system/atarisio: Removed (build failure)

  This appears to be related to kernel version...

13 files changed, 0 insertions, 773 deletions

diff --git a/system/atarisio/999-atarisio.rules.in b/system/atarisio/999-atarisio.rules.in
deleted file mode 100644
index fe39ef930e..0000000000
--- a/system/atarisio/999-atarisio.rules.in
+++ /dev/null
@@ -1 +0,0 @@
-KERNEL=="atarisio*", MODE="0660", GROUP="@GROUP@"
diff --git a/system/atarisio/README b/system/atarisio/README
deleted file mode 100644
index 61deb9faed..0000000000
--- a/system/atarisio/README
+++ /dev/null
@@ -1,32 +0,0 @@
-atarisio (disk emulator for use with Atari 8-bit computer and SIO2PC)
-
-AtariSIO allows a Linux system to act as one or more disk drives,
-a printer, and/or a cassette drive for an Atari 8-bit (400/800/XL/XE)
-computer, using an SIO2PC cable.
-
-Even without SIO2PC or a real Atari, this package includes some utilities
-that are useful for manipulating and examining Atari disk, tape, and
-executable images.
-
-A real 16550A UART (or close derivative) is required. In particular,
-atarisio does NOT work with USB to RS232 adaptors.
-
-========================================================================
-= READ README.Slackware about the SETUID and GROUP variables           =
-= before building the package!                                         =
-========================================================================
-
-Before you can run atariserver or atarixfer, you will need the atarisio
-kernel module loaded. If you're dedicating a serial port for use with
-atariserver, you can add the following line to /etc/rc.d/rc.modules or
-rc.local (as you prefer):
-
-/sbin/modprobe atarisio port=/dev/ttyS0
-
-(Replace ttyS0 if you're using a different serial port, of course)
-
-If you need to use your serial port for other purposes, it's a little
-less cut-and-dried. You will have to either manually modprobe and rmmod
-the module as needed, or write yourself a script to do the job (possibly
-also starting up agetty when the module is unloaded, or SLIP mode if
-you're using FujiChat on your Atari, etc etc).
diff --git a/system/atarisio/README.Slackware b/system/atarisio/README.Slackware
deleted file mode 100644
index aabe7090a4..0000000000
--- a/system/atarisio/README.Slackware
+++ /dev/null
@@ -1,58 +0,0 @@
-Before you can run atariserver or atarixfer, you will need the atarisio
-kernel module loaded. If you're dedicating a serial port for use with
-atariserver, you can add the following line to /etc/rc.d/rc.modules or
-rc.local (as you prefer):
-
-/sbin/modprobe atarisio port=/dev/ttyS0
-
-(Replace ttyS0 if you're using a different serial port, of course)
-
-If you need to use your serial port for other purposes, it's a little
-less cut-and-dried. You will have to either manually modprobe and rmmod
-the module as needed, or write yourself a script to do the job (possibly
-also starting up agetty when the module is unloaded, or SLIP mode if
-you're using FujiChat on your Atari, etc etc).
-
-#### READ THIS! ####
-
-By default, atariserver and atarixfer are installed setuid root,
-group owner "users". This is done for two reasons: (a) so the programs
-can access the /dev/atarisio* devices, and (b) so they can set POSIX
-realtime scheduling mode, which prevents timing issues that can cause
-SIO frames to be retransmitted or (on a loaded system) dropped.
-
-If run setuid root, atariserver and atarixfer will drop their root
-privileges after setting realtime mode and opening the device.
-There are no currently known exploits against atarisio, but the code
-hasn't exactly been audited by the NSA either.
-
-You have several options here:
-
-1. The default. Simply run the script. On a single-user system, this is
-reasonable, though it's the least secure. atariserver and atarixfer will
-be setuid root, and runnable by anyone in the users group.
-
-2. Run atariserver and atarixfer setuid root, but restrict access to
-some group other than "users". To do this, run the script as:
-
-# SETUID=yes GROUP=wheel ./atarisio.SlackBuild
-
-(replace "wheel" with any other group, as you prefer).
-This option is more secure than option 1 and outperforms option 3.
-
-3. Run atariserver and atarixfer as a normal user. This can cause
-performance problems, but on most setups it works OK (on some systems,
-it may not work at all). To do this, run the script as:
-
-# SETUID=no ./atarisio.SlackBuild
-
-This should be more secure than 1 or 2.
-
-4. Same as 3, but extra paranoid: use a group other than "users" (I like
-"wheel", but you could create your own "atarisio" group if you really
-want), and be very picky about who you add to the group.
-
-# SETUID=no GROUP=wheel ./atarisio.SlackBuild
-
-Like option 3, this may cause performance problems or prevent the app
-from working at all.
diff --git a/system/atarisio/atarisio.SlackBuild b/system/atarisio/atarisio.SlackBuild
deleted file mode 100644
index 63e3d11b75..0000000000
--- a/system/atarisio/atarisio.SlackBuild
+++ /dev/null
@@ -1,88 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for atarisio
-
-# Written by B. Watson (yalhcru@gmail.com)
-
-PRGNAM=atarisio
-VERSION=20100113
-ARCH=${ARCH:-i486}
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-KERNEL=${KERNEL:-$(uname -r)}
-KERNELPATH=${KERNELPATH:-/lib/modules/$KERNEL/build}
-PKG_VERS=${VERSION}_$(echo $KERNEL | tr - _)
-
-SRCVER=$( echo $VERSION | sed 's/^..//' )
-
-SETUID=${SETUID:-yes}
-GROUP=${GROUP:-users}
-
-# No need for LIBDIRSUFFIX here, no /usr/lib dir in package.
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-fi
-
-set -e
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-$SRCVER
-tar xvf $CWD/$PRGNAM-$SRCVER.tar.gz
-cd $PRGNAM-$SRCVER
-chown -R root:root .
-chmod -R a-s,u+w,go+r-w .
-
-sed -i "s/^\\(C.*FLAGS *= *\\)-g/\1$SLKCFLAGS/" Makefile
-
-make
-mkdir -p $PKG/usr/{include,bin} $PKG/lib/modules/$KERNEL/misc
-make install INST_DIR=$PKG/usr MDIR=$PKG/lib/modules/$KERNEL/misc
-
-# Hias forgot to add a couple of useful tools to his "make install" rule:
-cp tools/casinfo $PKG/usr/bin
-
-strip $PKG/usr/bin/*
-chown -R root:root $PKG/usr/bin
-
-if [ "$SETUID" = "yes" ]; then
-	chown root:$GROUP $PKG/usr/bin/{atariserver,atarixfer}
-	chmod 4710 $PKG/usr/bin/{atariserver,atarixfer}
-else
-	chmod 0755 $PKG/usr/bin/{atariserver,atarixfer}
-fi
-
-
-mkdir -p $PKG/lib/udev/rules.d
-sed 's/@GROUP@/'$GROUP'/g' \
-  < $CWD/999-$PRGNAM.rules.in \
-  > $PKG/lib/udev/rules.d/999-$PRGNAM.rules
-
-mkdir -p $PKG/usr/man/man1
-cd $CWD/man
-  for i in *.1; do
-    gzip -9c $i > $PKG/usr/man/man1/$i.gz
-  done
-cd -
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$PKG_VERS
-cp $CWD/README.Slackware README LICENSE Changelog $PKG/usr/doc/$PRGNAM-$PKG_VERS
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$PKG_VERS/$PRGNAM.SlackBuild
-
-mkdir -p $PKG/install
-cat $CWD/doinst.sh > $PKG/install/doinst.sh
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$PKG_VERS-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/system/atarisio/atarisio.info b/system/atarisio/atarisio.info
deleted file mode 100644
index 0d4412aca4..0000000000
--- a/system/atarisio/atarisio.info
+++ /dev/null
@@ -1,10 +0,0 @@
-PRGNAM="atarisio"
-VERSION="20100113"
-HOMEPAGE="http://www.horus.com/~hias/atari/"
-DOWNLOAD="http://www.horus.com/~hias/atari/atarisio/atarisio-100113.tar.gz"
-MD5SUM="9c57517620ddac22f9e750678a0e72ee"
-DOWNLOAD_x86_64=""
-MD5SUM_x86_64=""
-MAINTAINER="B. Watson"
-EMAIL="yalhcru@gmail.com"
-APPROVED="dsomero"
diff --git a/system/atarisio/doinst.sh b/system/atarisio/doinst.sh
deleted file mode 100644
index d3b55d1299..0000000000
--- a/system/atarisio/doinst.sh
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/bin/sh
-
-if [ -x sbin/depmod ]; then
-	chroot . /sbin/depmod -a
-fi
-
-# Ensure that udevd knows what's up with the atarisio device(s)...
-# If you're on Slack 12.1 or older, the --reload-rules needs to be
-# replaced with --reload_rules below.
