network/hylafax: Added to 12.0 repository

5 files changed, 434 insertions, 0 deletions

diff --git a/network/hylafax/README b/network/hylafax/README
new file mode 100644
index 0000000000..54fa621fff
--- /dev/null
+++ b/network/hylafax/README
@@ -0,0 +1,39 @@
+HylaFAX is an enterprise-class system for sending and receiving
+facsimiles as well as for sending alpha-numeric pages.The software
+is designed around a client-server architecture. Fax modems may
+reside on a single machine on a network and clients can submit
+an outbound job from any other machine on the network.
+
+Client software is designed to be lightweight and easy to port. 
+
+
+If you need to start hylafax at boot
+edit /etc/rc.d/rc.local and add the lines:
+
+script:
+# Starting the HylaFAX hfaxd and faxq Daemons at Boot.
+  if [ -x /etc/rc.d/rc.hylafax ]; then
+    /etc/rc.d/rc.hylafax start
+  fi
+
+Edit /etc/inittab and add a line(s) similar to:
+
+m0:2345:respawn:/usr/sbin/faxgetty ttyS0
+
+where 'm0' is unique in inittab and 'ttyS0' matches the device
+name(s) used at the outset of the faxaddmodem script. 
+
+With root permissions, execute '/usr/sbin/faxsetup'.
+When finished, faxsetup will automatically run faxaddmodem
+for you. Generally, you can follow all of the defaults
+except those for FaxMaster, the local fax number(s), TSI,
+and any modem-specific information in faxaddmodem.
+
+It would be wise to run faxcron and faxqclean regularly
+from cron so that the queue directories do not clutter
+up and fill the storage device. Many installations run
+faxqclean every hour and faxcron every day. Insert
+something like this into your uucp or root crontab file:
+
+0 * * * * /usr/sbin/faxqclean
+0 0 * * * /usr/sbin/faxcron | mail -s "HylaFAX Usage Report" faxmaster
diff --git a/network/hylafax/config.local b/network/hylafax/config.local
new file mode 100644
index 0000000000..8b59755838
--- /dev/null
+++ b/network/hylafax/config.local
@@ -0,0 +1,259 @@
+# $Id: config.site,v 1.14 2007/06/21 19:21:45 aidan Exp $
+#
+# HylaFAX Facsimile Software
+#
+# Copyright (c) 1990-1996 Sam Leffler
+# Copyright (c) 1991-1996 Silicon Graphics, Inc.
+# HylaFAX is a trademark of Silicon Graphics, Inc.
+# 
+# Permission to use, copy, modify, distribute, and sell this software and 
+# its documentation for any purpose is hereby granted without fee, provided
+# that (i) the above copyright notices and this permission notice appear in
+# all copies of the software and related documentation, and (ii) the names of
+# Sam Leffler and Silicon Graphics may not be used in any advertising or
+# publicity relating to the software without the specific, prior written
+# permission of Sam Leffler and Silicon Graphics.
+# 
+# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, 
+# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY 
+# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
+# 
+# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
+# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
+# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF 
+# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 
+# OF THIS SOFTWARE.
+#
+
+#
+# This file holds site-specific configuration parameters.
+#
+# Nothing is defined in here by default, the definitions
+# commented out below serve as documentation for what you
+# can set in this file or a config.local file.
+#
+# Note that you do not need to set anything here unless you
+# want to override the auto-configuration behaviour and/or
+# interactive prompting done by the configure script.
+#
+
+#
+# Package controls.
+#
+#DSO="auto"			# configure DSO support (auto|IRIX|no)
+#GETTY="auto"			# type of getty support (auto|BSD|SysV)
+#PS="auto"			# PostScript support to use (auto|gs|dps|imp)
+#SGI2FAX="auto"			# configure SGI image support (auto|yes|no)
+#DPS="no"			# install SGI DPS-based RIP (yes|no)
+GS="yes"			# install Ghostscript RIP (yes|no)
+#IMP="no"			# install SGI Impressario 2.1 support (yes|no)
+#REGEX="yes"			# use distributed regular expression package
+#UTMP="utmpx"			# type of utmp+wtmp handling (auto|utmp|utmpx)
+#DBLIB="no"			# use distributed libdb distribution
+
+#
+# Directory parameters.
+#
+DIR_BIN="/usr/bin"		        # directory for client apps
+DIR_LIB="/usr/lib"		        # directory for libfaxserver, libfaxutil
+DIR_LIBDATA="/usr/lib/hylafax"		# directory for client data
+DIR_LIBEXEC="/usr/libexec/hylafax"	# directory for libraries&hidden apps
+DIR_MAN="/usr/man"		        # directory for manual pages
+DIR_SPOOL="/var/spool/hylafax"		# directory for spooling area
+DIR_SBIN="/usr/sbin"		        # directory for system apps
+#DIR_LOCKS="/usr/spool/locks"		# directory for UUCP lock files
+#FONTMAP="/usr/share/ghostscript/3.33"	# directorys containing Fontmap files
+#PATH_AFM="/usr/lib/DPS/AFM"		# directorys for AFM files
+
+#
+# Miscellaneous parameters.
+#
+#DEFVRES="196"				# default vertical res for outbound fax
+#FILLORDER="MS2LSB"			# bit order of cpu (MSB2LSB/LSB2MSB)
+FAXGID="uucp"				# group ID for fax user
+FAXUID="uucp"				# user ID for fax user
+PAGESIZE="North American Letter"	# default page size
+#SYSGID="sys"				# group ID for system installs
+#SYSUID="bin"				# user ID for system installs
+#LOCKS="ascii"				# default UUCP lockfile scheme
+#
+#PATH_GETTY="/etc/getty"		# pathname of suitable getty program
+#PATH_VGETTY="/bin/vgetty"		# pathname of voice getty program
+#PATH_EGETTY="/bin/egetty"		# pathname of external getty program
+#PATH_SENDMAIL="/usr/lib/sendmail"	# pathname of suitable sendmail program
+PATH_GSRIP="/usr/bin/gs"		# pathname of Ghostscript-based RIP
+#PATH_DPSRIP="/var/spool/hylafax/bin/ps2fax.exe" # pathname of DPS-based RIP
+#PATH_IMPRIP="/usr/lib/print/psrip"	# pathname of Impressario 2.1 RIP
+#MANSCHEME="sysv-source-cat-strip"	# manual page installation scheme
+SYSVINIT="auto"		                # install SysV-style init support (auto|yes|no)
+DIR_SYSVINIT="/etc/rc.d"                # location of SysV-style init script
+DIR_SYSVINITSTART="/etc/rc.d"	        # location of SysV-style start script
+DIR_SYSVINITSTOP="/etc/rc.d"	        # location of SysV-style stop script
+NAME_SYSVINITSTART="rc.hylafax"	        # name of SysV-style start script
+NAME_SYSVINITSTOP="rc.hylafax"	        # name of SysV-style stop script
+FAXQ_SERVER=yes		                # init script starts faxq
+HFAXD_SERVER=yes		        # init script starts hfaxd
+HFAXD_OLD_PROTOCOL=no		        # don't start old protocol
+HFAXD_SNPP_SERVER=no		        # don't start paging protocol
+
+# SVR4 packaging stuff
+#PKG_ARCH=				# ARCH variable in pkginfo file
+#PKG_EMAIL=someone@somehost.somedomain	# EMAIL variable in pkginfo file
+#PKG_VENDOR="Your Name Here"		# VENDOR variable in pkginfo file
+#
+
+#
+# Parameters used when building the software.
+#
+# Note that configure has several ENVOPTS built into it that are
+# set according to the target.  This is done to help naive folks.
+#
+# Beware of changing the INSTALL definition; you *must* have an
+# install script that emulates the Silicon Graphics install program!
+#
+#AR="/bin/ar"				# pathname of suitable ar program
+#AROPTS="rc"				# options to ar for creating archive
+#CC="gcc"				# name/pathname of C compiler
+#CXX="gcc"				# name/pathname of C++ compiler
+#CXXFILE="-x c++"			# options for proper C++ processing
+#ENVOPTS="-Aa"				# options for getting ANSI C
+#GCOPTS="-g"				# options to pass C compiler
+#GCXXOPTS="-g"				# options to pass C++ compiler
+#GENDIST="/sbin/gendist"		# pathname of SGI inst generator program
+#INSTALL='${SHELL} ${PORT}/install.sh'	# SGI install program/emulator
+#LIBMALLOC="auto"			# yes|no|auto configure -lmalloc use
+#LIBPORT='${PORT}/libport.a'		# library with emulation code
+#LIBSUN="auto"				# yes|no|auto configure -lsun use
+#LLDOPTS=""				# extra link line options
+#MACHDEPLIBS=""				# extra libraries for linking
+#OPTIMIZER="-O2 -march=i486 -mtune=i686" # optimizer flags
+#PORTFUNCS=""				# non-standard functions to emulate
+#PROTOTYPES="-prototypes"		# C compiler options for checking function prototypes
+#RANLIB=":"				# pathname of suitable ranlib program
+#SHDLIBC="-lc_s"			# shared C library, if not standard
+#SIGHANDLERTYPES='(void(*)(int,...))'	# types to check for signal handler
+#STRIP="/bin/strip"			# strip program used by install.sh
+GLDOPTS="-L/usr/lib"
+#
+# The source for the TIFF library is not required
+# to build this software, but the library is required
+# to link against.  If libtiff is installed in a
+# non-standard location then setup LIBTIFF accordingly.
+#
+LIBTIFF="-L/usr/lib -ltiff"	# linkage convention for libtiff
+TIFFINC="/usr/include"		# place to find tiffio.h
+TIFFBIN="/usr/bin"		# where TIFF tools live
+
+#
+# The source for the ZLIB library is not required
+# to build this software, but the library is required
+# to link against.  If ZLIB is installed in a 
+# non-standard location then setup LIBZ accordingly.
+#
+LIBZ="-L/usr/lib -lz"		# linkage convention for libz
+ZLIBINC="-I/usr/include"	# place to find zlib.h
+
+#
+# The source for the POSIX regular expression package
+# is not required to build this software, but the package
+# is required to link against.  If the copy of the software
+# that is included in this distribution is not to be used
+# then set REGEX=no and supply the following definitions.
+#
+LIBREGEX=" "			# linkage convention for regex package
+REGEXINC="/usr/include"		# place to find regex.h
+
+#
+# The LIBDB hashed database package is (currently) used
+# only by the MLA tools that are not publicly available
+# but which are built from within this source tree.  In
+# the future the fax software may use the libdb software
+# for the remote client capabilities database (so these
+# hooks are included now).
+#
+# The source for the LIBDB hashed database package
+# is not required to build this software, but the package
+# is required to link against.  If the copy of the software
+# that is included in this distribution is not to be used
+# then set DBLIB=no and supply the following definitions.
+#
+LIBDB=" "			# linkage convention for libdb package
+DBLIBINC="/usr/include"		# place to find db.h
+
+#
+# Parameters to control various workarounds for system bugs.
+#
+# These parameters are normally set in configure based on
+# the target system.  If they are set here, then they will
+# override anything done by configure.
+#
+#CONFIG_OPENFIFO="O_RDONLY"		# mode to open FIFOs in server proc's
+#CONFIG_FIFOBUG="yes"			# enable workaround for FIFO select bug
+#CONFIG_TIOCMBISBYREF="yes"		# pass arg by reference to ioctl
+#CONFIG_WINSZHACK="no"			# include extra files for TIOCWINSZ use
+#CONFIG_ABORTBUG="no"			# enable workaround for abort problems
+#CONFIG_NOREOPEN="yes"			# reopen tty device after toggling DTR
+#CONFIG_NOSTDINDUP="yes"		# do not redirect stdout to stdin in ondelay
+#CONFIG_BADEXECVPROTO="no"		# system has incorrect execv func decl
+#CONFIG_BADEXECVEPROTO="no"		# system has incorrect execve func decl
+#CONFIG_BADGETOPTPROTO="no"		# system has incorrect getopt func decl
+#CONFIG_SOCKARGLENTYPE="unsigned long"	# call-by-ref arg type for socket funcs
+#CONFIG_BADSELECTPROTO="no"		# system has way old select func decl
+#CONFIG_MAXGID="5999"			# maximum permissable GID
+#CONFIG_OSFCNH="auto"			# control inclusion of <osfcn.h>
+
+#
+# Dynamic Shared Object (DSO) support.
+#
+# Beware that adding new support for DSOs may require some
+# modifications to the */Makefile.dso files.
+#
+#DSOSUF="so"				# DSO filename suffix
+#DSODELAY="-delay_load"			# DSO option for delayed loading
+#DSOOPTS="-shared -rdata_shared"	# options for building DSOs
+
+#
+# Makefile construction parameters.
+#
+# These should not normally be set; configure will
+# deduce the appropriate syntax to use for includes.
+#
+#MAKECXXOVERRIDE="=.C"			# make override stuff for SunPRO C++
+#MAKEDEPINCLUDE="include"		# make include for dependency files
+#MAKEDSOINCLUDE="#"			# make include for DSO support
+#MAKEINCLUDE=".include"			# make include syntax
+#MAKELQUOTE="<"				# make include syntax
+#MAKERQUOTE=">"				# make include syntax
+#SETMAKE='MAKE	= ${MAKE}'		# define if make does not setup $MAKE
+#MKDEPCOPTS=""				# C compiler opts to supply w/ -M
+#MKDEPCXXOPTS=""			# C++ compiler opts to supply w/ -M
+
+#
+# General system stuff used by the distribution.
+#
+# Beware of setting these as configure selects several programs
+# based on whether or not they are capable of processing scripts
+# included in the distribution (e.g AWK and SCRIPT_SH, SED).
+#
+#AWK="/bin/awk"				# pathname of suitable awk program
+#CAT="/bin/cat"				# pathname of suitable cat program
+#CHGRP="/etc/chgrp"			# pathname of suitable chgrp program
+#CHMOD="/etc/chmod"			# pathname of suitable chmod program
+#CHOWN="/etc/chown"			# pathname of suitable chown program
+#CMP="/bin/cmp"				# pathname of suitable cmp program
+#COL="/bin/col"				# pathname of suitable col program
+#CP="/bin/cp"				# pathname of suitable cp program
+#ECHO="/bin/echo"			# pathname of suitable echo program
+#GREP="/bin/grep"			# pathname of suitable grep program
+#LN="/bin/ln"				# pathname of suitable ln program
+#LN_S="-s"				# option to ${LN} to create symlink
+#MAN="/usr/bin/man"			# pathname of suitable man program
+MKDIR="/bin/mkdir -p"			# pathname of suitable mkdir program
+#MKFIFO="/bin/mkfifo"			# pathname of suitable mkfifo program
+#MV="/bin/mv"				# pathname of suitable mv program
+#MV_F="-f"				# option to ${MV} to force operation
+#RMCMD="/bin/rm"			# pathname of suitable rm program
+#SED="/bin/sed"				# pathname of suitable sed program
+#SCRIPT_SH="/bin/sh"			# pathname of suitable shell
+#SORT="/bin/sort"			# pathname of suitable sort program
diff --git a/network/hylafax/hylafax.SlackBuild b/network/hylafax/hylafax.SlackBuild
new file mode 100644
index 0000000000..7c17482d2c
--- /dev/null
+++ b/network/hylafax/hylafax.SlackBuild
@@ -0,0 +1,109 @@
+#!/bin/sh
+
+# Slackware build script for hylafax
+
+# Copyright 2007  David Somero <dsomero@hotmail.com>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# 2007.08.07
+# Alan Hicks <alan@lizella.net>
+# General script clean-up and minor improvements
+#
+
+set -e
+
+PRGNAM=hylafax
+VERSION=4.4.0
+ARCH=${ARCH:-i486}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "${ARCH}" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+fi
+
+rm -rf ${PKG}
+mkdir -p ${TMP} ${PKG} ${OUTPUT}
+cd ${TMP} 
+rm -rf ${PRGNAM}-${VERSION}
+tar -xvf ${CWD}/${PRGNAM}-${VERSION}.tar.gz
+
+cd ${PRGNAM}-${VERSION}
+chown -R root:root .
