans ++ ++# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of ++# dot graphs. ++# Minimum value: 4, maximum value: 24, default value: 10. ++# This tag requires that the tag HAVE_DOT is set to YES. ++ ++DOT_FONTSIZE = 10 ++ ++# By default doxygen will tell dot to use the default font as specified with ++# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set ++# the path where dot can find it using this tag. ++# This tag requires that the tag HAVE_DOT is set to YES. ++ + DOT_FONTPATH = ++ ++# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for ++# each documented class showing the direct and indirect inheritance relations. ++# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO. ++# The default value is: YES. ++# This tag requires that the tag HAVE_DOT is set to YES. ++ + CLASS_GRAPH = YES ++ ++# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a ++# graph for each documented class showing the direct and indirect implementation ++# dependencies (inheritance, containment, and class references variables) of the ++# class with other documented classes. ++# The default value is: YES. ++# This tag requires that the tag HAVE_DOT is set to YES. ++ + COLLABORATION_GRAPH = YES ++ ++# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for ++# groups, showing the direct groups dependencies. ++# The default value is: YES. ++# This tag requires that the tag HAVE_DOT is set to YES. ++ + GROUP_GRAPHS = YES ++ ++# If the UML_LOOK tag is set to YES doxygen will generate inheritance and ++# collaboration diagrams in a style similar to the OMG's Unified Modeling ++# Language. ++# The default value is: NO. ++# This tag requires that the tag HAVE_DOT is set to YES. ++ + UML_LOOK = NO ++ ++# If the UML_LOOK tag is enabled, the fields and methods are shown inside the ++# class node. If there are many fields or methods and many nodes the graph may ++# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the ++# number of items for each type to make the size more manageable. Set this to 0 ++# for no limit. Note that the threshold may be exceeded by 50% before the limit ++# is enforced. So when you set the threshold to 10, up to 15 fields may appear, ++# but if the number exceeds 15, the total amount of fields shown is limited to ++# 10. ++# Minimum value: 0, maximum value: 100, default value: 10. ++# This tag requires that the tag HAVE_DOT is set to YES. ++ ++UML_LIMIT_NUM_FIELDS = 10 ++ ++# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and ++# collaboration graphs will show the relations between templates and their ++# instances. ++# The default value is: NO. ++# This tag requires that the tag HAVE_DOT is set to YES. ++ + TEMPLATE_RELATIONS = NO ++ ++# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to ++# YES then doxygen will generate a graph for each documented file showing the ++# direct and indirect include dependencies of the file with other documented ++# files. ++# The default value is: YES. ++# This tag requires that the tag HAVE_DOT is set to YES. ++ + INCLUDE_GRAPH = YES ++ ++# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are ++# set to YES then doxygen will generate a graph for each documented file showing ++# the direct and indirect include dependencies of the file with other documented ++# files. ++# The default value is: YES. ++# This tag requires that the tag HAVE_DOT is set to YES. ++ + INCLUDED_BY_GRAPH = YES ++ ++# If the CALL_GRAPH tag is set to YES then doxygen will generate a call ++# dependency graph for every global function or class method. ++# ++# Note that enabling this option will significantly increase the time of a run. ++# So in most cases it will be better to enable call graphs for selected ++# functions only using the \callgraph command. ++# The default value is: NO. ++# This tag requires that the tag HAVE_DOT is set to YES. ++ + CALL_GRAPH = NO ++ ++# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller ++# dependency graph for every global function or class method. ++# ++# Note that enabling this option will significantly increase the time of a run. ++# So in most cases it will be better to enable caller graphs for selected ++# functions only using the \callergraph command. ++# The default value is: NO. ++# This tag requires that the tag HAVE_DOT is set to YES. ++ + CALLER_GRAPH = NO ++ ++# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical ++# hierarchy of all classes instead of a textual one. ++# The default value is: YES. ++# This tag requires that the tag HAVE_DOT is set to YES. ++ + GRAPHICAL_HIERARCHY = YES ++ ++# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the ++# dependencies a directory has on other directories in a graphical way. The ++# dependency relations are determined by the #include relations between the ++# files in the directories. ++# The default value is: YES. ++# This tag requires that the tag HAVE_DOT is set to YES. ++ + DIRECTORY_GRAPH = YES ++ ++# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images ++# generated by dot. ++# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order ++# to make the SVG files visible in IE 9+ (other browsers do not have this ++# requirement). ++# Possible values are: png, jpg, gif and svg. ++# The default value is: png. ++# This tag requires that the tag HAVE_DOT is set to YES. ++ + DOT_IMAGE_FORMAT = png ++ ++# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to ++# enable generation of interactive SVG images that allow zooming and panning. ++# ++# Note that this requires a modern browser other than Internet Explorer. Tested ++# and working are Firefox, Chrome, Safari, and Opera. ++# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make ++# the SVG files visible. Older versions of IE do not have SVG support. ++# The default value is: NO. ++# This tag requires that the tag HAVE_DOT is set to YES. ++ ++INTERACTIVE_SVG = NO ++ ++# The DOT_PATH tag can be used to specify the path where the dot tool can be ++# found. If left blank, it is assumed the dot tool can be found in the path. ++# This tag requires that the tag HAVE_DOT is set to YES. ++ + DOT_PATH = ++ ++# The DOTFILE_DIRS tag can be used to specify one or more directories that ++# contain dot files that are included in the documentation (see the \dotfile ++# command). ++# This tag requires that the tag HAVE_DOT is set to YES. ++ + DOTFILE_DIRS = ++ ++# The MSCFILE_DIRS tag can be used to specify one or more directories that ++# contain msc files that are included in the documentation (see the \mscfile ++# command). ++ ++MSCFILE_DIRS = ++ ++# The DIAFILE_DIRS tag can be used to specify one or more directories that ++# contain dia files that are included in the documentation (see the \diafile ++# command). ++ ++DIAFILE_DIRS = ++ ++# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes ++# that will be shown in the graph. If the number of nodes in a graph becomes ++# larger than this value, doxygen will truncate the graph, which is visualized ++# by representing a node as a red box. Note that doxygen if the number of direct ++# children of the root node in a graph is already larger than ++# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that ++# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. ++# Minimum value: 0, maximum value: 10000, default value: 50. ++# This tag requires that the tag HAVE_DOT is set to YES. ++ + DOT_GRAPH_MAX_NODES = 50 ++ ++# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs ++# generated by dot. A depth value of 3 means that only nodes reachable from the ++# root by following a path via at most 3 edges will be shown. Nodes that lay ++# further from the root node will be omitted. Note that setting this option to 1 ++# or 2 may greatly reduce the computation time needed for large code bases. Also ++# note that the size of a graph can be further restricted by ++# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. ++# Minimum value: 0, maximum value: 1000, default value: 0. ++# This tag requires that the tag HAVE_DOT is set to YES. ++ + MAX_DOT_GRAPH_DEPTH = 1000 ++ ++# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent ++# background. This is disabled by default, because dot on Windows does not seem ++# to support this out of the box. ++# ++# Warning: Depending on the platform used, enabling this option may lead to ++# badly anti-aliased labels on the edges of a graph (i.e. they become hard to ++# read). ++# The default value is: NO. ++# This tag requires that the tag HAVE_DOT is set to YES. ++ + DOT_TRANSPARENT = YES ++ ++# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output ++# files in one run (i.e. multiple -o and -T options on the command line). This ++# makes dot run faster, but since only newer versions of dot (>1.8.10) support ++# this, this feature is disabled by default. ++# The default value is: NO. ++# This tag requires that the tag HAVE_DOT is set to YES. ++ + DOT_MULTI_TARGETS = NO ++ ++# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page ++# explaining the meaning of the various boxes and arrows in the dot generated ++# graphs. ++# The default value is: YES. ++# This tag requires that the tag HAVE_DOT is set to YES. ++ + GENERATE_LEGEND = YES ++ ++# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot ++# files that are used to generate the various graphs. ++# The default value is: YES. ++# This tag requires that the tag HAVE_DOT is set to YES. ++ + DOT_CLEANUP = YES +-#--------------------------------------------------------------------------- +-# Configuration::additions related to the search engine +-#--------------------------------------------------------------------------- +-SEARCHENGINE = NO diff --git a/development/opendbx/odbxtest_exit_1_on_error.diff b/development/opendbx/odbxtest_exit_1_on_error.diff new file mode 100644 index 0000000000..33881b4333 --- /dev/null +++ b/development/opendbx/odbxtest_exit_1_on_error.diff @@ -0,0 +1,34 @@ +This way if the test fails, the build will fail. +Need to send upstream. +Index: libopendbx-1.4.6/test/odbxtest.sh +=================================================================== +--- libopendbx-1.4.6.orig/test/odbxtest.sh 2012-05-06 08:10:59.000000000 -0400 ++++ libopendbx-1.4.6/test/odbxtest.sh 2012-11-19 12:21:05.468414873 -0500 +@@ -7,6 +7,7 @@ + if ! test -f odbxtest.site + then + echo "No odbxtest.site file found" ++ exit 1 + fi + + ODBXAPP="./odbxtest ./odbxplustest" +@@ -28,6 +29,7 @@ + echo "$1 ERRORS:" >> testresult.err + cat test.err >> testresult.err + diff -b test.out ref/$1.ref >> testresult.err ++ FAILURE="FAILED" + else + echo " $1 OK" + echo " $1 OK" >> testresult.log +@@ -154,5 +156,9 @@ + rm -f test.out + rm -f test.err + +- +-exit 0 ++if [ -n "$FAILURE" ] ++then ++ exit 1 ++else ++ exit 0 ++fi diff --git a/development/opendbx/opendbx.SlackBuild b/development/opendbx/opendbx.SlackBuild new file mode 100644 index 0000000000..68e1485b5a --- /dev/null +++ b/development/opendbx/opendbx.SlackBuild @@ -0,0 +1,108 @@ +#!/bin/sh + +# Slackware build script for OpenDBX + +# Copyright 2016 Eugene Wissner Dachau, Germany +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PRGNAM=opendbx +VERSION=${VERSION:-1.4.6} +BUILD=${BUILD:-1} +TAG=${TAG:-_SBo} + +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) ARCH=i586 ;; + arm*) ARCH=arm ;; + *) ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp/SBo} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +if [ "$ARCH" = "i586" ]; then + SLKCFLAGS="-O2 -march=i586 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +set -e + +rm -rf $PKG +mkdir -p $TMP $PKG $OUTPUT +cd $TMP +rm -rf $PRGNAM-$VERSION +tar xvf $CWD/$PRGNAM-$VERSION.tar.gz +cd $PRGNAM-$VERSION +chown -R root:root . +find -L . \ + \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \ + -o -perm 511 \) -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \ + -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \; + +patch -p1 < $CWD/inputname.diff +patch -p1 < $CWD/use_local_dtd.diff +patch -p1 < $CWD/odbxtest_exit_1_on_error.diff + +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --mandir=/usr/man \ + --docdir=/usr/doc/$PRGNAM-$VERSION \ + --disable-static \ + --build=$ARCH-slackware-linux + +# Fix OpenDBX bug with Doxygen +ln -s api lib/opendbx/api.dox +cd doc +doxygen -u +cd .. + +make +make install-strip DESTDIR=$PKG + +find $PKG/usr/man -type f -exec gzip -9 {} \; +for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a ABOUT-NLS INSTALL NEWS COPYING README TODO $PKG/usr/doc/$PRGNAM-$VERSION +cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz} diff --git a/development/opendbx/opendbx.info b/development/opendbx/opendbx.info new file mode 100644 index 0000000000..7ea02de8a7 --- /dev/null +++ b/development/opendbx/opendbx.info @@ -0,0 +1,10 @@ +PRGNAM="opendbx" +VERSION="1.4.6" +HOMEPAGE="https://www.linuxnetworks.de/doc/index.php/OpenDBX" +DOWNLOAD="http://linuxnetworks.de/opendbx/download/opendbx-1.4.6.tar.gz" +MD5SUM="3e89d7812ce4a28046bd60d5f969263d" +DOWNLOAD_x86_64="" +MD5SUM_x86_64="" +REQUIRES="libbsd" +MAINTAINER="Eugene Wissner" +EMAIL="belka@caraus.de" diff --git a/development/opendbx/slack-desc b/development/opendbx/slack-desc new file mode 100644 index 0000000000..fb1fd85bd2 --- /dev/null +++ b/development/opendbx/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. +# Line up the first '|' above the ':' following the base package name, and +# the '|' on the right side marks the last column you can put a character in. +# You must make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':' except on otherwise blank lines. + + |-----handy-ruler------------------------------------------------------| +opendbx: opendbx (Database Access Library) +opendbx: +opendbx: OpenDBX is an extremely lightweight but extensible database access +opendbx: library written in C. It provides an abstraction layer to all +opendbx: supported databases with a single, clean and simple interface that +opendbx: leads to an elegant code design automatically. If you want your +opendbx: application to support different databases with little effort, this +opendbx: is definitively the right thing for you! +opendbx: +opendbx: +opendbx: diff --git a/development/opendbx/use_local_dtd.diff b/development/opendbx/use_local_dtd.diff new file mode 100644 index 0000000000..634b90e386 --- /dev/null +++ b/development/opendbx/use_local_dtd.diff @@ -0,0 +1,30 @@ +Description: Use local copy of docbookx.dtd + http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd is added to debian + dir and used instead of the online one so the package can build with no + network access. +Author: Scott Kitterman <scott@kitterman.com> +Origin: vendor +Forwarded: not-needed + +Index: libopendbx-1.4.6/utils/doc/opendbx-utils.en.xml +=================================================================== +--- libopendbx-1.4.6.orig/utils/doc/opendbx-utils.en.xml 2012-11-03 22:31:11.226725868 -0400 ++++ libopendbx-1.4.6/utils/doc/opendbx-utils.en.xml 2012-11-03 22:31:15.022725927 -0400 +@@ -1,5 +1,5 @@ + <!DOCTYPE set PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" +- "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> ++ "../../debian/xml/docbookx.dtd"> + + <set> + <title>OpenDBX</title> +Index: libopendbx-1.4.6/doc/opendbx.en.xml +=================================================================== +--- libopendbx-1.4.6.orig/doc/opendbx.en.xml 2012-11-03 22:29:36.550724394 -0400 ++++ libopendbx-1.4.6/doc/opendbx.en.xml 2012-11-03 22:34:20.582728815 -0400 +@@ -1,5 +1,5 @@ + <!DOCTYPE set PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" +- "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> ++ "../debian/xml/docbookx.dtd"> + + <set> + <title>OpenDBX</title> |