diff options
| -rw-r--r-- | network/exim/README | 28 | ||||
| -rw-r--r-- | network/exim/doinst.sh | 21 | ||||
| -rw-r--r-- | network/exim/exim.Makefile | 1137 | ||||
| -rw-r--r-- | network/exim/exim.SlackBuild | 123 | ||||
| -rw-r--r-- | network/exim/exim.info | 8 | ||||
| -rw-r--r-- | network/exim/exim.logrotate | 7 | ||||
| -rw-r--r-- | network/exim/eximon.Makefile | 182 | ||||
| -rw-r--r-- | network/exim/rc.exim.new | 61 | ||||
| -rw-r--r-- | network/exim/slack-desc | 19 |
9 files changed, 0 insertions, 1586 deletions
diff --git a/network/exim/README b/network/exim/README deleted file mode 100644 index 70321898b0..0000000000 --- a/network/exim/README +++ /dev/null @@ -1,28 +0,0 @@ -Exim is a mail transfer agent (MTA) used on Unix-like operating systems. -It is freely available under the GNU GPL and it aims to be a general -and flexible mailer with extensive facilities for checking incoming e-mail. - -Exim was orginally written by Philip Hazel for use in the University -of Cambridge Computing Services e-mail systems. - -Exim has no configure but requires the exim.Makefile. This file is included -with the makefile. The exim.Makefile has some of the more important attributes -enabled such as Content scanning, Database integration ((only Mysql), extra -security facilities (such as TCPWRAPPERS) and more. - -Also "eximon" (the configuration for this is eximon.Makefile) and has been -included which a nice and simple monitoring tool for X and hence can be used -from any console to monitor your MTA. Please read through both files -and mofidy them as you see fit. - -All documentation for exim is included in /usr/doc/exim-*. Another good -source for documentation can be found at http://www.exim-new-users.co.uk/. - -To fully integrate Exim with the rest of your system you would have to create -symlinks for sendmail to point to the exim binary. Please *NOTE* that this -might break sendmail from working. If you ever remove exim, you might need to -reinstall Sendmail. - -Finally Exim can be integrated with other email tools such as Clamav, -Spamassassin, Bogofilter and others, which are available at Slackbuilds.org. - diff --git a/network/exim/doinst.sh b/network/exim/doinst.sh deleted file mode 100644 index 5e76fa1af3..0000000000 --- a/network/exim/doinst.sh +++ /dev/null @@ -1,21 +0,0 @@ -config() { - NEW="$1" - OLD="$(dirname $NEW)/$(basename $NEW .new)" - # If there's no config file by that name, mv it over: - if [ ! -r $OLD ]; then - mv $NEW $OLD - elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy - rm $NEW - fi - # Otherwise, we leave the .new copy for the admin to consider... -} - -# Keep same perms on rc.exim.new: -if [ -e etc/rc.d/rc.exim ]; then - cp -a etc/rc.d/rc.exim etc/rc.d/rc.exim.new.incoming - cat etc/rc.d/rc.exim.new > etc/rc.d/rc.exim.new.incoming - mv etc/rc.d/rc.exim.new.incoming etc/rc.d/rc.exim.new -fi - -config etc/rc.d/rc.exim.new -config etc/exim/exim.conf.new diff --git a/network/exim/exim.Makefile b/network/exim/exim.Makefile deleted file mode 100644 index 0da094c859..0000000000 --- a/network/exim/exim.Makefile +++ /dev/null @@ -1,1137 +0,0 @@ -# $Cambridge: exim/exim-src/src/EDITME,v 1.20 2007/01/22 16:29:54 ph10 Exp $ - -################################################## -# The Exim mail transport agent # -################################################## - -# This is the template for Exim's main build-time configuration file. It -# contains settings that are independent of any operating system. These are -# things that are mostly sysadmin choices. The items below are divided into -# those you must specify, those you probably want to specify, those you might -# often want to specify, and those that you almost never need to mention. - -# Edit this file and save the result to a file called Local/Makefile within the -# Exim distribution directory before running the "make" command. - -# Things that depend on the operating system have default settings in -# OS/Makefile-Default, but these are overridden for some OS by files called -# called OS/Makefile-<osname>. You can further override these by creating files -# called Local/Makefile-<osname>, where "<osname>" stands for the name of your -# operating system - look at the names in the OS directory to see which names -# are recognized. - -# However, if you are building Exim for a single OS only, you don't need to -# worry about setting up Local/Makefile-<osname>. Any build-time configuration -# settings you require can in fact be placed in the one file called -# Local/Makefile. It is only if you are building for several OS from the same -# source files that you need to worry about splitting off your own OS-dependent -# settings into separate files. (There's more explanation about how this all -# works in the toplevel README file, under "Modifying the building process", as -# well as in the Exim specification.) - -# One OS-specific thing that may need to be changed is the command for running -# the C compiler; the overall default is gcc, but some OS Makefiles specify cc. -# You can override anything that is set by putting CC=whatever in your -# Local/Makefile. - -# NOTE: You should never need to edit any of the distributed Makefiles; all -# overriding can be done in your Local/Makefile(s). This will make it easier -# for you when the next release comes along. - -# The location of the X11 libraries is something else that is quite variable -# even between different versions of the same operating system (and indeed -# there are different versions of X11 as well, of course). The four settings -# concerned here are X11, XINCLUDE, XLFLAGS (linking flags) and X11_LD_LIB -# (dynamic run-time library). You need not worry about X11 unless you want to -# compile the Exim monitor utility. Exim itself does not use X11. - -# Another area of variability between systems is the type and location of the -# DBM library package. Exim has support for ndbm, gdbm, tdb, and Berkeley DB. -# By default the code assumes ndbm; this often works with gdbm or DB, provided -# they are correctly installed, via their compatibility interfaces. However, -# Exim can also be configured to use the native calls for Berkeley DB (obsolete -# versions 1.85, 2.x, 3.x, or the current 4.x version) and also for gdbm. - -# For some operating systems, a default DBM library (other than ndbm) is -# selected by a setting in the OS-specific Makefile. Most modern OS now have -# a DBM library installed as standard, and in many cases this will be selected -# for you by the OS-specific configuration. If Exim compiles without any -# problems, you probably do not have to worry about the DBM library. If you -# do want or need to change it, you should first read the discussion in the -# file doc/dbm.discuss.txt, which also contains instructions for testing Exim's -# interface to the DBM library. - -# In Local/Makefiles blank lines and lines starting with # are ignored. It is -# also permitted to use the # character to add a comment to a setting, for -# example -# -# EXIM_GID=42 # the "mail" group -# -# However, with some versions of "make" this works only if there is no white -# space between the end of the setting and the #, so perhaps it is best -# avoided. A consequence of this facility is that it is not possible to have -# the # character present in any setting, but I can't think of any cases where -# this would be wanted. -############################################################################### - -CFLAGS="#SLKCFLAGS#" - -############################################################################### -# THESE ARE THINGS YOU MUST SPECIFY # -############################################################################### - -# Exim will not build unless you specify BIN_DIRECTORY, CONFIGURE_FILE, and -# EXIM_USER. You also need EXIM_GROUP if EXIM_USER specifies a uid by number. - -# If you don't specify SPOOL_DIRECTORY, Exim won't fail to build. However, it -# really is a very good idea to specify it here rather than at run time. This -# is particularly true if you let the logs go to their default location in the -# spool directory, because it means that the location of the logs is known -# before Exim has read the run time configuration file. - -#------------------------------------------------------------------------------ -# BIN_DIRECTORY defines where the exim binary will be installed by "make -# install". The path is also used internally by Exim when it needs to re-invoke -# itself, either to send an error message, or to recover root privilege. Exim's -# utility binaries and scripts are also installed in this directory. There is -# no "standard" place for the binary directory. Some people like to keep all -# the Exim files under one directory such as /usr/exim; others just let the -# Exim binaries go into an existing directory such as /usr/sbin or -# /usr/local/sbin. The installation script will try to create this directory, -# and any superior directories, if they do not exist. - -BIN_DIRECTORY=/usr/sbin - - -#------------------------------------------------------------------------------ -# CONFIGURE_FILE defines where Exim's run time configuration file is to be -# found. It is the complete pathname for the file, not just a directory. The -# location of all other run time files and directories can be changed in the -# run time configuration file. There is a lot of variety in the choice of -# location in different OS, and in the preferences of different sysadmins. Some -# common locations are in /etc or /etc/mail or /usr/local/etc or -# /usr/local/etc/mail. Another possibility is to keep all the Exim files under -# a single directory such as /usr/exim. Whatever you choose, the installation -# script will try to make the directory and any superior directories if they -# don't exist. It will also install a default runtime configuration if this -# file does not exist. - -CONFIGURE_FILE=/etc/exim/exim.conf - -# It is possible to specify a colon-separated list of files for CONFIGURE_FILE. -# In this case, Exim will use the first of them that exists when it is run. -# However, if a list is specified, the installation script no longer tries to -# make superior directories or to install a default runtime configuration. - - -#------------------------------------------------------------------------------ -# The Exim binary must normally be setuid root, so that it starts executing as -# root, but (depending on the options with which it is called) it does not -# always need to retain the root privilege. These settings define the user and -# group that is used for Exim processes when they no longer need to be root. In -# particular, this applies when receiving messages and when doing remote -# deliveries. (Local deliveries run as various non-root users, typically as the -# owner of a local mailbox.) Specifying these values as root is very strongly -# discouraged. - -#EXIM_USER= - -# If you specify EXIM_USER as a name, this is looked up at build time, and the -# uid number is built into the binary. However, you can specify that this -# lookup is deferred until runtime. In this case, it is the name that is built -# into the binary. You can do this by a setting of the form: - -EXIM_USER=ref:exim - -# In other words, put "ref:" in front of the user name. If you set EXIM_USER -# like this, any value specified for EXIM_GROUP is also passed "by reference". -# Although this costs a bit of resource at runtime, it is convenient to use -# this feature when building binaries that are to be run on multiple systems -# where the name may refer to different uids. It also allows you to build Exim -# on a system where there is no Exim user defined. - -# If the setting of EXIM_USER is numeric (e.g. EXIM_USER=42), there must -# also be a setting of EXIM_GROUP. If, on the other hand, you use a name -# for EXIM_USER (e.g. EXIM_USER=exim), you don't need to set EXIM_GROUP unless -# you want to use a group other than the default group for the given user. - -EXIM_GROUP=exim - -# Many sites define a user called "exim", with an appropriate default group, -# and use -# -# EXIM_USER=exim -# -# while leaving EXIM_GROUP unspecified (commented out). - - -#------------------------------------------------------------------------------ -# SPOOL_DIRECTORY defines the directory where all the data for messages in -# transit is kept. It is strongly recommended that you define it here, though -# it is possible to leave this till the run time configuration. - -# Exim creates the spool directory if it does not exist. The owner and group -# will be those defined by EXIM_USER and EXIM_GROUP, and this also applies to -# all the files and directories that are created in the spool directory. - -# Almost all installations choose this: - -SPOOL_DIRECTORY=/var/spool/exim - - - -############################################################################### -# THESE ARE THINGS YOU PROBABLY WANT TO SPECIFY # -############################################################################### - -# If you need extra header file search paths on all compiles, put the -I -# options in INCLUDE. If you want the extra searches only for certain -# parts of the build, see more specific xxx_INCLUDE variables below. - -# INCLUDE=-I/example/include - -# You need to specify some routers and transports if you want the Exim that you -# are building to be capable of delivering mail. You almost certainly need at -# least one type of lookup. You should consider whether you want to build -# the Exim monitor or not. - - -#------------------------------------------------------------------------------ -# These settings determine which individual router drivers are included in the -# Exim binary. There are no defaults in the code; those routers that are wanted -# must be defined here by setting the appropriate variables to the value "yes". -# Including a router in the binary does not cause it to be used automatically. -# It has also to be configured in the run time configuration file. By -# commenting out those you know you don't want to use, you can make the binary -# a bit smaller. If you are unsure, leave all of these included for now. - -ROUTER_ACCEPT=yes -ROUTER_DNSLOOKUP=yes -ROUTER_IPLITERAL=yes -ROUTER_MANUALROUTE=yes -ROUTER_QUERYPROGRAM=yes -ROUTER_REDIRECT=yes - -# This one is very special-purpose, so is not included by default. - -# ROUTER_IPLOOKUP=yes - - -#------------------------------------------------------------------------------ -# These settings determine which individual transport drivers are included in -# the Exim binary. There are no defaults; those transports that are wanted must -# be defined here by setting the appropriate variables to the value "yes". -# Including a transport in the binary does not cause it to be used -# automatically. It has also to be configured in the run time configuration -# file. By commenting out those you know you don't want to use, you can make -# the binary a bit smaller. If you are unsure, leave all of these included for -# now. - -TRANSPORT_APPENDFILE=yes -TRANSPORT_AUTOREPLY=yes -TRANSPORT_PIPE=yes -TRANSPORT_SMTP=yes - -# This one is special-purpose, and commonly not required, so it is not -# included by default. - -# TRANSPORT_LMTP=yes - - -#------------------------------------------------------------------------------ -# The appendfile transport can write messages to local mailboxes in a number -# of formats. The code for three specialist formats, maildir, mailstore, and -# MBX, is included only when requested. If you do not know what this is about, -# leave these settings commented out. - - SUPPORT_MAILDIR=yes - SUPPORT_MAILSTORE=yes - SUPPORT_MBX=yes - - -#------------------------------------------------------------------------------ -# These settings determine which file and database lookup methods are included -# in the binary. See the manual chapter entitled "File and database lookups" -# for discussion. DBM and lsearch (linear search) are included by default. If -# you are unsure about the others, leave them commented out for now. -# LOOKUP_DNSDB does *not* refer to general mail routing using the DNS. It is -# for the specialist case of using the DNS as a general database facility (not -# common). - -LOOKUP_DBM=yes -LOOKUP_LSEARCH=yes - -# LOOKUP_CDB=yes -# LOOKUP_DNSDB=yes -LOOKUP_DSEARCH=yes -# LOOKUP_IBASE=yes -# LOOKUP_LDAP=yes -LOOKUP_MYSQL=yes -# LOOKUP_NIS=yes -# LOOKUP_NISPLUS=yes -# LOOKUP_ORACLE=yes -LOOKUP_PASSWD=yes -# LOOKUP_PGSQL=yes -# LOOKUP_SQLITE=yes -# LOOKUP_WHOSON=yes - -# These two settings are obsolete; all three lookups are compiled when -# LOOKUP_LSEARCH is enabled. However, we retain these for backward -# compatibility. Setting one forces LOOKUP_LSEARCH if it is not set. - -# LOOKUP_WILDLSEARCH=yes -# LOOKUP_NWILDLSEARCH=yes - - -#------------------------------------------------------------------------------ -# If you have set LOOKUP_LDAP=yes, you should set LDAP_LIB_TYPE to indicate -# which LDAP library you have. Unfortunately, though most of their functions -# are the same, there are minor differences. Currently Exim knows about four -# LDAP libraries: the one from the University of Michigan (also known as -# OpenLDAP 1), OpenLDAP 2, the Netscape SDK library, and the library that comes -# with Solaris 7 onwards. Uncomment whichever of these you are using. - -# LDAP_LIB_TYPE=OPENLDAP1 -# LDAP_LIB_TYPE=OPENLDAP2 -# LDAP_LIB_TYPE=NETSCAPE -# LDAP_LIB_TYPE=SOLARIS - -# If you don't set any of these, Exim assumes the original University of -# Michigan (OpenLDAP 1) library. - - -#------------------------------------------------------------------------------ -# Additional libraries and include directories may be required for some -# lookup styles (e.g. LDAP, MYSQL or PGSQL). LOOKUP_LIBS is included only on -# the command for linking Exim itself, not on any auxiliary programs. You -# don't need to set LOOKUP_INCLUDE if the relevant directories are already -# specified in INCLUDE. The settings below are just examples; -lpq is for -# PostgreSQL, -lgds is for Interbase, -lsqlite3 is for SQLite. - -LOOKUP_INCLUDE=-I /usr/include/mysql -LOOKUP_LIBS=-L/usr/lib/mysql -lmysqlclient - -#------------------------------------------------------------------------------ -# Compiling the Exim monitor: If you want to compile the Exim monitor, a -# program that requires an X11 display, then EXIM_MONITOR should be set to the -# value "eximon.bin". Comment out this setting to disable compilation of the -# monitor. The locations of various X11 directories for libraries and include -# files are defaulted in the OS/Makefile-Default file, but can be overridden in -# local OS-specific make files. - -EXIM_MONITOR=eximon.bin - - -#------------------------------------------------------------------------------ -# Compiling Exim with content scanning support: If you want to compile Exim -# with support for message body content scanning, set WITH_CONTENT_SCAN to -# the value "yes". This will give you malware and spam scanning in the DATA ACL, -# and the MIME ACL. Please read the documentation to learn more about these -# features. - -WITH_CONTENT_SCAN=yes - -# If you want to use the deprecated "demime" condition in the DATA ACL, -# uncomment the line below. Doing so will also explicitly turn on the -# WITH_CONTENT_SCAN option. If possible, use the MIME ACL instead of -# the "demime" condition. - -WITH_OLD_DEMIME=yes - -#------------------------------------------------------------------------------ -# Compiling Exim with experimental features. These are documented in -# experimental-spec.txt. "Experimental" means that the way these features are -# implemented may still change. Backward compatibility is not guaranteed. - -# Uncomment the following lines to add SPF support. You need to have libspf2 -# installed on your system (www.libspf2.org). Depending on where it is installed -# you may have to edit the CFLAGS and LDFLAGS lines. - -# EXPERIMENTAL_SPF=yes -# CFLAGS += -I/usr/local/include -# LDFLAGS += -lspf2 - -# Uncomment the following lines to add SRS (Sender rewriting scheme) support. -# You need to have libsrs_alt installed on your system (srs.mirtol.com). -# Depending on where it is installed you may have to edit the CFLAGS and -# LDFLAGS lines. - -# EXPERIMENTAL_SRS=yes -# CFLAGS += -I/usr/local/include -# LDFLAGS += -lsrs_alt - -# Uncomment the following lines to add Brightmail AntiSpam support. You need -# to have the Brightmail client SDK installed. Please check the experimental -# documentation for implementation details. You need to edit the CFLAGS and -# LDFLAGS lines. - -# EXPERIMENTAL_BRIGHTMAIL=yes -# CFLAGS += -I/opt/brightmail/bsdk-6.0/include -# LDFLAGS += -lxml2_single -lbmiclient_single -L/opt/brightmail/bsdk-6.0/lib - - - -############################################################################### -# THESE ARE THINGS YOU MIGHT WANT TO SPECIFY # -############################################################################### - -# The items in this section are those that are commonly changed according to -# the sysadmin's preferences, but whose defaults are often acceptable. The -# first five are concerned with security issues, where differing levels of -# paranoia are appropriate in different environments. Sysadmins also vary in -# their views on appropriate levels of defence in these areas. If you do not -# understand these issues, go with the defaults, which are used by many sites. - - -#------------------------------------------------------------------------------ -# Although Exim is normally a setuid program, owned by root, it refuses to run -# local deliveries as root by default. There is a runtime option called -# "never_users" which lists the users that must never be used for local -# deliveries. There is also the setting below, which provides a list that -# cannot be overridden at runtime. This guards against problems caused by -# unauthorized changes to the runtime configuration. You are advised not to -# remove "root" from this option, but you can add other users if you want. The -# list is colon-separated. It must NOT contain any spaces. - -# FIXED_NEVER_USERS=root:bin:daemon -FIXED_NEVER_USERS=root - - -#------------------------------------------------------------------------------ -# By default, Exim insists that its configuration file be owned either by root -# or by the Exim user. You can specify one additional permitted owner here. - -# CONFIGURE_OWNER= - -# If the configuration file is group-writeable, Exim insists by default that it -# is owned by root or the Exim user. You can specify one additional permitted -# group owner here. - -# CONFIGURE_GROUP= - -# If you specify CONFIGURE_OWNER or CONFIGURE_GROUP as a name, this is looked -# up at build time, and the uid or gid number is built into the binary. -# However, you can specify that the lookup is deferred until runtime. In this -# case, it is the name that is built into the binary. You can do this by a -# setting of the form: - -# CONFIGURE_OWNER=ref:mail -# CONFIGURE_GROUP=ref:sysadmin - -# In other words, put "ref:" in front of the user or group name. Although this -# costs a bit of resource at runtime, it is convenient to use this feature when -# building binaries that are to be run on multiple systems where the names may -# refer to different uids or gids. It also allows you to build Exim on a system -# where the relevant user or group is not defined. - - -#------------------------------------------------------------------------------ -# The -C option allows Exim to be run with an alternate runtime configuration -# file. When this is used by root or the Exim user, root privilege is retained -# by the binary (for any other caller, it is dropped). You can restrict the -# location of alternate configurations by defining a prefix below. Any file -# used with -C must then start with this prefix (except that /dev/null is also -# permitted if the caller is root, because that is used in the install script). -# If the prefix specifies a directory that is owned by root, a compromise of -# the Exim account does not permit arbitrary alternate configurations to be -# used. The prefix can be more restrictive than just a directory (the second -# example). - -# ALT_CONFIG_PREFIX=/some/directory/ -# ALT_CONFIG_PREFIX=/some/directory/exim.conf- - - -#------------------------------------------------------------------------------ -# If you uncomment the following line, only root may use the -C or -D options -# without losing root privilege. The -C option specifies an alternate runtime -# configuration file, and the -D option changes macro values in the runtime -# configuration. Uncommenting this line restricts what can be done with these -# options. A call to receive a message (either one-off or via a daemon) cannot -# successfully continue to deliver it, because the re-exec of Exim to regain -# root privilege will fail, owing to the use of -C or -D by the Exim user. -# However, you can still use -C for testing (as root) if you do separate Exim -# calls for receiving a message and subsequently delivering it. - -# ALT_CONFIG_ROOT_ONLY=yes - - -#------------------------------------------------------------------------------ -# Uncommenting this option disables the use of the -D command line option, -# which changes the values of macros in the runtime configuration file. -# This is another protection against somebody breaking into the Exim account. - -# DISABLE_D_OPTION=yes - - -#------------------------------------------------------------------------------ -# Exim has support for the AUTH (authentication) extension of the SMTP -# protocol, as defined by RFC 2554. If you don't know what SMTP authentication -# is, you probably won't want to include this code, so you should leave these -# settings commented out. If you do want to make use of SMTP authentication, -# you must uncomment at least one of the following, so that appropriate code is -# included in the Exim binary. You will then need to set up the run time -# configuration to make use of the mechanism(s) selected. - -AUTH_CRAM_MD5=yes -AUTH_CYRUS_SASL=yes -AUTH_DOVECOT=yes -AUTH_PLAINTEXT=yes -# AUTH_SPA=yes - - -#------------------------------------------------------------------------------ -# If you specified AUTH_CYRUS_SASL above, you should ensure that you have the -# Cyrus SASL library installed before trying to build Exim, and you probably -# want to uncomment the following line: - -AUTH_LIBS=-lsasl2 - - -#------------------------------------------------------------------------------ -# When Exim is decoding MIME "words" in header lines, most commonly for use -# in the $header_xxx expansion, it converts any foreign character sets to the -# one that is set in the headers_charset option. The default setting is -# defined by this setting: - -HEADERS_CHARSET="ISO-8859-1" - -# If you are going to make use of $header_xxx expansions in your configuration -# file, or if your users are going to use them in filter files, and the normal -# character set on your host is something other than ISO-8859-1, you might -# like to specify a different default here. This value can be overridden in -# the runtime configuration, and it can also be overridden in individual filter -# files. -# -# IMPORTANT NOTE: The iconv() function is needed for character code -# conversions. Please see the next item... - - -#------------------------------------------------------------------------------ -# Character code conversions are possible only if the iconv() function is -# installed on your operating system. There are two places in Exim where this -# is relevant: (a) The $header_xxx expansion (see the previous item), and (b) -# the Sieve filter support. For those OS where iconv() is known to be installed -# as standard, the file in OS/Makefile-xxxx contains -# -# HAVE_ICONV=yes -# -# If you are not using one of those systems, but have installed iconv(), you -# need to uncomment that line above. In some cases, you may find that iconv() -# and its header file are not in the default places. You might need to use -# something like this: -# -# HAVE_ICONV=yes -# CFLAGS=-O -I/usr/local/include -# EXTRALIBS_EXIM=-L/usr/local/lib -liconv -# -# but of course there may need to be other things in CFLAGS and EXTRALIBS_EXIM -# as well. - - -#------------------------------------------------------------------------------ -# The passwords for user accounts are normally encrypted with the crypt() -# function. Comparisons with encrypted passwords can be done using Exim's -# "crypteq" expansion operator. (This is commonly used as part of the -# configuration of an authenticator for use with SMTP AUTH.) At least one -# operating system has an extended function called crypt16(), which uses up to -# 16 characters of a password (the normal crypt() uses only the first 8). Exim -# supports the use of crypt16() as well as crypt() but note the warning below. - -# You can always indicate a crypt16-encrypted password by preceding it with -# "{crypt16}". If you want the default handling (without any preceding -# indicator) to use crypt16(), uncomment the following line: - -# DEFAULT_CRYPT=crypt16 - -# If you do that, you can still access the basic crypt() function by preceding -# an encrypted password with "{crypt}". For more details, see the description -# of the "crypteq" condition in the manual chapter on string expansions. - -# Some operating systems do not include a crypt16() function, so Exim has one -# of its own, which it uses unless HAVE_CRYPT16 is defined. Normally, that will -# be set in an OS-specific Makefile for the OS that have such a function, so -# you should not need to bother with it. - -# *** WARNING *** WARNING *** WARNING *** WARNING *** WARNING *** -# It turns out that the above is not entirely accurate. As well as crypt16() -# there is a function called bigcrypt() that some operating systems have. This -# may or may not use the same algorithm, and both of them may be different to -# Exim's built-in crypt16() that is used unless HAVE_CRYPT16 is defined. -# -# However, since there is now a move away from the traditional crypt() -# functions towards using SHA1 and other algorithms, tidying up this area of -# Exim is seen as very low priority. In practice, if you need to, you can -# define DEFAULT_CRYPT to the name of any function that has the same interface -# as the traditional crypt() function. -# *** WARNING *** WARNING *** WARNING *** WARNING *** WARNING *** - - -#------------------------------------------------------------------------------ -# Exim can be built to support the SMTP STARTTLS command, which implements -# Transport Layer Security using SSL (Secure Sockets Layer). To do this, you -# must install the OpenSSL library package or the GnuTLS library. Exim contains -# no cryptographic code of its own. Uncomment the following lines if you want -# to build Exim with TLS support. If you don't know what this is all about, -# leave these settings commented out. - -# This setting is required for any TLS support (either OpenSSL or GnuTLS) -#SUPPORT_TLS=yes - -# Uncomment this setting if you are using OpenSSL -#TLS_LIBS=-lssl -lcrypto - -# Test 1 Thales To see if it will work as Slack 12.1 comes with GNUTls - -# Uncomment these settings if you are using GnuTLS -USE_GNUTLS=yes -TLS_LIBS=-lgnutls -lgcrypt - -# If you are running Exim as a server, note that just building it with TLS -# support is not all you need to do. You also need to set up a suitable -# certificate, and tell Exim about it by means of the tls_certificate -# and tls_privatekey run time options. You also need to set tls_advertise_hosts -# to specify the hosts to which Exim advertises TLS support. On the other hand, -# if you are running Exim only as a client, building it with TLS support -# is all you need to do. - -# Additional libraries and include files are required for both OpenSSL and -# GnuTLS. The TLS_LIBS settings above assume that the libraries are installed -# with all your other libraries. If they are in a special directory, you may -# need something like - -# TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto -# or -# TLS_LIBS=-L/opt/gnu/lib -lgnutls -ltasn1 -lgcrypt - -# TLS_LIBS is included only on the command for linking Exim itself, not on any -# auxiliary programs. If the include files are not in a standard place, you can -# set TLS_INCLUDE to specify where they are, for example: - -# TLS_INCLUDE=-I/usr/local/openssl/include/ -# or -# TLS_INCLUDE=-I/opt/gnu/include - -# You don't need to set TLS_INCLUDE if the relevant directories are already -# specified in INCLUDE. - - -#------------------------------------------------------------------------------ -# The default distribution of Exim contains only the plain text form of the -# documentation. Other forms are available separately. If you want to install -# the documentation in "info" format, first fetch the Texinfo documentation -# sources from the ftp directory and unpack them, which should create files -# with the extension "texinfo" in the doc directory. You may find that the -# version number of the texinfo files is different to your Exim version number, -# because the main documentation isn't updated as often as the code. For -# example, if you have Exim version 4.43, the source tarball upacks into a -# directory called exim-4.43, but the texinfo tarball unpacks into exim-4.40. -# In this case, move the contents of exim-4.40/doc into exim-4.43/doc after you -# have unpacked them. Then set INFO_DIRECTORY to the location of your info -# directory. This varies from system to system, but is often /usr/share/info. -# Once you have done this, "make install" will build the info files and -# install them in the directory you have defined. - -# INFO_DIRECTORY=/usr/share/info - - -#------------------------------------------------------------------------------ -# Exim log directory and files: Exim creates several log files inside a -# single log directory. You can define the directory and the form of the -# log file name here. If you do not set anything, Exim creates a directory -# called "log" inside its spool directory (see SPOOL_DIRECTORY above) and uses -# the filenames "mainlog", "paniclog", and "rejectlog". If you want to change -# this, you can set LOG_FILE_PATH to a path name containing one occurrence of -# %s. This will be replaced by one of the strings "main", "panic", or "reject" -# to form the final file names. Some installations may want something like this: - -LOG_FILE_PATH=/var/log/exim/%s.log - -# which results in files with names /var/log/exim_mainlog, etc. The directory -# in which the log files are placed must exist; Exim does not try to create -# it for itself. It is also your responsibility to ensure that Exim is capable -# of writing files using this path name. The Exim user (see EXIM_USER above) -# must be able to create and update files in the directory you have specified. - -# You can also configure Exim to use syslog, instead of or as well as log -# files, by settings such as these - -# LOG_FILE_PATH=syslog -# LOG_FILE_PATH=syslog:/var/log/exim_%slog - -# The first of these uses only syslog; the second uses syslog and also writes -# to log files. Do not include white space in such a setting as it messes up -# the building process. - - -#------------------------------------------------------------------------------ -# When logging to syslog, the following option caters for syslog replacements -# that are able to accept log entries longer