8 files changed, 0 insertions, 243 deletions
diff --git a/system/watchdog/README b/system/watchdog/README
deleted file mode 100644
index 04588c79f3..0000000000
--- a/system/watchdog/README
+++ /dev/null
@@ -1,6 +0,0 @@
-Linux watchdog timer daemon
-
-This service periodically writes to /dev/watchdog - in the event
-of it _not_ being able to do so, Linux may reset the system.
-
-See also: README.SLACKWARE
diff --git a/system/watchdog/README.SLACKWARE b/system/watchdog/README.SLACKWARE
deleted file mode 100644
index f42f476043..0000000000
--- a/system/watchdog/README.SLACKWARE
+++ /dev/null
@@ -1,25 +0,0 @@
-For this to work, a kernel driver for the aformentioned device needs
-to be loaded.  The module may be found in:
-  /lib/modules/`uname -r`/kernel/drivers/watchdog
-
-It can be configured to try and fix things (such as networking)
-before triggering a reboot. As 'repair.sh' may be able to do.
-See the examples included in /usr/doc/watchdog-*/examples
-
-This package also contains the 'wd_keepalive' program by Marcel Jansen
-which "can be run during critical periods when the normal watcdog
-shouldn't be run. It will read from the same configuration file;
-it will do no checks but will keep writing to the device.
-
-To enable the watchdog: make sure a kernel module gets loaded for it
-(at boot) such as the 'softdog' or an actual hardware driver... 
-
-If you don't understand what this is all about, maybe watch:
-http://www.youtube.com/watch?v=GV_1p3n1fkU
-
-Then add the following to rc.local:
-
-# Start the watchdog timer deamon
-if [ -x /etc/rc.d/rc.watchdog ]; then
-  /etc/rc.d/rc.watchdog start
-fi
diff --git a/system/watchdog/config/rc.watchdog b/system/watchdog/config/rc.watchdog
deleted file mode 100644
index 7e07dff61f..0000000000
--- a/system/watchdog/config/rc.watchdog
+++ /dev/null
@@ -1,43 +0,0 @@
-#!/bin/sh
-#
-# /etc/rc.d/rc.watchdog
-#
-# Start/stop/restart the watchdog timer service.
-
-watchdog_start() {
-  if [ ! -e /dev/watchdog ]; then
-    echo "$0: No /dev/watchdog device node seems to exist on this system."
-    echo "$0: A kernel module probably needs to be loaded; please see:"
-    echo "$0: /usr/src/linux/Documentation/watchdog/watchdog-api.txt"
-    exit 0
-  fi
-  if [ -x /usr/sbin/watchdog -a -r /etc/watchdog.conf ]; then
-    echo "Starting the watchdog timer service:  /usr/sbin/watchdog"
-    /usr/sbin/watchdog
-  fi
-}
-
-watchdog_stop() {
-  killall watchdog
-}
-
-watchdog_restart() {
-  watchdog_stop
-  sleep 10 # can take a while to die
-  watchdog_start
-}
-
-case "$1" in
-'start')
-  watchdog_start
-  ;;
-'stop')
-  watchdog_stop
-  ;;
-'restart')
-  watchdog_restart
-  ;;
-*)
-  echo $"Usage: $0 {start|stop|restart}"
-esac
-
diff --git a/system/watchdog/doinst.sh b/system/watchdog/doinst.sh
deleted file mode 100644
index 9d8334e29c..0000000000
--- a/system/watchdog/doinst.sh
+++ /dev/null
@@ -1,23 +0,0 @@
-config() {
-  NEW="$1"
-  OLD="$(dirname $NEW)/$(basename $NEW .new)"
-  # If there's no config file by that name, mv it over:
-  if [ ! -r $OLD ]; then
-    mv $NEW $OLD
-  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
-    # toss the redundant copy
-    rm $NEW
-  fi
-  # Otherwise, we leave the .new copy for the admin to consider...
-}
-
-# Keep same perms on rc.watchdog:
-if [ -e etc/rc.d/rc.watchdog ]; then
-  cp -a etc/rc.d/rc.watchdog etc/rc.d/rc.watchdog.new.incoming
-  cat etc/rc.d/rc.watchdog.new > etc/rc.d/rc.watchdog.new.incoming
-  mv etc/rc.d/rc.watchdog.new.incoming etc/rc.d/rc.watchdog.new
-fi
-
-config etc/rc.d/rc.watchdog.new
-config etc/watchdog.conf.new
-
diff --git a/system/watchdog/patches/watchdog-5.9-slackware.diff b/system/watchdog/patches/watchdog-5.9-slackware.diff
deleted file mode 100644
index 022d7b7394..0000000000
--- a/system/watchdog/patches/watchdog-5.9-slackware.diff
+++ /dev/null
@@ -1,22 +0,0 @@
---- watchdog-5.4.orig/examples/repair.sh	2006-07-30 05:50:06.000000000 -0500
-+++ watchdog-5.9/examples/repair.sh	2008-03-02 12:58:08.086346303 -0600
-@@ -48,6 +48,9 @@
- 	elif [ -x /etc/init.d/networking ]; then
- 		# Debian
- 		/etc/init.d/networking stop
-+	elif [ -x /etc/rc.d/rc.inet1 ]; then
-+		# Slackware
-+		/etc/rc.d/rc.inet1 stop
- 	else
- 		ifconfig |
- 		awk '/Link/ {print $1}' |
-@@ -79,6 +82,9 @@
- elif [ -x /etc/rc.d/init.d/network ]; then
-     # Redhat
-     /etc/rc.d/init.d/network start
-+elif [ -x /etc/rc.d/rc.inet1 ]; then
-+    # Slackware
-+    /etc/rc.d/rc.inet1 start
- else
-     echo "Couldn't find network script to relaunch networking. Please edit $0" | logger -i -t repair -p daemon.info 
-     exit $1
diff --git a/system/watchdog/slack-desc b/system/watchdog/slack-desc
deleted file mode 100644
index 1a7557f1d5..0000000000
--- a/system/watchdog/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-        |-----handy-ruler-----------------------------------------------------|
-watchdog: watchdog (Linux watchdog timer daemon)
-watchdog:
-watchdog: This service periodically writes to /dev/watchdog - in the event
-watchdog: of it _not_ being able to do so; Linux may reset the system.
-watchdog:
-watchdog: It can be configured to try and fix things (such as networking)
-watchdog: before going about triggering reboot.
-watchdog:
-watchdog: The watchdog was written and is maintained by Michael Meskes
-watchdog: (based on example code by Alan Cox).
-watchdog:
diff --git a/system/watchdog/watchdog.SlackBuild b/system/watchdog/watchdog.SlackBuild
deleted file mode 100644
index b5348407a7..0000000000
--- a/system/watchdog/watchdog.SlackBuild
+++ /dev/null
@@ -1,95 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for watchdog
-
-# Written by Menno Duursma <druiloor@zonnet.nl>
-
-# This program is free software. It comes without any warranty.
-# Granted WTFPL, Version 2, as published by Sam Hocevar. See
-# http://sam.zoy.org/wtfpl/COPYING for more details.
-
-PRGNAM=watchdog
-VERSION=${VERSION:-5.9}
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) ARCH=i486 ;;
-    arm*) ARCH=arm ;;
-       *) ARCH=$( uname -m ) ;;
-  esac
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-set -e # Exit on most errors
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-$VERSION
-tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
-cd $PRGNAM-$VERSION
-chown -R root:root .
-chmod -R u+w,go+r-w,a-s .
-
-# Apply the Slackware support scripts patch
-patch -p1 --verbose < $CWD/patches/$PRGNAM-$VERSION-slackware.diff
-
-CFLAGS="$SLKCFLAGS" \
-CXXFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --sysconfdir=/etc \
-  --localstatedir=/var \
-  --mandir=/usr/man \
-  --docdir=/usr/doc/$PRGNAM-$VERSION \
-  --build=$ARCH-slackware-linux
-
-make
-make install-strip DESTDIR=$PKG
-
-# Move config to .new; let doinst.sh handle it further
-mv $PKG/etc/$PRGNAM.conf $PKG/etc/$PRGNAM.conf.new
-
-# Add init script too
-install -D -m755 $CWD/config/rc.$PRGNAM $PKG/etc/rc.d/rc.$PRGNAM.new
-
-# Install the repair script
-install -D -m755 examples/repair.sh $PKG/usr/sbin/repair
-
-find $PKG/usr/man -type f -exec gzip -9 {} \;
-for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a [A-Z][A-Z]* ChangeLog examples $PKG/usr/doc/$PRGNAM-$VERSION
-# Add the Debian doc for additional reference
-cp -a debian/README.debian $PKG/usr/doc/$PRGNAM-$VERSION
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-cat $CWD/README.SLACKWARE > $PKG/usr/doc/$PRGNAM-$VERSION/README.SLACKWARE
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-cat $CWD/doinst.sh > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/system/watchdog/watchdog.info b/system/watchdog/watchdog.info
deleted file mode 100644
index c93679d0a4..0000000000
--- a/system/watchdog/watchdog.info
+++ /dev/null
@@ -1,10 +0,0 @@
-PRGNAM="watchdog"
-VERSION="5.9"
-HOMEPAGE="http://sourceforge.net/projects/watchdog"
-DOWNLOAD="http://sourceforge.net/projects/watchdog/files/watchdog/5.9/watchdog-5.9.tar.gz"
-MD5SUM="d7cae3c9829f5d9a680764f314234867"
-DOWNLOAD_x86_64=""
-MD5SUM_x86_64=""
-MAINTAINER="Menno Duursma"
-EMAIL="druiloor@zonnet.nl"
-APPROVED="Erik Hanson"