system/xf86-input-evtouch: Removed (build failure)

This doesn't build with latest Xorg, and it appears to be
unmaintained upstream.  The Xorg evdev driver will probably
work anyway - give that a try...

Signed-off-by: Robby Workman <rworkman@slackbuilds.org>

5 files changed, 0 insertions, 208 deletions

diff --git a/system/xf86-input-evtouch/README b/system/xf86-input-evtouch/README
deleted file mode 100644
index 40db38f10e..0000000000
--- a/system/xf86-input-evtouch/README
+++ /dev/null
@@ -1,11 +0,0 @@
-xf86-input-evtouch (X.org touchscreen driver) 
-
-This X.Org driver provides support for touchscreen input devices.
-The driver is actually a evdev driver which supports events for moving in
-absolute coordinates, relative coordinates and events for mouse buttons.
-
-The latest version by the original author doesn't build against
-xorg-server > 1.4, which was shipped with Slackware 12.2, so this SlackBuild
-uses patches that hopefully make it work with later Slackware releases.
-
-See README.SLACKWARE for configuration information.
diff --git a/system/xf86-input-evtouch/README.SLACKWARE b/system/xf86-input-evtouch/README.SLACKWARE
deleted file mode 100644
index fb4b23f008..0000000000
--- a/system/xf86-input-evtouch/README.SLACKWARE
+++ /dev/null
@@ -1,52 +0,0 @@
-README.SLACKWARE
-
-Slackware touchscreen mini-HOWTO. Written by V'yacheslav Stetskevych, 2010.
-This howto will help you set up your touchscreen using the evtouch driver.
-
-This driver bundles an udev rules file /lib/udev/rules.d/69-touchscreen.rules,
-that lists known supported touchscreens and creates a symlink to the correct
-event file for them. A lot of touchscreens are supported, but still more are
-capable. If you find that your touchscreen works with this driver, add it to
-the udev rules file and send your lshal output to ubuntu-mobile@lists.ubuntu.com
-to get it added to the driver.
-
-To make use of the driver, you will have to make edits to /etc/X11/xorg.conf
-(create a fresh one if it doesn't exist, or generate one with 'X -configure'):
-
-Section "InputDevice"
-  Identifier    "Touchscreen"
-  Driver        "evtouch"
-  Option        "Device"        "/dev/input/event#"
-  Option        "MinX"          "0"
-  Option        "MaxX"          "1000"
-  Option        "MinY"          "0"
-  Option        "MaxY"          "1000"
-  Option        "ReportingMode" "Raw"
-EndSection
-
-If you had an xorg.conf already, add the following to the ServerLayout section:
-  InputDevice "Touchscreen" "AlwaysCore"
-
-If your device is supported, a symlink /dev/input/evtouch_event will have been
-created for you by udev. Specify this symlink as the Option "Device" parameter.
-
-If your device is not supported by the udev rule, find out it's event number by
-looking at /proc/bus/input/devices. It should list your device with a line,
-that says "Handlers=event3 mouse2" or something similar.
-You may verify that your touchscreen is operable by issuing
-  cat /dev/input/event# (replace '#' with your number)
-and tapping your touchscreen. Random characters should appear on the screen.
-Note the event name, and use it as the Option "Device" parameter in xorg.conf.
-(Or better, add your device to the udev rule file to get a persistent symlink).
-
-Be sure to calibrate the device and record the correct parameters in your
-xorg.conf, see README.calibrate in /usr/doc/xf86-input-evtouch-$VERSION and
-find the necessary helpers in /usr/lib/xf86-input-evtouch. The calibration tool
-may not work for your touchscreen model, in that case try and set the right
-values in xorg.conf manually. That involves some guesswork, but works.
-
-See the driver's homepage for additional options you can put in xorg.conf,
-like Rotate, SwapX, SwapY and button action assignment.
-http://www.conan.de/touchscreen/evtouch.html
-
-Have fun!
diff --git a/system/xf86-input-evtouch/slack-desc b/system/xf86-input-evtouch/slack-desc
deleted file mode 100644
index adcb75ea3b..0000000000
--- a/system/xf86-input-evtouch/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                  |-----handy-ruler------------------------------------------------------|
-xf86-input-evtouch: xf86-input-evtouch (X.org touchscreen driver) 
-xf86-input-evtouch:
-xf86-input-evtouch: This X.Org driver provides support for touchscreen
-xf86-input-evtouch: input devices. The driver is actually a evdev driver which
-xf86-input-evtouch: supports events for moving in absolute coordinates, relative
-xf86-input-evtouch: coordinates and events for mouse buttons.
-xf86-input-evtouch:
-xf86-input-evtouch: Homepage: http://www.conan.de/touchscreen/evtouch.html
-xf86-input-evtouch:
-xf86-input-evtouch:
-xf86-input-evtouch:
diff --git a/system/xf86-input-evtouch/xf86-input-evtouch.SlackBuild b/system/xf86-input-evtouch/xf86-input-evtouch.SlackBuild
deleted file mode 100644
index c2bb00602e..0000000000
--- a/system/xf86-input-evtouch/xf86-input-evtouch.SlackBuild
+++ /dev/null
@@ -1,114 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for xf86-input-evtouch
-
-# Copyright 2010  V'yacheslav Stetskevych <slava18@gmail.com>
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PRGNAM=xf86-input-evtouch
-VERSION=${VERSION:-0.8.8}
-PATCHVER=${PATCHVER:-3build1.debian}
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) ARCH=i486 ;;
-    arm*) ARCH=arm ;;
-       *) ARCH=$( uname -m ) ;;
-  esac
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-set -e
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-$VERSION
-tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2
-cd $PRGNAM-$VERSION
-tar xvf $CWD/${PRGNAM}_${VERSION}-$PATCHVER.tar.gz
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-# Apply the patches on Slackware > 12.2
-while read -r file; do
-# Uncomment this line if building on Slackware 13.0
-	#[[ $file == *server-1.7* ]] && continue
-	patch -p1 < debian/patches/$file
-done < debian/patches/series
-
-CFLAGS="$SLKCFLAGS" \
-CXXFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --sysconfdir=/etc \
-  --localstatedir=/var \
-  --mandir=/usr/man \
-  --docdir=/usr/doc/$PRGNAM-$VERSION \
-  --build=$ARCH-slackware-linux \
-  --enable-evcalibrate
-
-make
-make install DESTDIR=$PKG
-
-# Install udev rules
-mkdir -p $PKG/lib/udev/rules.d
-cp 69-touchscreen.rules $PKG/lib/udev/rules.d/
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a \
-  AUTHORS COPYING ChangeLog INSTALL NEWS README README.calibration TODO  \
-  $PKG/usr/doc/$PRGNAM-$VERSION
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-cat $CWD/README.SLACKWARE > $PKG/usr/doc/$PRGNAM-$VERSION/README.SLACKWARE
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/system/xf86-input-evtouch/xf86-input-evtouch.info b/system/xf86-input-evtouch/xf86-input-evtouch.info
deleted file mode 100644
index 61ee3e4d9a..0000000000
--- a/system/xf86-input-evtouch/xf86-input-evtouch.info
+++ /dev/null
@@ -1,12 +0,0 @@
-PRGNAM="xf86-input-evtouch"
-VERSION="0.8.8"
-HOMEPAGE="http://www.conan.de/touchscreen/evtouch.html"
-DOWNLOAD="http://www.conan.de/touchscreen/xf86-input-evtouch-0.8.8.tar.bz2 \
-          https://launchpad.net/ubuntu/+archive/primary/+files/xf86-input-evtouch_0.8.8-3build1.debian.tar.gz"
-MD5SUM="4d8e092356d8353002f60a4907046c13 \
-	2480361cff2c92bf4332898d4fb3c819"
-DOWNLOAD_x86_64=""
-MD5SUM_x86_64=""
-REQUIRES=""
-MAINTAINER="V'yacheslav Stetskevych"
-EMAIL="slava18@gmail.com"