than the 1024 characters allowed -# by RFC 3164. It is up to you to make sure your syslog daemon can handle this. -# Non-printable characters are usually unacceptable regardless, so log entries -# are still split on newline characters. - -# SYSLOG_LONG_LINES=yes - -# If you are not interested in the process identifier (pid) of the Exim that is -# making the call to syslog, then comment out the following line. - -SYSLOG_LOG_PID=yes - - -#------------------------------------------------------------------------------ -# Cycling log files: this variable specifies the maximum number of old -# log files that are kept by the exicyclog log-cycling script. You don't have -# to use exicyclog. If your operating system has other ways of cycling log -# files, you can use them instead. The exicyclog script isn't run by default; -# you have to set up a cron job for it if you want it. - -EXICYCLOG_MAX=10 - - -#------------------------------------------------------------------------------ -# The compress command is used by the exicyclog script to compress old log -# files. Both the name of the command and the suffix that it adds to files -# need to be defined here. See also the EXICYCLOG_MAX configuration. - -COMPRESS_COMMAND=/usr/bin/gzip -COMPRESS_SUFFIX=gz - - -#------------------------------------------------------------------------------ -# If the exigrep utility is fed compressed log files, it tries to uncompress -# them using this command. - -ZCAT_COMMAND=/usr/bin/zcat - - -#------------------------------------------------------------------------------ -# Compiling in support for embedded Perl: If you want to be able to -# use Perl code in Exim's string manipulation language and you have Perl -# (version 5.004 or later) installed, set EXIM_PERL to perl.o. Using embedded -# Perl costs quite a lot of resources. Only do this if you really need it. - -# EXIM_PERL=perl.o - - -#------------------------------------------------------------------------------ -# Support for dynamically-loaded string expansion functions via ${dlfunc. If -# you are using gcc the dynamically-loaded object must be compiled with the -# -shared option, and you will need to add -export-dynamic to EXTRALIBS so -# that the local_scan API is made available by the linker. You may also need -# to add -ldl to EXTRALIBS so that dlopen() is available to Exim. - -# EXPAND_DLFUNC=yes - - -#------------------------------------------------------------------------------ -# Exim has support for PAM (Pluggable Authentication Modules), a facility -# which is available in the latest releases of Solaris and in some GNU/Linux -# distributions (see http://ftp.kernel.org/pub/linux/libs/pam/). The Exim -# support, which is intended for use in conjunction with the SMTP AUTH -# facilities, is included only when requested by the following setting: - -# SUPPORT_PAM=yes - -# You probably need to add -lpam to EXTRALIBS, and in some releases of -# GNU/Linux -ldl is also needed. - - -#------------------------------------------------------------------------------ -# Support for authentication via Radius is also available. The Exim support, -# which is intended for use in conjunction with the SMTP AUTH facilities, -# is included only when requested by setting the following parameter to the -# location of your Radius configuration file: - -# RADIUS_CONFIG_FILE=/etc/radiusclient/radiusclient.conf -# RADIUS_CONFIG_FILE=/etc/radius.conf - -# If you have set RADIUS_CONFIG_FILE, you should also set one of these to -# indicate which RADIUS library is used: - -# RADIUS_LIB_TYPE=RADIUSCLIENT -# RADIUS_LIB_TYPE=RADIUSCLIENTNEW -# RADIUS_LIB_TYPE=RADLIB - -# RADIUSCLIENT is the radiusclient library; you probably need to add -# -lradiusclient to EXTRALIBS. -# -# The API for the radiusclient library was changed at release 0.4.0. -# Unfortunately, the header file does not define a version number that clients -# can use to support both the old and new APIs. If you are using version 0.4.0 -# or later of the radiusclient library, you should use RADIUSCLIENTNEW. -# -# RADLIB is the Radius library that comes with FreeBSD (the header file is -# called radlib.h); you probably need to add -lradius to EXTRALIBS. -# -# If you do not set RADIUS_LIB_TYPE, Exim assumes the radiusclient library, -# using the original API. - - -#------------------------------------------------------------------------------ -# Support for authentication via the Cyrus SASL pwcheck daemon is available. -# Note, however, that pwcheck is now deprecated in favour of saslauthd (see -# next item). The Exim support for pwcheck, which is intented for use in -# conjunction with the SMTP AUTH facilities, is included only when requested by -# setting the following parameter to the location of the pwcheck daemon's -# socket. -# -# There is no need to install all of SASL on your system. You just need to run -# ./configure --with-pwcheck, cd to the pwcheck directory within the sources, -# make and make install. You must create the socket directory (default -# /var/pwcheck) and chown it to exim's user and group. Once you have installed -# pwcheck, you should arrange for it to be started by root at boot time. - -# CYRUS_PWCHECK_SOCKET=/var/pwcheck/pwcheck - - -#------------------------------------------------------------------------------ -# Support for authentication via the Cyrus SASL saslauthd daemon is available. -# The Exim support, which is intented for use in conjunction with the SMTP AUTH -# facilities, is included only when requested by setting the following -# parameter to the location of the saslauthd daemon's socket. -# -# There is no need to install all of SASL on your system. You just need to run -# ./configure --with-saslauthd (and any other options you need, for example, to -# select or deselect authentication mechanisms), cd to the saslauthd directory -# within the sources, make and make install. You must create the socket -# directory (default /var/state/saslauthd) and chown it to exim's user and -# group. Once you have installed saslauthd, you should arrange for it to be -# started by root at boot time. - -# CYRUS_SASLAUTHD_SOCKET=/var/state/saslauthd/mux - - -#------------------------------------------------------------------------------ -# TCP wrappers: If you want to use tcpwrappers from within Exim, uncomment -# this setting. See the manual section entitled "Use of tcpwrappers" in the -# chapter on building and installing Exim. -# -#USE_TCP_WRAPPERS=yes -# -# You may well also have to specify a local "include" file and an additional -# library for TCP wrappers, so you probably need something like this: -# -USE_TCP_WRAPPERS=yes -CFLAGS=-O -I/usr/include -EXTRALIBS_EXIM=-lwrap -# -# but of course there may need to be other things in CFLAGS and EXTRALIBS_EXIM -# as well. - - -#------------------------------------------------------------------------------ -# The default action of the exim_install script (which is run by "make -# install") is to install the Exim binary with a unique name such as -# exim-4.43-1, and then set up a symbolic link called "exim" to reference it, -# moving the symbolic link from any previous version. If you define NO_SYMLINK -# (the value doesn't matter), the symbolic link is not created or moved. You -# will then have to "turn Exim on" by setting up the link manually. - -# NO_SYMLINK=yes - - -#------------------------------------------------------------------------------ -# Another default action of the install script is to install a default runtime -# configuration file if one does not exist. This configuration has a router for -# expanding system aliases. The default assumes that these aliases are kept -# in the traditional file called /etc/aliases. If such a file does not exist, -# the installation script creates one that contains just comments (no actual -# aliases). The following setting can be changed to specify a different -# location for the system alias file. - -SYSTEM_ALIASES_FILE=/etc/aliases - - -#------------------------------------------------------------------------------ -# There are some testing options (-be, -bt, -bv) that read data from the -# standard input when no arguments are supplied. By default, the input lines -# are read using the standard fgets() function. This does not support line -# editing during interactive input (though the terminal's "erase" character -# works as normal). If your operating system has the readline() function, and -# in addition supports dynamic loading of library functions, you can cause -# Exim to use readline() for the -be testing option (only) by uncommenting the -# following setting. Dynamic loading is used so that the library is loaded only -# when the -be testing option is given; by the time the loading occurs, -# Exim has given up its root privilege and is running as the calling user. This -# is the reason why readline() is NOT supported for -bt and -bv, because Exim -# runs as root or as exim, respectively, for those options. When USE_READLINE -# is "yes", as well as supporting line editing, a history of input lines in the -# current run is maintained. - -# USE_READLINE=yes - -# You may need to add -ldl to EXTRALIBS when you set USE_READLINE=yes. -# Note that this option adds to the size of the Exim binary, because the -# dynamic loading library is not otherwise included. - - - -############################################################################### -# THINGS YOU ALMOST NEVER NEED TO MENTION # -############################################################################### - -# The settings in this section are available for use in special circumstances. -# In the vast majority of installations you need not change anything below. - - -#------------------------------------------------------------------------------ -# The following commands live in different places in some OS. Either the -# ultimate default settings, or the OS-specific files should already point to -# the right place, but they can be overridden here if necessary. These settings -# are used when building various scripts to ensure that the correct paths are -# used when the scripts are run. They are not used in the Makefile itself. Perl -# is not necessary for running Exim unless you set EXIM_PERL (see above) to get -# it embedded, but there are some utilities that are Perl scripts. If you -# haven't got Perl, Exim will still build and run; you just won't be able to -# use those utilities. - -# CHOWN_COMMAND=/usr/bin/chown -# CHGRP_COMMAND=/usr/bin/chgrp -# MV_COMMAND=/bin/mv -# RM_COMMAND=/bin/rm -# PERL_COMMAND=/usr/bin/perl - - -#------------------------------------------------------------------------------ -# The following macro can be used to change the command for building a library -# of functions. By default the "ar" command is used, with options "cq". -# Only in rare circumstances should you need to change this. - -# AR=ar cq - - -#------------------------------------------------------------------------------ -# In some operating systems, the value of the TMPDIR environment variable -# controls where temporary files are created. Exim does not make use of -# temporary files, except when delivering to MBX mailboxes. However, if Exim -# calls any external libraries (e.g. DBM libraries), they may use temporary -# files, and thus be influenced by the value of TMPDIR. For this reason, when -# Exim starts, it checks the environment for TMPDIR, and if it finds it is set, -# it replaces the value with what is defined here. Commenting this setting -# suppresses the check altogether. - -TMPDIR="/tmp" - - -#------------------------------------------------------------------------------ -# The following macros can be used to change the default modes that are used -# by the appendfile transport. In most installations the defaults are just -# fine, and in any case, you can change particular instances of the transport -# at run time if you want. - -# APPENDFILE_MODE=0600 -# APPENDFILE_DIRECTORY_MODE=0700 -# APPENDFILE_LOCKFILE_MODE=0600 - - -#------------------------------------------------------------------------------ -# In some installations there may be multiple machines sharing file systems, -# where a different configuration file is required for Exim on the different -# machines. If CONFIGURE_FILE_USE_NODE is defined, then Exim will first look -# for a configuration file whose name is that defined by CONFIGURE_FILE, -# with the node name obtained by uname() tacked on the end, separated by a -# period (for example, /usr/exim/configure.host.in.some.domain). If this file -# does not exist, then the bare configuration file name is tried. - -# CONFIGURE_FILE_USE_NODE=yes - - -#------------------------------------------------------------------------------ -# In some esoteric configurations two different versions of Exim are run, -# with different setuid values, and different configuration files are required -# to handle the different cases. If CONFIGURE_FILE_USE_EUID is defined, then -# Exim will first look for a configuration file whose name is that defined -# by CONFIGURE_FILE, with the effective uid tacked on the end, separated by -# a period (for eximple, /usr/exim/configure.0). If this file does not exist, -# then the bare configuration file name is tried. In the case when both -# CONFIGURE_FILE_USE_EUID and CONFIGURE_FILE_USE_NODE are set, four files -# are tried: <name>.<euid>.<node>, <name>.<node>, <name>.<euid>, and <name>. - -# CONFIGURE_FILE_USE_EUID=yes - - -#------------------------------------------------------------------------------ -# The size of the delivery buffers: These specify the sizes (in bytes) of -# the buffers that are used when copying a message from the spool to a -# destination. There is rarely any need to change these values. - -# DELIVER_IN_BUFFER_SIZE=8192 -# DELIVER_OUT_BUFFER_SIZE=8192 - - -#------------------------------------------------------------------------------ -# The mode of the database directory: Exim creates a directory called "db" -# in its spool directory, to hold its databases of hints. This variable -# determines the mode of the created directory. The default value in the -# source is 0750. - -# EXIMDB_DIRECTORY_MODE=0750 - - -#------------------------------------------------------------------------------ -# Database file mode: The mode of files created in the "db" directory defaults -# to 0640 in the source, and can be changed here. - -# EXIMDB_MODE=0640 - - -#------------------------------------------------------------------------------ -# Database lock file mode: The mode of zero-length files created in the "db" -# directory to use for locking purposes defaults to 0640 in the source, and -# can be changed here. - -# EXIMDB_LOCKFILE_MODE=0640 - - -#------------------------------------------------------------------------------ -# This parameter sets the maximum length of the header portion of a message -# that Exim is prepared to process. The default setting is one megabyte. The -# limit exists in order to catch rogue mailers that might connect to your SMTP -# port, start off a header line, and then just pump junk at it for ever. The -# message_size_limit option would also catch this, but it may not be set. -# The value set here is the default; it can be changed at runtime. - -# HEADER_MAXSIZE="(1024*1024)" - - -#------------------------------------------------------------------------------ -# The mode of the input directory: The input directory is where messages are -# kept while awaiting delivery. Exim creates it if necessary, using a mode -# which can be defined here (default 0750). - -# INPUT_DIRECTORY_MODE=0750 - - -#------------------------------------------------------------------------------ -# The mode of Exim's log directory, when it is created by Exim inside the spool -# directory, defaults to 0750 but can be changed here. - -# LOG_DIRECTORY_MODE=0750 - - -#------------------------------------------------------------------------------ -# The log files themselves are created as required, with a mode that defaults -# to 0640, but which can be changed here. - -# LOG_MODE=0640 - - -#------------------------------------------------------------------------------ -# The TESTDB lookup is for performing tests on the handling of lookup results, -# and is not useful for general running. It should be included only when -# debugging the code of Exim. - -# LOOKUP_TESTDB=yes - - -#------------------------------------------------------------------------------ -# /bin/sh is used by default as the shell in which to run commands that are -# defined in the makefiles. This can be changed if necessary, by uncommenting -# this line and specifying another shell, but note that a Bourne-compatible -# shell is expected. - -# MAKE_SHELL=/bin/sh - - -#------------------------------------------------------------------------------ -# The maximum number of named lists of each type (address, domain, host, and -# local part) can be increased by changing this value. It should be set to -# a multiple of 16. - -# MAX_NAMED_LIST=16 - - -#------------------------------------------------------------------------------ -# Network interfaces: Unless you set the local_interfaces option in the runtime -# configuration file to restrict Exim to certain interfaces only, it will run -# code to find all the interfaces there are on your host. Unfortunately, -# the call to the OS that does this requires a buffer large enough to hold -# data for all the interfaces - it was designed in the days when a host rarely -# had more than three or four interfaces. Nowadays hosts can have very many -# virtual interfaces running on the same hardware. If you have more than 250 -# virtual interfaces, you will need to uncomment this setting and increase the -# value. - -# MAXINTERFACES=250 - - -#------------------------------------------------------------------------------ -# Per-message logs: While a message is in the process of being delivered, -# comments on its progress are written to a message log, for the benefit of -# human administrators. These logs are held in a directory called "msglog" -# in the spool directory. Its mode defaults to 0750, but can be changed here. -# The message log directory is also used for storing files that are used by -# transports for returning data to a message's sender (see the "return_output" -# option for transports). - -# MSGLOG_DIRECTORY_MODE=0750 - - -#------------------------------------------------------------------------------ -# There are three options which are used when compiling the Perl interface and -# when linking with Perl. The default values for these are placed automatically -# at the head of the Makefile by the script which builds it. However, if you -# want to override them, you can do so here. - -# PERL_CC= -# PERL_CCOPTS= -# PERL_LIBS= - - -#------------------------------------------------------------------------------ -# Identifying the daemon: When an Exim daemon starts up, it writes its pid -# (process id) to a file so that it can easily be identified. The path of the -# file can be specified here. Some installations may want something like this: - -PID_FILE_PATH=/var/run/exim.pid - -# If PID_FILE_PATH is not defined, Exim writes a file in its spool directory -# using the name "exim-daemon.pid". - -# If you start up a daemon without the -bd option (for example, with just -# the -q15m option), a pid file is not written. Also, if you override the -# configuration file with the -oX option, no pid file is written. In other -# words, the pid file is written only for a "standard" daemon. - - -#------------------------------------------------------------------------------ -# If Exim creates the spool directory, it is given this mode, defaulting in the -# source to 0750. - -# SPOOL_DIRECTORY_MODE=0750 - - -#------------------------------------------------------------------------------ -# The mode of files on the input spool which hold the contents of messages can -# be changed here. The default is 0640 so that information from the spool is -# available to anyone who is a member of the Exim group. - -# SPOOL_MODE=0640 - - -#------------------------------------------------------------------------------ -# Moving frozen messages: If the following is uncommented, Exim is compiled -# with support for automatically moving frozen messages out of the main spool -# directory, a facility that is found useful by some large installations. A -# run time option is required to cause the moving actually to occur. Such -# messages become "invisible" to the normal management tools. - -# SUPPORT_MOVE_FROZEN_MESSAGES=yes - - -#------------------------------------------------------------------------------ -# Disabling the use of fsync(): DO NOT UNCOMMENT THE FOLLOWING LINE unless you -# really, really, really know what you are doing. And even then, think again. -# You should never uncomment this when compiling a binary for distribution. -# Use it only when compiling Exim for your own use. -# -# Uncommenting this line enables the use of a runtime option called -# disable_fsync, which can be used to stop Exim using fsync() to ensure that -# files are written to disc before proceeding. When this is disabled, crashes -# and hardware problems such as power outages can cause data to be lost. This -# feature should only be used in very exceptional circumstances. YOU HAVE BEEN -# WARNED. - -# ENABLE_DISABLE_FSYNC=yes - -# End of EDITME for Exim 4. diff --git a/network/exim/exim.SlackBuild b/network/exim/exim.SlackBuild deleted file mode 100644 index 3c2dd64f10..0000000000 --- a/network/exim/exim.SlackBuild +++ /dev/null @@ -1,123 +0,0 @@ -#!/bin/sh - -# Slackware build script for Exim -# http://www.exim.org/ -# Copyright 2008 Thales A. Tsailas (ttsailas@enforcingit.com) -# All rights reserved. -# -# Redistribution and use of this script, with or without modification, is -# permitted provided that the following conditions are met: -# -# 1. Redistributions of this script must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO -# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -# *Extensively* edited by the SlackBuilds.org project. -michiel. - -PRGNAM=exim -VERSION=4.69 -ARCH=${ARCH:-i486} -BUILD=${BUILD:-1} -TAG=${TAG:-_SBo} - -CWD=$(pwd) -TMP=${TMP:-/tmp/SBo} -PKG=$TMP/package-$PRGNAM -OUTPUT=${OUTPUT:-/tmp} - -EXIMUSER=${EXIMUSER:-exim} -EXIMGROUP=${EXIMGROUP:-exim} -EXIMUID=${EXIMUID:-222} -EXIMGID=${EXIMGID:-222} - -if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mtune=i686" -elif [ "$ARCH" = "i686" ]; then - SLKCFLAGS="-O2 -march=i686 -mtune=i686" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" -fi - -# Exit on most errors -set -e - -# Check if the exim and user group exist. If not, then bail -if ! grep ^${EXIMGROUP}: /etc/group 2>&1 > /dev/null; then -cat << EOF - - You must have a ${EXIMGROUP} group to run this script. - For example: groupadd -g ${EXIMGID} ${EXIMGROUP} - -EOF - exit -elif ! grep ^${EXIMUSER}: /etc/passwd 2>&1 > /dev/null; then - cat << EOF - - You must have a ${EXIMUSER} user to run this script. - For example: useradd -u ${EXIMUID} -d /var/spool/exim -s /bin/false -g ${EXIMGROUP} ${EXIMUSER} - -EOF - exit -fi - -rm -rf $PKG -mkdir -p $TMP $PKG $OUTPUT -cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.gz -cd $PRGNAM-$VERSION -chown -R root:root . -find . \ - \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ - -exec chmod 755 {} \; -o \ - \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ - -exec chmod 644 {} \; - -# Set the right compiler flags and settings. -# Edit {exim,eximon.Makefile} if you want to change any of these. -sed -e "s/#SLKCFLAGS#/$SLKCFLAGS/" $CWD/exim.Makefile > $TMP/$PRGNAM-$VERSION/Local/Makefile -sed -e "s/#SLKCFLAGS#/$SLKCFLAGS/" $CWD/eximon.Makefile > $TMP/$PRGNAM-$VERSION/Local/eximon.conf - -make all -make install DESTDIR=$PKG - -( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -) - -mkdir -p $PKG/usr/man/man8 -cat doc/$PRGNAM.8 > $PKG/usr/man/man8/$PRGNAM.8 -gzip -9 $PKG/usr/man/man8/$PRGNAM.8 - -mkdir -p $PKG/etc/{logrotate.d,rc.d} -cat $CWD/rc.exim.new > $PKG/etc/rc.d/rc.exim.new -cat $CWD/$PRGNAM.logrotate > $PKG/etc/logrotate.d/$PRGNAM -mv $PKG/etc/exim/exim.conf $PKG/etc/exim/exim.conf.new -mv $PKG/etc/aliases $PKG/etc/aliases.new - -mkdir -p $PKG/var/log/exim -mkdir -p -m 0750 $PKG/var/spool/exim/ -mkdir -p -m 0750 $PKG/var/spool/exim/{db,input,msglog} -chown -R $EXIMUSER:$EXIMGROUP $PKG/var/{log,spool}/exim - -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION -cp -a ABOUT ACKNOWLEDGMENTS LICENCE CHANGES doc/* $PKG/usr/doc/$PRGNAM-$VERSION -cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild - -mkdir -p $PKG/install -cat $CWD/slack-desc > $PKG/install/slack-desc -cat $CWD/doinst.sh > $PKG/install/doinst.sh - -cd $PKG -/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz diff --git a/network/exim/exim.info b/network/exim/exim.info deleted file mode 100644 index e502cf107d..0000000000 --- a/network/exim/exim.info +++ /dev/null @@ -1,8 +0,0 @@ -PRGNAM="exim" -VERSION="4.69" -HOMEPAGE="http://www.exim.org/" -DOWNLOAD="ftp://ftp.exim.org/pub/exim/exim4/exim-4.69.tar.gz" -MD5SUM="56e8db1dfe31e0ee4cef85e8940ceedc" -MAINTAINER="Thales A. Tsailas" -EMAIL="ttsailas@enforcingit.com" -APPROVED="michiel" diff --git a/network/exim/exim.logrotate b/network/exim/exim.logrotate deleted file mode 100644 index 4e83629e2c..0000000000 --- a/network/exim/exim.logrotate +++ /dev/null @@ -1,7 +0,0 @@ -# daemon does not need restarting after log rotate -/var/log/exim/*log { - missingok - notifempty - delaycompress -} - diff --git a/network/exim/eximon.Makefile b/network/exim/eximon.Makefile deleted file mode 100644 index 8560ea7c4b..0000000000 --- a/network/exim/eximon.Makefile +++ /dev/null @@ -1,182 +0,0 @@ -# $Cambridge: exim/exim-src/exim_monitor/EDITME,v 1.1 2004/10/07 10:39:01 ph10 Exp $ - -################################################## -# The Exim Monitor # -################################################## - -# This is the template for the Exim monitor's main build-time configuration -# file. It contains settings that are independent of any operating system. It -# should be edited and then saved to a file called Local/eximon.conf before -# running the make command to build the monitor, if any settings are required. -# Local/eximon.conf can be empty if no changes are needed. The examples given -# here (commented out) are the default settings. - -# Any settings made in the configuration file can be overridden at run time -# by setting up an environment variable with the same name as any of these -# options, but preceded by EXIMON_, for example, EXIMON_WINDOW_TITLE. - -CFLAGS="##SLKCFLAGS#" - -################################################################## -# Set these variables as appropriate for your system # -################################################################## - -# The qualifying name for your domain. The only use made of this is for -# testing that certain addresses are the same when displaying the -# log tail, and for shortening sender addresses in the queue display. - -# QUALIFY_DOMAIN= - -# The default minimum width and height for the whole window are 103 and -# 162 pixels respectively. This is enough to hold the left-most stripchart -# and the quit button. The values can be changed here. - -# MIN_HEIGHT=162 -# MIN_WIDTH=103 - -# If you uncomment the following setting, the window will start up at -# its minimum size, instead of the default maximum. There may be a quick -# flash during the start-up process. Defining it this way allows it to be -# overridden by an environment variable. - -# START_SMALL=${EXIMON_START_SMALL-yes} - -# The title for eximon's main display window. It is possible to have -# host name of the machine you are running on substituted into the -# title string. If you include the string ${fullhostname} then the -# complete name is used. If you include ${hostname} then the full -# host name will have the string contained in the DOMAIN variable -# stripped from its right-hand end before being substituted. Any other -# shell or environment variables may also be included. - -# If you use any substitutions, remember to ensure that the $ and {} -# characters are escaped from the shell, e.g. by using single quotes. - -# WINDOW_TITLE="${hostname} eximon" - -# The domain that you want to be stripped from the machine's full hostname -# when forming the short host name for the eximon window title, as -# described above. - -# DOMAIN= - -# Parameters for the rolling display of the tail of the exim log file. -# The width and depth are measured in pixels; LOG_BUFFER specifies the -# amount of store to set aside for holding the log tail, which is displayed -# in a scrolling window. When this store is full, the earlier 50% of it -# is discarded - this is much more efficient that throwing it away line -# by line. The number given can be followed by the letter K to indicate -# that the value is in kilobytes. A minimum value of 1K is enforced. - -# LOG_DEPTH=300 -# LOG_WIDTH=950 -# LOG_BUFFER=20K - -# The font which is used in the log tail display. This is defined in -# the normal X manner. It must be a "character cell" font, because this -# is required by the text widget. - -# LOG_FONT=-misc-fixed-medium-r-normal-*-14-140-*-*-*-*-iso8859-1 - -# Parameters for the display of message that are on the exim queue. -# The width and depth are measured in pixels. - -# QUEUE_DEPTH=200 -# QUEUE_WIDTH=950 - -# The font which is used in the queue display. - -# QUEUE_FONT=$LOG_FONT - -# When a message has more than one undelivered address, they are listed -# one below the other. A limit can be placed on the number of addresses -# displayed for any one message. If there are more, then "..." is used -# to indicate this. - -# QUEUE_MAX_ADDRESSES=10 - -# The display of the contents of the queue is updated every QUEUE_INTERVAL -# seconds by default (there is a button to request update). - -# QUEUE_INTERVAL=300 - -# The size of the popup text window that is used for looking at the -# contents of messages, etc. - -# TEXT_DEPTH=200 - -# The keystroke/mouse-operation that is used to pop up the menu in the -# queue window is configurable. The default is Shift with the lefthand -# mouse button. The name of an alternative can be specified in the standard -# X way of naming these things. With the default configuration for the monitor, -# individuals can override this by setting the EXIMON_MENU_EVENT environment -# variable. - -# MENU_EVENT='Shift<Btn1Down>' - -# When the menu is used to perform an operation on a message, the result of the -# operation is normally visible in the log window, so Eximon doesn't display -# the output of the generated Exim command. However, you can request that -# this output be shown in a separate window by setting ACTION_OUTPUT to "yes". -# This does not apply to the output generated from attempting to deliver a -# message, which is always shown. - -# ACTION_OUTPUT=no - -# When some action is taken on a message, such as freezing it, or changing -# its recipients, the queue display is normally automatically updated. On -# systems that have very large queues, this can take some time and be dis- -# tracting. If this option is set to "no", the queue display is no longer -# automatically updated after an action is applied to a message. - -# ACTION_QUEUE_UPDATE=yes - -# When the menu item to display a message's body is invoked, the amount -# of data is limited to BODY_MAX bytes. This limit is a safety precaution -# to save the screen scrolling for ever on an enormous message. - -# BODY_MAX=20000 - -# The stripcharts are updated every STRIPCHART_INTERVAL seconds. - -# STRIPCHART_INTERVAL=60 - -# A stripchart showing the count of messages in the queue is always -# displayed on the left of eximon's window. Its name is "queue" by -# default, but can be changed by this variable. - -# QUEUE_STRIPCHART_NAME=queue - -# The following variable may be set to the name of a disc partition. If -# it is, a stripchart showing the percentage fullness of the partition -# will be displayed as the second stripchart. This can be used to keep -# a display of a mail spool partition on the screen. - -# SIZE_STRIPCHART=/var/mail - -# The name of the size stripchart will be the last component of SIZE_STRIPCHART -# unless the following variable is set to override it. - -# SIZE_STRIPCHART_NAME=space - -# The following variable contains a specification of which stripcharts -# you want eximon to display based on log entries. The string consists of -# pairs of strings, delimited by slash characters. The first string in each -# pair is a regular expression that matches some distinguishing feature in a -# exim log entry. - -# Entries that match the expression will be counted and displayed in a -# stripchart whose title is given by the second string. The string may -# be continued over several input lines, provided that it is split -# after a slash, and an additional slash (optionally preceded by white -# space) is included at the start of the continuation line. - -# Stripcharts configured by the following parameter are displayed to the -# right of the queue and size stripcharts, in the order defined here. - -# LOG_STRIPCHARTS='/ <= /in/ -# / => /out/ -# / => .+ R=local/local/ -# / => .+ T=[^ ]*smtp/smtp/' - -# End of exim_monitor/EDITME diff --git a/network/exim/rc.exim.new b/network/exim/rc.exim.new deleted file mode 100644 index 4902203dfb..0000000000 --- a/network/exim/rc.exim.new +++ /dev/null @@ -1,61 +0,0 @@ -#!/bin/sh - -# /etc/rc.d/rc.exim - start/stop/restart the exim mail transfer agent. -# To make exim start automatically at boot, make this -# file executable: chmod 755 /etc/rc.d/rc.exim -# -# Thales A. Tsailas <ttsailas@enforcingit.com> - -PIDFILE=/var/run/exim.pid - -# the TIME option causes Exim to run as a daemon, starting a queue runner -# process at intervals specified by the given time value. (ie 5m, 1h etc). -TIME=15m - -exim_start() { - # Make sure that we have the right ownerships permissions. - if [ -f /var/log/exim/main.log ]; then - if [ "exim" != "$(/bin/stat -c%G /var/log/exim/main.log)" ]; then - chown -R exim:exim /var/{log,spool}/exim - fi - fi - - # Lets start the Exim daemon - echo -en "Starting exim... \n" - /usr/sbin/exim -bd -q$TIME -} - -exim_stop() { - echo -en "Shutting down exim...\n" - killall exim - rm -f $PIDFILE -} - -exim_status() { - if [ -f /var/run/exim.pid ]; then - echo "exim (pid: $(cat $PIDFILE) is running..."; - else - echo "exim is not running..."; - fi -} - -# See how we were called. -case "$1" in - start) - exim_start - ;; - stop) - exim_stop - ;; - restart) - exim_stop - sleep 2 - exim_start - ;; - status) - status - ;; - *) - echo $"Usage: $0 {start|stop|restart|status}" - exit 1 -esac diff --git a/network/exim/slack-desc b/network/exim/slack-desc deleted file mode 100644 index c9cc9d3ae5..0000000000 --- a/network/exim/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler------------------------------------------------------| -exim: exim (the exim mail transfer agent) -exim: -exim: Exim is a mail transfer agent (MTA) used on Unix-like operating systems. -exim: It is freely available under the GNU GPL and it aims to be a general -exim: and flexible mailer with extensive facilities for checking incoming -exim: e-mail. Exim was written by Philip Hazel for use in the University of -exim: Cambridge Computing Service’s e-mail systems. -exim: -exim: -exim: Homepage: http://www.exim.org/ -exim: |