network/openvswitch: Updated for version 2.3.2.

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

5 files changed, 5 insertions, 254 deletions

diff --git a/network/openvswitch/openvswitch.SlackBuild b/network/openvswitch/openvswitch.SlackBuild
index 18229adba0..389bef4bf9 100644
--- a/network/openvswitch/openvswitch.SlackBuild
+++ b/network/openvswitch/openvswitch.SlackBuild
@@ -23,8 +23,8 @@
 # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PRGNAM=openvswitch
-VERSION=${VERSION:-2.3.1}
-BUILD=${BUILD:-2}
+VERSION=${VERSION:-2.3.2}
+BUILD=${BUILD:-1}
 TAG=${TAG:-_SBo}
 
 KERNEL=${KERNEL:-$(uname -r)}
diff --git a/network/openvswitch/openvswitch.info b/network/openvswitch/openvswitch.info
index b61073006d..3ccf422da6 100644
--- a/network/openvswitch/openvswitch.info
+++ b/network/openvswitch/openvswitch.info
@@ -1,8 +1,8 @@
 PRGNAM="openvswitch"
-VERSION="2.3.1"
+VERSION="2.3.2"
 HOMEPAGE="http://openvswitch.org"
-DOWNLOAD="http://openvswitch.org/releases/openvswitch-2.3.1.tar.gz"
-MD5SUM="c008c1de0a8b6363b37afa599105d6d6"
+DOWNLOAD="http://openvswitch.org/releases/openvswitch-2.3.2.tar.gz"
+MD5SUM="5a5739ed82f1accac1c2d8d7553dc88f"
 DOWNLOAD_x86_64=""
 MD5SUM_x86_64=""
 REQUIRES=""
diff --git a/network/openvswitch/xen/README b/network/openvswitch/xen/README
deleted file mode 100644
index 93889615e7..0000000000
--- a/network/openvswitch/xen/README
+++ /dev/null
@@ -1,39 +0,0 @@
-Here are some scripts that I've written for use with Xen at my site.
-In order to use these scripts with your Xen installation you'll need to copy
-both the network-openvswitch and vif-openvswitch files to your
-/etc/xen/scripts directory.  You can instruct Xen to use these scripts by
-editing your /etc/xen/xend-config.sxp file and specifying these scripts as
-the default network-script and vif-script.
-
-For example, here are the entries in my xend-config.sxp file:
-
-  (network-script 'network-openvswitch netdev=eth2 bridge=ovs0')
-
-  (vif-script 'vif-openvswitch bridge=ovs0')
-
-If your network interface card and attached network switch support VLAN
-tagged traffic, you can place virtual machines within a seperate VLAN by
-appending a '.' and the VLAN tag number you wish the domain to use.  For
-example, to have all domains default to VLAN 2 you can do the following:
-
-  (vif-script 'vif-openvswitch bridge=ovs0.2')
-
-You can also specify tagged traffic in the domain configuration file.
-
-If you are hosting a hardware virtualized domain understand that the
-/etc/xen/scripts/qemu-ifup script is run instead of the vif-script specified
-in the xend-config.sxp file.  You'll need to edit this file to add the port
-to the vswitch instead of using the brctl (unless of course you are using
-the appropriate kernel module to control the vswitch using brctl.)  Here is
-a snippet from my qemu-ifup to handle hardware virtualized ports:
-
-  if lsmod | grep -c openvswitch_mod 1> /dev/null && ! lsmod | grep -c brcompat_mod 1> /dev/null
-  then
-      ovs-vsctl -- --may-exist add-port $bridge $1
-  else
-      brctl addif $bridge $1 || true
-  fi
-
-This doesn't handle tagged traffic.  I'll leave that as an exercise for you.
-
-Enjoy.
diff --git a/network/openvswitch/xen/network-openvswitch b/network/openvswitch/xen/network-openvswitch
deleted file mode 100644
index 45cda0b195..0000000000
--- a/network/openvswitch/xen/network-openvswitch
+++ /dev/null
@@ -1,124 +0,0 @@
-#!/bin/bash
-#============================================================================
-# Default Xen network start/stop script.
-# Xend calls a network script when it starts.
-# The script name to use is defined in ${XEN_CONFIG_DIR}/xend-config.sxp
-# in the network-script field.
-#
-# This script creates a virtual switch (default ${netdev}) and adds a
-# device (defaults to eth0) to it.  The interface that this Open vSwitch
-# is created on should not have a working IP address and will be used as
-# a switch for Xen domU's.
-#
-# Usage:
-# network-openvswitch (start|stop|status) {VAR=VAL}*
-#
-# Vars:
-# bridge     The bridge to use (default xenvs0).
-# netdev     The interface to add to the bridge (default eth0).  This
-#            device should not be configured with an IP address.  If so
-#            this script will tear down the interface and bring it back up
-#            without an IP address.
-#
-# start:
-# Creates the bridge as bridge
-# Enslaves netdev to bridge
-#
-# stop:
-# Removes netdev from the bridge
-# Deletes bridge
-#
-# status:
-# Print addresses, interfaces
-#
-#============================================================================
-
-dir=$(dirname "$0")
-. "$dir/logging.sh"
-. "$dir/xen-script-common.sh"
-. "$dir/xen-network-common.sh"
-. "$dir/locking.sh"
-
-findCommand "$@"
-evalVariables "$@"
-
-netdev=${netdev:-eth0}
-bridge=${bridge:-ovs0}
-
-addr=`ip addr show dev ${netdev} | egrep '^ *inet' | sed -e 's/ *inet //' -e 's/ .*//'`
-if [ -n "$addr" ]; then
-    echo "Invalid device: ${netdev} is up and has a valid IP address!" >&2
-    exit 1
-fi
-
-show_status () {
-    local dev=$1
-    local bridge=$2
-    
-    echo '============================================================'
-    echo 'vSwitch interfaces'
-    ovs-vsctl list-ifaces ${bridge}
-    echo ' '
-    echo 'vSwitch ports'
-    ovs-vsctl list-ports ${bridge}
-    echo '============================================================'
-}
-
-op_start () {
-    if [ "${bridge}" = "null" ] ; then
-	return
-    fi
-
-    ifconfig "${netdev}" down
-    ifconfig "${netdev}" 0.0.0.0 up
-    ovs-vsctl -- --may-exist add-br ${bridge}
-    ifconfig "${bridge}" 0.0.0.0 up
-    ovs-vsctl -- --may-exist add-port ${bridge} ${netdev}
-
-    # Remove any stale ports from last time virtual switch was running.
-    # Open vSwitch has the habit of remembering port settings between
-    # runs.
-    for port in $(ovs-vsctl list-ports ${bridge})
-    do
-	if [ "${port}" != "${netdev}" ]
-	then
-	    ifconfig "${port}" down
-	    ovs-vsctl del-port ${port}
-	fi
-    done
-}
-
-op_stop () {
-    if [ "${bridge}" = "null" ]; then
-	return
-    fi
-
-    # Remove all ports from virtual switch.
-    for port in $(ovs-vsctl list-ports ${bridge})
-    do
-	ifconfig "${port}" down
-	ovs-vsctl del-port ${port}
-    done
-
-    ifconfig "${bridge}" down
-    ovs-vsctl -- --if-exists del-br ${bridge}
-}
-
-case "$command" in
-    start)
-	op_start
-	;;
-    
-    stop)
-	op_stop
-	;;
-
-    status)
-	show_status ${netdev} ${bridge}
-	;;
-
-    *)
-	echo "Unknown command: $command" >&2
-	echo 'Valid commands are: start, stop, status' >&2
-	exit 1
-esac
diff --git a/network/openvswitch/xen/vif-openvswitch b/network/openvswitch/xen/vif-openvswitch
deleted file mode 100644
index 4374d41d02..0000000000
--- a/network/openvswitch/xen/vif-openvswitch
+++ /dev/null
@@ -1,86 +0,0 @@
-#!/bin/bash
-#============================================================================
-# ${XEN_SCRIPT_DIR}/vif-openvswitch
-#
-# Script for configuring a vif using Open vSwitch.
-#
-# Usage:
-# vif-openvswitch (add|remove|online|offline)
-#
-# Environment vars:
-# vif         vif interface name (required).
-# XENBUS_PATH path to this device's details in the XenStore (required).
-#
-# Read from the store:
-# bridge  bridge to add the vif to (optional).  Defaults to searching for the
-#         bridge itself.
-#
-# up:
-# Enslaves the vif interface to the bridge.
-#
-# down:
-# Removes the vif interface from the bridge.
-#============================================================================
-
-dir=$(dirname "$0")
-. "$dir/vif-common.sh"
-
-bridge=${bridge:-}
-bridge=$(xenstore_read_default "$XENBUS_PATH/bridge" "$bridge")
-
-if [ -z "${bridge}" ]
-then
-    bridge=$(ovs-vsctl list-br | cut -d "
-" -f 1)
-
-    if [ -z "${bridge}" ]
-    then
-	fatal "Could not find bridge and none was specified"
-    fi
-fi
-
-tag=${tag:-}
-
-# Domain on VLAN tagged bridge?
-RET=0
-ovs-vsctl list-br | grep -c ${bridge} 1>/dev/null 2>&1 || RET=1
-if [ $RET -eq 1 ]
-then
-    if [[ $bridge =~ \.[[:digit:]]{1,4}$ ]]
-    then
-	tag=$(echo ${bridge} | cut -d "." -f 2)
-	bridge=$(echo ${bridge} | cut -d "." -f 1)
-    else
-	fatal "Could not find bridge device ${bridge}"
-    fi
-fi
-
-RET=0
-ovs-vsctl list-br | grep -c ${bridge} 1>/dev/null 2>&1 || RET=1
-if [ $RET -eq 1 ]
-then
-    fatal "Could not find bridge device ${bridge}"
-fi
-
-log debug "Successful vif-bridge $command for ${vif}, bridge ${bridge}."
-case "$command" in
-    online)
-	ifconfig "${vif}" 0.0.0.0 up
-	if [ -z $tag ]
-	then
-            ovs-vsctl -- --may-exist add-port ${bridge} ${vif}
-	else
-	    ovs-vsctl -- --may-exist add-port ${bridge} ${vif} tag=${tag}
-	fi
-        ;;
-
-    offline)
-	ovs-vsctl -- --if-exists del-port ${bridge} ${vif}
-	ifconfig "$vif" 0.0.0.0 down
-        ;;
-esac
-
-if [ "$command" == "online" ]
-then
-  success
-fi