summaryrefslogtreecommitdiff
path: root/network
diff options
context:
space:
mode:
authorLukenShiro <lukenshiro@ngi.it>2014-07-31 23:31:14 +0700
committerWilly Sudiarto Raharjo <willysr@slackbuilds.org>2014-07-31 23:31:14 +0700
commit3f06205ba5e9b9b78c7fc1e66f9492a586cece1b (patch)
treecaf5ff436277d74664d8aab007648fb5838a8789 /network
parent7737fc439cff5831e6cd669268550cd828881484 (diff)
downloadslackbuilds-3f06205ba5e9b9b78c7fc1e66f9492a586cece1b.tar.gz
network/hostapd: Improve handling on config file.
Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>
Diffstat (limited to 'network')
-rw-r--r--network/hostapd/hostapd-defconfig.diff80
-rw-r--r--network/hostapd/hostapd.SlackBuild5
-rw-r--r--network/hostapd/hostapd.defconfig211
3 files changed, 194 insertions, 102 deletions
diff --git a/network/hostapd/hostapd-defconfig.diff b/network/hostapd/hostapd-defconfig.diff
deleted file mode 100644
index 23737f713a..0000000000
--- a/network/hostapd/hostapd-defconfig.diff
+++ /dev/null
@@ -1,80 +0,0 @@
---- defconfig 2014-06-04 15:26:14.000000000 +0200
-+++ defconfig.new 2014-06-19 18:52:42.399466282 +0200
-@@ -43,7 +43,7 @@
- #LIBS_c += -L/usr/local/lib
-
- # Driver interface for no driver (e.g., RADIUS server only)
--#CONFIG_DRIVER_NONE=y
-+CONFIG_DRIVER_NONE=y
-
- # IEEE 802.11F/IAPP
- CONFIG_IAPP=y
-@@ -79,20 +79,20 @@
- CONFIG_EAP_TTLS=y
-
- # EAP-SIM for the integrated EAP server
--#CONFIG_EAP_SIM=y
-+CONFIG_EAP_SIM=y
-
- # EAP-AKA for the integrated EAP server
--#CONFIG_EAP_AKA=y
-+CONFIG_EAP_AKA=y
-
- # EAP-AKA' for the integrated EAP server
- # This requires CONFIG_EAP_AKA to be enabled, too.
- #CONFIG_EAP_AKA_PRIME=y
-
- # EAP-PAX for the integrated EAP server
--#CONFIG_EAP_PAX=y
-+CONFIG_EAP_PAX=y
-
- # EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
--#CONFIG_EAP_PSK=y
-+CONFIG_EAP_PSK=y
-
- # EAP-pwd for the integrated EAP server (secure authentication with a password)
- #CONFIG_EAP_PWD=y
-@@ -112,9 +112,9 @@
- #CONFIG_EAP_FAST=y
-
- # Wi-Fi Protected Setup (WPS)
--#CONFIG_WPS=y
-+CONFIG_WPS=y
- # Enable UPnP support for external WPS Registrars
--#CONFIG_WPS_UPNP=y
-+CONFIG_WPS_UPNP=y
- # Enable WPS support with NFC config method
- #CONFIG_WPS_NFC=y
-
-@@ -133,27 +133,27 @@
-
- # RADIUS authentication server. This provides access to the integrated EAP
- # server from external hosts using RADIUS.
--#CONFIG_RADIUS_SERVER=y
-+CONFIG_RADIUS_SERVER=y
-
- # Build IPv6 support for RADIUS operations
- CONFIG_IPV6=y
-
- # IEEE Std 802.11r-2008 (Fast BSS Transition)
--#CONFIG_IEEE80211R=y
-+CONFIG_IEEE80211R=y
-
- # Use the hostapd's IEEE 802.11 authentication (ACL), but without
- # the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
- #CONFIG_DRIVER_RADIUS_ACL=y
-
- # IEEE 802.11n (High Throughput) support
--#CONFIG_IEEE80211N=y
-+CONFIG_IEEE80211N=y
-
- # Wireless Network Management (IEEE Std 802.11v-2011)
- # Note: This is experimental and not complete implementation.
- #CONFIG_WNM=y
-
- # IEEE 802.11ac (Very High Throughput) support
--#CONFIG_IEEE80211AC=y
-+CONFIG_IEEE80211AC=y
-
- # Remove debugging code that is printing out debug messages to stdout.
- # This can be used to reduce the size of the hostapd considerably if debugging
diff --git a/network/hostapd/hostapd.SlackBuild b/network/hostapd/hostapd.SlackBuild
index 3b57431f40..10e9745198 100644
--- a/network/hostapd/hostapd.SlackBuild
+++ b/network/hostapd/hostapd.SlackBuild
@@ -25,7 +25,7 @@
PRGNAM=hostapd
VERSION=${VERSION:-2.2}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
TAG=${TAG:-_SBo}
if [ -z "$ARCH" ]; then
@@ -72,8 +72,7 @@ find -L . \
\( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
-o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
-patch -p0 < $CWD/hostapd-defconfig.diff
-cat defconfig > .config
+cat $CWD/hostapd.defconfig > .config
CFLAGS+="$SLKCFLAGS" make
diff --git a/network/hostapd/hostapd.defconfig b/network/hostapd/hostapd.defconfig
index d5c73f2b1b..2faf7eff4b 100644
--- a/network/hostapd/hostapd.defconfig
+++ b/network/hostapd/hostapd.defconfig
@@ -13,28 +13,34 @@
CONFIG_DRIVER_HOSTAP=y
# Driver interface for wired authenticator
-CONFIG_DRIVER_WIRED=y
+#CONFIG_DRIVER_WIRED=y
# Driver interface for madwifi driver
#CONFIG_DRIVER_MADWIFI=y
#CFLAGS += -I../../madwifi # change to the madwifi source directory
-# Driver interface for Prism54 driver
-CONFIG_DRIVER_PRISM54=y
-
# Driver interface for drivers using the nl80211 kernel interface
CONFIG_DRIVER_NL80211=y
-# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
-# shipped with your distribution yet. If that is the case, you need to build
-# newer libnl version and point the hostapd build to use it.
-#LIBNL=/usr/src/libnl
-#CFLAGS += -I$(LIBNL)/include
-#LIBS += -L$(LIBNL)/lib
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+#CONFIG_LIBNL32=y
+
# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
#CONFIG_DRIVER_BSD=y
#CFLAGS += -I/usr/local/include
#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
# Driver interface for no driver (e.g., RADIUS server only)
CONFIG_DRIVER_NONE=y
@@ -49,9 +55,6 @@ CONFIG_RSN_PREAUTH=y
CONFIG_PEERKEY=y
# IEEE 802.11w (management frame protection)
-# This version is an experimental implementation based on IEEE 802.11w/D1.0
-# draft and is subject to change since the standard has not yet been finalized.
-# Driver support is also needed for IEEE 802.11w.
CONFIG_IEEE80211W=y
# Integrated EAP server
@@ -91,6 +94,9 @@ CONFIG_EAP_PAX=y
# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
CONFIG_EAP_PSK=y
+# EAP-pwd for the integrated EAP server (secure authentication with a password)
+#CONFIG_EAP_PWD=y
+
# EAP-SAKE for the integrated EAP server
#CONFIG_EAP_SAKE=y
@@ -100,22 +106,26 @@ CONFIG_EAP_PSK=y
#CONFIG_EAP_GPSK_SHA256=y
# EAP-FAST for the integrated EAP server
-# Note: Default OpenSSL package does not include support for all the
-# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
-# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
-# to add the needed functions.
+# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
+# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
+# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
#CONFIG_EAP_FAST=y
# Wi-Fi Protected Setup (WPS)
CONFIG_WPS=y
# Enable UPnP support for external WPS Registrars
CONFIG_WPS_UPNP=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
# EAP-IKEv2
-CONFIG_EAP_IKEV2=y
+#CONFIG_EAP_IKEV2=y
# Trusted Network Connect (EAP-TNC)
-CONFIG_EAP_TNC=y
+#CONFIG_EAP_TNC=y
+
+# EAP-EKE for the integrated EAP server
+#CONFIG_EAP_EKE=y
# PKCS#12 (PFX) support (used to read private key and certificate file from
# a file that usually has extension .p12 or .pfx)
@@ -138,7 +148,170 @@ CONFIG_IEEE80211R=y
# IEEE 802.11n (High Throughput) support
CONFIG_IEEE80211N=y
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+#CONFIG_WNM=y
+
+# IEEE 802.11ac (Very High Throughput) support
+CONFIG_IEEE80211AC=y
+
# Remove debugging code that is printing out debug messages to stdout.
# This can be used to reduce the size of the hostapd considerably if debugging
# code is not needed.
#CONFIG_NO_STDOUT_DEBUG=y
+
+# Add support for writing debug log to a file: -f /tmp/hostapd.log
+# Disabled by default.
+#CONFIG_DEBUG_FILE=y
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Remove support for RADIUS accounting
+#CONFIG_NO_ACCOUNTING=y
+
+# Remove support for RADIUS
+#CONFIG_NO_RADIUS=y
+
+# Remove support for VLANs
+#CONFIG_NO_VLAN=y
+
+# Enable support for fully dynamic VLANs. This enables hostapd to
+# automatically create bridge and VLAN interfaces if necessary.
+#CONFIG_FULL_DYNAMIC_VLAN=y
+
+# Use netlink-based kernel API for VLAN operations instead of ioctl()
+# Note: This requires libnl 3.1 or newer.
+#CONFIG_VLAN_NETLINK=y
+
+# Remove support for dumping internal state through control interface commands
+# This can be used to reduce binary size at the cost of disabling a debugging
+# option.
+#CONFIG_NO_DUMP_STATE=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, comment out these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, comment out these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# hostapd depends on strong random number generation being available from the
+# operating system. os_get_random() function is used to fetch random data when
+# needed, e.g., for key generation. On Linux and BSD systems, this works by
+# reading /dev/urandom. It should be noted that the OS entropy pool needs to be
+# properly initialized before hostapd is started. This is important especially
+# on embedded devices that do not have a hardware random number generator and
+# may by default start up with minimal entropy available for random number
+# generation.
+#
+# As a safety net, hostapd is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data
+# fetched from the OS. This by itself is not considered to be very strong, but
+# it may help in cases where the system pool is not initialized properly.
+# However, it is very strongly recommended that the system pool is initialized
+# with enough entropy either by using hardware assisted random number
+# generator or by storing state over device reboots.
+#
+# hostapd can be configured to maintain its own entropy store over restarts to
+# enhance random number generation. This is not perfect, but it is much more
+# secure than using the same sequence of random numbers after every reboot.
+# This can be enabled with -e<entropy file> command line option. The specified
+# file needs to be readable and writable by hostapd.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal hostapd random pool can be disabled.
+# This will save some in binary size and CPU use. However, this should only be
+# considered for builds that are known to be used on devices that meet the
+# requirements described above.
+#CONFIG_NO_RANDOM_POOL=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# none = Empty template
+#CONFIG_TLS=openssl
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used.
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms.
+#CONFIG_TLSV12=y
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks.
+#CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+#CONFIG_HS20=y
+
+# Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
+#CONFIG_SQLITE=y
+
+# Testing options
+# This can be used to enable some testing options (see also the example
+# configuration file) that are really useful only for testing clients that
+# connect to this hostapd. These options allow, for example, to drop a
+# certain percentage of probe requests or auth/(re)assoc frames.
+#
+#CONFIG_TESTING_OPTIONS=y
+
+# Automatic Channel Selection
+# This will allow hostapd to pick the channel automatically when channel is set
+# to "acs_survey" or "0". Eventually, other ACS algorithms can be added in
+# similar way.
+#
+# Automatic selection is currently only done through initialization, later on
+# we hope to do background checks to keep us moving to more ideal channels as
+# time goes by. ACS is currently only supported through the nl80211 driver and
+# your driver must have survey dump capability that is filled by the driver
+# during scanning.
+#
+# You can customize the ACS survey algorithm with the hostapd.conf variable
+# acs_num_scans.
+#
+# Supported ACS drivers:
+# * ath9k
+# * ath5k
+# * ath10k
+#
+# For more details refer to:
+# http://wireless.kernel.org/en/users/Documentation/acs
+#
+#CONFIG_ACS=y