network/lsh: Removed (unmaintained)

Reference: http://lists.slackbuilds.org/pipermail/slackbuilds-users/2010-October/006570.html

Signed-off-by: Heinz Wiesinger <pprkut@slackbuilds.org>
Signed-off-by: Robby Workman <rworkman@slackbuilds.org>

6 files changed, 0 insertions, 179 deletions

diff --git a/network/lsh/README b/network/lsh/README
deleted file mode 100644
index 679ffbf9f6..0000000000
--- a/network/lsh/README
+++ /dev/null
@@ -1,9 +0,0 @@
-lsh implements the secsh2 protocol
-
-lsh provides secure connections through untrusted networks.
-lsh is based on the specification for ssh2 and should (eventually)
-be compatible.  lsh supports the Stanford SRP autentication protocol.
-
-This requires liboop.
-
-See README.SLACKWARE for additional information.
diff --git a/network/lsh/README.SLACKWARE b/network/lsh/README.SLACKWARE
deleted file mode 100644
index eec0798330..0000000000
--- a/network/lsh/README.SLACKWARE
+++ /dev/null
@@ -1,11 +0,0 @@
-This script compiles-in libwrap (/etc/hosts.allow) support.
-
-For configuration instructions see: /usr/doc/lsh-<version>/README
-
-To start it at boot; add the following to /etc/rc.d/rc.local
-
-if [ -x /etc/rc.d/rc.lshd ]; then
-  /etc/rc.d/rc.lshd start
-fi
-
-To test try: lsh --sloppy-host-authentication localhost
diff --git a/network/lsh/doinst.sh b/network/lsh/doinst.sh
deleted file mode 100644
index 4e090de3b4..0000000000
--- a/network/lsh/doinst.sh
+++ /dev/null
@@ -1,26 +0,0 @@
-config() {
-  NEW="$1"
-  OLD="$(dirname $NEW)/$(basename $NEW .new)"
-  # If there's no config file by that name, mv it over:
-  if [ ! -r $OLD ]; then
-    mv $NEW $OLD
-  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
-    # toss the redundant copy
-    rm $NEW
-  fi
-  # Otherwise, we leave the .new copy for the admin to consider...
-}
-
-preserve_perms() {
-  NEW="$1"
-  OLD="$(dirname $NEW)/$(basename $NEW .new)"
-  if [ -e $OLD ]; then
-    cp -a $OLD ${NEW}.incoming
-    cat $NEW > ${NEW}.incoming
-    mv ${NEW}.incoming $NEW
-  fi
-  config $NEW
-}
-
-preserve_perms etc/rc.d/rc.lshd.new
-
diff --git a/network/lsh/lsh.SlackBuild b/network/lsh/lsh.SlackBuild
deleted file mode 100644
index 986ed6311f..0000000000
--- a/network/lsh/lsh.SlackBuild
+++ /dev/null
@@ -1,104 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for LSH
-
-# Written by Menno Duursma <druiloor@zonnet.nl>
-
-# This program is free software. It comes without any warranty.
-# Granted WTFPL, Version 2, as published by Sam Hocevar. See
-# http://sam.zoy.org/wtfpl/COPYING for more details.
-
-PRGNAM=lsh
-VERSION=${VERSION:-2.0.4}
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) ARCH=i486 ;;
-    arm*) ARCH=arm ;;
-       *) ARCH=$( uname -m ) ;;
-  esac
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-set -e # Exit on most errors
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-$VERSION
-tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
-cd $PRGNAM-$VERSION
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-CFLAGS="$SLKCFLAGS -lwrap -lnsl" \
-CXXFLAGS="$SLKCFLAGS" \
-./configure \
-  --disable-gss \
-  --disable-kerberos \
-  --disable-pam \
-  --with-tcpwrappers \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --sysconfdir=/etc \
-  --localstatedir=/var \
-  --mandir=/usr/man \
-  --infodir=/usr/info \
-  --docdir=/usr/doc/$PRGNAM-$VERSION \
-  --build=$ARCH-slackware-linux
-
-make
-make install-strip DESTDIR=$PKG
-
-# Add the the init script
-install -D -m755 contrib/lshd.rhlinux.init $PKG/etc/rc.d/rc.lshd.new
-
-find $PKG/usr/man -type f -exec gzip -9 {} \;
-for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
-
-rm -f $PKG/usr/info/dir
-gzip -9 $PKG/usr/info/*.info*
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a \
-  ANNOUNCE AUTHORS COPYING ChangeLog* FAQ INSTALL NEWS README distribution-key.gpg \
-  $PKG/usr/doc/$PRGNAM-$VERSION
-cd doc
-  cp -a \
-    HACKING NOTES PORTS TASKLIST TODO configuration.txt gateway-mode.txt srp-spec.txt \
-    $PKG/usr/doc/$PRGNAM-$VERSION
-cd ..
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/html
-cp doc/lsh.html $PKG/usr/doc/$PRGNAM-$VERSION/html
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-cat $CWD/doinst.sh > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/network/lsh/lsh.info b/network/lsh/lsh.info
deleted file mode 100644
index f19420d3ac..0000000000
--- a/network/lsh/lsh.info
+++ /dev/null
@@ -1,10 +0,0 @@
-PRGNAM="lsh"
-VERSION="2.0.4"
-HOMEPAGE="http://www.lysator.liu.se/~nisse/lsh/"
-DOWNLOAD="ftp://ftp.lysator.liu.se/pub/security/lsh/lsh-2.0.4.tar.gz"
-MD5SUM="621f4442332bb772b92d397d17ccaf02"
-DOWNLOAD_x86_64=""
-MD5SUM_x86_64=""
-MAINTAINER="Menno Duursma"
-EMAIL="druiloor@zonnet.nl"
-APPROVED="rworkman"
diff --git a/network/lsh/slack-desc b/network/lsh/slack-desc
deleted file mode 100644
index a7aedb7066..0000000000
--- a/network/lsh/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-   |-----handy-ruler-----------------------------------------------------|
-lsh: LSH (A GNU implementation of the Secure Shell protocols)
-lsh:
-lsh: lsh implements the secsh2 protocol with srp support
-lsh:
-lsh: lsh was written by Niels Möller
-lsh:
-lsh:
-lsh:
-lsh:
-lsh:
-lsh: