network/dovecot: Updated for version 1.1.3

6 files changed, 53 insertions, 62 deletions

diff --git a/network/dovecot/README b/network/dovecot/README
index d69ab96481..8481c55139 100644
--- a/network/dovecot/README
+++ b/network/dovecot/README
@@ -1,16 +1,9 @@
 This script builds dovecot with support for SSL. As such, you must have
-openssl installed.  openssl-solibs is not enough in itself to meet this
+openssl installed - openssl-solibs is not enough in itself to meet this
 requirement.  Additionally, dovecot will be compiled with POP3 support.
 Unfortunately, dovecot does not have a man page at this time, so you'll
 have to find your documentation elsewhere.  A few examples are included
-in /usr/doc/dovecot-$VERSION and the dovecot team maintains a wiki that
-may prove useful: http://wiki.dovecot.org.
-
-You should probably create a dovecot user to run the login processes on
-your server. The build script will exit with an error if you don't have
-this user on your system. You should ensure dovecot has a low UID, such
-as 91 (this is a low, unused UID on a stock Slackware-11.0 box).
-
-If you have any questions or comments about this script you are free to
-contact me via e-mail at <alan@lizella.net>.  Thanks!
+in /usr/doc/dovecot-1.1.3.  The dovecot team maintains a wiki that may 
+prove useful:  http://wiki.dovecot.org
 
+You should create a dovecot user to run the login processes on your server. 
diff --git a/network/dovecot/doinst.sh b/network/dovecot/doinst.sh
index 1142a48442..088bd4ecc8 100644
--- a/network/dovecot/doinst.sh
+++ b/network/dovecot/doinst.sh
@@ -1,15 +1,22 @@
-#!/bin/sh
-
 config() {
   NEW="$1"
-  OLD="`dirname $NEW`/`basename $NEW .new`"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
   # If there's no config file by that name, mv it over:
   if [ ! -r $OLD ]; then
     mv $NEW $OLD
-  elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
     rm $NEW
   fi
   # Otherwise, we leave the .new copy for the admin to consider...
 }
 
-config etc/dovecot-example.conf.new
+# Keep same perms on rc.dovecot.new:
+if [ -e etc/rc.d/rc.dovecot ]; then
+  cp -a etc/rc.d/rc.dovecot etc/rc.d/rc.dovecot.new.incoming
+  cat etc/rc.d/rc.dovecot.new > etc/rc.d/rc.dovecot.new.incoming
+  mv etc/rc.d/rc.dovecot.new.incoming etc/rc.d/rc.dovecot.new
+fi
+
+config etc/rc.d/rc.dovecot.new
+
diff --git a/network/dovecot/dovecot.SlackBuild b/network/dovecot/dovecot.SlackBuild
index 175913b591..40354ad001 100644
--- a/network/dovecot/dovecot.SlackBuild
+++ b/network/dovecot/dovecot.SlackBuild
@@ -1,4 +1,5 @@
 #!/bin/bash
+
 # Copyright 2006, Alan Hicks, Lizella, GA
 # All rights reserved.
 #
@@ -19,87 +20,77 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-set -e
-
 PRGNAM="dovecot"
-VERSION="1.0.3"
+VERSION="1.1.3"
 ARCH=${ARCH:-i486}
 BUILD=${BUILD:-1}
 TAG=${TAG:-_SBo}
 
-CWD=`pwd`
+CWD=$(pwd)
 TMP=${TMP:-/tmp/SBo}
 PKG="$TMP/pkg-$PRGNAM"
 OUTPUT=${OUTPUT:-/tmp}
 
-
 # Bail if user isn't valid on your system
-if ! grep ^dovecot: /etc/passwd 2>&1 > /dev/null; then
-  echo "  Must have a dovecot user to run this script."
+if ! grep -q ^dovecot: /etc/passwd ; then
+  echo "  You must have a dovecot user to run this script."
   echo "    # groupadd -g 202 dovecot"
   echo "    # useradd -d /dev/null -s /bin/false -u 202 -g 202 dovecot"
   echo "  Or something similar."
   exit 1
 fi
 
+set -e
+
 if [ "$ARCH" = "i486" ]; then
    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
 elif [ "$ARCH" = "i686" ]; then
    SLKCFLAGS="-O2 -march=i686 -mtune=i686"
 fi
 
-CFLAGS="$SLKCFLAGS"
-CXXFLAGS="$SLKCFLAGS"
-
-rm -fr $PKG
+rm -rf $PKG
 mkdir -p $TMP $PKG $OUTPUT
 cd $TMP
-tar xvzf $CWD/$PRGNAM-$VERSION.tar.gz
-
-chmod -R a-s,u+w,go+r-w $PRGNAM-$VERSION
-chown -R root:root $PRGNAM-$VERSION
-
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
 cd $PRGNAM-$VERSION
+chmod -R a-s,u+w,go+r-w .
+chown -R root:root .
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
 ./configure \
   --prefix=/usr \
   --sysconfdir=/etc \
   --localstatedir=/var \
   --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --enable-header-install \
   --with-notify=inotify \
   --disable-ipv6 \
   --without-pam \
-  --with-pop3d
+  --with-pop3d \
+  --disable-static \
+  --build=$ARCH-slackware-linux
 
 make
 make install-strip DESTDIR=$PKG
 
-mkdir -p $PKG/install $PKG/usr/doc/$PRGNAM-$VERSION $PKG/etc/rc.d
-cp -a AUTHORS COPYING COPYING.LGPL COPYING.MIT ChangeLog INSTALL NEWS README TODO \
-   doc/* $PKG/usr/doc/$PRGNAM-$VERSION/
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a AUTHORS COPYING COPYING.LGPL COPYING.MIT ChangeLog INSTALL NEWS \
+   README TODO doc/* $PKG/usr/doc/$PRGNAM-$VERSION/
 cat $CWD/dovecot.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/dovecot.SlackBuild
-
-# Make sure that the docs have the right ownership and permissions.  If
-# built by a mortal user, these permissions will be wrong.
-chown -R root:root $PKG/usr/doc/$PRGNAM-$VERSION
-chmod -R ug+rw,o-w $PKG/usr/doc/$PRGNAM-$VERSION
-
-# Dovecot installs these, but we already copied them above, so bye bye
 rm -rf $PKG/usr/share/doc
 
-# Remove the Makefile.* from the docs directory
-rm -f $PKG/usr/doc/$PRGNAM-$VERSION/Makefile*
+# Put the example files with the documentation
+mv $PKG/etc/dovecot-ldap-example.conf $PKG/etc/dovecot-sql-example.conf \
+   $PKG/usr/doc/$PRGNAM-$VERSION
+
+# Add an init script
+mkdir -p $PKG/etc/rc.d
+install -m 0755 $CWD/rc.dovecot $PKG/etc/rc.d/rc.dovecot.new
 
+mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 cat $CWD/doinst.sh > $PKG/install/doinst.sh
-install -m 0644 $CWD/rc.dovecot $PKG/etc/rc.d/rc.dovecot
-
-# Let's not kill the existing config file (even if it is just an example)
-mv $PKG/etc/dovecot-example.conf $PKG/etc/dovecot-example.conf.new
-# Put the other example files in /usr/doc for the user to consider later.
-mv $PKG/etc/dovecot-ldap-example.conf \
-   $PKG/usr/doc/$PRGNAM-$VERSION/dovecot-ldap-example.conf
-mv $PKG/etc/dovecot-sql-example.conf \
-   $PKG/usr/doc/$PRGNAM-$VERSION/dovecot-sql-example.conf
 
 cd $PKG
 /sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz
diff --git a/network/dovecot/dovecot.info b/network/dovecot/dovecot.info
index 6a3270a3b5..6059a44437 100644
--- a/network/dovecot/dovecot.info
+++ b/network/dovecot/dovecot.info
@@ -1,8 +1,8 @@
 PRGNAM="dovecot"
-VERSION="1.0.3"
+VERSION="1.1.3"
 HOMEPAGE="http://www.dovecot.org/"
-DOWNLOAD="http://dovecot.org/releases/1.0/dovecot-1.0.3.tar.gz"
-MD5SUM="1d7cc3c4964789554553e7e4ea3f82b4"
+DOWNLOAD="http://dovecot.org/releases/1.1/dovecot-1.1.3.tar.gz"
+MD5SUM="103ff0ffb4bcb37f22c27779553e48bc"
 MAINTAINER="Alan Hicks"
 EMAIL="alan@lizella.net"
-APPROVED="Alan Hicks,rworkman"
+APPROVED="rworkman"
diff --git a/network/dovecot/rc.dovecot b/network/dovecot/rc.dovecot
index 700e1bfc4c..228eb2915e 100644
--- a/network/dovecot/rc.dovecot
+++ b/network/dovecot/rc.dovecot
@@ -1,4 +1,5 @@
 #!/bin/bash
+
 # Copyright 2006, Alan Hicks, Lizella, GA
 # All rights reserved.
 #
@@ -18,8 +19,6 @@
 #  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
 
 dovecot_start()
 {
@@ -53,3 +52,4 @@ case $1 in
 *)
   echo "usage $0 start|stop|restart"
 esac
+
diff --git a/network/dovecot/slack-desc b/network/dovecot/slack-desc
index 06a1198db7..be7d99d1a0 100644
--- a/network/dovecot/slack-desc
+++ b/network/dovecot/slack-desc
@@ -15,5 +15,5 @@ dovecot: common pitfalls.
 dovecot: Dovecot can work with standard mbox and Maildir formats and it's
 dovecot: fully compatible with UW-IMAP and Courier IMAP servers'
 dovecot: implementation of them, as well as mail clients accessing the
-dovecot: mailboxes directly
-dovecot: Packaged by Alan Hicks <alan@lizella.net>
+dovecot: mailboxes directly.
+dovecot: