4 files changed, 190 insertions, 0 deletions
diff --git a/academic/Xyce/README b/academic/Xyce/README
new file mode 100644
index 0000000000..846bb7c827
--- /dev/null
+++ b/academic/Xyce/README
@@ -0,0 +1,38 @@
+Xyce is an open source, SPICE-compatible, high-performance analog circuit
+simulator, capable of solving extremely large circuit problems by supporting
+large-scale parallel computing platforms. It also supports serial execution on
+all common desktop platforms, and small-scale parallel runs on Unix-like
+systems. In addition to analog electronic simulation, Xyce has also been used
+to investigate more general network systems, such as neural networks and power
+grids.
+
+The Xyce Parallel Electronic Simulator is a SPICE-compatible circuit simulator,
+developed internally at Sandia National Laboratories and funded by the National
+Nuclear Security Administration's Advanced Simulation and Computing (ASC)
+Campaign. In continuous development since 1999, Xyce is designed to run on
+large-scale parallel computing platforms, though it also executes efficiently on
+a variety of architectures, including single processor workstations. As a mature
+platform for large-scale parallel circuit simulation, Xyce supports standard
+capabilities available from commercial simulators, in addition to a variety of
+devices and models specific to Sandia's needs.
+
+The package is intalled at: /opt/Xyce
+Remember to set the library and path:
+
+PATH=$PATH:/opt/Xyce/bin
+
+For 32-bit:
+LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/opt/Xyce/lib
+
+For 64-bit:
+LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/opt/Xyce/lib64
+
+To run the suite test:
+# cd /opt/Xyce/Xyce_Regression-6.3/TestScripts
+# ./run_xyce_regression
+
+For parallel simulation trilinos must be compiled with MPI.
+
+Additonal requirements:
+ - MPI (openmpi/mpich)
+ - parMETIS
diff --git a/academic/Xyce/Xyce.SlackBuild b/academic/Xyce/Xyce.SlackBuild
new file mode 100644
index 0000000000..b6390a8af7
--- /dev/null
+++ b/academic/Xyce/Xyce.SlackBuild
@@ -0,0 +1,120 @@
+#!/bin/sh
+
+# Slackware build script for Xyce
+
+# Copyright 2015 Guilherme Calandrini - Madrid (Spain)
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=Xyce
+VERSION=${VERSION:-6.3}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+SRCNAM="$PRGNAM"
+
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $SRCNAM-$VERSION
+tar xvf $CWD/$SRCNAM-$VERSION.tar.gz
+tar xvf $CWD/$SRCNAM\_Docs-$VERSION.tar.gz
+tar xvf $CWD/$SRCNAM\_Regression-$VERSION.tar.gz
+cd $SRCNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+
+if [ "${NONFREE:-no}" == yes ]; then
+  COPT_DEPS="-DXyce_NONFREE_MODEL=ON"
+else
+  COPT_DEPS="-DXyce_NONFREE_MODEL=OFF"
+fi
+
+if [ "${PARALLEL:-no}" == yes ]; then
+  COPT_DEPS="$COPTS_DEPS -DXyce_PARALLEL_MPI=ON \
+	  -DLIB_MPI=/usr/lib${LIBDIRSUFFIX} -DINC_MPI=/usr/include"
+else
+  COPT_DEPS="$COPTS_DEPS -DXyce_PARALLEL_MPI=OFF"
+fi
+
+mkdir BUILD
+cmake \
+  -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+  -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+  -DCMAKE_INSTALL_PREFIX=/opt/$PRGNAM \
+  $COPT_DEPS \
+  -DXyce_ENABLE_SHARED=yes \
+  -DCMAKE_BUILD_TYPE=Release
+
+make
+make install DESTDIR=$PKG
+
+# Install the test suite manually
+mv $TMP/$PRGNAM\_Regression-$VERSION \
+   $PKG/opt/$PRGNAM
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+find $PKG -depth -type d -empty -delete || true
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a COPYING $TMP/${PRGNAM}_Docs-$VERSION/*.pdf $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/academic/Xyce/Xyce.info b/academic/Xyce/Xyce.info
new file mode 100644
index 0000000000..3cb282d97f
--- /dev/null
+++ b/academic/Xyce/Xyce.info
@@ -0,0 +1,14 @@
+PRGNAM="Xyce"
+VERSION="6.3"
+HOMEPAGE="https://xyce.sandia.gov/index.html"
+DOWNLOAD="https://xyce.sandia.gov/downloads/_assets/documents/Xyce-6.3.tar.gz \
+ 	  https://xyce.sandia.gov/downloads/_assets/documents/Xyce_Docs-6.3.tar.gz \
+	  https://xyce.sandia.gov/downloads/_assets/documents/Xyce_Regression-6.3.tar.gz"
+MD5SUM="0d390539254cc240967b8df1eee74808 \
+ 	7f0cdb4029c3b713af355641f985f4ca \
+	2bdd10c498f134934910d7cc46b81837"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES="trilinos"
+MAINTAINER="Guilherme Calandrini"
+EMAIL="g_calandrini[at]hotmail[dot].es"
diff --git a/academic/Xyce/slack-desc b/academic/Xyce/slack-desc
new file mode 100644
index 0000000000..4f40769b83
--- /dev/null
+++ b/academic/Xyce/slack-desc
@@ -0,0 +1,18 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+    |-----handy-ruler--------------------------------------------------------|
+Xyce: Xyce (Xyce Parallel Electronic Simulator)
+Xyce:
+Xyce: The Xyce Parallel Electronic Simulator is a SPICE-compatible circuit
+Xyce: simulator, developed internally at Sandia National Laboratories and
+Xyce: funded by the National Nuclear Security Administration's Advanced
+Xyce: Simulation and Computing (ASC) Campaign. In continuous development
+Xyce: since 1999, Xyce is designed to run on large-scale parallel computing
+Xyce: platforms, though it also executes efficiently on a variety of xyce:
+Xyce: architectures, including single processor workstations.
+Xyce: