network/openconnect: Updated for version 3.20.

Signed-off-by: Robby Workman <rworkman@slackbuilds.org>

4 files changed, 786 insertions, 5 deletions

diff --git a/network/openconnect/doinst.sh b/network/openconnect/doinst.sh
new file mode 100644
index 0000000000..556ebdd56b
--- /dev/null
+++ b/network/openconnect/doinst.sh
@@ -0,0 +1,26 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+preserve_perms() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  if [ -e $OLD ]; then
+    cp -a $OLD ${NEW}.incoming
+    cat $NEW > ${NEW}.incoming
+    mv ${NEW}.incoming $NEW
+  fi
+  config $NEW
+}
+
+preserve_perms etc/vpnc/vpnc-script.new
+
diff --git a/network/openconnect/openconnect.SlackBuild b/network/openconnect/openconnect.SlackBuild
index 2f9b6ad13d..cf1a6d6409 100644
--- a/network/openconnect/openconnect.SlackBuild
+++ b/network/openconnect/openconnect.SlackBuild
@@ -2,7 +2,7 @@
 
 # Slackware build script for openconnect
 
-# Copyright 2010,2011  Robby Workman, Northport, Alabama, USA
+# Copyright 2010-2012  Robby Workman, Northport, Alabama, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PRGNAM=openconnect
-VERSION=${VERSION:-3.15}
+VERSION=${VERSION:-3.20}
 BUILD=${BUILD:-1}
 TAG=${TAG:-_SBo}
 
@@ -77,11 +77,16 @@ CFLAGS="$SLKCFLAGS" \
   --localstatedir=/var \
   --mandir=/usr/man \
   --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --with-vpnc-script=/etc/vpnc/vpnc-script \
   --build=$ARCH-slackware-linux
 
 make
 make install DESTDIR=$PKG
 
+mkdir -p $PKG/etc/vpnc
+cat $CWD/vpnc-script > $PKG/etc/vpnc/vpnc-script.new
+chmod 0755 $PKG/etc/vpnc/vpnc-script.new
+
 gzip -9 $PKG/usr/man/man?/*.?
 
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
@@ -93,6 +98,7 @@ cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
 
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
 
 cd $PKG
 /sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/network/openconnect/openconnect.info b/network/openconnect/openconnect.info
index a03fea3658..2f11d0bb4c 100644
--- a/network/openconnect/openconnect.info
+++ b/network/openconnect/openconnect.info
@@ -1,8 +1,8 @@
 PRGNAM="openconnect"
-VERSION="3.15"
+VERSION="3.20"
 HOMEPAGE="http://www.infradead.org/openconnect.html"
-DOWNLOAD="ftp://ftp.infradead.org/pub/openconnect/openconnect-3.15.tar.gz"
-MD5SUM="94245f4bac42a288100becab0b4ca29a"
+DOWNLOAD="ftp://ftp.infradead.org/pub/openconnect/openconnect-3.20.tar.gz"
+MD5SUM="3ba7c295e05b3053eec84ddc6705d89e"
 DOWNLOAD_x86_64=""
 MD5SUM_x86_64=""
 REQUIRES=""
diff --git a/network/openconnect/vpnc-script b/network/openconnect/vpnc-script
new file mode 100644
index 0000000000..11cdc3240f
--- /dev/null
+++ b/network/openconnect/vpnc-script
@@ -0,0 +1,749 @@
+#!/bin/sh
+#
+# Originally part of vpnc source code:
+# © 2005-2012 Maurice Massar, Jörg Mayer, Antonio Borneo et al.
+# © 2009-2012 David Woodhouse <dwmw2@infradead.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#
+################
+#
+# List of parameters passed through environment
+#* reason                       -- why this script was called, one of: pre-init connect disconnect
+#* VPNGATEWAY                   -- vpn gateway address (always present)
+#* TUNDEV                       -- tunnel device (always present)
+#* INTERNAL_IP4_ADDRESS         -- address (always present)
+#* INTERNAL_IP4_MTU             -- mtu (often unset)
+#* INTERNAL_IP4_NETMASK         -- netmask (often unset)
+#* INTERNAL_IP4_NETMASKLEN      -- netmask length (often unset)
+#* INTERNAL_IP4_NETADDR         -- address of network (only present if netmask is set)
+#* INTERNAL_IP4_DNS             -- list of dns servers
+#* INTERNAL_IP4_NBNS            -- list of wins servers
+#* INTERNAL_IP6_ADDRESS         -- IPv6 address
+#* INTERNAL_IP6_NETMASK         -- IPv6 netmask
+#* INTERNAL_IP6_DNS             -- IPv6 list of dns servers
+#* CISCO_DEF_DOMAIN             -- default domain name
+#* CISCO_BANNER                 -- banner from server
+#* CISCO_SPLIT_INC              -- number of networks in split-network-list
+#* CISCO_SPLIT_INC_%d_ADDR      -- network address
+#* CISCO_SPLIT_INC_%d_MASK      -- subnet mask (for example: 255.255.255.0)
+#* CISCO_SPLIT_INC_%d_MASKLEN   -- subnet masklen (for example: 24)
+#* CISCO_SPLIT_INC_%d_PROTOCOL  -- protocol (often just 0)
+#* CISCO_SPLIT_INC_%d_SPORT     -- source port (often just 0)
+#* CISCO_SPLIT_INC_%d_DPORT     -- destination port (often just 0)
+#* CISCO_IPV6_SPLIT_INC         -- number of networks in IPv6 split-network-list
+#* CISCO_IPV6_SPLIT_INC_%d_ADDR -- IPv6 network address
+#* CISCO_IPV6_SPLIT_INC_$%d_MASKLEN -- IPv6 subnet masklen
+
+# FIXMEs:
+
+# Section A: route handling
+
+# 1) The 3 values CISCO_SPLIT_INC_%d_PROTOCOL/SPORT/DPORT are currently being ignored
+#   In order to use them, we'll probably need os specific solutions
+#   * Linux: iptables -t mangle -I PREROUTING <conditions> -j ROUTE --oif $TUNDEV
+#       This would be an *alternative* to changing the routes (and thus 2) and 3)
+#       shouldn't be relevant at all)
+# 2) There are two different functions to set routes: generic routes and the
+#   default route. Why isn't the defaultroute handled via the generic route case?
+# 3) In the split tunnel case, all routes but the default route might get replaced
+#   without getting restored later. We should explicitely check and save them just
+#   like the defaultroute
+# 4) Replies to a dhcp-server should never be sent into the tunnel
+
+# Section B: Split DNS handling
+
+# 1) Maybe dnsmasq can do something like that
+# 2) Parse dns packets going out via tunnel and redirect them to original dns-server
+
+#env | sort
+#set -x
+
+# =========== script (variable) setup ====================================
+
+PATH=/sbin:/usr/sbin:$PATH
+
+OS="`uname -s`"
+
+HOOKS_DIR=/etc/vpnc
+DEFAULT_ROUTE_FILE=/var/run/vpnc/defaultroute
+RESOLV_CONF_BACKUP=/var/run/vpnc/resolv.conf-backup
+SCRIPTNAME=`basename $0`
+
+# some systems, eg. Darwin & FreeBSD, prune /var/run on boot
+if [ ! -d "/var/run/vpnc" ]; then
+	mkdir -p /var/run/vpnc
+	[ -x /sbin/restorecon ] && /sbin/restorecon /var/run/vpnc
+fi
+
+# stupid SunOS: no blubber in /usr/local/bin ... (on stdout)
+IPROUTE="`which ip | grep '^/'`" 2> /dev/null
+
+if ifconfig --help 2>&1 | grep BusyBox > /dev/null; then
+	ifconfig_syntax_inet=""
+else
+	ifconfig_syntax_inet="inet"
+fi
+
+if [ "$OS" = "Linux" ]; then
+	ifconfig_syntax_ptp="pointopoint"
+	route_syntax_gw="gw"
+	route_syntax_del="del"
+	route_syntax_netmask="netmask"
+else
+	ifconfig_syntax_ptp=""
+	route_syntax_gw=""
+	route_syntax_del="delete"
+	route_syntax_netmask="-netmask"
+fi
+if [ "$OS" = "SunOS" ]; then
+	route_syntax_interface="-interface"
+	ifconfig_syntax_ptpv6="$INTERNAL_IP6_ADDRESS"
+else
+	route_syntax_interface=""
+	ifconfig_syntax_ptpv6=""
+fi
+
+if [ -r /etc/openwrt_release ] && [ -n "$OPENWRT_INTERFACE" ]; then
+        . /etc/functions.sh
+	include /lib/network
+	MODIFYRESOLVCONF=modify_resolvconf_openwrt
+	RESTORERESOLVCONF=restore_resolvconf_openwrt
+elif [ -x /sbin/resolvconf ]; then # Optional tool on Debian, Ubuntu, Gentoo
+	MODIFYRESOLVCONF=modify_resolvconf_manager
+	RESTORERESOLVCONF=restore_resolvconf_manager
+elif [ -x /sbin/netconfig ]; then # tool on Suse after 11.1
+	MODIFYRESOLVCONF=modify_resolvconf_suse_netconfig
+	RESTORERESOLVCONF=restore_resolvconf_suse_netconfig
+elif [ -x /sbin/modify_resolvconf ]; then # Mandatory tool on Suse earlier than 11.1
+	MODIFYRESOLVCONF=modify_resolvconf_suse
+	RESTORERESOLVCONF=restore_resolvconf_suse
+else # Generic for any OS
+	MODIFYRESOLVCONF=modify_resolvconf_generic
+	RESTORERESOLVCONF=restore_resolvconf_generic
+fi
+
+
+# =========== script hooks =================================================
+
+run_hooks() {
+	HOOK="$1"
+
+	if [ -d ${HOOKS_DIR}/${HOOK}.d ]; then
+	    for script in ${HOOKS_DIR}/${HOOK}.d/* ; do
+		[ -f $script ] && . $script
+	    done
+	fi
+}
+
+# =========== tunnel interface handling ====================================
+
+do_ifconfig() {
+	if [ -n "$INTERNAL_IP4_MTU" ]; then
+		MTU=$INTERNAL_IP4_MTU
+	elif [ -n "$IPROUTE" ]; then
+		MTUDEV=`$IPROUTE route get "$VPNGATEWAY" | sed -ne 's/^.*dev \([a-z0-9]*\).*$/\1/p'`
+		MTU=`$IPROUTE link show "$MTUDEV" | sed -ne 's/^.*mtu \([[:digit:]]\+\).*$/\1/p'`
+		if [ -n "$MTU" ]; then
+			MTU=`expr $MTU - 88`
+		fi
+	fi
+
+	if [ -z "$MTU" ]; then
+		MTU=1412
+	fi
+
+	# Point to point interface require a netmask of 255.255.255.255 on some systems
+	if [ -n "$IPROUTE" ]; then
+		$IPROUTE link set dev "$TUNDEV" up mtu "$MTU"
+		$IPROUTE addr add "$INTERNAL_IP4_ADDRESS/32" peer "$INTERNAL_IP4_ADDRESS" dev "$TUNDEV"
+	else
+		ifconfig "$TUNDEV" ${ifconfig_syntax_inet} "$INTERNAL_IP4_ADDRESS" $ifconfig_syntax_ptp "$INTERNAL_IP4_ADDRESS" netmask 255.255.255.255 mtu ${MTU} up
+	fi
+
+	if [ -n "$INTERNAL_IP4_NETMASK" ]; then
+		set_network_route $INTERNAL_IP4_NETADDR $INTERNAL_IP4_NETMASK $INTERNAL_IP4_NETMASKLEN
+	fi
+
+	# If the netmask is provided, it contains the address _and_ netmask
+	if [ -n "$INTERNAL_IP6_ADDRESS" ] && [ -z "$INTERNAL_IP6_NETMASK" ]; then
+	    INTERNAL_IP6_NETMASK="$INTERNAL_IP6_ADDRESS/128"
+	fi
+	if [ -n "$INTERNAL_IP6_NETMASK" ]; then
+	    if [ -n "$IPROUTE" ]; then
+		$IPROUTE -6 addr add $INTERNAL_IP6_NETMASK dev $TUNDEV
+	    else
+		# Unlike for Legacy IP, we don't specify the dest_address
+		# here on *BSD. OpenBSD for one will refuse to accept
+		# incoming packets to that address if we do.
+		# OpenVPN does the same (gives dest_address for Legacy IP
+		# but not for IPv6).
+		# Only Solaris needs it; hence $ifconfig_syntax_ptpv6
+	        ifconfig "$TUNDEV" inet6 $INTERNAL_IP6_NETMASK $ifconfig_syntax_ptpv6 mtu $MTU up
+	    fi
+	fi
+}
+
+destroy_tun_device() {
+	case "$OS" in
+	NetBSD|FreeBSD) # and probably others...
+		ifconfig "$TUNDEV" destroy
+		;;
+	esac
+}
+
+# =========== route handling ====================================
+
+if [ -n "$IPROUTE" ]; then
+	fix_ip_get_output () {
+		sed -e 's/ /\n/g' | \
+		    sed -ne '1p;/via/{N;p};/dev/{N;p};/src/{N;p};/mtu/{N;p}'
+	}
+
+	set_vpngateway_route() {
+		$IPROUTE route add `$IPROUTE route get "$VPNGATEWAY" | fix_ip_get_output`
+		$IPROUTE route flush cache
+	}
+
+	del_vpngateway_route() {
+		$IPROUTE route $route_syntax_del "$VPNGATEWAY"
+		$IPROUTE route flush cache
+	}
+
+	set_default_route() {
+		$IPROUTE route | grep '^default' | fix_ip_get_output > "$DEFAULT_ROUTE_FILE"
+		$IPROUTE route replace default dev "$TUNDEV"
+		$IPROUTE route flush cache
+	}
+
+	set_network_route() {
+		NETWORK="$1"
+		NETMASK="$2"
+		NETMASKLEN="$3"
+		$IPROUTE route replace "$NETWORK/$NETMASKLEN" dev "$TUNDEV"
+		$IPROUTE route flush cache
+	}
+
+	reset_default_route() {
+		if [ -s "$DEFAULT_ROUTE_FILE" ]; then
+			$IPROUTE route replace `cat "$DEFAULT_ROUTE_FILE"`
+			$IPROUTE route flush cache
+			rm -f -- "$DEFAULT_ROUTE_FILE"
+		fi
+	}
+
+	del_network_route() {
+		NETWORK="$1"
+		NETMASK="$2"
+		NETMASKLEN="$3"
+		$IPROUTE route $route_syntax_del "$NETWORK/$NETMASKLEN" dev "$TUNDEV"
+		$IPROUTE route flush cache
+	}
+
+	set_ipv6_default_route() {
+		# We don't save/restore IPv6 default route; just add a higher-priority one.
+		$IPROUTE -6 route add default dev "$TUNDEV" metric 1
+		$IPROUTE -6 route flush cache
+	}
+
+	set_ipv6_network_route() {
+		NETWORK="$1"
+		NETMASKLEN="$2"
+		$IPROUTE -6 route replace "$NETWORK/$NETMASKLEN" dev "$TUNDEV"
+		$IPROUTE route flush cache
+	}
+
+	reset_ipv6_default_route() {
+		$IPROUTE -6 route del default dev "$TUNDEV"
+		$IPROUTE route flush cache
+	}
+
+	del_ipv6_network_route() {
+		NETWORK="$1"
+		NETMASKLEN="$2"
+		$IPROUTE -6 route del "$NETWORK/$NETMASKLEN" dev "$TUNDEV"
+		$IPROUTE -6 route flush cache
+	}
+else # use route command
+	get_default_gw() {
+		# isn't -n supposed to give --numeric output?
+		# apperently not...
+		# Get rid of lines containing IPv6 addresses (':')
+		netstat -r -n | awk '/:/ { next; } /^(default|0\.0\.0\.0)/ { print $2; }'
+	}
+
+	set_vpngateway_route() {
+		route add -host "$VPNGATEWAY" $route_syntax_gw "`get_default_gw`"
+	}
+
+	del_vpngateway_route() {
+		route $route_syntax_del -host "$VPNGATEWAY" $route_syntax_gw "`get_default_gw`"
+	}
+
+	set_default_route() {
+		DEFAULTGW="`get_default_gw`"
+		echo "$DEFAULTGW" > "$DEFAULT_ROUTE_FILE"
+		route $route_syntax_del default $route_syntax_gw "$DEFAULTGW"
+		route add default $route_syntax_gw "$INTERNAL_IP4_ADDRESS" $route_syntax_interface
+	}
+
+	set_network_route() {
+		NETWORK="$1"
+		NETMASK="$2"
+		NETMASKLEN="$3"
+		del_network_route "$NETWORK" "$NETMASK" "$NETMASKLEN"
+		route add -net "$NETWORK" $route_syntax_netmask "$NETMASK" $route_syntax_gw "$INTERNAL_IP4_ADDRESS" $route_syntax_interface
+	}
+
+	reset_default_route() {
+		if [ -s "$DEFAULT_ROUTE_FILE" ]; then
+			route $route_syntax_del default $route_syntax_gw "`get_default_gw`" $route_syntax_interface
+			route add default $route_syntax_gw `cat "$DEFAULT_ROUTE_FILE"`
+			rm -f -- "$DEFAULT_ROUTE_FILE"
+		fi
+	}
+
+	del_network_route() {
+		case "$OS" in
+		Linux|NetBSD|Darwin|SunOS) # and probably others...
+			# routes are deleted automatically on device shutdown
+			return
+			;;
+		esac
+		NETWORK="$1"
+		NETMASK="$2"
+		NETMASKLEN="$3"
+		route $route_syntax_del -net "$NETWORK" $route_syntax_netmask "$NETMASK" $route_syntax_gw "$INTERNAL_IP4_ADDRESS"
+	}
+
+	set_ipv6_default_route() {
+		route add -inet6 default "$INTERNAL_IP6_ADDRESS" $route_syntax_interface
+	}
+
+	set_ipv6_network_route() {
+		NETWORK="$1"
+		NETMASK="$2"
+		route add -inet6 -net "$NETWORK/$NETMASK" "$INTERNAL_IP6_ADDRESS" $route_syntax_interface
+		:
+	}
+
+	reset_ipv6_default_route() {
+		route $route_syntax_del -inet6 default "$INTERNAL_IP6_ADDRESS"
+		:
+	}
+
+	del_ipv6_network_route() {
+		NETWORK="$1"
+		NETMASK="$2"
+		route $route_syntax_del -inet6 "$NETWORK/$NETMASK" "$INTERNAL_IP6_ADDRESS"
+		:
+	}
+
+fi
+
+# =========== resolv.conf handling ====================================
+
+# =========== resolv.conf handling for any OS =========================
+
+modify_resolvconf_generic() {
+	grep '^#@VPNC_GENERATED@' /etc/resolv.conf > /dev/null 2>&1 || cp -- /etc/resolv.conf "$RESOLV_CONF_BACKUP"
+	NEW_RESOLVCONF="#@VPNC_GENERATED@ -- this file is generated by vpnc
+# and will be overwritten by vpnc
+# as long as the above mark is intact"
+
+	# Remember the original value of CISCO_DEF_DOMAIN we need it later
+	CISCO_DEF_DOMAIN_ORIG="$CISCO_DEF_DOMAIN"
+	# Don't step on INTERNAL_IP4_DNS value, use a temporary variable
+	INTERNAL_IP4_DNS_TEMP="$INTERNAL_IP4_DNS"
+	exec 6< "$RESOLV_CONF_BACKUP"
+	while read LINE <&6 ; do
+		case "$LINE" in
+			nameserver*)
+				if [ -n "$INTERNAL_IP4_DNS_TEMP" ]; then
+					read ONE_NAMESERVER INTERNAL_IP4_DNS_TEMP <<-EOF
+	$INTERNAL_IP4_DNS_TEMP
+EOF
+					LINE="nameserver $ONE_NAMESERVER"
+				else
+					LINE=""
+				fi
+				;;
+			search*)
+				if [ -n "$CISCO_DEF_DOMAIN" ]; then
+					LINE="$LINE $CISCO_DEF_DOMAIN"
+					CISCO_DEF_DOMAIN=""
+				fi
+				;;
+			domain*)
+				if [ -n "$CISCO_DEF_DOMAIN" ]; then
+					LINE="domain $CISCO_DEF_DOMAIN"
+					CISCO_DEF_DOMAIN=""
+				fi
+				;;
+		esac
+		NEW_RESOLVCONF="$NEW_RESOLVCONF
+$LINE"
+	done
+	exec 6<&-
+
+	for i in $INTERNAL_IP4_DNS_TEMP ; do
+		NEW_RESOLVCONF="$NEW_RESOLVCONF
+nameserver $i"
+	done
+	if [ -n "$CISCO_DEF_DOMAIN" ]; then
+		NEW_RESOLVCONF="$NEW_RESOLVCONF
+search $CISCO_DEF_DOMAIN"
+	fi
+	echo "$NEW_RESOLVCONF" > /etc/resolv.conf
+
+	if [ "$OS" = "Darwin" ]; then
+		case "`uname -r`" in
+			# Skip for pre-10.4 systems
+			4.*|5.*|6.*|7.*)
+				;;
+			# 10.4 and later require use of scutil for DNS to work properly
+			*)
+				OVERRIDE_PRIMARY=""
+				if [ -n "$CISCO_SPLIT_INC" ]; then
+					if [ $CISCO_SPLIT_INC -lt 1 ]; then
+						# Must override for correct default route
+						# Cannot use multiple DNS matching in this case
+						OVERRIDE_PRIMARY='d.add OverridePrimary # 1'
+					fi
+				fi
+				# Uncomment the following if/fi pair to use multiple
+				# DNS matching when available.  When multiple DNS matching
+				# is present, anything reading the /etc/resolv.conf file
+				# directly will probably not work as intended.
+				#if [ -z "$CISCO_DEF_DOMAIN_ORIG" ]; then
+					# Cannot use multiple DNS matching without a domain
+					OVERRIDE_PRIMARY='d.add OverridePrimary # 1'
+				#fi
+				scutil >/dev/null 2>&1 <<-EOF
+					open
+					d.init
+					d.add ServerAddresses * $INTERNAL_IP4_DNS
+					set State:/Network/Service/$TUNDEV/DNS
+					d.init
+					# next line overrides the default gateway and breaks split routing
+					# d.add Router $INTERNAL_IP4_ADDRESS
+					d.add Addresses * $INTERNAL_IP4_ADDRESS
+					d.add SubnetMasks * 255.255.255.255
+					d.add InterfaceName $TUNDEV
+					$OVERRIDE_PRIMARY
+					set State:/Network/Service/$TUNDEV/IPv4
+					close
+				EOF
+				if [ -n "$CISCO_DEF_DOMAIN_ORIG" ]; then
+					scutil >/dev/null 2>&1 <<-EOF
+						open
+						get State:/Network/Service/$TUNDEV/DNS
+						d.add DomainName $CISCO_DEF_DOMAIN_ORIG
+						d.add SearchDomains * $CISCO_DEF_DOMAIN_ORIG
+						d.add SupplementalMatchDomains * $CISCO_DEF_DOMAIN_ORIG
+						set State:/Network/Service/$TUNDEV/DNS
+						close
+					EOF
+				fi
+				;;
+		esac
+	fi
+}
+
+restore_resolvconf_generic() {
+	if [ ! -f "$RESOLV_CONF_BACKUP" ]; then
+		return
+	fi
+	grep '^#@VPNC_GENERATED@' /etc/resolv.conf > /dev/null 2>&1 && cat "$RESOLV_CONF_BACKUP" > /etc/resolv.conf
+	rm -f -- "$RESOLV_CONF_BACKUP"
+
+	if [ "$OS" = "Darwin" ]; then
+		case "`uname -r`" in
+			# Skip for pre-10.4 systems
+			4.*|5.*|6.*|7.*)
+				;;
+			# 10.4 and later require use of scutil for DNS to work properly
+			*)
+				scutil >/dev/null 2>&1 <<-EOF
+					open
+					remove State:/Network/Service/$TUNDEV/IPv4
+					remove State:/Network/Service/$TUNDEV/DNS
+					close
+				EOF
+				;;
+		esac
+	fi
+}
+# === resolv.conf handling via /sbin/netconfig (Suse 11.1) =====================
+
+# Suse provides a script that modifies resolv.conf. Use it because it will
+# restart/reload all other services that care about it (e.g. lwresd).  [unclear if this is still true, but probably --mlk]
+
+modify_resolvconf_suse_netconfig()
+{
+	/sbin/netconfig modify -s vpnc -i "$TUNDEV" <<-EOF
+		INTERFACE='$TUNDEV'
+		DNSSERVERS='$INTERNAL_IP4_DNS'
+		DNSDOMAIN='$CISCO_DEF_DOMAIN'
+		EOF
+}
+# Restore resolv.conf to old contents on Suse
+restore_resolvconf_suse_netconfig()
+{
+	/sbin/netconfig remove -s vpnc -i "$TUNDEV"
+}
+
+# === resolv.conf handling via /sbin/modify_resolvconf (Suse) =====================
+
+# Suse provides a script that modifies resolv.conf. Use it because it will
+# restart/reload all other services that care about it (e.g. lwresd).
+
+modify_resolvconf_suse()
+{
+	FULL_SCRIPTNAME=`readlink -f $0`
+	RESOLV_OPTS=''
+	test -n "$INTERNAL_IP4_DNS" && RESOLV_OPTS="-n \"$INTERNAL_IP4_DNS\""
+	test -n "$CISCO_DEF_DOMAIN" && RESOLV_OPTS="$RESOLV_OPTS -d $CISCO_DEF_DOMAIN"
+	test -n "$RESOLV_OPTS" && eval /sbin/modify_resolvconf modify -s vpnc -p $SCRIPTNAME -f $FULL_SCRIPTNAME -e $TUNDEV $RESOLV_OPTS -t \"This file was created by $SCRIPTNAME\"
+}
+
+# Restore resolv.conf to old contents on Suse
+restore_resolvconf_suse()
+{
+	FULL_SCRIPTNAME=`readlink -f $0`
+	/sbin/modify_resolvconf restore -s vpnc -p $SCRIPTNAME -f $FULL_SCRIPTNAME -e $TUNDEV
+}
+
+# === resolv.conf handling via UCI (OpenWRT) =========
+
+modify_resolvconf_openwrt() {
+	add_dns $OPENWRT_INTERFACE $INTERNAL_IP4_DNS
+}
+
+restore_resolvconf_openwrt() {
+	remove_dns $OPENWRT_INTERFACE
+}
+# === resolv.conf handling via /sbin/resolvconf (Debian, Ubuntu, Gentoo)) =========
+
+modify_resolvconf_manager() {
+	NEW_RESOLVCONF=""
+	for i in $INTERNAL_IP4_DNS; do
+		NEW_RESOLVCONF="$NEW_RESOLVCONF
+nameserver $i"
+	done
+	if [ -n "$CISCO_DEF_DOMAIN" ]; then
+		NEW_RESOLVCONF="$NEW_RESOLVCONF
+domain $CISCO_DEF_DOMAIN"
+	fi
+	echo "$NEW_RESOLVCONF" | /sbin/resolvconf -a $TUNDEV
+}
+
+restore_resolvconf_manager() {
+	/sbin/resolvconf -d $TUNDEV
+}
+
+# ========= Toplevel state handling  =======================================
+
+kernel_is_2_6_or_above() {
+	case `uname -r` in
+		1.*|2.[012345]*)
+			return 1
+			;;
+		*)
+			return 0
+			;;
+	esac
+}
+
+do_pre_init() {
+	if [ "$OS" = "Linux" ]; then
+		if (exec 6<> /dev/net/tun) > /dev/null 2>&1 ; then
+			:
+		else # can't open /dev/net/tun
+			test -e /proc/sys/kernel/modprobe && `cat /proc/sys/kernel/modprobe` tun 2>/dev/null
+			# fix for broken devfs in kernel 2.6.x
+			if [ "`readlink /dev/net/tun`" = misc/net/tun \
+				-a ! -e /dev/net/misc/net/tun -a -e /dev/misc/net/tun ] ; then
+				ln -sf /dev/misc/net/tun /dev/net/tun
+			fi
+			# make sure tun device exists
+			if [ ! -e /dev/net/tun ]; then
+				mkdir -p /dev/net
+				mknod -m 0640 /dev/net/tun c 10 200
+				[ -x /sbin/restorecon ] && /sbin/restorecon /dev/net/tun
+			fi
+			# workaround for a possible latency caused by udev, sleep max. 10s
+			if kernel_is_2_6_or_above ; then
+				for x in `seq 100` ; do
+					(exec 6<> /dev/net/tun) > /dev/null 2>&1 && break;
+					sleep 0.1
+				done
+			fi
+		fi
+	elif [ "$OS" = "FreeBSD" ]; then
+		if [ ! -e /dev/tun ]; then
+			kldload if_tun
+		fi
+	elif [ "$OS" = "GNU/kFreeBSD" ]; then
+		if [ ! -e /dev/tun ]; then
+			kldload if_tun
+		fi
+	elif [ "$OS" = "NetBSD" ]; then
+		:
+	elif [ "$OS" = "OpenBSD" ]; then
+		:
+	elif [ "$OS" = "SunOS" ]; then
+		:
+	elif [ "$OS" = "Darwin" ]; then
+		:
+	fi
+}
+
+do_connect() {
+	if [ -n "$CISCO_BANNER" ]; then
+		echo "Connect Banner:"
+		echo "$CISCO_BANNER" | while read LINE ; do echo "|" "$LINE" ; done
+		echo
+	fi
+
+	set_vpngateway_route
+	do_ifconfig
+	if [ -n "$CISCO_SPLIT_INC" ]; then
+		i=0
+		while [ $i -lt $CISCO_SPLIT_INC ] ; do
+			eval NETWORK="\${CISCO_SPLIT_INC_${i}_ADDR}"
+			eval NETMASK="\${CISCO_SPLIT_INC_${i}_MASK}"
+			eval NETMASKLEN="\${CISCO_SPLIT_INC_${i}_MASKLEN}"
+			if [ $NETWORK != "0.0.0.0" ]; then
+				set_network_route "$NETWORK" "$NETMASK" "$NETMASKLEN"
+			else
+				set_default_route
+			fi
+			i=`expr $i + 1`
+		done
+		for i in $INTERNAL_IP4_DNS ; do
+			echo "$i" | grep : >/dev/null || \
+				set_network_route "$i" "255.255.255.255" "32"
+		done
+	elif [ -n "$INTERNAL_IP4_ADDRESS" ]; then
+		set_default_route
+	fi
+	if [ -n "$CISCO_IPV6_SPLIT_INC" ]; then
+		i=0
+		while [ $i -lt $CISCO_IPV6_SPLIT_INC ] ; do
+			eval NETWORK="\${CISCO_IPV6_SPLIT_INC_${i}_ADDR}"
+			eval NETMASKLEN="\${CISCO_IPV6_SPLIT_INC_${i}_MASKLEN}"
+			if [ $NETMASKLEN -lt 128 ]; then
+				set_ipv6_network_route "$NETWORK" "$NETMASKLEN"
+			else
+				set_ipv6_default_route
+			fi
+			i=`expr $i + 1`
+		done
+		for i in $INTERNAL_IP4_DNS ; do
+			if echo "$i" | grep : >/dev/null; then
+				set_ipv6_network_route "$i" "128"
+			fi
+		done
+	elif [ -n "$INTERNAL_IP6_NETMASK" -o -n "$INTERNAL_IP6_ADDRESS" ]; then
+		set_ipv6_default_route
+	fi
+
+	if [ -n "$INTERNAL_IP4_DNS" ]; then
+		$MODIFYRESOLVCONF
+	fi
+}
+
+do_disconnect() {
+	if [ -n "$CISCO_SPLIT_INC" ]; then
+		i=0
+		while [ $i -lt $CISCO_SPLIT_INC ] ; do
+			eval NETWORK="\${CISCO_SPLIT_INC_${i}_ADDR}"
+			eval NETMASK="\${CISCO_SPLIT_INC_${i}_MASK}"
+			eval NETMASKLEN="\${CISCO_SPLIT_INC_${i}_MASKLEN}"
+			if [ $NETWORK != "0.0.0.0" ]; then
+				# FIXME: This doesn't restore previously overwritten
+				#        routes.
+				del_network_route "$NETWORK" "$NETMASK" "$NETMASKLEN"
+			else
+				reset_default_route
+			fi
+			i=`expr $i + 1`
+		done
+		for i in $INTERNAL_IP4_DNS ; do
+			del_network_route "$i" "255.255.255.255" "32"
+		done
+	else
+		reset_default_route
+	fi
+	if [ -n "$CISCO_IPV6_SPLIT_INC" ]; then
+		i=0
+		while [ $i -lt $CISCO_IPV6_SPLIT_INC ] ; do
+			eval NETWORK="\${CISCO_IPV6_SPLIT_INC_${i}_ADDR}"
+			eval NETMASKLEN="\${CISCO_IPV6_SPLIT_INC_${i}_MASKLEN}"
+			if [ $NETMASKLEN -eq 0 ]; then
+				reset_ipv6_default_route
+			else
+				del_ipv6_network_route "$NETWORK" "$NETMASKLEN"
+			fi
+			i=`expr $i + 1`
+		done
+		for i in $INTERNAL_IP6_DNS ; do
+			del_ipv6_network_route "$i" "128"
+		done
+	elif [ -n "$INTERNAL_IP6_NETMASK" -o -n "$INTERNAL_IP6_ADDRESS" ]; then
+		reset_ipv6_default_route
+	fi
+
+	del_vpngateway_route
+
+	if [ -n "$INTERNAL_IP4_DNS" ]; then
+		$RESTORERESOLVCONF
+	fi
+	destroy_tun_device
+}
+
+#### Main
+
+if [ -z "$reason" ]; then
+	echo "this script must be called from vpnc" 1>&2
+	exit 1
+fi
+
+case "$reason" in
+	pre-init)
+		run_hooks pre-init
+		do_pre_init
+		;;
+	connect)
+		run_hooks connect
+		do_connect
+		run_hooks post-connect
+		;;
+	disconnect)
+		run_hooks disconnect
+		do_disconnect
+		run_hooks post-disconnect
+		;;
+	reconnect)
+		run_hooks reconnect
+		;;
+	*)
+		echo "unknown reason '$reason'. Maybe vpnc-script is out of date" 1>&2
+		exit 1
+		;;
+esac
+
+exit 0