summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--system/openct/README37
-rw-r--r--system/openct/README.SBo18
-rw-r--r--system/openct/doinst.sh1
-rw-r--r--system/openct/openct.SlackBuild69
-rw-r--r--system/openct/openct.info8
-rw-r--r--system/openct/slack-desc8
6 files changed, 60 insertions, 81 deletions
diff --git a/system/openct/README b/system/openct/README
index fc4f066f7f..3096d8d03f 100644
--- a/system/openct/README
+++ b/system/openct/README
@@ -4,35 +4,12 @@ a small and lean middleware, so applications can use it with minimal
overhead. OpenCT also has a primitive mechanism to export smart card
readers to remote machines via TCP/IP.
-This requires pcsc-lite (available on SlackBuilds.org).
+This requires pcsc-lite.
-For serial and pcmcia readers only, for using it as a PC/SC ifdhandler,
-you have to edit file reader-openct.conf in /etc/reader.conf.d/, to
-comment lines in other file(s) and run "/usr/sbin/update-reader.conf".
-
-Compiling with "APIDOC=1 ./openct.SlackBuild" produces API .pdf
-documentation (mainly intended for developers).
-
-Compiling with "HALD=1 ./openct.SlackBuild" enable smart-card reader
-detection using hal daemon's .fdi files. By default openct uses udev rules
-instead to detect it. Hal and udev are alternative.
-
-Compiling with "NONPRIV=1 ./openct.SlackBuild" enable non-privileged
-mode, but you may need to modify /etc/rc.d/rc.openctd to allow 'chown'
-to change user/group.
-
-To start OpenCT daemon, run "/etc/rc.d/rc.openctd start". This is
-most easily accomplished by adding the following to /etc/rc.d/rc.local:
- if [ -x /etc/rc.d/rc.openctd ]; then
- /etc/rc.d/rc.openctd start
- fi
-
-Beware!
-- OpenCT daemon is meant as _alternative_ to pcsc-lite: running rc.openctd
-and rc.pcscd at the same time can and will lead to unforseeable problems
-(specially with usb devices that can be managed by both of them, one daemon
-can claim one device, making it unavailable for other daemon).
-- for some unknown reasons, if you start rc.openctd and then stop it,
-you may need unplug and plug-in your usb smartcard reader in order
-to it to be seen again, so udev rule is re-applied.
+Smart-card reader detection using hal daemon is now deprecated. We use
+udev rules only.
+Compiling with "NONPRIV=1 ./openct.SlackBuild" enables
+non-privileged mode, but you may need to modify /etc/rc.d/rc.openctd
+to allow 'chown' to change user/group.
+See README.SBo for further information.
diff --git a/system/openct/README.SBo b/system/openct/README.SBo
new file mode 100644
index 0000000000..c15b64f274
--- /dev/null
+++ b/system/openct/README.SBo
@@ -0,0 +1,18 @@
+To start OpenCT daemon, run "/etc/rc.d/rc.openctd start". This is
+most easily accomplished by adding the following to /etc/rc.d/rc.local:
+ if [ -x /etc/rc.d/rc.openctd ]; then
+ /etc/rc.d/rc.openctd start
+ fi
+
+For serial and pcmcia readers only, for using it as a PC/SC ifdhandler,
+you have to edit file reader-openct.conf in /etc/reader.conf.d/, to
+comment lines in other file(s) and run "/usr/sbin/update-reader.conf".
+
+Beware!
+- OpenCT daemon is meant as _alternative_ to pcsc-lite: running rc.openctd
+and rc.pcscd at the same time can and will lead to unforseeable problems
+(specially with usb devices that can be managed by both of them, one daemon
+can claim one device, making it unavailable for other daemon).
+- for some unknown reasons, if you start rc.openctd and then stop it,
+you may need unplug and plug-in your usb smartcard reader in order
+to it to be seen again, so udev rule is re-applied.
diff --git a/system/openct/doinst.sh b/system/openct/doinst.sh
index 359dfdfc76..bb02ff148c 100644
--- a/system/openct/doinst.sh
+++ b/system/openct/doinst.sh
@@ -21,3 +21,4 @@ fi
config etc/rc.d/rc.openctd.new
config etc/openct.conf.new
config etc/reader.conf.d/reader-openct.conf.new
+
diff --git a/system/openct/openct.SlackBuild b/system/openct/openct.SlackBuild
index b408369105..3924ed707f 100644
--- a/system/openct/openct.SlackBuild
+++ b/system/openct/openct.SlackBuild
@@ -2,7 +2,7 @@
# Slackware build script for openct
-# Copyright 2008-2009 LukenShiro <lukenshiro@ngi.it>
+# Copyright 2008-2010 LukenShiro <lukenshiro@ngi.it>
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
PRGNAM=openct
-VERSION=${VERSION:-0.6.16}
+VERSION=${VERSION:-0.6.19}
ARCH=${ARCH:-i486}
BUILD=${BUILD:-1}
TAG=${TAG:-_SBo}
@@ -35,7 +35,7 @@ OUTPUT=${OUTPUT:-/tmp}
APIDOC=${APIDOC:-0} # api documentation not built by default
NONPRIV=${NONPRIV:-0} # disable not-privileged mode (it will be used by root)
-HALD=${HALD:-0} # hal detection is disabled by default, we use udev instead
+
DOCFILES="NEWS TODO LGPL-2.1"
if [ "$ARCH" = "i486" ]; then
@@ -81,13 +81,6 @@ case "$NONPRIV" in
;;
esac
-case "$HALD" in
- 0) UDEV_FLAGS="--with-udev=/lib${LIBDIRSUFFIX}/udev"
- ;;
- *) UDEV_FLAGS="" # do nothing
- ;;
-esac
-
CFLAGS="$SLKCFLAGS" \
CXXFLAGS="$SLKCFLAGS" \
./configure \
@@ -105,10 +98,10 @@ CXXFLAGS="$SLKCFLAGS" \
--${APIDOC_FLAG}able-api-doc \
--with-ifddir=/usr/lib${LIBDIRSUFFIX}/ifd \
--disable-static \
- --build=$ARCH-slackware-linux \
+ --with-udev=/lib/udev \
--with-daemon-user=root \
$NONPRIV_FLAGS \
- $UDEV_FLAGS
+ --build=$ARCH-slackware-linux
make
make install DESTDIR=$PKG
@@ -139,35 +132,21 @@ sed -i "s|^DEVICENAME|#DEVICENAME|g" $PKG/etc/reader.conf.d/reader-openct.conf.n
sed -i "s|^LIBPATH|#LIBPATH|g" $PKG/etc/reader.conf.d/reader-openct.conf.new
sed -i "s|^CHANNELID|#CHANNELID|g" $PKG/etc/reader.conf.d/reader-openct.conf.new
-# Hal and udev detection are alternative, and their rules should not be
-# installed at the same time, according to upstream.
-case "$HALD" in
- 0) # Install udev scripts for openct
- mkdir -p $PKG/lib${LIBDIRSUFFIX}/udev
- install -m755 etc/openct_usb $PKG/lib${LIBDIRSUFFIX}/udev/openct_usb
- install -m755 etc/openct_pcmcia $PKG/lib${LIBDIRSUFFIX}/udev/openct_pcmcia
- install -m755 etc/openct_serial $PKG/lib${LIBDIRSUFFIX}/udev/openct_serial
-
- # Install udev rules for openct
- mkdir -p $PKG/lib${LIBDIRSUFFIX}/udev/rules.d
- cp -a etc/openct.udev $PKG/lib${LIBDIRSUFFIX}/udev/rules.d/95-openct.rules
- # Update attributes according to recent udev rules' naming convention
- sed -i "s|SYSFS{|ATTR{|g" $PKG/lib${LIBDIRSUFFIX}/udev/rules.d/95-openct.rules
- # WAIT_FOR_SYSFS is replaced by WAIT_FOR in udev>=123:
- sed -i "s|WAIT_FOR_SYSFS=|WAIT_FOR=|g" $PKG/lib${LIBDIRSUFFIX}/udev/rules.d/95-openct.rules
- # modification taken to prevent bug (as happened in other distributions:
- # i.e. https://bugzilla.redhat.com/287871):
- # it seems 'sleep' program would otherwise be applied to every usb add
- # event, not only to this one
- sed -i "s|^PROGRAM=|#PROGRAM=|g" $PKG/lib${LIBDIRSUFFIX}/udev/rules.d/95-openct.rules
- ;;
- *) # Install openct rules/script for hal
- mkdir -p $PKG/usr/share/hal/fdi/information/10freedesktop/
- cp -a etc/openct.fdi $PKG/usr/share/hal/fdi/information/10freedesktop/10-usb-openct.fdi
- mkdir -p $PKG/usr/libexec
- install -m755 etc/openct.hald $PKG/usr/libexec/hald-addon-openct
- ;;
-esac
+# Hal detection is now deprecated by upstream, so we use udev detection.
+# Install udev scripts for openct
+mkdir -p $PKG/lib/udev
+install -m755 etc/openct_usb $PKG/lib/udev/openct_usb
+install -m755 etc/openct_pcmcia $PKG/lib/udev/openct_pcmcia
+install -m755 etc/openct_serial $PKG/lib/udev/openct_serial
+
+# Install udev rules for openct
+mkdir -p $PKG/lib/udev/rules.d
+cp -a etc/openct.udev $PKG/lib/udev/rules.d/95-openct.rules
+# modification taken to prevent bug (as happened in other distributions:
+# i.e. https://bugzilla.redhat.com/287871):
+# it seems 'sleep' program would otherwise be applied to every usb add
+# event, not only to this one
+sed -i "s|^PROGRAM=|#PROGRAM=|g" $PKG/lib/udev/rules.d/95-openct.rules
# Directory for status, socket and lock files
mkdir -p $PKG/var/run/openct
@@ -183,8 +162,10 @@ chown $USR_GRP $PKG/var/run/openct
mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/ifd
( cd $PKG
- find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
- find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \
+ xargs strip --strip-unneeded 2> /dev/null || true
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \
+ xargs strip --strip-unneeded 2> /dev/null
)
( cd $PKG/usr/man
@@ -203,4 +184,4 @@ cat $CWD/slack-desc > $PKG/install/slack-desc
cat $CWD/doinst.sh > $PKG/install/doinst.sh
cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/system/openct/openct.info b/system/openct/openct.info
index 8dc3749ed2..81ee2f311d 100644
--- a/system/openct/openct.info
+++ b/system/openct/openct.info
@@ -1,8 +1,10 @@
PRGNAM="openct"
-VERSION="0.6.16"
+VERSION="0.6.19"
HOMEPAGE="http://www.opensc-project.org/openct/"
-DOWNLOAD="http://www.opensc-project.org/files/openct/openct-0.6.16.tar.gz"
-MD5SUM="d8d8c63269985303a303a218c4b953d7"
+DOWNLOAD="http://www.opensc-project.org/files/openct/openct-0.6.19.tar.gz"
+MD5SUM="273f6dfd1c5f32990e23e8a0f3ca261c"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
MAINTAINER="LukenShiro"
EMAIL="lukenshiro@ngi.it"
APPROVED="dsomero"
diff --git a/system/openct/slack-desc b/system/openct/slack-desc
index 772bb515a8..d15bd8bfb1 100644
--- a/system/openct/slack-desc
+++ b/system/openct/slack-desc
@@ -7,13 +7,13 @@
|-----handy-ruler---------------------------------------------------|
openct: openct (Middleware framework for smart card terminals)
-openct:
+openct:
openct: It implements drivers for several smart card readers. It comes as
openct: driver in ifdhandler format for PC/SC-Lite, as CT-API driver, or
openct: as a small and lean middleware, so applications can use it with
openct: minimal overhead. OpenCT also has a primitive mechanism to export
openct: smart card readers to remote machines via TCP/IP.
-openct:
+openct:
openct: Homepage: http://www.opensc-project.org/openct/
-openct:
-openct:
+openct:
+openct: