diff options
author | Robby Workman <rw@rlworkman.net> | 2010-05-11 22:55:26 +0200 |
---|---|---|
committer | David Somero <xgizzmo@slackbuilds.org> | 2010-05-11 22:55:26 +0200 |
commit | 692d3b71e71eb3ef0c044a6b56f82b795afa8d0d (patch) | |
tree | 2e776e2f82ecd77594e8d6886f829ae888518498 /system/pm-utils | |
parent | ac86efbc483a1c3dd2988a8ad865332baf1dc8d3 (diff) | |
download | slackbuilds-692d3b71e71eb3ef0c044a6b56f82b795afa8d0d.tar.gz |
system/pm-utils: Added to 12.1 repository
Diffstat (limited to 'system/pm-utils')
-rw-r--r-- | system/pm-utils/README | 9 | ||||
-rw-r--r-- | system/pm-utils/README.SLACKWARE | 114 | ||||
-rw-r--r-- | system/pm-utils/patches/99video.diff | 20 | ||||
-rw-r--r-- | system/pm-utils/patches/pm-utils-functions.in.patch | 25 | ||||
-rw-r--r-- | system/pm-utils/pm-utils.SlackBuild | 113 | ||||
-rw-r--r-- | system/pm-utils/pm-utils.info | 8 | ||||
-rw-r--r-- | system/pm-utils/slack-desc | 19 |
7 files changed, 308 insertions, 0 deletions
diff --git a/system/pm-utils/README b/system/pm-utils/README new file mode 100644 index 0000000000..7a11128b14 --- /dev/null +++ b/system/pm-utils/README @@ -0,0 +1,9 @@ +The pm-utils package provides simple shell command line tools +to suspend and hibernate computers that can be used to run +vendor or distro supplied scripts on suspend and resume. + +See the installed documentation, especially README.SLACKWARE, +for usage hints and such. + +vbetool and radeontool are not required, but you should probably +install them just in case your hardware needs them. diff --git a/system/pm-utils/README.SLACKWARE b/system/pm-utils/README.SLACKWARE new file mode 100644 index 0000000000..a69e6f5c86 --- /dev/null +++ b/system/pm-utils/README.SLACKWARE @@ -0,0 +1,114 @@ +README.SLACKWARE +20081130 - rworkman@slackware.com + +=============================================================================== +PLEASE READ THIS ENTIRE FILE BEFORE REPORTING PROBLEMS OR ASKING FOR HELP! +=============================================================================== + +One of these routines should tell you whether any of the operations +are supported by your current kernel/userspace at all: + + for i in hibernate suspend suspend-hybrid ; do + pm-is-supported --$i \ + && echo "$i is supported" \ + || echo "$i is not supported" ; + done + + *OR* + + cat /sys/power/state + +Assuming they are supported, running "pm-suspend" as root should do a suspend +to ram, and "pm-hibernate" should suspend to disk. Note that you must have a +swap partition (or file, but partition is easier) which is large enough +(2x ram is good here) and the relevant initrd lines and such for this to work. +If you're not familiar with all of that, don't test pm-hibernate. +I don't have hardware which supports suspend-hybrid, so I have no idea if/how +it works at all. + +Here's the short version of using suspend to disk: + +Stanza in /etc/lilo.conf should look something like this: + image = /boot/vmlinuz-generic-smp-2.6.26.7-smp + initrd = /boot/initrd.gz + append = "resume=/dev/hda2" + root = /dev/hda1 + label = Slackware + read-only + +/etc/mkinitrd.conf should look something like this: + MODULE_LIST="jfs" + ROOTDEV="/dev/hda1" + ROOTFS="jfs" + RESUMEDEV="/dev/hda2" + +mkinitrd command invocation would be this: + mkinitrd -c -k 2.6.26.7-smp -F + +All of the above assumes at least a cursory understanding of what those +commands and parameters do. If it's not clear, don't attempt it on a +system that you can't easily reinstall without concern. + +============================================================================== + +If it works for you, and/or you want to automate it a bit, you'll find +some sample acpi event declarations and scripts here: + http://rlworkman.net/conf/acpi/ +A better option is to use a power manager daemon, but unless you happen to be +running gnome or one of the pre-release xfce-4.6 builds, that's not an option. +I'm not sure whether kde's klaptop supports pm-utils or not, so feedback in +this area is encouraged. + +============================================================================== + +If it doesn't work by default for you, consider having a look at + http://people.freedesktop.org/~hughsient/quirk/quirk-suspend-index.html +for some debugging hints. Pay particular attention to this page: + http://people.freedesktop.org/~hughsient/quirk/quirk-suspend-try.html +If you are able to get your machine to suspend/resume correctly by passing +additional quirks on the command line, then I would like to know about it so +that upstream hal-info can get the correct information to use. Please email +the make/model and other relevant information about your machine along with +the full output of "lshal" and "lspci" attached, and what extra quirks you +needed to add for successful suspend/resume to rworkman@slackware.com + +============================================================================== + +If you need the system to do certain operations before going to sleep and +then undo them (or perhaps do something new) when waking back up, pm-utils +supports something called "hooks." The hooks installed by packages (not only +pm-utils itself) should be in /usr/lib/pm-utils/sleep.d/, while any hooks +installed by the local system administrator (e.g. things that are only an +issue on that one machine) should be in /etc/pm/sleep.d/. + +Looking at some of the existing hooks should give you a decent idea of their +capabilities; as a head start, the functions used in the hooks are declared +in /usr/lib/pm-utils/functions, which is inherited elsewhere by +/usr/lib/pm-utils/pm-functions + +One way to contribute to pm-utils indirectly is by writing and sending any +needed hooks scripts to upstream projects; as an example, the hook that +ships with wicd was contributed by me. Ideally, the pm-utils package should +have a very minimum number of hooks shipped with it, as they should ship with +the package to which the hook pertains; for example, the grub package would +ship its own hook. + +============================================================================== + +We have removed several hooks from the default upstream package in response +to a discussion on the pm-utils mailing list; see the source directory of +pm-utils for details, and if you happen to need any of the removed hooks, +most of them are in /usr/doc/pm-utils-*/extra_hooks/ + +============================================================================== + +KNOWN BUGS + +If your alsa drivers don't correctly save and restore state across a sleep / +resume cycle (due to a buggy driver), then you will need to add the drivers +to a custom file named /etc/pm/config.d/defaults (create the file if it does +not exist already) in a variable named "SUSPEND_MODULES" - see the file at +/usr/lib/pm-utils/defaults for proper format. + +============================================================================== + diff --git a/system/pm-utils/patches/99video.diff b/system/pm-utils/patches/99video.diff new file mode 100644 index 0000000000..f38b001117 --- /dev/null +++ b/system/pm-utils/patches/99video.diff @@ -0,0 +1,20 @@ +--- a/pm/sleep.d/99video ++++ b/pm/sleep.d/99video +@@ -144,7 +144,7 @@ suspend_video() + local acpi_flag=0 + quirk "${QUIRK_S3_BIOS}" && acpi_flag=$(($acpi_flag + 1)) + quirk "${QUIRK_S3_MODE}" && acpi_flag=$(($acpi_flag + 2)) +- [ 0 -ne $acpi_flag ] && sysctl -w kernel.acpi_video_flags=$acpi_flag ++ sysctl -w kernel.acpi_video_flags=$acpi_flag + + quirk "${QUIRK_NOFB}" && die_if_framebuffer + quirk "${QUIRK_VBESTATE_RESTORE}" && vbe_savestate +@@ -166,8 +166,6 @@ resume_video() + quirk "${QUIRK_RADEON_OFF}" && radeon_on + quirk "${QUIRK_DPMS_ON}" && vbe dpms on + quirk "${QUIRK_RESET_BRIGHTNESS}" && reset_brightness +- # always reset acpi_video_flag -- makes quirk testing more reliable. +- sysctl -w kernel.acpi_video_flags=0 + return 0 # avoid spurious hook exit failure message. + } + diff --git a/system/pm-utils/patches/pm-utils-functions.in.patch b/system/pm-utils/patches/pm-utils-functions.in.patch new file mode 100644 index 0000000000..834fe6599c --- /dev/null +++ b/system/pm-utils/patches/pm-utils-functions.in.patch @@ -0,0 +1,25 @@ +diff -Nur pm-utils-1.2.2.1.orig/pm/functions.in pm-utils-1.2.2.1/pm/functions.in +--- pm-utils-1.2.2.1.orig/pm/functions.in 2008-10-05 20:49:09.000000000 -0500 ++++ pm-utils-1.2.2.1/pm/functions.in 2008-10-24 14:49:56.911161730 -0500 +@@ -124,15 +124,19 @@ + done + } + +-# Service management is sysv dependent. +-# TODO: modularize this to make it work with other init systems. + if ! command_exists service; then + service() + { ++ # Pure SysV init + if [ -x "/etc/init.d/$1" ]; then + svc="$1" + shift + "/etc/init.d/$svc" "$@" ++ # Slackware's BSD-style SysV init ++ elif [ -x "/etc/rc.d/rc.${1}" ]; then ++ svc="$1" ++ shift ++ "/etc/rc.d/rc.${1}" "$@" + else + log "${1}: unrecognized service" + return 1 diff --git a/system/pm-utils/pm-utils.SlackBuild b/system/pm-utils/pm-utils.SlackBuild new file mode 100644 index 0000000000..c92c8c3567 --- /dev/null +++ b/system/pm-utils/pm-utils.SlackBuild @@ -0,0 +1,113 @@ +#!/bin/sh + +# Slackware build script for pm-utils + +# Copyright 2008 Robby Workman, Northport, Alabama, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PRGNAM=pm-utils +VERSION=1.2.2.1 +ARCH=${ARCH:-i486} +BUILD=${BUILD:-2} +TAG=${TAG:-_SBo} + +CWD=$(pwd) +TMP=${TMP:-/tmp/SBo} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" +fi + +set -e + +rm -rf $PKG +mkdir -p $TMP $PKG $OUTPUT +cd $TMP +rm -rf $PRGNAM-$VERSION +tar xvf $CWD/$PRGNAM-$VERSION.tar.gz +cd $PRGNAM-$VERSION +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Fix up some SysV init hardcoding +patch -p1 < $CWD/patches/pm-utils-functions.in.patch + +# Fix a bug where acpi video flags aren't properly reset after a resume, +# causing subsequent resumes to fail +patch -p1 < $CWD/patches/99video.diff + +CFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --sysconfdir=/etc \ + --docdir=/usr/doc/$PRGNAM-$VERSION \ + --mandir=/usr/man \ + --build=$ARCH-slackware-linux + +make +make install DESTDIR=$PKG + +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + +( cd $PKG/usr/man || exit 1 + find . -type f -exec gzip -9 {} \; + for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done +) + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a AUTHORS COPYING ChangeLog INSTALL NEWS README* TODO \ + $PKG/usr/doc/$PRGNAM-$VERSION +cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild +cat $CWD/README.SLACKWARE > $PKG/usr/doc/$PRGNAM-$VERSION/README.SLACKWARE + +# According to this thread, these hooks should not be needed: +# http://lists.freedesktop.org/archives/pm-utils/2008-November/001753.html +# ##### MOVED HOOKS +# 1. 50ntpd: ntp gracefully handles disappearing net on its own +# 2. 55battery: hal >0.5.10 handles this on its own +# 3. 90clock: Most systems should keep the hwclock in sync over a suspend / +# resume cycle, and since this hook is a severe time waster otherwise, +# we'll kill it. +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/extra_hooks +mv $PKG/usr/lib/pm-utils/sleep.d/{50ntpd,55battery,90clock} \ + $PKG/usr/doc/$PRGNAM-$VERSION/extra_hooks +# ##### REMOVED HOOKS +# 4. 65alsa: According to the alsa devs, this hook is useless. Correct +# way to workaround buggy alsa drivers is documented in README.SLACKWARE +# http://lists.freedesktop.org/archives/pm-utils/2008-November/001808.html +# 5. 94cpufreq: all cpufreq governors are "sane" now, so this isn't needed +rm -f $PKG/usr/lib/pm-utils/sleep.d/{65alsa,94cpufreq} + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz diff --git a/system/pm-utils/pm-utils.info b/system/pm-utils/pm-utils.info new file mode 100644 index 0000000000..e1160f734a --- /dev/null +++ b/system/pm-utils/pm-utils.info @@ -0,0 +1,8 @@ +PRGNAM="pm-utils" +VERSION="1.2.2.1" +HOMEPAGE="http://pm-utils.freedesktop.org/" +DOWNLOAD="http://pm-utils.freedesktop.org/releases/pm-utils-1.2.2.1.tar.gz" +MD5SUM="dcc7bde623d0bae207158e153b7394a8" +MAINTAINER="Robby Workman" +EMAIL="rw@rlworkman.net" +APPROVED="dsomero" diff --git a/system/pm-utils/slack-desc b/system/pm-utils/slack-desc new file mode 100644 index 0000000000..8aed9ddbd6 --- /dev/null +++ b/system/pm-utils/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler----------------------------------------------------| +pm-utils: pm-utils (Power Management Utilities) +pm-utils: +pm-utils: The pm-utils package provides simple shell command line tools +pm-utils: to suspend and hibernate computers that can be used to run +pm-utils: vendor or distro supplied scripts on suspend and resume. +pm-utils: +pm-utils: Homepage: http://pm-utils.freedesktop.org +pm-utils: +pm-utils: +pm-utils: +pm-utils: |