8 files changed, 520 insertions, 0 deletions
diff --git a/system/clamav/README b/system/clamav/README
new file mode 100644
index 0000000000..67a4f9c5a9
--- /dev/null
+++ b/system/clamav/README
@@ -0,0 +1,58 @@
+Clam AntiVirus is a GPL anti-virus toolkit for UNIX. The main purpose
+of this software is the integration with mail servers (attachment
+scanning). The package provides a flexible and scalable multi-threaded
+daemon, a command line scanner, and a tool for automatic updating via
+Internet.
+
+This build script should build a package that "just works" after install.
+You will need to specify a two-letter country code (such as "us") as an
+argument to the COUNTRY variable when running the build script (this will
+default to "us" if nothing is specified).  For example:
+  COUNTRY=nl ./clamav.SlackBuild
+
+The package contains a start/stop script: /etc/rc.d/rc.clamav.
+I would suggest calling this script from /etc/rc.d/rc.M just
+before Sendmail is started with code like:
+
+# Starting ClamAV daemons
+if [ -x /etc/rc.d/rc.clamav ]; then
+  /etc/rc.d/rc.clamav start
+fi
+
+The start/stop script will start: clamd, freshclam and clamav-milter.
+
+** ClamAV, Amavisd-new and SpamAssassin **
+You might want to use amavisd-new to act as an intermediary between Sendmail
+and ClamAV (and possible SpamAssassin too). Amavisd-new can be downloaded at
+http://www.ijs.si/software/amavisd/
+
+For clamd to be able to scan messages, when called by Amavisd-new, you must
+add "clamav" to the "amavis" group (provided that clamd.conf contains the
+"User clamav" directive), e.g. run:
+
+  # usermod -G $(id -Gn clamav | tr ' ' ','),amavis clamav
+
+Be sure to enable "AllowSupplementaryGroups" in clamd.conf and restart clamd.
+Also, to enable Amavisd-new to scan ClamAV's log files and produce nice
+statistics, the reverse must be done too; add user "amavis" to the group
+"clamav" as follows:
+
+  # usermod -G $(id -Gn amavis | tr ' ' ','),clamav amavis
+
+Add the rc.amavisd script to your /etc/rc.d/rc.M script between the start of
+clamav and sendmail, so that the relevant section looks like this:
+
+# Starting ClamAV daemon:
+if [ -x /etc/rc.d/rc.clamav ]; then
+  /etc/rc.d/rc.clamav start
+fi
+
+# Starting Amavisd daemon:
+if [ -x /etc/rc.d/rc.amavisd ]; then
+  /etc/rc.d/rc.amavisd start
+fi
+
+# Start the sendmail daemon:
+if [ -x /etc/rc.d/rc.sendmail ]; then
+  . /etc/rc.d/rc.sendmail start
+fi
diff --git a/system/clamav/clamav.SlackBuild b/system/clamav/clamav.SlackBuild
new file mode 100644
index 0000000000..828ba1a78b
--- /dev/null
+++ b/system/clamav/clamav.SlackBuild
@@ -0,0 +1,163 @@
+#!/bin/sh
+# Copyright (c) 2006,2007 Eric Hameleers <alien@slackware.com>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# -----------------------------------------------------------------------------
+
+# Modified to SBo format with the help of Yalla-One
+# Version bump and various other changes by Robby Workman <rworkman@slackbuilds.org>
+# No additional license terms added
+
+PRGNAM=clamav
+VERSION=0.91.2
+ARCH=${ARCH:-i486}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG="$TMP/package-$PRGNAM"
+OUTPUT=${OUTPUT:-/tmp}
+
+# Two letter country code
+# See http://www.iana.org/cctld/cctld-whois.htm for options
+COUNTRY=${COUNTRY:-us}
+
+# Read "README.slackware" for compatibility with amavisd-new
+CLAMUSR=${CLAMUSR:-clamav}
+CLAMGRP=${CLAMGRP:-clamav}
+CLAMUID=${CLAMUID:-210}
+CLAMGID=${CLAMGID:-210}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+fi
+
+# Check for ClamAV user and group availability
+DO_EXIT=0
+if ! grep ^${CLAMGRP}: /etc/group 2>&1 > /dev/null; then
+  cat << EOF
+
+  You must have a ${CLAMGRP} group to run this script.
+  # groupadd -g ${CLAMGID} ${CLAMGRP}
+
+EOF
+  DO_EXIT=1
+elif ! grep ^${CLAMUSR}: /etc/passwd 2>&1 > /dev/null; then
+  cat << EOF
+
+  Must have a ${CLAMUSR} user to run this script.
+  # useradd -u ${CLAMUID} -d /dev/null -s /bin/false -g ${CLAMGRP} ${CLAMUSR}
+
+EOF
+  DO_EXIT=1
+fi
+[ $DO_EXIT -eq 1 ] && exit
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP || exit 1
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz || exit 1
+cd $PRGNAM-$VERSION || exit 1
+chown -R root:root .
+chmod -R u+w,go+r-w,a-s .
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+LDFLAGS="$SLKLDFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib \
+  --localstatedir=/var \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --with-user=${CLAMUSR} \
+  --with-group=${CLAMGRP} \
+  --with-dbdir=/usr/share/clamav \
+  --with-libcurl \
+  --with-tcpwrappers \
+  --enable-milter \
+  --enable-id-check \
+  --disable-static
+
+make || exit 1
+
+# Patch the configuration files
+cd etc
+patch < $CWD/clamd.conf.patch
+patch < $CWD/freshclam.conf.patch
+cd -
+
+make install DESTDIR=$PKG || exit 1 
+
+# Prepare the config files:
+cd $PKG/etc
+mv clamd.conf clamd.conf.new
+mv freshclam.conf freshclam.conf.new
+cd -
+
+# Specify the desired mirror in the update config file
+# http://www.iana.org/cctld/cctld-whois.htm
+sed -i "s/COUNTRY/$COUNTRY/g" $PKG/etc/freshclam.conf.new
+
+# Where to store the pid file:
+mkdir -p $PKG/var/run/clamav
+
+# Our rc script:
+mkdir -p $PKG/etc/rc.d/
+cp $CWD/rc.clamav $PKG/etc/rc.d/rc.clamav.new
+chown root:root $PKG/etc/rc.d/rc.clamav.new
+chmod 754 $PKG/etc/rc.d/rc.clamav.new
+
+cp $CWD/README README.slackware
+cp -a clamav-milter/INSTALL INSTALL.milter
+DOCS="AUTHORS BUGS COPYING ChangeLog FAQ INSTALL NEWS README UPGRADE \
+      docs/*.pdf docs/html examples INSTALL.milter README.slackware"
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION || true
+chmod -R a-w $PKG/usr/doc/$PRGNAM-$VERSION/*
+
+# Compress the man page(s)
+find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \;
+
+# Strip binaries
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Ownership, rights:
+chown -R root:root $PKG
+chmod -R o-w $PKG
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh >> $PKG/install/doinst.sh
+
+# Substitute in the actual user/group parameters used
+sed -i s/_SUB_CLAMUSR/$CLAMUSR/ $PKG/install/doinst.sh
+sed -i s/_SUB_CLAMGRP/$CLAMGRP/ $PKG/install/doinst.sh
+sed -i s/_SUB_CLAMUID/$CLAMUID/ $PKG/install/doinst.sh
+sed -i s/_SUB_CLAMGID/$CLAMGID/ $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz
diff --git a/system/clamav/clamav.info b/system/clamav/clamav.info
new file mode 100644
index 0000000000..94f6db19e6
--- /dev/null
+++ b/system/clamav/clamav.info
@@ -0,0 +1,8 @@
+PRGNAM="clamav"
+VERSION="0.91.2"
+HOMEPAGE="http://www.clamav.net/"
+DOWNLOAD="http://downloads.sourceforge.net/clamav/clamav-0.91.2.tar.gz"
+MD5SUM="2a7265d17cfa80c32858978f16a3f47b"
+MAINTAINER="Yalla-One"
+EMAIL="yallaone@gmail.com"
+APPROVED="BP{k}"
diff --git a/system/clamav/clamd.conf.patch b/system/clamav/clamd.conf.patch
new file mode 100644
index 0000000000..607f18259d
--- /dev/null
+++ b/system/clamav/clamd.conf.patch
@@ -0,0 +1,67 @@
+--- clamd.conf.orig	2007-07-24 11:22:34.000000000 +0200
++++ clamd.conf	2007-07-24 11:29:08.000000000 +0200
+@@ -5,7 +5,7 @@
+ 
+ 
+ # Comment or remove the line below.
+-Example
++#Example
+ 
+ # Uncomment this option to enable logging.
+ # LogFile must be writable for the user running daemon.
+@@ -40,12 +40,12 @@
+ 
+ # Use system logger (can work together with LogFile).
+ # Default: no
+-#LogSyslog yes
++LogSyslog yes
+ 
+ # Specify the type of syslog messages - please refer to 'man syslog'
+ # for facility names.
+ # Default: LOG_LOCAL6
+-#LogFacility LOG_MAIL
++LogFacility LOG_MAIL
+ 
+ # Enable verbose logging.
+ # Default: no
+@@ -54,7 +54,7 @@
+ # This option allows you to save a process identifier of the listening
+ # daemon (main thread).
+ # Default: disabled
+-#PidFile /var/run/clamd.pid
++PidFile /var/run/clamav/clamd.pid
+ 
+ # Optional path to the global temporary directory.
+ # Default: system specific (usually /tmp or /var/tmp).
+@@ -69,11 +69,11 @@
+ 
+ # Path to a local socket file the daemon will listen on.
+ # Default: disabled (must be specified by a user)
+-LocalSocket /tmp/clamd.socket
++LocalSocket /var/run/clamav/clamd.socket
+ 
+ # Remove stale socket after unclean shutdown.
+ # Default: no
+-#FixStaleSocket yes
++FixStaleSocket yes
+ 
+ # TCP port address.
+ # Default: no
+@@ -142,14 +142,14 @@
+ # Run as another user (clamd must be started by root to make this option
+ # working).
+ # Default: don't drop privileges
+-#User clamav
++User clamav
+ 
+ # Initialize supplementary group access (clamd must be started by root).
+ # Default: no
+-#AllowSupplementaryGroups no
++AllowSupplementaryGroups yes
+ 
+ # Stop daemon when libclamav reports out of memory condition.
+-#ExitOnOOM yes
++ExitOnOOM yes
+ 
+ # Don't fork into background.
+ # Default: no
diff --git a/system/clamav/doinst.sh b/system/clamav/doinst.sh
new file mode 100644
index 0000000000..0764576fed
--- /dev/null
+++ b/system/clamav/doinst.sh
@@ -0,0 +1,81 @@
+# Read "README.slackware" for compatibility with amavisd-new
+
+# These values are set in the build script and sed'ed into this
+CLAMUSR=_SUB_CLAMUSR
+CLAMGRP=_SUB_CLAMGRP
+CLAMUID=_SUB_CLAMUID
+CLAMGID=_SUB_CLAMGID
+
+# Handle the incoming configuration files:
+config() {
+  for infile in $1; do
+    NEW="$infile"
+    OLD="$(dirname $NEW)/$(basename $NEW .new)"
+    # If there's no config file by that name, mv it over:
+    if [ ! -r $OLD ]; then
+      mv $NEW $OLD
+    elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+      # toss the redundant copy
+      rm $NEW
+    fi
+    # Otherwise, we leave the .new copy for the admin to consider...
+  done
+}
+
+config etc/freshclam.conf.new
+config etc/clamd.conf.new
+config etc/rc.d/rc.clamav.new
+
+# Create log files
+# We don't do this inside the package because we don't want the package 
+# to remove them if clamav is uninstalled
+touch var/log/clamd.log
+touch var/log/freshclam.log
+
+# Check for presence of $CLAMUSR and $CLAMGRP on target system
+DO_EXIT=0
+if ! grep ^${CLAMGRP}: etc/group 2>&1 > /dev/null; then
+  cat << EOF
+
+  You must have a ${CLAMGRP} group present for this post-installation
+  script to complete.  First, do this:
+
+  # groupadd -g ${CLAMGID} ${CLAMGRP}
+
+  Then, do *one* of the following:
+  (1) Run "upgradepkg --reinstall clamav-*tgz" or
+  (2) Change to the directory '/' (using "cd /") and run the script /var/log/scripts/clamav-* manually.
+EOF
+  DO_EXIT=1
+elif ! grep ^${CLAMUSR}: etc/passwd 2>&1 > /dev/null; then
+  cat << EOF
+
+  You must have a ${CLAMUSR} user present for this post-installation
+  script to complete.  First, do this:
+
+  # useradd -u ${CLAMUID} -d /dev/null -s /bin/false -g ${CLAMGRP} ${CLAMUSR}
+
+  Then, do *one* of the following:
+  (1) Run "upgradepkg --reinstall clamav-*tgz" or
+  (2) Change to the directory '/' (using "cd /") and run the script /var/log/scripts/clamav-* manually.
+EOF
+  DO_EXIT=1
+fi
+[ $DO_EXIT -eq 1 ] && exit
+# Only way to create and use the correct uid and gid on the target system,
+# is to use chroot:
+chroot . <<EOR 2>/dev/null
+
+# Restore the correct permissions
+chown ${CLAMUSR} usr/sbin/clamav-milter
+chmod 4700 usr/sbin/clamav-milter
+chown -R ${CLAMUSR}:${CLAMGRP} var/run/clamav
+chmod 771 var/run/clamav
+chown ${CLAMUSR}:${CLAMGRP} var/log/clamd.log
+chmod 660 var/log/clamd.log
+chown ${CLAMUSR}:${CLAMGRP} var/log/freshclam.log
+chmod 660 var/log/freshclam.log
+chown -R ${CLAMUSR}:${CLAMGRP} usr/share/clamav
+chmod -R 770 usr/share/clamav
+EOR
+
diff --git a/system/clamav/freshclam.conf.patch b/system/clamav/freshclam.conf.patch
new file mode 100644
index 0000000000..c90a961940
--- /dev/null
+++ b/system/clamav/freshclam.conf.patch
@@ -0,0 +1,66 @@
+--- freshclam.conf.orig	2007-02-11 10:54:46.000000000 +0100
++++ freshclam.conf	2007-02-14 09:46:29.000000000 +0100
+@@ -5,12 +5,12 @@
+ 
+ 
+ # Comment or remove the line below.
+-Example
++#Example
+ 
+ # Path to the database directory.
+ # WARNING: It must match clamd.conf's directive!
+ # Default: hardcoded (depends on installation options)
+-#DatabaseDirectory /var/lib/clamav
++#DatabaseDirectory /usr/share/clamav
+ 
+ # Path to the log file (make sure it has proper permissions)
+ # Default: disabled
+@@ -22,25 +22,25 @@
+ 
+ # Use system logger (can work together with UpdateLogFile).
+ # Default: no
+-#LogSyslog yes
++LogSyslog yes
+ 
+ # Specify the type of syslog messages - please refer to 'man syslog'
+ # for facility names.
+ # Default: LOG_LOCAL6
+-#LogFacility LOG_MAIL
++LogFacility LOG_MAIL
+ 
+ # This option allows you to save the process identifier of the daemon
+ # Default: disabled
+-#PidFile /var/run/freshclam.pid
++PidFile /var/run/clamav/freshclam.pid
+ 
+ # By default when started freshclam drops privileges and switches to the
+ # "clamav" user. This directive allows you to change the database owner.
+ # Default: clamav (may depend on installation options)
+-#DatabaseOwner clamav
++DatabaseOwner clamav
+ 
+ # Initialize supplementary group access (freshclam must be started by root).
+ # Default: no
+-#AllowSupplementaryGroups yes
++AllowSupplementaryGroups yes
+ 
+ # Use DNS to verify virus database version. Freshclam uses DNS TXT records
+ # to verify database and software versions. With this directive you can change
+@@ -52,7 +52,7 @@
+ 
+ # Uncomment the following line and replace XY with your country
+ # code. See http://www.iana.org/cctld/cctld-whois.htm for the full list.
+-#DatabaseMirror db.XY.clamav.net
++DatabaseMirror db.COUNTRY.clamav.net
+ 
+ # database.clamav.net is a round-robin record which points to our most 
+ # reliable mirrors. It's used as a fall back in case db.XY.clamav.net is 
+@@ -92,7 +92,7 @@
+ 
+ # Send the RELOAD command to clamd.
+ # Default: no
+-#NotifyClamd /path/to/clamd.conf
++NotifyClamd /etc/clamd.conf
+ 
+ # Run command after successful database update.
+ # Default: disabled
diff --git a/system/clamav/rc.clamav b/system/clamav/rc.clamav
new file mode 100644
index 0000000000..5197a1c4de
--- /dev/null
+++ b/system/clamav/rc.clamav
@@ -0,0 +1,58 @@
+#!/bin/sh
+# Start/stop/restart clamav.
+# $Id: rc.clamav,v 1.1 2007/02/14 10:29:03 root Exp root $
+# Author: Eric Hameleers <alien@slackware.com>
+# ---------------------------------------------------------------------------
+# Slightly modified by Robby Workman <rworkman@slackbuilds.org>
+# to replace backticks ( s/`command`/$(command)/ )
+
+# Set to '1' if you want milter support:
+MILTER=0
+
+# Start clamav:
+clamav_start() {
+  if [ -x /usr/sbin/clamd ]; then
+    echo -n "Starting clamd daemon:  /usr/sbin/clamd "
+    /usr/sbin/clamd
+    echo "."
+    # Give clamd a chance to create the socket
+    sleep 1
+    echo -n "Starting freshclam daemon:  /usr/bin/freshclam -d -l /var/log/freshclam.log "
+    /usr/bin/freshclam -d -l /var/log/freshclam.log
+    echo "."
+    if [ "$MILTER" == "1" ]; then
+      echo -n "Starting clamav-milter daemon:  /usr/sbin/clamav-milter -dblo --max-children=2 local:/var/run/clamav/clmilter.sock "
+      /usr/sbin/clamav-milter -dblo --max-children=2 local:/var/run/clamav/clmilter.sock
+      echo "."
+    fi
+  fi
+}
+
+# Stop clamav:
+clamav_stop() {
+  kill $(cat /var/run/clamav/clamd.pid)
+  #killall freshclam
+  kill $(cat /var/run/clamav/freshclam.pid)
+  [ "$MILTER" == "1" ] && killall clamav-milter
+}
+
+# Restart clamav:
+clamav_restart() {
+  clamav_stop
+  sleep 1
+  clamav_start
+}
+
+case "$1" in
+'start')
+  clamav_start
+  ;;
+'stop')
+  clamav_stop
+  ;;
+'restart')
+  clamav_restart
+  ;;
+*)
+  echo "usage $0 start|stop|restart"
+esac
diff --git a/system/clamav/slack-desc b/system/clamav/slack-desc
new file mode 100644
index 0000000000..c23acc2a4f
--- /dev/null
+++ b/system/clamav/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+clamav: clamav (a GPL-ed virus scanner)
+clamav:
+clamav: Clam AntiVirus is a GPL anti-virus toolkit for UNIX. The main purpose
+clamav: of this software is the integration with mail servers (attachment
+clamav: scanning). The package provides a flexible and scalable multi-threaded
+clamav: daemon, a command line scanner, and a tool for automatic updating via
+clamav: Internet.
+clamav: Most importantly, the virus database is kept up to date .
+clamav: For setup, see README.slackware in the /usr/doc/clamav-*  directory.
+clamav:
+clamav: clamav info at http://www.clamav.net/