network/hylafax: Updated for version 6.0.2

1 files changed, 255 insertions, 0 deletions

diff --git a/network/hylafax/config.local.in b/network/hylafax/config.local.in
new file mode 100644
index 0000000000..20412e22fe
--- /dev/null
+++ b/network/hylafax/config.local.in
@@ -0,0 +1,255 @@
+# $Id: config.site,v 1.24 2009/04/23 12:45:30 aidan Exp $
+#
+# HylaFAX Facsimile Software
+#
+# Copyright (c) 1990-1996 Sam Leffler
+# Copyright (c) 1991-1996 Silicon Graphics, Inc.
+# HylaFAX is a trademark of Silicon Graphics, Inc.
+# 
+# Permission to use, copy, modify, distribute, and sell this software and 
+# its documentation for any purpose is hereby granted without fee, provided
+# that (i) the above copyright notices and this permission notice appear in
+# all copies of the software and related documentation, and (ii) the names of
+# Sam Leffler and Silicon Graphics may not be used in any advertising or
+# publicity relating to the software without the specific, prior written
+# permission of Sam Leffler and Silicon Graphics.
+# 
+# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, 
+# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY 
+# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
+# 
+# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
+# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
+# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF 
+# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 
+# OF THIS SOFTWARE.
+#
+
+#
+# This file holds site-specific configuration parameters.
+#
+# Nothing is defined in here by default, the definitions
+# commented out below serve as documentation for what you
+# can set in this file or a config.local file.
+#
+# Note that you do not need to set anything here unless you
+# want to override the auto-configuration behaviour and/or
+# interactive prompting done by the configure script.
+#
+
+#
+# Package controls.
+#
+#DSO="auto"			# configure DSO support (auto|IRIX|no)
+#GETTY="auto"			# type of getty support (auto|BSD|SysV)
+#PS="auto"			# PostScript support to use (auto|gs|dps|imp)
+#SGI2FAX="auto"			# configure SGI image support (auto|yes|no)
+#DPS="no"			# install SGI DPS-based RIP (yes|no)
+GS="no" 			# install Ghostscript RIP (yes|no)
+#IMP="no"			# install SGI Impressario 2.1 support (yes|no)
+#REGEX="yes"			# use distributed regular expression package
+#UTMP="utmpx"			# type of utmp+wtmp handling (auto|utmp|utmpx)
+#NLS="auto"			# enable NLS support (auto|yes|no)
+
+#
+# Directory parameters.
+#
+DIR_BIN="/usr/bin"		        # directory for client apps
+DIR_LIB="/usr/lib@LIBDIRSUFFIX@"        # directory for libfaxserver, libfaxutil
+DIR_LIBDATA="/usr/lib@LIBDIRSUFFIX@/hylafax"		# directory for client data
+DIR_LIBEXEC="/usr/libexec/hylafax"	# directory for libraries&hidden apps
+DIR_LOCALE='/usr/share/locale'
+DIR_MAN="/usr/man"		        # directory for manual pages
+DIR_SPOOL="/var/spool/hylafax"		# directory for spooling area
+DIR_SBIN="/usr/sbin"		        # directory for system apps
+#DIR_LOCKS="/usr/spool/locks"		# directory for UUCP lock files
+#FONTMAP="/usr/share/ghostscript/3.33"	# directorys containing Fontmap files
+#PATH_AFM="/usr/lib@LIBDIRSUFFIX@/DPS/AFM"		# directorys for AFM files
+
+#
+# Miscellaneous parameters.
+#
+#DEFVRES="196"				# default vertical res for outbound fax
+#FILLORDER="MS2LSB"			# bit order of cpu (MSB2LSB/LSB2MSB)
+FAXGID="uucp"				# group ID for fax user
+FAXUID="uucp"				# user ID for fax user
+PAGESIZE="North American Letter"	# default page size
+SYSGID="root"				# group ID for system installs
+SYSUID="root"				# user ID for system installs
+#LOCKS="ascii"				# default UUCP lockfile scheme
+#
+#PATH_GETTY="/etc/getty"		# pathname of suitable getty program
+#PATH_VGETTY="/bin/vgetty"		# pathname of voice getty program
+#PATH_EGETTY="/bin/egetty"		# pathname of external getty program
+#PATH_SENDMAIL="/usr/lib@LIBDIRSUFFIX@/sendmail"	# pathname of suitable sendmail program
+PATH_GSRIP="/usr/bin/gs"		# pathname of Ghostscript-based RIP
+#PATH_DPSRIP="/var/spool/hylafax/bin/ps2fax.exe" # pathname of DPS-based RIP
+#PATH_IMPRIP="/usr/lib@LIBDIRSUFFIX@/print/psrip"	# pathname of Impressario 2.1 RIP
+#MANSCHEME="sysv-source-cat-strip"	# manual page installation scheme
+SYSVINIT="auto"		                # install SysV-style init support (auto|yes|no)
+DIR_SYSVINIT="/etc/rc.d"                # location of SysV-style init script
+DIR_SYSVINITSTART="/etc/rc.d"	        # location of SysV-style start script
+DIR_SYSVINITSTOP="/etc/rc.d"	        # location of SysV-style stop script
+NAME_SYSVINITSTART="rc.hylafax"	        # name of SysV-style start script
+NAME_SYSVINITSTOP="rc.hylafax"	        # name of SysV-style stop script
+FAXQ_SERVER=yes		                # init script starts faxq
+HFAXD_SERVER=yes		        # init script starts hfaxd
+HFAXD_SNPP_SERVER=no		        # don't start paging protocol
+
+# SVR4 packaging stuff
+#PKG_ARCH=				# ARCH variable in pkginfo file
+#PKG_EMAIL=someone@somehost.somedomain	# EMAIL variable in pkginfo file
+#PKG_VENDOR="Your Name Here"		# VENDOR variable in pkginfo file
+#
+
+#
+# Parameters used when building the software.
+#
+# Note that configure has several ENVOPTS built into it that are
+# set according to the target.  This is done to help naive folks.
+#
+# Beware of changing the INSTALL definition; you *must* have an
+# install script that emulates the Silicon Graphics install program!
+#
+#AR="/bin/ar"				# pathname of suitable ar program
+#AROPTS="rc"				# options to ar for creating archive
+#CC="gcc"				# name/pathname of C compiler
+#CXX="gcc"				# name/pathname of C++ compiler
+#CXXFILE="-x c++"			# options for proper C++ processing
+#ENVOPTS="-Aa"				# options for getting ANSI C
+#GCOPTS="-g"				# options to pass C compiler
+#GCXXOPTS="-g"				# options to pass C++ compiler
+#GENDIST="/sbin/gendist"		# pathname of SGI inst generator program
+#INSTALL='${SHELL} ${PORT}/install.sh'	# SGI install program/emulator
+#LIBMALLOC="auto"			# yes|no|auto configure -lmalloc use
+#LIBPORT='${PORT}/libport.a'		# library with emulation code
+#LIBSUN="auto"				# yes|no|auto configure -lsun use
+#LLDOPTS=""				# extra link line options
+#MACHDEPLIBS=""				# extra libraries for linking
+#OPTIMIZER="-O"				# optimizer flags
+#PORTFUNCS=""				# non-standard functions to emulate
+#PROTOTYPES="-prototypes"		# C compiler options for checking function prototypes
+#RANLIB=":"				# pathname of suitable ranlib program
+#SHDLIBC="-lc_s"			# shared C library, if not standard
+#SIGHANDLERTYPES='(void(*)(int,...))'	# types to check for signal handler
+#STRIP="/bin/strip"			# strip program used by install.sh
+
+#
+# The source for the TIFF library is not required
+# to build this software, but the library is required
+# to link against.  If libtiff is installed in a
+# non-standard location then setup LIBTIFF accordingly.
+#
+LIBTIFF="-L/usr/lib@LIBDIRSUFFIX@ -ltiff"	# linkage convention for libtiff
+TIFFINC="-I/usr/include"		# place to find tiffio.h
+TIFFBIN="/usr/bin"		# where TIFF tools live
+
+#
+# The source for the ZLIB library is not required
+# to build this software, but the library is required
+# to link against.  If ZLIB is installed in a 
+# non-standard location then setup LIBZ accordingly.
+#
+LIBZ="-L/usr/lib@LIBDIRSUFFIX@ -lz"		# linkage convention for libz
+ZLIBINC="-I/usr/include"	# place to find zlib.h
+
+#
+# The source for the POSIX regular expression package
+# is not required to build this software, but the package
+# is required to link against.  If the copy of the software
+# that is included in this distribution is not to be used
+# then set REGEX=no and supply the following definitions.
+#
+#LIBREGEX=""				# linkage convention for regex package
+#REGEXINC="-I/usr/include"		# place to find regex.h
+
+#
+# NLS (gettext) library support is used by default if it's found
+# xgettext is not required to build this software, but if you try
+# and rebuild the message template catalogs, you will need it.  Some
+# platforms may need extra options to link for libintl as well.
+#
+INTLINC="-I/usr/include"
+#LIBINTL=""				# configure will try LIBINTL="-lintl"
+#XGETTEXT="xgettext --foreign-user -ctranslator --no-wrap --sort-by-file --omit-header --strict --indent --force-po"
+#MSGMERGE="msgmerge --no-wrap --sort-by-file"
+#MSGFMT=msgfmt
+#MSGCAT=msgcat
+
+#
+# Parameters to control various workarounds for system bugs.
+#
+# These parameters are normally set in configure based on
+# the target system.  If they are set here, then they will
+# override anything done by configure.
+#
+#CONFIG_OPENFIFO="O_RDONLY"		# mode to open FIFOs in server proc's
+#CONFIG_FIFOBUG="yes"			# enable workaround for FIFO select bug
+#CONFIG_TIOCMBISBYREF="yes"		# pass arg by reference to ioctl
+#CONFIG_WINSZHACK="no"			# include extra files for TIOCWINSZ use
+#CONFIG_ABORTBUG="no"			# enable workaround for abort problems
+#CONFIG_NOREOPEN="yes"			# reopen tty device after toggling DTR
+#CONFIG_NOSTDINDUP="yes"		# do not redirect stdout to stdin in ondelay
+#CONFIG_BADEXECVPROTO="no"		# system has incorrect execv func decl
+#CONFIG_BADEXECVEPROTO="no"		# system has incorrect execve func decl
+#CONFIG_BADGETOPTPROTO="no"		# system has incorrect getopt func decl
+#CONFIG_SOCKARGLENTYPE="unsigned long"	# call-by-ref arg type for socket funcs
+#CONFIG_BADSELECTPROTO="no"		# system has way old select func decl
+#CONFIG_MAXGID="5999"			# maximum permissable GID
+#CONFIG_OSFCNH="auto"			# control inclusion of <osfcn.h>
+
+#
+# Dynamic Shared Object (DSO) support.
+#
+# Beware that adding new support for DSOs may require some
+# modifications to the */Makefile.dso files.
+#
+#DSOSUF="so"				# DSO filename suffix
+#DSODELAY="-delay_load"			# DSO option for delayed loading
+#DSOOPTS="-shared -rdata_shared"	# options for building DSOs
+
+#
+# Makefile construction parameters.
+#
+# These should not normally be set; configure will
+# deduce the appropriate syntax to use for includes.
+#
+#MAKECXXOVERRIDE="=.C"			# make override stuff for SunPRO C++
+#MAKEDEPINCLUDE="include"		# make include for dependency files
+#MAKEDSOINCLUDE="#"			# make include for DSO support
+#MAKEINCLUDE=".include"			# make include syntax
+#MAKELQUOTE="<"				# make include syntax
+#MAKERQUOTE=">"				# make include syntax
+#SETMAKE='MAKE	= ${MAKE}'		# define if make does not setup $MAKE
+#MKDEPCOPTS=""				# C compiler opts to supply w/ -M
+#MKDEPCXXOPTS=""			# C++ compiler opts to supply w/ -M
+
+#
+# General system stuff used by the distribution.
+#
+# Beware of setting these as configure selects several programs
+# based on whether or not they are capable of processing scripts
+# included in the distribution (e.g AWK and SCRIPT_SH, SED).
+#
+#AWK="/bin/awk"				# pathname of suitable awk program
+#CAT="/bin/cat"				# pathname of suitable cat program
+#CHGRP="/etc/chgrp"			# pathname of suitable chgrp program
+#CHMOD="/etc/chmod"			# pathname of suitable chmod program
+#CHOWN="/etc/chown"			# pathname of suitable chown program
+#CMP="/bin/cmp"				# pathname of suitable cmp program
+#COL="/bin/col"				# pathname of suitable col program
+#CP="/bin/cp"				# pathname of suitable cp program
+#ECHO="/bin/echo"			# pathname of suitable echo program
+#GREP="/bin/grep"			# pathname of suitable grep program
+#LN="/bin/ln"				# pathname of suitable ln program
+#LN_S="-s"				# option to ${LN} to create symlink
+#MAN="/usr/bin/man"			# pathname of suitable man program
+MKDIR="/bin/mkdir -p"			# pathname of suitable mkdir program
+#MKFIFO="/bin/mkfifo"			# pathname of suitable mkfifo program
+#MV="/bin/mv"				# pathname of suitable mv program
+#MV_F="-f"				# option to ${MV} to force operation
+#RMCMD="/bin/rm"			# pathname of suitable rm program
+#SED="/bin/sed"				# pathname of suitable sed program
+#SCRIPT_SH="/bin/sh"			# pathname of suitable shell
+#SORT="/bin/sort"			# pathname of suitable sort program