+chmod -R a-s,u+w,go+r-w .
+
+# Copy our source for the correct configuration 
+cp $CWD/config.local ${TMP}/${PRGNAM}-${VERSION}/config.local
+
+CFLAGS="${SLKCFLAGS}" \
+CXXFLAGS="${SLKCFLAGS}" \
+./configure       \
+  --nointeractive \
+  --disable-pam    \
+  --with-optmizer=${CFLAGS}
+
+make
+mkdir -p ${PKG}/etc/rc.d
+make install ROOT=${PKG}
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a INSTALL COPYRIGHT CONTRIBUTORS README TODO VERSION doc/* $PKG/usr/doc/$PRGNAM-$VERSION
+chmod -R a-w $PKG/usr/doc/$PRGNAM-$VERSION/*
+
+# We need to move the etc/rc.d/hylafax to the rc.hylafax file and make it executable.
+mv ${PKG}/etc/rc.d/hylafax ${PKG}/etc/rc.d/rc.hylafax
+chmod 755 ${PKG}/etc/rc.d/rc.hylafax
+
+( cd ${PKG}
+   find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+   find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress man pages
+( cd ${PKG}/usr/man
+   find . -type f -exec gzip -9 {} \;
+   for i in $(find . -type l) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+)
+
+cat ${CWD}/${PRGNAM}.SlackBuild > ${PKG}/usr/doc/${PRGNAM}-${VERSION}/${PRGNAM}.SlackBuild
+cat ${CWD}/slack-desc > ${PKG}/usr/doc/${PRGNAM}-${VERSION}/slack-desc
+
+mkdir -p ${PKG}/install
+cat ${CWD}/slack-desc > ${PKG}/install/slack-desc
+
+# add a configuration notice
+cat << EOF >> ${PKG}/install/doinst.sh
+# We warn about needed configuration to the /etc/inittab file.
+echo "The following line will need be added to your /etc/inittab,"
+echo "please check if its the correct tty device for the modem, "
+echo "and in case change it to the correct one."
+echo " "
+echo "m0:23:respawn:/usr/libexec/hylafax/faxgetty ttyS0"
+# Hylafax faxgetty activation
+EOF
+
+cd ${PKG}
+/sbin/makepkg -l y -c n ${OUTPUT}/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.tgz
diff --git a/network/hylafax/hylafax.info b/network/hylafax/hylafax.info
new file mode 100644
index 0000000000..0c411a6380
--- /dev/null
+++ b/network/hylafax/hylafax.info
@@ -0,0 +1,8 @@
+PRGNAM="hylafax"
+VERSION="4.4.0"
+HOMEPAGE="http://www.hylafax.org"
+DOWNLOAD="ftp://ftp.hylafax.org/source/hylafax-4.4.0.tar.gz"
+MD5SUM="fa086c6654a6ccefb127ac0476101c25"
+MAINTAINER="David Somero"
+EMAIL="dsomero@hotmail.com "
+APPROVED="Alan_Hicks"
diff --git a/network/hylafax/slack-desc b/network/hylafax/slack-desc
new file mode 100644
index 0000000000..1396618ae4
--- /dev/null
+++ b/network/hylafax/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+hylafax: hylafax (enterprise-class fax system)
+hylafax:
+hylafax: HylaFAX+
+hylafax: Making the Premier Open-Source Fax Management System Even Better
+hylafax: HylaFAX is an enterprise-class system for sending and receiving
+hylafax: facsimiles as well as for sending alpha-numeric pages.
+hylafax:
+hylafax: If you expect to send more than a few facsimiles a day, 
+hylafax: then HylaFAX is the fax package for you!
+hylafax:
+hylafax: