graphics/FreeCAD: Updated for version 0.11.3729.

Signed-off-by: dsomero <xgizzmo@slackbuilds.org>

6 files changed, 90 insertions, 58 deletions

diff --git a/graphics/FreeCAD/FreeCAD.SlackBuild b/graphics/FreeCAD/FreeCAD.SlackBuild
index ad2e5b0c39..75b816f84e 100644
--- a/graphics/FreeCAD/FreeCAD.SlackBuild
+++ b/graphics/FreeCAD/FreeCAD.SlackBuild
@@ -1,22 +1,40 @@
 #!/bin/sh
 
 # Slackware build script for FreeCAD
-# Maintained by Niels Horn <niels.horn@gmail.com>
-# revision date: 2010/05/05
+
+# Copyright 2010-2011 Niels Horn, Rio de Janeiro, RJ, Brazil
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# revision date: 2011/08/10
 
 PRGNAM=FreeCAD
-VERSION=0.9.2646
+VERSION=${VERSION:-0.11.3729}
 BUILD=${BUILD:-1}
 TAG=${TAG:-_SBo}
 
-SRCVERSION=${VERSION}.5
+SRCNAM=freecad
 
-# Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
     i?86) ARCH=i486 ;;
     arm*) ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
        *) ARCH=$( uname -m ) ;;
   esac
 fi
@@ -40,22 +58,22 @@ else
   LIBDIRSUFFIX=""
 fi
 
-set -e	 # Exit on most errors
+set -e
 
 rm -rf $PKG
 mkdir -p $TMP $PKG $OUTPUT
 cd $TMP
 rm -rf $PRGNAM-$VERSION
-tar xvf $CWD/$PRGNAM-$SRCVERSION.tar.gz
+tar xvf $CWD/$SRCNAM-$VERSION.tar.gz
 cd $PRGNAM-$VERSION
 chown -R root:root .
 chmod -R u+w,go+r-w,a-s .
 
-# For newer boost versions (as in Slackware -current since 2009/12/17),
-#  correct names of libs (w/o -mt)
-patch -p1 < $CWD/boost_current.patch
+# Patch for OpenCASCADE-6.5.x
+patch -p1 < $CWD/OpenCASCADE65.patch
 
-./autogen.sh
+# Fix references to old boost_*-mt libs
+sed -i "/-lboost/s/-mt\"/\"/g" configure
 
 CFLAGS="$SLKCFLAGS" \
 CXXFLAGS="$SLKCFLAGS" \
@@ -71,15 +89,15 @@ CXXFLAGS="$SLKCFLAGS" \
   --with-qt4-dir=$QT4DIR \
   --build=$ARCH-slackware-linux
 
-make 
+make
 make install DESTDIR=$PKG
 
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
 
-# Move icon & copy desktop file
+# Copy icon & desktop file
 mkdir -p $PKG/usr/share/{applications,pixmaps}
-mv $PKG/opt/$PRGNAM/share/FCIcon.xpm $PKG/usr/share/pixmaps/
+cp $PKG/opt/$PRGNAM/share/freecad.xpm $PKG/usr/share/pixmaps/
 cat $CWD/$PRGNAM.desktop > $PKG/usr/share/applications/$PRGNAM.desktop
 
 mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
diff --git a/graphics/FreeCAD/FreeCAD.desktop b/graphics/FreeCAD/FreeCAD.desktop
index 34f259a3a5..07d2a8c7fd 100644
--- a/graphics/FreeCAD/FreeCAD.desktop
+++ b/graphics/FreeCAD/FreeCAD.desktop
@@ -5,6 +5,6 @@ Name=FreeCAD
 Comment=General purpose 3D CAD modeler
 Categories=Graphics;
 Exec=/opt/FreeCAD/bin/FreeCAD
-Icon=FCIcon
+Icon=freecad
 Terminal=false
 StartupNotify=false
diff --git a/graphics/FreeCAD/FreeCAD.info b/graphics/FreeCAD/FreeCAD.info
index 2cf0b334ae..c34e180b7b 100644
--- a/graphics/FreeCAD/FreeCAD.info
+++ b/graphics/FreeCAD/FreeCAD.info
@@ -1,10 +1,10 @@
 PRGNAM="FreeCAD"
-VERSION="0.9.2646"
+VERSION="0.11.3729"
 HOMEPAGE="http://free-cad.sourceforge.net/"
-DOWNLOAD="http://downloads.sourceforge.net/free-cad/FreeCAD-0.9.2646.5.tar.gz"
-MD5SUM="a95d59a957c9d205ed7be1e35ad648e9"
+DOWNLOAD="http://downloads.sourceforge.net/free-cad/freecad-0.11.3729.tar.gz"
+MD5SUM="cd68f52ee201c49a83a400b87686b9b9"
 DOWNLOAD_x86_64=""
 MD5SUM_x86_64=""
 MAINTAINER="Niels Horn"
 EMAIL="niels.horn@gmail.com"
-APPROVED="rworkman"
+APPROVED="dsomero"
diff --git a/graphics/FreeCAD/OpenCASCADE65.patch b/graphics/FreeCAD/OpenCASCADE65.patch
new file mode 100644
index 0000000000..8fcc40842e
--- /dev/null
+++ b/graphics/FreeCAD/OpenCASCADE65.patch
@@ -0,0 +1,49 @@
+--- FreeCAD-0.11.3729/src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshEditor.cpp	2010-10-17 05:59:46.000000000 -0200
++++ FreeCAD-0.11.3729_patched/src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshEditor.cpp	2011-08-10 20:04:59.000000000 -0300
+@@ -2205,8 +2205,8 @@
+   if ( projector.IsDone() ) {
+     double u, v, minVal = DBL_MAX;
+     for ( int i = projector.NbExt(); i > 0; i-- )
+-      if ( projector.Value( i ) < minVal ) {
+-        minVal = projector.Value( i );
++      if ( projector.SquareDistance( i ) < minVal ) {
++        minVal = projector.SquareDistance( i );
+         projector.Point( i ).Parameter( u, v );
+       }
+     result.SetCoord( u, v );
+--- FreeCAD-0.11.3729/src/3rdParty/salomesmesh/src/SMESH/SMESH_Pattern.cpp	2010-10-17 05:59:46.000000000 -0200
++++ FreeCAD-0.11.3729_patched/src/3rdParty/salomesmesh/src/SMESH/SMESH_Pattern.cpp	2011-08-10 20:06:21.000000000 -0300
+@@ -436,8 +436,8 @@
+   }
+   double u, v, minVal = DBL_MAX;
+   for ( int i = theProjectorPS.NbExt(); i > 0; i-- )
+-    if ( theProjectorPS.Value( i ) < minVal ) {
+-      minVal = theProjectorPS.Value( i );
++    if ( theProjectorPS.SquareDistance( i ) < minVal ) {
++      minVal = theProjectorPS.SquareDistance( i );
+       theProjectorPS.Point( i ).Parameter( u, v );
+     }
+   return gp_XY( u, v );
+--- FreeCAD-0.11.3729/src/Mod/Part/App/PrimitiveFeature.cpp	2010-08-27 11:22:14.000000000 -0300
++++ FreeCAD-0.11.3729_patched/src/Mod/Part/App/PrimitiveFeature.cpp	2011-08-10 20:41:35.000000000 -0300
+@@ -141,9 +141,6 @@
+     case BRepBuilderAPI_ParametersOutOfRange:

+         error = "parameters out of range";

+         break;

+-    case BRepBuilderAPI_SurfaceNotC2:

+-        error = "surface not C2";

+-        break;

+     default:

+         error = "unknown error";

+         break;

+--- FreeCAD-0.11.3729/src/Mod/Part/App/TopoShape.cpp	2010-11-14 06:53:08.000000000 -0200
++++ FreeCAD-0.11.3729_patched/src/Mod/Part/App/TopoShape.cpp	2011-08-10 20:43:03.000000000 -0300
+@@ -139,8 +139,6 @@
+         return "Curve projection failed";

+     case BRepBuilderAPI_ParametersOutOfRange:

+         return "Parameters out of range";

+-    case BRepBuilderAPI_SurfaceNotC2:

+-        return "Surface not C2-continous";

+     default:

+         return "Unknown creation error";

+     }

diff --git a/graphics/FreeCAD/README b/graphics/FreeCAD/README
index db01eb5112..e824ded5ab 100644
--- a/graphics/FreeCAD/README
+++ b/graphics/FreeCAD/README
@@ -1,5 +1,5 @@
-FreeCAD is a general purpose 3D CAD modeler, aimed at mechanical engineering
-and product design, but also fits in a wider range of uses around engineering,
-such as architecture or other engineering specialties.
+FreeCAD is a general purpose 3D CAD modeler, aimed at mechanical
+engineering and product design, but also fits in a wider range of uses
+around engineering, such as architecture or other engineering specialties.
 
 FreeCAD requires xerces-c, Coin, SoQt, Pivy, and OpenCASCADE.
diff --git a/graphics/FreeCAD/boost_current.patch b/graphics/FreeCAD/boost_current.patch
deleted file mode 100644
index 67f5363254..0000000000
--- a/graphics/FreeCAD/boost_current.patch
+++ /dev/null
@@ -1,35 +0,0 @@
---- FreeCAD-0.9.2646/acinclude.m4	2010-01-07 10:14:08.000000000 -0200
-+++ FreeCAD-0.9.2646_new/acinclude.m4	2010-04-21 13:48:34.000000000 -0300
-@@ -418,7 +418,7 @@
- fc_boost_ac_save_libs=$LIBS
- CPPFLAGS="$CPPFLAGS -I$fc_boost_incs"
- LDFLAGS="$LDFLAGS -L$fc_boost_libs"
--LIBS="-lboost_program_options-mt"
-+LIBS="-lboost_program_options"
- 
- AC_TRY_LINK([#include <boost/program_options.hpp>],
- 	[namespace po = boost::program_options;
-@@ -459,17 +459,17 @@
- AC_MSG_RESULT($ac_cv_boost_system)
- rm -f boost.cpp boost
- 
--BOOST_FILESYSTEM_LIB="-lboost_filesystem-mt"
--BOOST_PROGOPTIONS_LIB="-lboost_program_options-mt"
--BOOST_SIGNALS_LIB="-lboost_signals-mt"
-+BOOST_FILESYSTEM_LIB="-lboost_filesystem"
-+BOOST_PROGOPTIONS_LIB="-lboost_program_options"
-+BOOST_SIGNALS_LIB="-lboost_signals"
- BOOST_SYSTEM_LIB=""
--BOOST_REGEX_LIB="-lboost_regex-mt"
-+BOOST_REGEX_LIB="-lboost_regex"
- if test x"$ac_cv_boost_system" = xyes; then
--    LIBS="-lboost_system-mt"
-+    LIBS="-lboost_system"
-     AC_MSG_CHECKING(for boost system library)
-     AC_TRY_LINK([#include <boost/system/error_code.hpp>],
-         [ boost::system::error_code error_code; std::string message(error_code.message()); return 0; ],
--        [BOOST_SYSTEM_LIB="-lboost_system-mt"],
-+        [BOOST_SYSTEM_LIB="-lboost_system"],
-         [BOOST_SYSTEM_LIB=""])
-     
-     if test "x$BOOST_SYSTEM_LIB" = "x"; then