-
-if [ -x sbin/udevadm ]; then
-	sbin/udevadm control --reload-rules 2>/dev/null
-fi
diff --git a/system/atarisio/man/adir.1 b/system/atarisio/man/adir.1
deleted file mode 100644
index 9dbb2286d9..0000000000
--- a/system/atarisio/man/adir.1
+++ /dev/null
@@ -1,55 +0,0 @@
-.TH ADIR "1" "April 2007" "adir (atarisio 0.30)" "HiassofT Atari 8-bit Tools"
-.SH NAME
-adir \- print the directory of an Atari DOS floppy disk image
-
-.SH SYNOPSIS
-.B adir
-[\fB\-\fR\fI<columns>\fR] [\fB\-r\fR] [\fB\-t\fR] \fIimage-filename\fR [\fI...\fR]
-
-.SH DESCRIPTION
-adir prints the directory of one or more DOS 2.x or MyDOS floppy images
-(ATR, XFD, or DCM (DiskComm) format). Output resembles the output of the Atari DOS
-\fBA\fR command. Single, enhanced 1050, double, and high-capacity
-(hard disk) images are supported.
-
-.SH OPTIONS
-.TP
-\fB\-\fR\fI<columns>\fR
-Number of columns for output format. Default is \fB\-4\fR. This option is
-ignored if \fB\-r\fR is given.
-.TP
-\fB\-r\fR
-Raw format: list the contents of all directory entries that have been used,
-including those containing deleted files. Output consists of 6 columns:
-.sp 1
-.PD 0
-.RS
-.IP "File number"
-.IP "Status flags (in hex)"
-.IP "File name (8 characters)"
-.IP "File extension (3 characters)"
-.IP "Starting sector"
-.IP "File size in sectors"
-.RE
-.PD 1
-.
-.TP
-\fB-t\fR
-Recursively print directory tree of image. Only useful for MyDOS-formatted
-disk images.
-.TP
-\fIimage-filename\fR [\fI...\fR]
-One or more Atari DOS or MyDOS-compatible disk image files
-(ATR, XFD, or DCM format). SpartaDOS-formatted images are \fBnot\fR supported.
-
-.SH
-AUTHOR
-Matthias Reichl <\fBhias@horus.com\fR>
-.PP
-Man page by B. Watson <\fBurchlay@urchlay.com\fB>
-
-.SH
-SEE ALSO
-\&\fIatariserver\fR\|(1), \&\fIatarixfer\fR\|(1), \&\fIdir2atr\fR\|(1).
-.PP
-AtariSIO home page: \fBhttp://www.horus.com/~hias/atari/\fR
diff --git a/system/atarisio/man/ataricom.1 b/system/atarisio/man/ataricom.1
deleted file mode 100644
index 45a4a98604..0000000000
--- a/system/atarisio/man/ataricom.1
+++ /dev/null
@@ -1,41 +0,0 @@
-.TH ATARICOM "1" "April 2009" "ataricom (atarisio 0.30)" "HiassofT Atari 8-bit Tools"
-.SH NAME
-ataricom \- utility for manipulating Atari 8\-bit executable files
-.SH SYNOPSIS
-ataricom [\fIoptions\fR]... file [outfile]
-.SH DESCRIPTION
-ataricom performs various useful operations on Atari 8\-bit executable
-files. These files are also known as binary load files, or COM, BIN, XEX, OBJ, OBX, et al. These
-are only names; there is only one Atari 8\-bit executable file format.
-.SH OPTIONS
-.TP
-\fB\-c\fR address
-create COM file from raw data file
-.TP
-\fB\-r\fR address
-add RUN block with specified address at end of file
-.TP
-\fB\-i\fR address
-add INIT block with specified address at end of file
-.TP
-\fB\-b\fR start[\-end]
-only process specified blocks
-.TP
-\fB\-x\fR start[\-end]
-exclude specified blocks
-.TP
-\fB\-m\fR start\-end
-merge specified blocks
-.HP
-\fB\-s\fR block,adr... split block at given addresses
-.TP
-\fB\-n\fR
-write raw data blocks (no COM headers)
-.SH AUTHOR
-Matthias Reichl <\fBhias@horus.com\fR>
-.PP
-Man page by B. Watson <\fBurchlay@urchlay.com\fB>
-.SH SEE ALSO
-\&\fIatariserver\fR\|(1), \&\fIdir2atr\fR\|(1), \&\fIadir\fR\|(1).
-.PP
-AtariSIO home page: \fBhttp://www.horus.com/~hias/atari/\fR
diff --git a/system/atarisio/man/atariserver.1 b/system/atarisio/man/atariserver.1
deleted file mode 100644
index 6226bb55c7..0000000000
--- a/system/atarisio/man/atariserver.1
+++ /dev/null
@@ -1,230 +0,0 @@
-.TH ATARISERVER "1" "April 2007" "atariserver (atarisio 0.30)" "HiassofT Atari 8-bit Tools"
-.SH
-NAME
-\fBatariserver\fR \- SIO server (peripheral emulator) for Atari 8\-bit computers, for use with an SIO2PC cable
-
-.SH
-SYNOPSIS
-.B atariserver
-[\fB\-h\fR]
-[\fB\-f\fR \fIdevice\fR]
-[\fB\-c\fR]
-[\fB\-C\fR]
-[\fB\-m\fR]
-[\fB\-o\fR \fIfile\fR]
-[\fB\-p\fR]
-[\fB\-s\fR]
-[\fB\-S\fR]
-[\fB\-X\fR]
-[\fB\-t\fR]
-[\fB\-<1-8>\fR]
-[\fB\-V\fR \fIdensity\fR \fIdir\fR]
-[\fB\-P\fR \fIconv\fR \fIpath\fR]
-[\fBfilename\fR]
-[\fI...\fR]
-
-.SH
-DESCRIPTION
-\fBatariserver\fR emulates Atari 8\-bit peripherals using the \fBSIO\fR
-protocol, including disk drives, printers, and cassette tape decks.
-
-This manual page only documents the command\-line options to
-\fBatariserver\fR. For more information, including a description of
-the user interface and the command set
-for remote command support, see the \fBREADME\fR
-file for AtariSIO, possibly located in /usr/doc/atarisio or
-/usr/share/doc/atarisio.
-
-.SH
-OPTIONS
-Most options can be set from within \fBatariserver\fR's curses\-based
-user interface while the program is running.
-.TP
-\fB\-h\fR
-Displays command line help message
-.TP
-\fB-f\fR \fIdevice\fR
-Sets the AtariSIO device. This option is only needed if you
-configured the kernel driver to support more than one interface.
-.IP
-\fINote:\fR this must be the very first command line option, otherwise
-it will be ignored!
-.IP
-Without this option, \fBatariserver\fR will check if the environment
-variable \fBATARISERVER_DEVICE\fR is set. If not, the default device
-\fB/dev/atarisio0\fR will be used.
-
-.TP
-\fB\-c\fR
-Tells AtariSIO that your Atari is connected via an alternative
-SIO2PC cable. The standard SIO2PC cable uses the RI pin for
-command line input. Some Windows SIO emulators use a slightly
-modified SIO2PC cable, using DSR instead of RI. If you are not
-sure what kind of SIO2PC cable you have, just try starting
-atariserver with and without the \fB\-c\fR switch and test if your
-Atari can boot from atariserver.
-.IP
-\fINote:\fR there's no performance benefit using the DSR line instead
-of the RI line; both cables work identically with AtariSIO.
-
-.TP
-\fB\-C\fR
-Similar to \fB\-c\fR except that the CTS pin is used. This is
-quite useful for testing purposes: connect two PCs with a
-nullmodem\-cable, start \fBatariserver\fR with \fB\-C\fR on one machine
-and \fBatarixfer\fR with \fB\-p\fR on the other.
-
-.TP
-\fB\-m\fR
-Monochrome mode: disable colors, even if your terminal
-reports color support.
-
-.TP
-\fB\-o\fR \fIfile\fR
-Set trace file: all output displayed in the log window will
-also be saved to the specified file.
-
-.TP
-\fB\-p\fR
-Loads the next image with "write protect" enabled. This
-option is only valid for the next image; if you want to load
-multiple write protected images, you have to specify this
-options before each filename.
-
-.TP
-\fB\-s\fR
-Disables high speed (57600 bit/sec) SIO support. It sets
-the baudrate to fixed 19200 bit/sec and also disables several
-special commands like "get ultraspeed byte" or "flush disk"
-that are only supported by high-speed drives like the
-1050 speedy. Read the list of SIO commands at the end of the
-README for more details.
-
-.TP
-\fB\-S\fR
-High speed (57600 bit/sec) mode with pauses between bytes.
-This is needed for some high speed SIO routines which are too
-slow to handle sustained 57600 bit/sec transfers. The effective
-speed will be approx. 48000 bit/sec.
