summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--system/gpsd/README35
-rw-r--r--system/gpsd/doinst.sh30
-rw-r--r--system/gpsd/gpsd.SlackBuild56
-rw-r--r--system/gpsd/gpsd.hotplug124
-rw-r--r--system/gpsd/gpsd.hotplug.wrapper41
-rw-r--r--system/gpsd/gpsd.info8
-rw-r--r--system/gpsd/rc.gpsd.conf.new14
-rw-r--r--system/gpsd/rc.gpsd.new60
-rw-r--r--system/gpsd/slack-desc10
-rw-r--r--system/gpsd/xgps.desktop9
-rw-r--r--system/gpsd/xgpsspeed.desktop9
11 files changed, 373 insertions, 23 deletions
diff --git a/system/gpsd/README b/system/gpsd/README
index 5a1d1b8508..a111f54615 100644
--- a/system/gpsd/README
+++ b/system/gpsd/README
@@ -1,8 +1,31 @@
-gpsd is a service daemon that monitors one or more GPSes attached to a
-host computer through serial or USB ports, making all data on the location,
-course, and velocity available to be queried on TCP port 2947 of the host
-computer. With gpsd, multiple GPS client applications (such as navigational
-and wardriving software) can share access to GPSes without contention or
-loss of data. Applications that presently use gpsd include Viking and Kismet.
+gpsd is a service daemon that monitors one or more GPSes attached to
+a host computer through serial or USB ports, making all data on the
+location, course, and velocity available to be queried on TCP port
+2947 of the host computer. With gpsd, multiple GPS client applications
+(such as navigational and wardriving software) can share access to GPSes
+without contention or loss of data. Applications that presently use
+gpsd include Viking and Kismet.
See README.build for some additional build options that might be useful.
+
+To enable automatic startup of gpsd at boot time, or when a GPS device is
+connected via USB, you need to do the following three steps:
+
+1. Edit the file /lib/udev/rules.d/97-gpsd.rules and uncomment the line
+(or lines) beginning '#ATTRS' that corresponds to your GPS hardware and
+save it in /etc/udev/rules.d/. To avoid confusion with other USB serial
+devices that you might have, do not uncomment lines that do not
+correspond to your GPS hardware.
+
+2. Make the file /etc/rc.d/rc.gpsd executable.
+ chmod +x /etc/rc.d/rc.gpsd
+
+3. Add the following lines to /etc/rc.d/rc.local
+ if [ -x /etc/rc.d/rc.gpsd ]; then
+ /etc/rc.d/rc.gpsd start
+ fi
+
+Configuration options may be set in the file /etc/rc.d/rc.gpsd.conf. The
+defaults will usually be adequate. However, if your GPS is on a real (non-USB)
+serial port -- for example, /dev/ttyS0 -- you should add /dev/ttyS0 to
+GPS_DEVICES in /etc/rc.d/rc.gpsd.conf.
diff --git a/system/gpsd/doinst.sh b/system/gpsd/doinst.sh
new file mode 100644
index 0000000000..81e9fca8c2
--- /dev/null
+++ b/system/gpsd/doinst.sh
@@ -0,0 +1,30 @@
+config() {
+ NEW="$1"
+ OLD="$(dirname $NEW)/$(basename $NEW .new)"
+ # If there's no config file by that name, mv it over:
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+ # toss the redundant copy
+ rm $NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+preserve_perms() {
+ NEW="$1"
+ OLD="$(dirname $NEW)/$(basename $NEW .new)"
+ if [ -e $OLD ]; then
+ cp -a $OLD ${NEW}.incoming
+ cat $NEW > ${NEW}.incoming
+ mv ${NEW}.incoming $NEW
+ fi
+ config $NEW
+}
+
+preserve_perms etc/rc.d/rc.gpsd.new
+config etc/rc.d/rc.gpsd.conf.new
+
+if [ -x /usr/bin/update-desktop-database ]; then
+ /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1
+fi
diff --git a/system/gpsd/gpsd.SlackBuild b/system/gpsd/gpsd.SlackBuild
index e9c0adc5f6..62962e1390 100644
--- a/system/gpsd/gpsd.SlackBuild
+++ b/system/gpsd/gpsd.SlackBuild
@@ -1,12 +1,29 @@
#!/bin/sh
# Slackware build script for gpsd
-# Written by David Spencer <baildon.research@googlemail.com>
-# This script is dedicated to the public domain
+# Copyright 2011 David Spencer, Baildon, West Yorkshire, U.K.
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
PRGNAM=gpsd
-VERSION=${VERSION:-2.96}
-BUILD=${BUILD:-1}
+VERSION=${VERSION:-2.95}
+BUILD=${BUILD:-2}
TAG=${TAG:-_SBo}
if [ -z "$ARCH" ]; then
@@ -57,9 +74,7 @@ rm -rf $PKG
mkdir -p $TMP $PKG $OUTPUT
cd $TMP
rm -rf $PRGNAM-$VERSION
-# 2.96 has a tarball pathname snafu
-TARVERSION="${VERSION}bis"
-tar xvf $CWD/$PRGNAM-$TARVERSION.tar.gz
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
cd $PRGNAM-$VERSION
chown -R root:root .
chmod -R u+w,go+r-w,a-s .
@@ -84,17 +99,42 @@ CXXFLAGS="$SLKCFLAGS" \
make
-make install-strip DESTDIR=$PKG
+# --no-print-directory prevents crazy gps-2.94-py2.6.egg-info install path
+# (thanks again Niels Horn!)
+make --no-print-directory install-strip DESTDIR=$PKG
find $PKG/usr/man -type f -exec gzip -9 {} \;
for i in $(find $PKG/usr/man -type l) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+install -D -m 0644 $CWD/xgps.desktop \
+ $PKG/usr/share/applications/xgps.desktop
+install -D -m 0644 $CWD/xgpsspeed.desktop \
+ $PKG/usr/share/applications/xgpsspeed.desktop
+install -D -m 0644 packaging/X11/gpsd-logo.png \
+ $PKG/usr/share/pixmaps/gpsd-logo.png
+
+# Use hotplug scripts from gpsd-3.0 instead of 2.95 -- they work ;-)
+install -D -m 0755 $CWD/gpsd.hotplug \
+ $PKG/lib/udev/gpsd.hotplug
+install -D -m 0755 $CWD/gpsd.hotplug.wrapper \
+ $PKG/lib/udev/gpsd.hotplug.wrapper
+mkdir -p $PKG/lib/udev/rules.d
+cat gpsd.rules | \
+ sed 's/^ATTRS/#&/' \
+ >$PKG/lib/udev/rules.d/97-gpsd.rules
+
+install -D -m 0644 $CWD/rc.gpsd.new \
+ $PKG/etc/rc.d/rc.gpsd.new
+install -D -m 0644 $CWD/rc.gpsd.conf.new \
+ $PKG/etc/rc.d/rc.gpsd.conf.new
+
mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
cp -a AUTHORS COPYING INSTALL README TODO $PKG/usr/doc/$PRGNAM-$VERSION
cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
mkdir -p $PKG/install
cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
cd $PKG
/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/system/gpsd/gpsd.hotplug b/system/gpsd/gpsd.hotplug
new file mode 100644
index 0000000000..805f941998
--- /dev/null
+++ b/system/gpsd/gpsd.hotplug
@@ -0,0 +1,124 @@
+#!/usr/bin/python
+#
+# This file is Copyright (c) 2010 by the GPSD project
+# BSD terms apply: see the file COPYING in the distribution root for details.
+#
+# Hotplug script for gpsd by Eric S. Raymond, March 2005
+# This script is part of the gpsd distribution: see http://gpsd.berlios.de
+# Can be called like "gpsd.hotplug [add|remove] /dev/ttyUSB0" for test
+# purposes.
+import sys, time, os, syslog, glob, socket, stat
+
+CONTROL_SOCKET = os.getenv('GPSD_SOCKET') or "/var/run/gpsd.sock"
+GPSD_OPTIONS = os.getenv('GPSD_OPTIONS') or ""
+
+WHEREAMI = __file__
+
+def gpsd_control_connect(complain=True):
+ "Acquire a connection to the GPSD control socket."
+ if not os.path.exists(CONTROL_SOCKET):
+ syslog.syslog("socket %s doesn't exist" % CONTROL_SOCKET)
+ return None
+ try:
+ sock = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM, 0)
+ sock.connect(CONTROL_SOCKET)
+ except socket.error, msg:
+ if complain:
+ syslog.syslog("socket %s creation failure: %s" % (CONTROL_SOCKET, msg))
+ if sock:
+ sock.close()
+ sock = None
+ #else:
+ # syslog.syslog("socket %s created OK" % CONTROL_SOCKET)
+ return sock
+
+def gpsd_control(action, argument):
+ "Pass a command to gpsd; start the daemon if not already running."
+ syslog.syslog("gpsd_control(action=%s, arg=%s)" % (action, argument))
+ connect = gpsd_control_connect(complain=False)
+ if connect:
+ syslog.syslog("reached a running gpsd")
+ elif action == 'add':
+ gpsdcmd = "gpsd %s -F %s" % (GPSD_OPTIONS, CONTROL_SOCKET)
+ syslog.syslog("launching %s" % gpsdcmd)
+ os.system(gpsdcmd)
+ connect = gpsd_control_connect(complain=True)
+ if not connect:
+ syslog.syslog("can't reach gpsd")
+ return None
+ # We've got a live connection to the gpsd control socket. No
+ # need to parse the response, because gpsd will lock on to the
+ # device if it's really a GPS and ignore it if it's not.
+ if action == 'add':
+ # Force the group-read & group-write bits on, so gpsd will still be
+ # able to use this device after dropping root privileges.
+ os.chmod(argument, stat.S_IMODE(os.stat(argument)[stat.ST_MODE])|0660)
+ connect.sendall("+%s\r\n" % argument)
+ connect.recv(12)
+ elif action == 'remove':
+ connect.sendall("-%s\r\n" % argument)
+ connect.recv(12)
+ elif action == 'send':
+ connect.sendall("%s\r\n" % argument)
+ connect.recv(12)
+ connect.close()
+ #syslog.syslog("gpsd_control ends")
+ return action
+
+def hotplug(action, devpath):
+ #syslog.syslog("ACTION=%s DEVPATH=%s" % (action,devpath))
+ if not devpath:
+ syslog.syslog("No device")
+ else:
+ subnodes = glob.glob("/sys" + devpath + "/*")
+ subnodes = map(os.path.basename, subnodes)
+ subnodes = filter(lambda s: s.startswith("ttyUSB"), subnodes)
+ if len(subnodes) == 0:
+ syslog.syslog("no ttyUSB device under " + devpath)
+ return
+ elif len(subnodes) > 1:
+ syslog.syslog("too many ttyUSB devices under " + devpath)
+ return
+ else:
+ tty = "/dev/" + subnodes[0]
+
+ syslog.syslog("waiting for " + tty)
+ while not os.path.exists(tty):
+ time.sleep(1)
+ syslog.syslog(tty + " has gone active")
+
+ gpsd_control(action, tty)
+
+ remover = os.getenv("REMOVER")
+ #syslog.syslog("REMOVER=%s" % remover)
+ fp = open(remover, "w")
+ fp.write(WHEREAMI + " remove " + tty)
+ fp.close()
+ os.chmod(remover, stat.S_IRUSR|stat.S_IXUSR|stat.S_IRGRP|stat.S_IXGRP)
+ return
+
+if __name__ == '__main__':
+ # In recent versions of udev, the gpsd script runs in series with
+ # the task that creates the real /dev/ttyUSB0 device
+ # node. Unfortunately, the gpsd script runs BEFORE the creation of
+ # the node, and the node is not created until after you kill the
+ # gpsd script, because the gpsd script waits forever for the node
+ # to appear.
+ #
+ # This is a race condition, and is best fixed by running the
+ # actual wait/hotplug portion in the background.
+ pid = os.fork()
+ if not pid:
+ syslog.openlog('gpsd.hotplug', 0, syslog.LOG_DAEMON)
+ try:
+ if len(sys.argv) == 1: # Called as hotplug script
+ hotplug(os.getenv("ACTION"), os.getenv("DEVPATH"))
+ else: # Called by hand for testing
+ gpsd_control(sys.argv[1], sys.argv[2])
+ except:
+ (exc_type, exc_value, exc_traceback) = sys.exc_info()
+ syslog.syslog("gpsd.hotplug: exception %s yields %s" % (exc_type, exc_value))
+ raise exc_type, exc_value, exc_traceback
+ #syslog.syslog("gpsd.hotplug ends")
+ syslog.closelog()
+
diff --git a/system/gpsd/gpsd.hotplug.wrapper b/system/gpsd/gpsd.hotplug.wrapper
new file mode 100644
index 0000000000..429db379ce
--- /dev/null
+++ b/system/gpsd/gpsd.hotplug.wrapper
@@ -0,0 +1,41 @@
+#!/bin/sh
+#
+# This file is Copyright (c) 2010 by the GPSD project
+# BSD terms apply: see the file COPYING in the distribution root for details.
+# [Modified to add Slackware-friendly conf file]
+
+PATH=/usr/sbin:$PATH
+export PATH
+
+if [ -r /etc/default/gpsd ]; then
+ . /etc/default/gpsd
+elif [ -r /etc/sysconfig/gpsd ]; then
+ . /etc/sysconfig/gpsd
+ GPSD_OPTIONS=$OPTIONS
+ GPSD_SOCKET=$CONTROL_SOCKET
+elif [ -r /etc/rc.d/rc.gpsd.conf ]; then
+ . /etc/rc.d/rc.gpsd.conf
+fi
+
+if [ -n "$GPSD_OPTIONS" ]; then
+ export GPSD_OPTIONS
+fi
+if [ -n "$GPSD_SOCKET" ]; then
+ export GPSD_SOCKET
+fi
+
+if [ -n "$USBAUTO" ]; then
+ [ "$USBAUTO" = "true" ] || exit 0
+fi
+
+if [ "$ACTION" = "remove" ] ; then
+ if echo $DEVLINKS | grep -q /dev/gps; then
+ exec /lib/udev/gpsd.hotplug "$ACTION" "$DEVNAME"
+ fi
+ exit 0
+fi
+
+if [ -x /usr/bin/python ]; then
+ exec /lib/udev/gpsd.hotplug "$ACTION" "$DEVNAME"
+fi
+
diff --git a/system/gpsd/gpsd.info b/system/gpsd/gpsd.info
index 47d9e66b96..f62ee8172f 100644
--- a/system/gpsd/gpsd.info
+++ b/system/gpsd/gpsd.info
@@ -1,10 +1,10 @@
PRGNAM="gpsd"
-VERSION="2.96"
+VERSION="2.95"
HOMEPAGE="http://gpsd.berlios.de/"
-DOWNLOAD="http://download.berlios.de/gpsd/gpsd-2.96bis.tar.gz"
-MD5SUM="52b00cab0fb34bbf1923ae35c7ced6c4"
+DOWNLOAD="http://download.berlios.de/gpsd/gpsd-2.95.tar.gz"
+MD5SUM="12535a9ed9fecf9ea2c5bdc9840da5ae"
DOWNLOAD_x86_64=""
MD5SUM_x86_64=""
MAINTAINER="David Spencer"
EMAIL="baildon.research@googlemail.com"
-APPROVED="Niels Horn"
+APPROVED="dsomero"
diff --git a/system/gpsd/rc.gpsd.conf.new b/system/gpsd/rc.gpsd.conf.new
new file mode 100644
index 0000000000..3566b69c08
--- /dev/null
+++ b/system/gpsd/rc.gpsd.conf.new
@@ -0,0 +1,14 @@
+# /etc/rc.d/rc.gpsd.conf
+# Configuration settings for gpsd
+
+# If your GPS is on a real (non-USB) serial port, add /dev/ttyS<n> here,
+# for example
+# GPSD_DEVICES="/dev/gps* /dev/ttyS1"
+GPSD_DEVICES="/dev/gps*"
+
+# Command line options for the gpsd daemon, see 'man gpsd' for details.
+# The most likely options that you might want to set include -b and -n.
+GPSD_OPTIONS=""
+
+# Control socket pathname. It's unlikely you'll want to change this.
+GPSD_SOCKET="/var/run/gpsd.sock"
diff --git a/system/gpsd/rc.gpsd.new b/system/gpsd/rc.gpsd.new
new file mode 100644
index 0000000000..0eee30306a
--- /dev/null
+++ b/system/gpsd/rc.gpsd.new
@@ -0,0 +1,60 @@
+#!/bin/sh
+
+# /etc/rc.d/rc.gpsd
+# Start/stop/restart gpsd
+# Sebastian Arcus and David Spencer
+#
+# To enable automatic discovery of your GPS device by udev, uncomment the
+# appropriate line of /etc/udev/rules.d/97-gpsd.rules
+#
+# Configuration options may be set in /etc/rc.d/rc.gpsd.conf
+# but the defaults will usually be adequate.
+
+gpsd_start() {
+
+ if [ ! -x /lib/udev/gpsd.hotplug.wrapper ]; then
+ echo "$(basename $0): /lib/udev/gpsd.hotplug.wrapper not found (or not executable); cannot start."
+ fi
+
+ if [ -r /etc/rc.d/rc.gpsd.conf ]; then
+ . /etc/rc.d/rc.gpsd.conf
+ fi
+ # Set config defaults in case the .conf file was absent or bogus
+ GPSD_DEVICES="${GPSD_DEVICES:-/dev/gps*}"
+ GPSD_OPTIONS="${GPSD_OPTIONS:-}"
+ GPSD_SOCKET="${GPSD_SOCKET:-/var/run/gpsd.sock}"
+
+ for DEVNAME in $GPSD_DEVICES; do
+ if [ -e $DEVNAME ]; then
+ echo "$(basename $0): Starting gpsd for $DEVNAME"
+ ACTION=add DEVNAME=$DEVNAME /lib/udev/gpsd.hotplug.wrapper
+ else
+ echo "$(basename $0): $DEVNAME not found, gpsd not started"
+ fi
+ done
+
+}
+
+gpsd_stop() {
+ echo "Stopping gpsd..."
+ killall gpsd >/dev/null 2>&1
+ return 0
+}
+
+case "$1" in
+ start)
+ gpsd_start
+ ;;
+ stop)
+ gpsd_stop
+ ;;
+ restart)
+ gpsd_stop
+ sleep 1
+ gpsd_start
+ ;;
+ *)
+ echo "Usage: $0 start|stop|restart"
+ exit 1
+ ;;
+esac
diff --git a/system/gpsd/slack-desc b/system/gpsd/slack-desc
index 30eba3cd67..fd614fa133 100644
--- a/system/gpsd/slack-desc
+++ b/system/gpsd/slack-desc
@@ -8,11 +8,11 @@
|-----handy-ruler------------------------------------------------------|
gpsd: gpsd (GPS service daemon)
gpsd:
-gpsd: gpsd is a service daemon that monitors one or more GPSes attached to
-gpsd: a host computer through serial or USB ports, making all data on the
-gpsd: location/course/velocity available to be queried on TCP port 2947
-gpsd: of the host computer. With gpsd, multiple GPS client applications
-gpsd: (such as navigational and wardriving software) can share access to
+gpsd: gpsd is a service daemon that monitors one or more GPSes attached to
+gpsd: a host computer through serial or USB ports, making all data on the
+gpsd: location/course/velocity available to be queried on TCP port 2947
+gpsd: of the host computer. With gpsd, multiple GPS client applications
+gpsd: (such as navigational and wardriving software) can share access to
gpsd: GPSes without contention or loss of data.
gpsd:
gpsd: Homepage: http://gpsd.berlios.de/
diff --git a/system/gpsd/xgps.desktop b/system/gpsd/xgps.desktop
new file mode 100644
index 0000000000..dc61b1264b
--- /dev/null
+++ b/system/gpsd/xgps.desktop
@@ -0,0 +1,9 @@
+[Desktop Entry]
+Name=xgps
+GenericName=GPS information
+Comment=Display GPS information from a gpsd daemon
+Exec=xgps
+Icon=/usr/share/pixmaps/gpsd-logo.png
+Terminal=false
+Type=Application
+Categories=Utility;
diff --git a/system/gpsd/xgpsspeed.desktop b/system/gpsd/xgpsspeed.desktop
new file mode 100644
index 0000000000..c327074411
--- /dev/null
+++ b/system/gpsd/xgpsspeed.desktop
@@ -0,0 +1,9 @@
+[Desktop Entry]
+Name=xgpsspeed
+GenericName=GPS speedometer
+Comment=Display GPS speed from a gpsd daemon
+Exec=xgpsspeed
+Icon=/usr/share/pixmaps/gpsd-logo.png
+Terminal=false
+Type=Application
+Categories=Utility;