network/miniupnpd: Added (IGD Protocol, NAT-PMP, and PCP daemon).

Signed-off-by: David Spencer <idlemoor@slackbuilds.org>

7 files changed, 334 insertions, 0 deletions

diff --git a/network/miniupnpd/README b/network/miniupnpd/README
new file mode 100644
index 0000000000..c6b5298af2
--- /dev/null
+++ b/network/miniupnpd/README
@@ -0,0 +1,5 @@
+MiniUPnPd, a daemon providing Internet Gateway Device Protocol, NAT-PMP,
+and PCP services to your network from a linux box being the gateway.
+Following UPnP terminology, MiniUPnPd is a UPnP Device.
+
+Set IPV6="yes" when running the SlackBuild to enable support for IPv6.
diff --git a/network/miniupnpd/doinst.sh b/network/miniupnpd/doinst.sh
new file mode 100644
index 0000000000..9454c5d350
--- /dev/null
+++ b/network/miniupnpd/doinst.sh
@@ -0,0 +1,26 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+preserve_perms() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  if [ -e $OLD ]; then
+    cp -a $OLD ${NEW}.incoming
+    cat $NEW > ${NEW}.incoming
+    mv ${NEW}.incoming $NEW
+  fi
+  config $NEW
+}
+
+preserve_perms etc/rc.d/rc.miniupnpd.new
+config etc/miniupnpd/miniupnpd.conf.new
diff --git a/network/miniupnpd/miniupnpd.SlackBuild b/network/miniupnpd/miniupnpd.SlackBuild
new file mode 100644
index 0000000000..fc55d3f393
--- /dev/null
+++ b/network/miniupnpd/miniupnpd.SlackBuild
@@ -0,0 +1,122 @@
+#!/bin/sh
+
+# Slackware build script for miniupnpd
+
+# Copyright 2018 Andreas Guldstrand
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=miniupnpd
+VERSION=${VERSION:-2.0}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+IPV6=${IPV6:-no}
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+patch -p1 < "$CWD/slackware-version.patch"
+
+make -f Makefile.linux config.h
+
+make -f Makefile.linux \
+  CFLAGS="$SLKCFLAGS"
+
+make -f Makefile.linux install \
+  MANINSTALLDIR=/usr/man/man8 \
+  DESTDIR=$PKG
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+# Install init script
+mkdir -p $PKG/etc/rc.d
+sed -e "s/@IPV6@/$IPV6/" \
+  $CWD/rc.$PRGNAM.new > $PKG/etc/rc.d/rc.$PRGNAM.new
+chmod 755 $PKG/etc/rc.d/rc.$PRGNAM.new
+
+# Make sure we don't clobber an old configuration file
+mv $PKG/etc/miniupnpd/miniupnpd.conf $PKG/etc/miniupnpd/miniupnpd.conf.new
+
+# Add flush and display scripts
+sed -e 's%/sbin/%/usr/sbin/%' netfilter/iptables_flush.sh > $PKG/etc/miniupnpd/iptables_flush.sh
+sed -e 's%/sbin/%/usr/sbin/%' netfilter/ip6tables_flush.sh > $PKG/etc/miniupnpd/ip6tables_flush.sh
+sed -e 's%/sbin/%/usr/sbin/%' netfilter/iptables_display.sh > $PKG/etc/miniupnpd/iptables_display.sh
+sed -e 's%/sbin/%/usr/sbin/%' netfilter/ip6tables_display.sh > $PKG/etc/miniupnpd/ip6tables_display.sh
+chmod a+x \
+  $PKG/etc/miniupnpd/iptables_flush.sh \
+  $PKG/etc/miniupnpd/ip6tables_flush.sh \
+  $PKG/etc/miniupnpd/iptables_display.sh \
+  $PKG/etc/miniupnpd/ip6tables_display.sh
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a \
+  README INSTALL LICENSE Changelog.txt \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/network/miniupnpd/miniupnpd.info b/network/miniupnpd/miniupnpd.info
new file mode 100644
index 0000000000..22f793b1ad
--- /dev/null
+++ b/network/miniupnpd/miniupnpd.info
@@ -0,0 +1,10 @@
+PRGNAM="miniupnpd"
+VERSION="2.0"
+HOMEPAGE="http://miniupnp.free.fr/"
+DOWNLOAD="http://miniupnp.free.fr/files/miniupnpd-2.0.tar.gz"
+MD5SUM="1c07a215dd9b362e75a9efc05e2fb3b4"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="Andreas Guldstrand"
+EMAIL="andreas.guldstrand@gmail.com"
diff --git a/network/miniupnpd/rc.miniupnpd.new b/network/miniupnpd/rc.miniupnpd.new
new file mode 100644
index 0000000000..cb88938345
--- /dev/null
+++ b/network/miniupnpd/rc.miniupnpd.new
@@ -0,0 +1,92 @@
+#!/bin/bash
+
+PRG="MiniUPnPd"
+ARGS="-f /etc/miniupnpd/miniupnpd.conf"
+IPV6=@IPV6@
+
+cleanup() {
+  /etc/miniupnpd/iptables_removeall.sh &> /dev/null
+  [ "$IPV6" = "yes" ] && /etc/miniupnpd/ip6tables_removeall.sh &> /dev/null
+}
+
+start() {
+  echo -n "Starting $PRG..."
+  /etc/miniupnpd/iptables_init.sh &> /dev/null
+  [ "$IPV6" = "yes" ] && /etc/miniupnpd/ip6tables_init.sh &> /dev/null
+  if /usr/sbin/miniupnpd $ARGS; then
+    echo "Done."
+  else
+    EXIT=$?
+    cleanup
+    exit $EXIT
+  fi
+}
+
+stop() {
+  echo -n "Stopping $PRG..."
+  killall miniupnpd &> /dev/null
+  cleanup
+  echo "Done."
+}
+
+ensure_running() {
+  if pidof miniupnpd &> /dev/null; then
+    RUN=1
+  else
+    echo "$PRG is not running."
+    exit 1
+  fi
+}
+
+case "$1" in
+  "start")
+    if pidof miniupnpd &> /dev/null; then
+      echo "$PRG already running."
+      exit 0
+    fi
+    start
+    ;;
+  "stop")
+    ensure_running
+    stop
+    ;;
+  "restart")
+    if pidof miniupnpd &> /dev/null; then
+      stop
+    else
+      echo -n "$PRG is not running. Cleaning..."
+      cleanup
+      echo "Done."
+    fi
+    start
+    ;;
+  "flush")
+    ensure_running
+    echo -n "Flushing $PRG iptables rules..."
+    /etc/miniupnpd/iptables_flush.sh
+    [ "$IPV6" = "yes" ] && /etc/miniupnpd/ip6tables_flush.sh
+    echo "Done."
+    ;;
+  "display")
+    ensure_running
+    /etc/miniupnpd/iptables_display.sh
+    [ "$IPV6" = "yes" ] && /etc/miniupnpd/ip6tables_display.sh
+    ;;
+  "status")
+    ensure_running
+    echo "$PRG is running."
+    ;;
+  "cleanup")
+    if pidof miniupnpd &> /dev/null; then
+      echo "$PRG is running. Refusing to cleanup."
+      exit 1
+    fi
+    echo -n "Cleaning..."
+    cleanup
+    echo "Done."
+    ;;
+  *)
+    echo "Usage: $0 {start|stop|restart|flush|display|cleanup|status}"
+    exit 1
+    ;;
+esac
diff --git a/network/miniupnpd/slack-desc b/network/miniupnpd/slack-desc
new file mode 100644
index 0000000000..8ff2fd4658
--- /dev/null
+++ b/network/miniupnpd/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+         |-----handy-ruler------------------------------------------------------|
+miniupnpd: miniupnpd (Internet Gateway Device Protocol, NAT-PMP, and PCP daemon)
+miniupnpd:
+miniupnpd: MiniUPnPd, a daemon providing Internet Gateway Device Protocol,
+miniupnpd: NAT-PMP, and PCP services to your network from a linux box being the
+miniupnpd: gateway. Following UPnP terminology, MiniUPnPd is a UPnP Device.
+miniupnpd:
+miniupnpd:
+miniupnpd:
+miniupnpd:
+miniupnpd:
+miniupnpd:
diff --git a/network/miniupnpd/slackware-version.patch b/network/miniupnpd/slackware-version.patch
new file mode 100644
index 0000000000..79bd2bdec6
--- /dev/null
+++ b/network/miniupnpd/slackware-version.patch
@@ -0,0 +1,60 @@
+--- a/genconfig.sh	2018-05-05 10:09:05.942853150 +0200
++++ b/genconfig.sh	2018-05-05 10:26:38.668441749 +0200
+@@ -274,28 +274,35 @@
+ 			OS_VERSION=`grep ^base_version /etc/product | awk '{ print $3 }'`
+ 			OS_URL=https://www.clearos.com/
+ 		fi
+-		# use lsb_release (Linux Standard Base) when available
+-		LSB_RELEASE=`which lsb_release`
+-		if [ 0 -eq $? ]; then
+-			OS_NAME=`${LSB_RELEASE} -i -s`
+-			OS_VERSION=`${LSB_RELEASE} -r -s`
+-			case $OS_NAME in
+-				Debian)
+-					OS_URL=http://www.debian.org/
+-					OS_VERSION=`${LSB_RELEASE} -c -s`
+-					;;
+-				Ubuntu)
+-					OS_URL=http://www.ubuntu.com/
+-					OS_VERSION=`${LSB_RELEASE} -c -s`
+-					;;
+-				Gentoo)
+-					OS_URL=http://www.gentoo.org/
+-					;;
+-				arch)
+-					OS_URL=http://www.archlinux.org/
+-					OS_VERSION=`uname -r`
+-					;;
+-			esac
++		# Slackware specific
++		if [ -f /etc/os-release ]; then
++			OS_NAME=$(cat /etc/os-release | grep ^NAME= | cut -d= -f 2 | sed -e 's/^"//' -e 's/"$//')
++			OS_VERSION=$(cat /etc/os-release | grep ^VERSION= | cut -d= -f 2 | sed -e 's/^"//' -e 's/"$//')
++			OS_URL=$(cat /etc/os-release | grep ^HOME_URL= | cut -d= -f 2 | sed -e 's/^"//' -e 's/"$//')
++		else
++		# otherwise use lsb_release (Linux Standard Base) when available
++			LSB_RELEASE=`which lsb_release`
++			if [ 0 -eq $? ]; then
++				OS_NAME=`${LSB_RELEASE} -i -s`
++				OS_VERSION=`${LSB_RELEASE} -r -s`
++				case $OS_NAME in
++					Debian)
++						OS_URL=http://www.debian.org/
++						OS_VERSION=`${LSB_RELEASE} -c -s`
++						;;
++					Ubuntu)
++						OS_URL=http://www.ubuntu.com/
++						OS_VERSION=`${LSB_RELEASE} -c -s`
++						;;
++					Gentoo)
++						OS_URL=http://www.gentoo.org/
++						;;
++					arch)
++						OS_URL=http://www.archlinux.org/
++						OS_VERSION=`uname -r`
++						;;
++				esac
++			fi
+ 		fi
+ 		echo "#define USE_IFACEWATCHER 1" >> ${CONFIGFILE}
+ 		FW=netfilter