-
-.TP
-\fB\-X\fR
-Enable XF551 compatibility mode. In XF551 mode \fBatariserver\fR
-reacts to commands with the 7th bit set and automatically
-switches to 38400 bit/sec transfer mode. Additionally, the
-GetStatus command sets both bit 7 and 6 in case of an QD
-(double sided, double density, 1440 sectors) disk, just like
-the XF551.
-
-.TP
-\fB\-t\fR
-Increases the trace level. You may use this option up to
-three times if you want more output.
-
-.TP
-\fB\-1\fR \fIthrough\fR \fB\-8\fR
-Set the drive number for the next image file. The default is 1 for the
-first image, and is incremented for each subsequent image. See \fBNOTES\fR
-below for an example.
-
-.TP
-\fB\-V\fR \fIdensity\fR \fIdir\fR
-Create virtual device of given density, using files from directory \fIdir\fR.
-\fIdensity\fR is one of:
-.IP
-\fBs\fR (single density, 720 sectors),
-.IP
-\fBd\fR (double density, 720 sectors),
-.IP
-\fBe\fR (1050 "enhanced" density, 1040 sectors),
-.IP
-\fInumber\fR\fBs\fR (single density, \fInumber\fR sectors, e.g. \fB1440s\fR),
-.IP
-\fInumber\fR\fBd\fR (double density, \fInumber\fR sectors, e.g. \fB1440d\fR),
-.IP
-\fBS\fR (single density, the number of sectors needed to store all files is automatically calculated)
-.IP
-\fBD\fR (double density, like \fBS\fR)
-.TP
-\fB\-P\fR \fIconv\fR \fIpath\fR
-Install printer handler.
-.IP
-\fIconv\fR is EOL conversion: \fBr\fR=raw(no conversion), \fBl\fR=LF (UN*X), \fBc\fR=CR+LF (DOS/Windows)
-.IP
-\fIpath\fR is either a filename or \fI|print-command\fR, eg \fB|lpr\fR
-.IP
-\fINote:\fR Most shells require you to quote \fIpath\fR if it contains a pipe (|) character. To use the standard unix print service, use: \fB-P l "|lpr"\fR
-
-.TP
-\fIfilename\fR
-One or more image files, which should be either ATR or XFD format Atari
-8\-bit disk images. Image filenames may be interleaved with \fB\-[1\-8]\fR
-and/or \fB-p\fR options. Images may be in any Atari\-compatible DOS or
-boot disk format; \fBatariserver\fR simply serves them to the Atari,
-without interpreting the contents.
-
-.SH
-NOTES
-To load several images you could start atariserver with
-the following options (for example):
-
-.br
-atariserver dos.atr -3 -p data1.atr -V d filedir
-.br
-
-This will load dos.atr into D1:, data1.atr into D3: and create
-a virtual drive in double density (720 sectors) out of the
-directory filedir. Furthermore, D1: and D4: will be writable,
-whereas D3: will be write protected.
-
-If you set the environment variable ATRPATH, \fBatariserver\fR will look
-for image files in the specified (colon separated) directories
-if the image can't be found in the current working directory.
-ATRPATH works both on the command line and in the user interface.
-For example:
-
-export ATRPATH=/home/atari/dos:/data/xl/magazines
-
-or (for csh users):
-setenv ATRPATH /home/atari/dos:/data/xl/magazines
-
-.SH
-KERNEL SUPPORT
-
-\fBatariserver\fR requires the \fBatarisio\fR kernel module (driver) to
-be loaded. If you receive an "error opening /dev/atarisio0" message,
-try loading the module (as \fBroot\fR):
-
-.br
-/sbin/modprobe atarisio port=/dev/ttyS0
-.PP
-Replace ttyS0 with whichever serial port has the SIO2PC cable attached.
-If the module refuses to load, you may have to "modprobe 8250" first.
-
-.SH
-SUPPORTED HARDWARE
-
-\fBatariserver\fR works with most common one-chip RS232 (serial port)
-SIO2PC designs, including the AtariMax "smart" SIO2PC by Steven Tucker,
-and designs based on the 1489/14C89 and Max232/233 chips.
-.PP
-The USB SIO2PC (sometimes incorrectly called SIO2USB) from AtariMax is
-\fBNOT\fR supported, though support is planned for future versions
-of AtariSIO/atariserver.
-.PP
-The old two-chip SIO2PC interface (with a MAX232 and an LS368)
-is NOT supported, and probably never will be.
-.PP
-All Atari 8\-bit computers (400/800, XL, and XE series) are supported.
-
-.SH
-AUTHOR
-Matthias Reichl <\fBhias@horus.com\fR>
-.PP
-Man page by B. Watson <\fBurchlay@urchlay.com\fB>
-
-.SH
-SEE ALSO
-\&\fIatarixfer\fR\|(1), \&\fIdir2atr\fR\|(1), \&\fIadir\fR\|(1).
-.PP
-AtariSIO home page: \fBhttp://www.horus.com/~hias/atari/\fR
diff --git a/system/atarisio/man/atarixfer.1 b/system/atarisio/man/atarixfer.1
deleted file mode 100644
index 61e13bd4da..0000000000
--- a/system/atarisio/man/atarixfer.1
+++ /dev/null
@@ -1,52 +0,0 @@
-.TH ATARIXFER "1" "April 2007" "atarixfer (atarisio 0.30)" "HiassofT Atari 8-bit Tools"
-.SH NAME
-\fBatarixfer\fR \- read or write from an Atari disk drive, via 1050-2-PC or APE ProSystem cable
-
-.SH SYNOPSIS
-.B atarixfer
-[\fB\-f\fR \fIdevice\fR] [\fB\-p\fR] [\fB\-r\fR \fIimagefile\fR] [\fB\-w\fR \fIimagefile\fR] [\fB\-d\fR] [\fB\-\fR<\fIdrive\fR>]
-
-.SH DESCRIPTION
-\fBatarixfer\fR can either write a disk image file to a real Atari disk drive,
-or read a disk from an Atari drive and write its contents to an image file.
-A 1050-2-PC or APE ProSystem cable is required.
-.PP
-\fBatarixfer\fR only supports whole-disk transfers, to or from a
-disk image file. Reading/writing single files or individual sectors
-is not possible.
-
-.SH OPTIONS
-.TP
-\fB-f\fR \fIdevice\fR
-Use alternative AtariSIO device (default: \fI/dev/atarisio0\fR)
-.TP
-\fB-p\fR
-Use APE ProSystem cable (default: 1050-2-PC cable)
-.TP
-\fB-r\fR \fIimagefile\fR
-Read from Atari disk and create an image of its contents. The type of
-image to create is decided by looking at the filename, which should end
-in \fI.atr\fR, \fI.xfd\fR, or \fI.dcm\fR (case-insensitive). If the
-filename doesn't match any of these, ATR image format is assumed.
-.TP
-\fB-r\fR \fIimagefile\fR
-Write a disk image to the drive.
-.TP
-\fB-d\fR
-Enable debugging output.
-.TP
-[\fB\-\fR<\fIdrive\fR>]
-Use drive number (1..8). Default is \fB-1\fR. The drive number must
-match the drive number switches on the Atari drive.
-
-.SH
-AUTHOR
-Matthias Reichl <\fBhias@horus.com\fR>
-.PP
-Man page by B. Watson <\fBurchlay@urchlay.com\fB>
-
-.SH
-SEE ALSO
-\&\fIatariserver\fR\|(1), \&\fIdir2atr\fR\|(1), \&\fIadir\fR\|(1).
-.PP
-AtariSIO home page: \fBhttp://www.horus.com/~hias/atari/\fR
diff --git a/system/atarisio/man/casinfo.1 b/system/atarisio/man/casinfo.1
deleted file mode 100644
index 73ec5de856..0000000000
--- a/system/atarisio/man/casinfo.1
+++ /dev/null
@@ -1,24 +0,0 @@
-.TH CASINFO "1" "April 2009" "casinfo (atarisio 0.30)" "HiassofT Atari 8-bit Tools"
-.SH NAME
-casinfo \- Get information on an Atari 8\-bit cassette image file
-.SH SYNOPSIS
-casinfo file [file] ...
-.SH DESCRIPTION
-For each valid cassette image (CAS file) on the command line, casinfo
-will display the description (if any), the number of parts (aka load
-stages), the number of blocks, and the block header information for
-each block in the file.
-.PP
-casinfo takes no options.
-.PP
-For a complete specification of the CAS file format, see the documentation
-for \fBcas2wav\fR, \fBwav2cas\fR, and/or \fBcassio\fR, all available
-at a web browser near you...
-.SH AUTHOR
-Matthias Reichl <\fBhias@horus.com\fR>
-.PP
-Man page by B. Watson <\fBurchlay@urchlay.com\fB>
-.SH SEE ALSO
-\&\fIatariserver\fR\|(1), \&\fIdir2atr\fR\|(1), \&\fIadir\fR\|(1).
-.PP
-AtariSIO home page: \fBhttp://www.horus.com/~hias/atari/\fR
diff --git a/system/atarisio/man/dir2atr.1 b/system/atarisio/man/dir2atr.1
deleted file mode 100644
index b4e352cedc..0000000000
--- a/system/atarisio/man/dir2atr.1
+++ /dev/null
@@ -1,150 +0,0 @@
-.TH DIR2ATR "1" "April 2007" "dir2atr (atarisio 0.30)" "HiassofT Atari 8-bit Tools"
-.SH NAME
-dir2atr \- create an Atari disk image from a directory of files
-
-.SH SYNOPSIS
-.B dir2atr
-[\fB\-d\fR] [\fB\-m\fR] [\fB\-p\fR] [\fB\-b\fR \fIDOS\fR] [\fBsectors\fR] \fIimage\-filename\fR \fIdirectory\fR
-
-.SH DESCRIPTION
-\fBdir2atr\fR creates an Atari DOS 2.x or MyDOS compatible disk image,
-containing the files from \fIdirectory\fR (or a blank disk, if the
-supplied \fIdirectory\fR does not exist). Despite the name, dir2atr is
-capable of creating ATR, XFD, or DCM format images.
-
-.SH OPTIONS
-.TP
-\fB\-d\fR
-Create double\-density (256 bytes/sector) disk image. Without this option,
-the default is to create a single\-density (128 bytes/sector) image.
-.TP
-\fB\-m\fR
-Use MyDOS format (VTOC; see \fB\-b\fR for boot sector type). Without this
-option, \fBdir2atr\fR may still create a MyDOS format image: If the
-number of sectors is not supplied, or if using double density (\fB\-d\fR),
-or if the number of sectors supplied in single density mode is anything
-other than 720 or 1040, then MyDOS format will be used.
-.sp
-.RS
-Another way of saying this is that DOS 2.x format will only be used if the
-number of sectors is supplied, and if it is equal to either 720 (DOS 2.0
-format) or 1040 (DOS 2.5 enhanced density format).
-.sp
-SpartaDOS\-formatted images are \fBnot\fR supported.
-.RE
-.TP
-\fB\-p\fR
-Create \fBPICONAME.TXT\fR file in disk image, containing long filename
-information (will be used by MyPicoDOS when displaying filenames).
-.TP
-\fB\-b\fR \fIDOS\fR
-Create bootable disk for specified DOS. The directory must already
-contain the \fBDOS.SYS\fR or equivalent for the specified DOS, unless
-creating a MyPicoDOS image (in which case, \fBPICODOS.SYS\fR will be
-created and added to the image).
-.sp
-Supported DOS choices (case\-insensitive):
-.br
-Dos20, Dos25, MyDos453, TurboDos21, TurboDos21HS, MyPicoDos403, MyPicoDos403HS
-.TP
-\fBsectors\fR
-Number of sectors in the created image. Standard floppy\-sized images
-generally contain 720 sectors (single\- or double\-density, 90K or 180K
-capacity) or 1040 sectors (1050/DOS 2.5 enhanced density, 127K capacity).
-.sp
-Some Atari drives and DOSes support larger floppy disks (e.g. 1440
-double\-density sectors for a DS/DD XF551 disk, 360K capacity; or
-2880 DD sectors for a PC-style 720K floppy drive).
-.sp
-Hard disk images may contain up to 65535 double\-density sectors. This
-limitation is imposed by the ATR file format (16 megabytes is pretty
-big for an 8-bit Atari disk, though). Most Atari DOSes won't support
-physical disk partitions bigger than this, anyway. Theoretically,
-the XFD "format" could be of unlimited size (since it's just a raw
-dump of the sectors, with no structure), but \fBdir2atr\fR imposes
-the same size limit for XFD as for ATR.
-.sp
-Actually, the distinction between "hard disk" and "floppy disk" images
-doesn't really exist in the ATR file format: any image that fits on
-an actual floppy disk (one that's actually supported by an actual
-Atari DOS) is by definition a floppy image, and anything
-larger than that must be considered a hard disk image.
-.sp
-If \fBsectors\fR is omitted, \fBdir2atr\fR will create a MyDOS\-format
-image with as many sectors as needed to contain the all the files
-in \fIdirectory\fR, unless this is less than 720 sectors (in which
-case, a 720\-sector image is created, with some free sectors).
-.sp
-If \fBsectors\fR is given, it must be between 720 and 65535. No
-Atari\-compatible disk may contain fewer than 720 sectors. When
-creating a DCM (DiskComm) image, the only supported image sizes
-are 90K (720 single\-density sectors), 127K (1040 single\-density
-sectors, aka 1050 enhanced density), and 180K (720 double\-density
-sectors).
-.sp
-If you specify a number of sectors too small for the files in
-\fIdirectory\fR, you will get an error message, but the image will
-still be created. It will contain whatever files were copied before
-running out of space (which might be none, if the first file is too
-big to fit).
-.TP
-\fIimage\-filename\fR
-Disk image file to create. The image type is determined by the
-filename "extension", which should be \fI.atr\fR, \fI.xfd\fR, or \fI.dcm\fR.
-The extension is treated case\-insensitively, and the default image type
-is ATR if the extension is missing or not recognized.
-.TP
-\fIdirectory\fR
-Directory of files to be copied to the image. The files are copied in
-case-sensitive alphabetical order. \fIdirectory\fR may contain
-subdirectories, which will be skipped if creating a DOS 2.x image, or
-included (recursively) as MyDOS subdirectories if creating a MyDOS image.
-While the image is being created, each filename in \fIdirectory\fR is
-printed to standard error output after it's copied.
-.sp
-\fBNOTE:\fR Empty subdirectories will \fBnot\fR be copied to the image.
-.sp
-Atari DOS and MyDOS (and any other compatible DOS for the Atari) suffer
-from a limit of 64 files per directory. For Atari DOS, this means 64
-files per disk, since subdirectories are not supported. For MyDOS,
-it means 64 files/subdirectories per directory. In either case,
-\fBdir2atr\fR will copy the first 64 files in the directory or
-subdirectory, then issue a warning to let you know that it had to
-skip the rest of the files.
-.sp
-To create a blank disk, you may create and use an empty directory. A
-blank disk is also created if the specified \fIdirectory\fR is not
-a directory (e.g. if it's a regular file), or if it does not exist
-at all! No error messages are given for non\-directories or non\-existent
-files. This is probably not the author's original intent, but it can
-be considered useful behaviour (except when it's confusing: if you make
-a typo in the \fIdirectory\fR, you'll end up with a blank image instead
-of the expected error message. The careful user will notice that no
-"Added file" messages get printed in this case).
-.sp
-Although Atari DOS and MyDOS only support uppercase "8.3" names,
-filenames within \fIdirectory\fR are not required to conform to this
-limitation. \fBdir2atr\fR will transform the filenames so that they
-match the Atari limitations, although care should be taken to avoid
-filenames within \fIdirectory\fR that differ only in case (e.g.
-\fBFOO\fR and \fBfoo\fR). If this happens, some of the resulting Atari
-filenames will contain spaces, which is incompatible with most
-(all?) Atari DOSes. Also, \fBdir2atr\fR will allow filenames inside
-the image to start with a digit, which is incompatible with most Atari
-DOSes as well.
-.sp
-If the \fB\-p\fR option is used, the filenames will still be transformed
-as necessary, but the original filenames will be recorded in the
-\fBPICONAME.TXT\fR file. If creating a MyPicoDOS image, the MyPicoDOS
-menu will actually display the full, original filenames.
-.SH
-AUTHOR
-Matthias Reichl <\fBhias@horus.com\fR>
-.PP
-Man page by B. Watson <\fBurchlay@urchlay.com\fB>
-
-.SH
-SEE ALSO
-\&\fIatariserver\fR\|(1), \&\fIatarixfer\fR\|(1), \&\fIadir\fR\|(1).
-.PP
-AtariSIO home page: \fBhttp://www.horus.com/~hias/atari/\fR
diff --git a/system/atarisio/slack-desc b/system/atarisio/slack-desc
deleted file mode 100644
index c7077bd711..0000000000
--- a/system/atarisio/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-        |-----handy-ruler------------------------------------------------------|
-atarisio: atarisio (disk emulator for use with Atari 8-bit computer and SIO2PC)
-atarisio:
-atarisio: AtariSIO allows a Linux system to act as one or more disk drives,
-atarisio: a printer, and/or a cassette drive for an Atari 8-bit (400/800/XL/XE)
-atarisio: computer, using an SIO2PC cable.
-atarisio:
-atarisio: Even without SIO2PC or a real Atari, this package includes some
-atarisio: utilities that are useful for manipulating and examining Atari disk,
-atarisio: tape, and executable images.
-atarisio:
-atarisio: