network/elemental-ircd: Added (high performance irc daemon).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

1 files changed, 609 insertions, 0 deletions

diff --git a/network/elemental-ircd/slackware.conf b/network/elemental-ircd/slackware.conf
new file mode 100644
index 0000000000..fc9d8401ba
--- /dev/null
+++ b/network/elemental-ircd/slackware.conf
@@ -0,0 +1,609 @@
+/* /etc/elemental-ircd/slackware.conf - brief example configuration file
+ *
+ * Copyright (C) 2000-2002 Hybrid Development Team
+ * Copyright (C) 2002-2005 ircd-ratbox development team
+ * Copyright (C) 2005-2006 charybdis development team
+ * Copyright (C) 2014      Elemental-IRCd development team
+ *
+ * $Id: example.conf 3582 2007-11-17 21:55:48Z jilles $
+ *
+ * See reference.conf for more information.
+ */
+
+/* Extensions */
+#loadmodule "extensions/chm_adminonly.so";
+loadmodule "extensions/chm_operonly.so";
+#loadmodule "extensions/chm_sslonly.so";
+#loadmodule "extensions/chm_operonly_compat.so";
+#loadmodule "extensions/chm_quietunreg_compat.so";
+#loadmodule "extensions/chm_sslonly_compat.so";
+#loadmodule "extensions/createauthonly.so";
+loadmodule "extensions/extb_account.so";
+loadmodule "extensions/extb_canjoin.so";
+loadmodule "extensions/extb_channel.so";
+loadmodule "extensions/extb_extgecos.so";
+loadmodule "extensions/extb_oper.so";
+loadmodule "extensions/extb_realname.so";
+#loadmodule "extensions/extb_server.so";
+#loadmodule "extensions/extb_ssl.so";
+#loadmodule "extensions/hurt.so";
+loadmodule "extensions/ip_cloaking.so";
+#loadmodule "extensions/m_findforwards.so";
+loadmodule "extensions/m_identify.so";
+loadmodule "extensions/m_mkpasswd.so";
+loadmodule "extensions/m_webirc.so";
+#loadmodule "extensions/m_cycle.so";
+#loadmodule "extensions/m_oaccept.so";
+#loadmodule "extensions/m_opme.so";
+#loadmodule "extensions/m_ojoin.so";
+#loadmodule "extensions/m_omode.so";
+#loadmodule "extensions/m_olist.so";
+#loadmodule "extensions/m_okick.so";
+#loadmodule "extensions/m_force.so";
+#loadmodule "extensions/m_roleplay.so";
+#loadmodule "extensions/no_oper_invis.so";
+loadmodule "extensions/sno_farconnect.so";
+loadmodule "extensions/sno_globalkline.so";
+loadmodule "extensions/sno_globaloper.so";
+#loadmodule "extensions/sno_whois.so";
+
+serverinfo {
+	name = "hostname.domain.tld";
+	sid = "42X";
+	description = "elemental-ircd test server";
+	network_name = "ShadowNET";
+	network_desc = "Your IRC network.";
+	helpchan = "#help";
+	helpurl = "http://www.mynet.net/help";
+	hub = yes;
+
+	/* On multi-homed hosts you may need the following. These define
+	 * the addresses we connect from to other servers. */
+	/* for IPv4 */
+	#vhost = "192.169.0.1";
+	/* for IPv6 */
+	#vhost6 = "3ffe:80e8:546::2";
+
+	/* ssl_private_key: our ssl private key */
+	ssl_private_key = "etc/ssl.key";
+
+	/* ssl_cert: certificate for our ssl server */
+	ssl_cert = "etc/ssl.cert";
+
+	/* ssl_dh_params: DH parameters, generate with openssl dhparam -out dh.pem 1024 */
+	ssl_dh_params = "etc/dh.pem";
+
+	/* ssld_count: number of ssld processes you want to start, if you
+	 * have a really busy server, using N-1 where N is the number of
+	 * cpu/cpu cores you have might be useful. A number greater than one
+	 * can also be useful in case of bugs in ssld and because ssld needs
+	 * two file descriptors per SSL connection.
+	 */
+	ssld_count = 1;
+
+	/* default max clients: the default maximum number of clients
+	 * allowed to connect.  This can be changed once ircd has started by
+	 * issuing:
+	 *   /quote set maxclients <limit>
+	 */
+	default_max_clients = 1024;
+};
+
+admin {
+	name = "Lazy admin (lazya)";
+	description = "ShadowNET client server";
+	email = "nobody@127.0.0.1";
+};
+
+log {
+	fname_userlog = "/var/log/elemental-ircd/userlog";
+	#fname_fuserlog = "/var/log/elemental-ircd/fuserlog";
+	fname_operlog = "/var/log/elemental-ircd/operlog";
+	#fname_foperlog = "/var/log/elemental-ircd/foperlog";
+	fname_serverlog = "/var/log/elemental-ircd/serverlog";
+	#fname_klinelog = "/var/log/elemental-ircd/klinelog";
+	fname_killlog = "/var/log/elemental-ircd/killlog";
+	fname_operspylog = "/var/log/elemental-ircd/operspylog";
+	#fname_ioerrorlog = "/var/log/elemental-ircd/ioerror";
+};
+
+/* class {} blocks MUST be specified before anything that uses them.  That
+ * means they must be defined before auth {} and before connect {}.
+ */
+class "users" {
+	ping_time = 2 minutes;
+	number_per_ident = 10;
+	number_per_ip = 10;
+	number_per_ip_global = 50;
+	cidr_ipv4_bitlen = 24;
+	cidr_ipv6_bitlen = 64;
+	number_per_cidr = 200;
+	max_number = 3000;
+	sendq = 400 kbytes;
+};
+
+class "opers" {
+	ping_time = 5 minutes;
+	number_per_ip = 10;
+	max_number = 1000;
+	sendq = 1 megabyte;
+};
+
+class "server" {
+	ping_time = 5 minutes;
+	connectfreq = 5 minutes;
+	max_number = 1;
+	sendq = 4 megabytes;
+};
+
+listen {
+	/* defer_accept: wait for clients to send IRC handshake data before
+	 * accepting them.  if you intend to use software which depends on the
+	 * server replying first, such as BOPM, you should disable this feature.
+	 * otherwise, you probably want to leave it on. Disabling this will not
+	 * update on a rehash.
+	 */
+	defer_accept = yes;
+
+	/* If you want to listen on a specific IP only, specify host.
+	 * host definitions apply only to the following port line.
+	 */
+	#host = "192.169.0.1";
+	port = 5000, 6665 .. 6669;
+	sslport = 6697;
+
+	/* Listen on IPv6 (if you used host= above). */
+	#host = "3ffe:1234:a:b:c::d";
+	#port = 5000, 6665 .. 6669;
+	#sslport = 9999;
+};
+
+/* auth {}: allow users to connect to the ircd (OLD I:)
+ * auth {} blocks MUST be specified in order of precedence.  The first one
+ * that matches a user will be used.  So place spoofs first, then specials,
+ * then general access, then restricted.
+ */
+auth {
+	/* user: the user@host allowed to connect.  Multiple IPv4/IPv6 user
+	 * lines are permitted per auth block.  This is matched against the
+	 * hostname and IP address (using :: shortening for IPv6 and
+	 * prepending a 0 if it starts with a colon) and can also use CIDR
+	 * masks.
+	 */
+	user = "*@172.16.0.0/12";
+	user = "*test@123D:B567:*";
+
+	/* auth_user: The username (authenticated via SASL or PASS) allowed
+	 * to connect. You are able to put multiple auth_user lines. If people
+	 * are authenticating via SASL in this way, it is recommended to comment
+	 * out the password option below. You will also *NEED* to specify a user
+	 * line above auth_user, this can safely be "*@*", however.
+	 */
+	auth_user = "jilles";
+	auth_user = "jdhore";
+
+	/* password: an optional password that is required to use this block.
+	 * By default this is not encrypted, specify the flag "encrypted" in
+	 * flags = ...; below if it is.
+	 */
+	password = "letmein";
+
+	/* spoof: fake the users user@host to be be this.  You may either
+	 * specify a host or a user@host to spoof to.  This is free-form,
+	 * just do everyone a favour and dont abuse it. (OLD I: = flag)
+	 */
+        spoof = "I.still.hate.packets";
+
+	/* autojoin: Channel (or channels, comma-seperated) to join users
+	 * in this auth block to on connect. Note that this won't join
+	 * the user through any bans or otherwise restrictive chmodes.
+	 */
+	autojoin = "#shadowircd,#test";
+
+	/* Possible flags in auth:
+	 *
+	 * encrypted                  | password is encrypted with mkpasswd
+	 * spoof_notice               | give a notice when spoofing hosts
+	 * exceed_limit (old > flag)  | allow user to exceed class user limits
+	 * kline_exempt (old ^ flag)  | exempt this user from k/g/xlines&dnsbls
+	 * dnsbl_exempt		      | exempt this user from dnsbls
+	 * spambot_exempt	      | exempt this user from spambot checks
+	 * shide_exempt		      | exempt this user from serverhiding
+	 * jupe_exempt                | exempt this user from generating
+	 *                              warnings joining juped channels
+	 * resv_exempt		      | exempt this user from resvs
+	 * flood_exempt               | exempt this user from flood limits
+	 *                                     USE WITH CAUTION.
+	 * no_tilde     (old - flag)  | don't prefix ~ to username if no ident
+	 * need_ident   (old + flag)  | require ident for user in this class
+	 * need_ssl                   | require SSL/TLS for user in this class
+	 * need_sasl                  | require SASL id for user in this class
+	 */
+	flags = kline_exempt, exceed_limit;
+
+	/* class: the class the user is placed in */
+	class = "opers";
+};
+
+/* Example WEBIRC authblock */
+auth {
+	/* user: webirc@IP.OF.YOUR.WEBIRC . the webirc@ part is required */
+	user = "webirc@192.168.1.1";
+
+	/* password: password the webirc client sends in the WEBIRC command.
+	 * You can use a encrypted password here (see above auth block).
+	 */
+	password = "<password>";
+
+	/* spoof: This is required to keep it what it is currently if you
+	 * want the webirc client to show the users' real host as their
+	 * host on IRC.
+	 */
+	spoof = "webirc.";
+	class = "users";
+};
+
+auth {
+	user = "*@*";
+	class = "users";
+	flags = no_tilde;
+};
+
+/* privset {} blocks MUST be specified before anything that uses them.  That
+ * means they must be defined before operator {}.
+ */
+privset "local_op" {
+	privs = oper:local_kill, oper:operwall;
+};
+
+privset "server_bot" {
+	extends = "local_op";
+	privs = oper:kline, oper:remoteban, snomask:nick_changes;
+};
+
+privset "global_op" {
+	extends = "local_op";
+	privs = oper:global_kill, oper:routing, oper:kline, oper:unkline, oper:xline,
+		oper:resv, oper:mass_notice, oper:remoteban;
+};
+
+privset "admin" {
+	extends = "global_op";
+	privs = oper:admin, oper:die, oper:rehash, oper:spy, oper:override;
+};
+
+operator "god" {
+	/* name: the name of the oper must go above */
+
+	/* user: the user@host required for this operator.  CIDR *is*
+	 * supported now. auth{} spoofs work here, other spoofs do not.
+ 	 * multiple user="" lines are supported.
+	 */
+	user = "*god@127.0.0.1";
+
+	/* password: the password required to oper.  Unless ~encrypted is
+	 * contained in flags = ...; this will need to be encrypted using
+	 * mkpasswd, MD5 is supported
+	 */
+	password = "etcnjl8juSU1E";
+
+	/* rsa key: the public key for this oper when using Challenge.
+	 * A password should not be defined when this is used, see
+	 * doc/challenge.txt for more information.
+	 */
+	#rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
+
+	/* umodes: the specific umodes this oper gets when they oper.
+	 * If this is specified an oper will not be given oper_umodes
+	 * These are described above oper_only_umodes in general {};
+	 */
+	#umodes = locops, servnotice, operwall, wallop;
+
+	/* fingerprint: if specified, the oper's client certificate
+	 * fingerprint will be checked against the specified fingerprint
+	 * below.
+	 */
+	#fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b";
+
+	/* snomask: specific server notice mask on oper up.
+	 * If this is specified an oper will not be given oper_snomask.
+	 */
+	snomask = "+Zbfkrsuy";
+
+	/* vhost: defines the vhost that this oper will get on oper up.
+	 * this must be a valid hostmask. If this is specified the oper
+	 * will not be given default_operhost.
+	 */
+	vhost = "is.an.oper";
+
+	/* swhois: defines an additional line that will be displayed
+	 * whenever someone does /whois on the oper in question.
+	 */
+	swhois = "is wearing pants.";
+
+	/* operstring: defines a custom operstring for this oper,
+	 * which will be shown in whois instead of default_operstring
+	 * or default_adminstring.
+	 */
+	operstring = "is a lazy IRC Operator";
+
+	/* flags: misc options for the operator.  You may prefix an option
+	 * with ~ to disable it, e.g. ~encrypted.
+	 *
+	 * Default flags are encrypted.
+	 *
+	 * Available options:
+	 *
+	 * encrypted:    the password above is encrypted [DEFAULT]
+	 * need_ssl:     must be using SSL/TLS to oper up
+         */
+	flags = encrypted;
+
+	/* privset: privileges set to grant */
+	privset = "admin";
+};
+
+connect "irc.uplink.com" {
+	host = "192.168.0.1";
+	send_password = "password";
+	accept_password = "anotherpassword";
+	port = 6666;
+	hub_mask = "*";
+	class = "server";
+	flags = compressed, topicburst;
+
+	#fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b";
+
+	/* If the connection is IPv6, uncomment below.
+	 * Use 0::1, not ::1, for IPv6 localhost. */
+	#aftype = ipv6;
+};
+
+connect "ssl.uplink.com" {
+	host = "192.168.0.1";
+	send_password = "password";
+	accept_password = "anotherpassword";
+	port = 9999;
+	hub_mask = "*";
+	class = "server";
+	flags = ssl, topicburst;
+};
+
+service {
+	name = "services.int";
+};
+
+cluster {
+	name = "*";
+	flags = kline, tkline, unkline, xline, txline, unxline, resv, tresv, unresv;
+};
+
+shared {
+	oper = "*@*", "*";
+	flags = all;
+};
+
+/* exempt {}: IPs that are exempt from Dlines and rejectcache. (OLD d:) */
+exempt {
+	ip = "127.0.0.1";
+};
+
+channel {
+	#disabledmodes = "ME";
+	autochanmodes = "nt";
+	admin_on_channel_create = no;
+	exemptchanops = "NT";
+	use_halfop = yes;
+	use_admin = yes;
+	use_owner = yes;
+	use_knock = yes;
+	use_local_channels = yes;
+	knock_delay = 5 minutes;
+	knock_delay_channel = 1 minute;
+	max_chans_per_user = 15;
+	max_bans = 100;
+	max_bans_large = 500;
+	default_split_user_count = 0;
+	default_split_server_count = 0;
+	no_create_on_split = no;
+	no_join_on_split = no;
+	burst_topicwho = yes;
+	kick_on_split_riding = no;
+	only_ascii_channels = no;
+	cycle_host_change = yes;
+	host_in_topic = yes;
+	resv_forcepart = yes;
+	channel_target_change = yes;
+};
+
+serverhide {
+	flatten_links = yes;
+	links_delay = 5 minutes;
+        hidden = no;
+	disable_hidden = no;
+};
+
+/* These are the blacklist settings.
+ * You can have multiple combinations of host and rejection reasons.
+ * They are used in pairs of one host/rejection reason.
+ *
+ * These settings should be adequate for most networks, and are (presently)
+ * required for use on ShadowNet.
+ *
+ * Word to the wise: Do not use blacklists like SPEWS for blocking IRC
+ * connections.
+ *
+ * As of charybdis 2.1.3, you can do some keyword substitution on the rejection
+ * reason. The available keyword substitutions are:
+ *
+ *   ${ip}           - the user's IP
+ *   ${host}         - the user's canonical hostname
+ *   ${dnsbl-host}   - the dnsbl hostname the lookup was done against
+ *   ${nick}         - the user's nickname
+ *   ${network-name} - the name of the network
+ *
+ */
+blacklist {
+	host = "rbl.efnetrbl.org";
+	reject_reason = "${nick}, your IP (${ip}) is listed in EFnet's RBL. For assistance, see http://efnetrbl.org/?i=${ip}";
+
+	host = "dnsbl.dronebl.org";
+	reject_reason = "${nick}, your IP (${ip}) is listed in DroneBL. For assistance, see http://dronebl.org/lookup_branded.do?ip=${ip}&network=${network-name}";
+
+	host = "torexit.dan.me.uk";
+	reject_reason = "${nick}, your IP (${ip}) is listed as a TOR exit node. In order to protect ${network-name} from TOR-based abuse, we are not allowing TOR exit nodes to connect to our network.";
+};
+
+alias "NickServ" {
+	target = "NickServ";
+};
+
+alias "ChanServ" {
+	target = "ChanServ";
+};
+
+alias "OperServ" {
+	target = "OperServ";
+};
+
+alias "MemoServ" {
+	target = "MemoServ";
+};
+
+alias "HostServ" {
+	target = "HostServ";
+};
+
+alias "BotServ" {
+	target = "BotServ";
+};
+
+alias "InfoServ" {
+	target = "InfoServ";
+};
+
+alias "GroupServ" {
+	target = "GroupServ";
+};
+
+alias "NS" {
+	target = "NickServ";
+};
+
+alias "CS" {
+	target = "ChanServ";
+};
+
+alias "OS" {
+	target = "OperServ";
+};
+
+alias "MS" {
+	target = "MemoServ";
+};
+
+alias "HS" {
+	target = "HostServ";
+};
+
+alias "BS" {
+	target = "BotServ";
+};
+
+alias "IS" {
+	target = "InfoServ";
+};
+
+alias "GS" {
+	target = "GroupServ";
+};
+
+general {
+	hide_error_messages = opers;
+	hide_spoof_ips = yes;
+
+	/*
+	 * default umodes: umodes to set upon connection
+	 * If you have enabled the ip_cloaking extension, and you wish for
+	 * incoming clients to be cloaked upon connection, +x must be in
+	 * the umode string below.
+	 */
+	default_umodes = "+ix";
+
+	default_operstring = "is an IRC Operator";
+	default_adminstring = "is a Server Administrator";
+	#default_operhost = "staff.testnet.net";
+	#static_quit = "I like turtles!";
+	servicestring = "is a Network Service";
+	disable_fake_channels = no;
+	hide_channel_below_users = 3;
+	tkline_expire_notices = no;
+	default_floodcount = 10;
+	failed_oper_notice = yes;
+	dots_in_ident=2;
+	min_nonwildcard = 4;
+	min_nonwildcard_simple = 3;
+	max_accept = 100;
+	max_monitor = 100;
+	anti_nick_flood = yes;
+	max_nick_time = 20 seconds;
+	max_nick_changes = 5;
+	anti_spam_exit_message_time = 5 minutes;
+	use_part_messages = yes;
+	ts_warn_delta = 30 seconds;
+	ts_max_delta = 5 minutes;
+	client_exit = yes;
+	collision_fnc = yes;
+	global_snotices = yes;
+	dline_with_reason = yes;
+	kline_delay = 0 seconds;
+	kline_with_reason = yes;
+	kline_reason = "K-Lined";
+	identify_service = "NickServ@services.int";
+	identify_command = "IDENTIFY";
+	non_redundant_klines = yes;
+	warn_no_nline = yes;
+	use_propagated_bans = yes;
+	stats_e_disabled = no;
+	stats_c_oper_only=no;
+	stats_h_oper_only=no;
+	stats_y_oper_only=no;
+	stats_o_oper_only=yes;
+	stats_P_oper_only=no;
+	stats_i_oper_only=masked;
+	stats_k_oper_only=masked;
+	map_oper_only = no;
+	operspy_admin_only = no;
+	operspy_dont_care_user_info = no;
+	secret_channels_in_whois = no;
+	caller_id_wait = 1 minute;
+	pace_wait_simple = 1 second;
+	pace_wait = 10 seconds;
+	short_motd = no;
+	ping_cookie = no;
+	connect_timeout = 30 seconds;
+	default_ident_timeout = 5;
+	disable_auth = no;
+	no_oper_flood = yes;
+	true_no_oper_flood = no;
+	max_targets = 4;
+	client_flood = 20;
+	use_whois_actually = no;
+	oper_only_umodes = operwall, locops, servnotice;
+	oper_umodes = locops, servnotice, operwall, wallop;
+	oper_snomask = "+s";
+	burst_away = yes;
+	nick_delay = 0 seconds; # 15 minutes if you want to enable this
+	reject_ban_time = 1 minute;
+	reject_after_count = 3;
+	reject_duration = 5 minutes;
+	throttle_duration = 60;
+	throttle_count = 4;
+	expire_override_time = 5 minutes;
+	away_interval = 30;
+};
+
+modules {
+	path = "/usr/lib@LIBDIRSUFFIX@/elemental-ircd/modules";
+	path = "/usr/lib@LIBDIRSUFFIX@/elemental-ircd/modules/autoload";
+};