summaryrefslogtreecommitdiff
path: root/system/lirc
diff options
context:
space:
mode:
authorJohann Wilhelm <johann.wilhelm@9mal6.de>2010-05-12 17:45:29 +0200
committerRobby Workman <rworkman@slackbuilds.org>2010-05-12 17:45:29 +0200
commit85baeb20e1ccc3ceb113320d5740f21fea338b9c (patch)
treeb30d54cd1663452099ce2aedb35985a773ea0791 /system/lirc
parente57a26070192ebb157c5ce6d20aaa66f273af072 (diff)
downloadslackbuilds-85baeb20e1ccc3ceb113320d5740f21fea338b9c.tar.gz
system/lirc: Updated for version 0.8.4a
Diffstat (limited to 'system/lirc')
-rw-r--r--system/lirc/README40
-rw-r--r--system/lirc/README.SLACKWARE43
-rw-r--r--system/lirc/doinst.sh7
-rw-r--r--system/lirc/lirc-0.8.4a.diff31
-rw-r--r--system/lirc/lirc.SlackBuild73
-rw-r--r--system/lirc/lirc.info12
-rw-r--r--system/lirc/slack-desc4
7 files changed, 116 insertions, 94 deletions
diff --git a/system/lirc/README b/system/lirc/README
index 1bafc3649d..b064aa5530 100644
--- a/system/lirc/README
+++ b/system/lirc/README
@@ -2,41 +2,5 @@ LIRC is a package that allows you to decode and send infra-red signals of
many (but not all) commonly used remote controls. LIRC is released under
the GNU General Public License. It consists of lircd and lircmd daemons.
-Configuring lircd (the LIRC daemon)
-
- 1. Check if there is already a config file in /etc/lircd.conf. If not,
- 2. Check if there is a config file available for your remote control at
- the LIRC homepage and if so, copy it to /etc/lircd.conf. If not,
- 3. Start irrecord (close all applications that access /dev/lirc first)
- and follow the instructions given to you by this program. Copy the
- resulting file to /etc/lircd.conf. If you have trouble creating a
- working config file, please read the chapter about adding new remote
- controls -- http://www.lirc.org/html/help.html#new_remote
-
-Q: How can I use the infrared remote shipped with the tv card ?
-
-In the 2.6 kernels the remote simply is registered as keyboard input device
-within the linux input layer. When using the saa7134 driver it "just works",
-with bttv you'll have to load either ir-kbd-gpio or ir-kbd-i2c depending on
-your TV card. If in doubt just try both. Have a look at /proc/bus/input/devices
-file to see whenever the device is present or not.
-
-With the driver loaded the IR just works like a additional keyboard. The numbers
-are mapped to the keypad keys. Depending on the X-Servers keyboard configuration
-(try to pick a multimedia keyboard) other keys like the ones for volume control
-might work too.
-
-Q: But I want use lircd for IR input.
-
-No problem, you can do that too:
-
- 1. Get a recent lircd version with linux input layer support. The 0.6.6
- release is too old, a cvs snapshot or a 0.7 pre-release should do. You
- only need to build the lircd daemon + tools, no lirc kernel drivers
- needed. Take care that the dev/input driver is included when building
- lircd (either ./configure --with-driver=any to simply include all drivers
- or --with-driver=devinput).
- 2. Load the evdev module (which is part of the linux input layer). Check
- /proc/bus/input/devices to see which eventn device the IR input device has.
- 3. Start the daemon this way:
- /usr/sbin/lircd -H dev/input -d /dev/input/eventn.
+See README.SLACKWARE (also installed with the package documentation) for
+configuration hints.
diff --git a/system/lirc/README.SLACKWARE b/system/lirc/README.SLACKWARE
new file mode 100644
index 0000000000..41cbd33bbd
--- /dev/null
+++ b/system/lirc/README.SLACKWARE
@@ -0,0 +1,43 @@
+lirc README.SLACKWARE
+
+===============================================================================
+
+Configuring lircd (the LIRC daemon)
+
+ 1. Check if there is already a config file in /etc/lircd.conf. If not,
+ 2. Check if there is a config file available for your remote control at
+ the LIRC homepage and if so, copy it to /etc/lircd.conf. If not,
+ 3. Start irrecord (close all applications that access /dev/lirc first)
+ and follow the instructions given to you by this program. Copy the
+ resulting file to /etc/lircd.conf. If you have trouble creating a
+ working config file, please read the chapter about adding new remote
+ controls -- http://www.lirc.org/html/help.html#new_remote
+
+Q: How can I use the infrared remote shipped with the tv card ?
+
+In the 2.6 kernels the remote simply is registered as keyboard input device
+within the linux input layer. When using the saa7134 driver it "just works",
+with bttv you'll have to load either ir-kbd-gpio or ir-kbd-i2c depending on
+your TV card. If in doubt just try both. Have a look at /proc/bus/input/devices
+file to see whenever the device is present or not.
+
+With the driver loaded the IR just works like a additional keyboard. The numbers
+are mapped to the keypad keys. Depending on the X-Servers keyboard configuration
+(try to pick a multimedia keyboard) other keys like the ones for volume control
+might work too.
+
+Q: But I want use lircd for IR input.
+
+No problem, you can do that too:
+
+ 1. Get a recent lircd version with linux input layer support. The 0.6.6
+ release is too old, a cvs snapshot or a 0.7 pre-release should do. You
+ only need to build the lircd daemon + tools, no lirc kernel drivers
+ needed. Take care that the dev/input driver is included when building
+ lircd (either ./configure --with-driver=any to simply include all drivers
+ or --with-driver=devinput).
+ 2. Load the evdev module (which is part of the linux input layer). Check
+ /proc/bus/input/devices to see which eventn device the IR input device has.
+ 3. Start the daemon this way:
+ /usr/sbin/lircd -H dev/input -d /dev/input/eventn.
+
diff --git a/system/lirc/doinst.sh b/system/lirc/doinst.sh
index 843f41a053..07ee0983de 100644
--- a/system/lirc/doinst.sh
+++ b/system/lirc/doinst.sh
@@ -1,12 +1,11 @@
-#!/bin/sh
-
config() {
NEW="$1"
OLD="$(dirname $NEW)/$(basename $NEW .new)"
# If there's no config file by that name, mv it over:
if [ ! -r $OLD ]; then
mv $NEW $OLD
- elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy
+ elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+ # toss the redundant copy
rm $NEW
fi
# Otherwise, we leave the .new copy for the admin to consider...
@@ -16,3 +15,5 @@ config etc/lircd.conf.new
config etc/lircmd.conf.new
config etc/lircrc.new
+chroot . /sbin/depmod -ae @KERNEL@
+
diff --git a/system/lirc/lirc-0.8.4a.diff b/system/lirc/lirc-0.8.4a.diff
new file mode 100644
index 0000000000..9f25c81576
--- /dev/null
+++ b/system/lirc/lirc-0.8.4a.diff
@@ -0,0 +1,31 @@
+This avoids the building of lirc_gpio and lirc_parallel.
+
+Since SMP-Kernels are usual today, lirc_parallel would break the build.
+
+see lirc_parallel.c:
+#ifdef CONFIG_SMP
+#error "--- Sorry, this driver is not SMP safe. ---"
+#endif
+
+lirc_gpio uses 2 functions, not exported by the kernel shipped with Slackware 12.2.
+These were: bttv_get_cardinfo and bttv_get_gpio_queue
+
+diff -uprN lirc-0.8.4a_orig/configure lirc-0.8.4a/configure
+--- lirc-0.8.4a_orig/configure 2008-10-26 15:13:42.000000000 +0100
++++ lirc-0.8.4a/configure 2009-01-07 07:04:05.805431467 +0100
+@@ -25861,7 +25861,6 @@ elif test "$lirc_driver" = "all"; then
+ lirc_atiusb \
+ lirc_bt829 \
+ lirc_cmdir \
+- lirc_gpio \
+ lirc_i2c \
+ lirc_igorplugusb \
+ lirc_imon \
+@@ -25869,7 +25868,6 @@ elif test "$lirc_driver" = "all"; then
+ lirc_ite8709 \
+ lirc_mceusb \
+ lirc_mceusb2 \
+- lirc_parallel \
+ lirc_sasem \
+ lirc_serial \
+ lirc_sir \
diff --git a/system/lirc/lirc.SlackBuild b/system/lirc/lirc.SlackBuild
index b580b24cff..de644df718 100644
--- a/system/lirc/lirc.SlackBuild
+++ b/system/lirc/lirc.SlackBuild
@@ -2,7 +2,9 @@
# Slackware build script for lirc
+# Copyright 2009 Johann Wilhelm <johann.wilhelm@9mal6.de>
# Copyright 2007 David Somero <dsomero@hotmail.com>
+#
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
@@ -22,13 +24,10 @@
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-# Modified by Robby Workman of the SlackBuilds.org project
-# No additional license terms and no copyright claim :-)
-
PRGNAM=lirc
-VERSION=0.8.3
+VERSION=0.8.4a
ARCH=${ARCH:-i486}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-1}
TAG=${TAG:-_SBo}
CWD=$(pwd)
@@ -36,17 +35,15 @@ TMP=${TMP:-/tmp/SBo}
PKG=$TMP/package-$PRGNAM
OUTPUT=${OUTPUT:-/tmp}
-PKG_VERSION=${PKG_VERSION:-$VERSION} # Only changes if BLASTER=yes
-
# Any of these can be changed by passing the desired value on command line
# when executing the build script. For example:
-# BLASTER=yes ./lirc.SlackBuild
-# Note that IRQ and PORT are only important if BLASTER is "yes"
-BLASTER=${BLASTER:-no}
+# IRQ=5 ./lirc.SlackBuild
IRQ=${IRQ:-4}
PORT=${PORT:-0x3f8}
KERNEL=${KERNEL:-$(uname -r)}
+PKG_VERSION=${VERSION}_$(echo $KERNEL | tr '-' '_')
+
if [ "${ARCH}" = "i486" ]; then
SLKCFLAGS="-O2 -march=i486 -mtune=i686"
elif [ "${ARCH}" = "i686" ]; then
@@ -70,6 +67,10 @@ find . \
\( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-exec chmod 644 {} \;
+# Patch configure to not build a couple of things that either won't work
+# or will break compilation
+patch -p1 < $CWD/$PRGNAM-$VERSION.diff
+
CFLAGS="$SLKCFLAGS" \
CXXFLAGS="$SLKCFLAGS" \
./configure \
@@ -78,44 +79,26 @@ CXXFLAGS="$SLKCFLAGS" \
--exec-prefix=/usr \
--sysconfdir=/etc \
--localstatedir=/var \
+ --docdir=/usr/doc/$PRGNAM-$VERSION \
+ --disable-static \
--enable-sandboxed \
- --with-driver=userspace \
+ --with-driver=all \
+ --with-transmitter \
--with-x \
- --program-prefix="" \
- --program-suffix=""
+ --with-major=61 \
+ --with-port=$PORT \
+ --with-irq=$IRQ \
+ --with-moduledir=/lib/modules/$KERNEL/misc \
+ --build=$ARCH-slackware-linux
-make
+make
make install DESTDIR=$PKG
-if [ "$BLASTER" = "yes" ] ;then
- make distclean
-
- CFLAGS="$SLKCFLAGS" \
- CXXFLAGS="$SLKCFLAGS" \
- ./configure \
- --prefix=/usr \
- --mandir=/usr/man \
- --exec-prefix=/usr \
- --sysconfdir=/etc \
- --localstatedir=/var \
- --enable-sandboxed \
- --with-driver=serial \
- --with-transmitter \
- --with-x \
- --with-major=61 \
- --with-port=$PORT\
- --with-irq=$IRQ \
- --with-moduledir=/lib/modules/$KERNEL/misc
-
- make
- make install DESTDIR=$PKG
- PKG_VERSION=${VERSION}_$(echo $KERNEL | tr '-' '_')
-fi
-
mkdir -p $PKG/usr/doc/$PRGNAM-$PKG_VERSION
cp -a ANNOUNCE AUTHORS COPYING ChangeLog INSTALL NEWS README TODO \
doc/lirc.hwdb contrib/lircrc $PKG/usr/doc/$PRGNAM-$PKG_VERSION
install -m 0644 $CWD/$PRGNAM.SlackBuild $PKG/usr/doc/$PRGNAM-$PKG_VERSION
+install -m 0644 $CWD/README.SLACKWARE $PKG/usr/doc/$PRGNAM-$PKG_VERSION
( cd $PKG/usr/man
find . -type f -exec gzip -9 {} \;
@@ -128,15 +111,15 @@ install -m 0644 $CWD/$PRGNAM.SlackBuild $PKG/usr/doc/$PRGNAM-$PKG_VERSION
)
install -D -m 0644 contrib/lircd.conf $PKG/etc/lircd.conf.new
-install -D -m 0644 contrib/lircmd.conf $PKG/etc/lircmd.conf.new
-install -D -m 0644 contrib/lircrc $PKG/etc/lircrc.new
-install -D -m 0644 contrib/lirc.rules $PKG/etc/udev/rules.d/96-lirc.rules
+install -m 0644 contrib/lircmd.conf $PKG/etc/lircmd.conf.new
+install -m 0644 contrib/lircrc $PKG/etc/lircrc.new
+install -D -m 0644 contrib/lirc.rules $PKG/lib/udev/rules.d/96-lirc.rules
rm -rf $PKG/dev # We don't need this
mkdir -p $PKG/install
-install -m 0644 $CWD/doinst.sh $PKG/install/doinst.sh
-install -m 0644 $CWD/slack-desc $PKG/install/slack-desc
+cat $CWD/slack-desc > $PKG/install/slack-desc
+sed "s%@KERNEL@%$KERNEL%" $CWD/doinst.sh > $PKG/install/doinst.sh
cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$PKG_VERSION-$ARCH-$BUILD$TAG.tgz
+/sbin/makepkg -p -l y -c n $OUTPUT/$PRGNAM-$PKG_VERSION-$ARCH-$BUILD$TAG.tgz
diff --git a/system/lirc/lirc.info b/system/lirc/lirc.info
index 43b92cb349..3f7e2aa8c0 100644
--- a/system/lirc/lirc.info
+++ b/system/lirc/lirc.info
@@ -1,8 +1,8 @@
PRGNAM="lirc"
-VERSION="0.8.3"
+VERSION="0.8.4a"
HOMEPAGE="http://www.lirc.org/"
-DOWNLOAD="http://downloads.sourceforge.net/lirc/lirc-0.8.3.tar.bz2"
-MD5SUM="8e78eeded7b31e5ad02e328970437c0f"
-MAINTAINER="David Somero"
-EMAIL="dsomero@hotmail.com "
-APPROVED="Erik Hanson"
+DOWNLOAD="http://downloads.sourceforge.net/lirc/lirc-0.8.4a.tar.bz2"
+MD5SUM="606b714ed843d28060163ffc571fc1f7"
+MAINTAINER="Johann Wilhelm"
+EMAIL="johann.wilhelm@9mal6.de"
+APPROVED="rworkman"
diff --git a/system/lirc/slack-desc b/system/lirc/slack-desc
index 3136c60795..d4b0a95d11 100644
--- a/system/lirc/slack-desc
+++ b/system/lirc/slack-desc
@@ -14,6 +14,6 @@ lirc:
lirc: LIRC is released under GNU General Public License. It consists
lirc: of lircd and lircmd daemons.
lirc:
-lirc:
-lirc:
+lirc: This package contains all drivers provided by lirc except
+lirc: lirc_gpio and lirc_parallel.
lirc: