development/sonarqube: Added (quality management platform).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

6 files changed, 755 insertions, 0 deletions

diff --git a/development/sonarqube/README b/development/sonarqube/README
new file mode 100644
index 0000000000..975531b82e
--- /dev/null
+++ b/development/sonarqube/README
@@ -0,0 +1,17 @@
+SonarQube software (previously called Sonar) is an open source quality 
+management platform, dedicated to continuously analyze and measure technical 
+quality, from project portfolio to method.
+
+To create the MariaDB SonarQube database run:
+CREATE DATABASE sonar CHARACTER SET utf8 COLLATE utf8_general_ci;
+CREATE USER 'sonar' IDENTIFIED BY 'sonar';
+GRANT ALL ON sonar.* TO 'sonar'@'%' IDENTIFIED BY 'sonar';
+GRANT ALL ON sonar.* TO 'sonar'@'localhost' IDENTIFIED BY 'sonar';
+FLUSH PRIVILEGES;
+Then start the service
+/etc/rc.d/rc.sonarqube start
+Then point your browser to
+http://localhost:9000/sonarqube/
+Then login as:
+user: admin 
+password: admin
diff --git a/development/sonarqube/doinst.sh b/development/sonarqube/doinst.sh
new file mode 100644
index 0000000000..999f782e38
--- /dev/null
+++ b/development/sonarqube/doinst.sh
@@ -0,0 +1,24 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    rm $NEW
+  fi
+}
+
+preserve_perms() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  if [ -e $OLD ]; then
+    cp -a $OLD ${NEW}.incoming
+    cat $NEW > ${NEW}.incoming
+    mv ${NEW}.incoming $NEW
+  fi
+  config $NEW
+}
+
+preserve_perms etc/rc.d/rc.sonarqube.new
+config usr/share/sonarqube/conf/sonar.properties.new
+config usr/share/sonarqube/conf/wrapper.conf.new
diff --git a/development/sonarqube/rc.sonarqube b/development/sonarqube/rc.sonarqube
new file mode 100644
index 0000000000..fa31ee7ecc
--- /dev/null
+++ b/development/sonarqube/rc.sonarqube
@@ -0,0 +1,564 @@
+#! /bin/sh
+
+#
+# Copyright (c) 1999, 2006 Tanuki Software Inc.
+#
+# Java Service Wrapper sh script.  Suitable for starting and stopping
+#  wrapped Java applications on UNIX platforms.
+#
+
+#-----------------------------------------------------------------------------
+# These settings can be modified to fit the needs of your application
+
+# Default values for the Application variables, below. 
+# 
+# NOTE: The build for specific applications may override this during the resource-copying
+# phase, to fill in a concrete name and avoid the use of the defaults specified here.
+DEF_APP_NAME="SonarQube"
+DEF_APP_LONG_NAME="SonarQube"
+
+# Application
+APP_NAME="${DEF_APP_NAME}"
+APP_LONG_NAME="${DEF_APP_LONG_NAME}"
+
+# Wrapper
+WRAPPER_CMD="./wrapper"
+WRAPPER_CONF="/etc/sonarqube/wrapper.conf"
+
+# Priority at which to run the wrapper.  See "man nice" for valid priorities.
+#  nice is only used if a priority is specified.
+PRIORITY=
+
+# Location of the pid file.
+PIDDIR="/var/run/sonarqube"
+
+# If uncommented, causes the Wrapper to be shutdown using an anchor file.
+#  When launched with the 'start' command, it will also ignore all INT and
+#  TERM signals.
+#IGNORE_SIGNALS=true
+
+# If specified, the Wrapper will be run as the specified user.
+# IMPORTANT - Make sure that the user has the required privileges to write
+#  the PID file and wrapper.log files.  Failure to be able to write the log
+#  file will cause the Wrapper to exit without any way to write out an error
+#  message.
+# NOTE - This will set the user which is used to run the Wrapper as well as
+#  the JVM and is not useful in situations where a privileged resource or
+#  port needs to be allocated prior to the user being changed.
+RUN_AS_USER=sonar
+
+# The following two lines are used by the chkconfig command. Change as is
+#  appropriate for your application.  They should remain commented.
+# chkconfig: 2345 20 80
+# description: Test Wrapper Sample Application
+
+# Do not modify anything beyond this point
+#-----------------------------------------------------------------------------
+
+# Get the fully qualified path to the script
+case $0 in
+    /*)
+        SCRIPT="$0"
+        ;;
+    *)
+        PWD=`pwd`
+        SCRIPT="$PWD/$0"
+        ;;
+esac
+
+# Resolve the true real path without any sym links.
+CHANGED=true
+while [ "X$CHANGED" != "X" ]
+do
+    # Change spaces to ":" so the tokens can be parsed.
+    SAFESCRIPT=`echo $SCRIPT | sed -e 's; ;:;g'`
+    # Get the real path to this script, resolving any symbolic links
+    TOKENS=`echo $SAFESCRIPT | sed -e 's;/; ;g'`
+    REALPATH=
+    for C in $TOKENS; do
+        # Change any ":" in the token back to a space.
+        C=`echo $C | sed -e 's;:; ;g'`
+        REALPATH="$REALPATH/$C"
+        # If REALPATH is a sym link, resolve it.  Loop for nested links.
+        while [ -h "$REALPATH" ] ; do
+            LS="`ls -ld "$REALPATH"`"
+            LINK="`expr "$LS" : '.*-> \(.*\)$'`"
+            if expr "$LINK" : '/.*' > /dev/null; then
+                # LINK is absolute.
+                REALPATH="$LINK"
+            else
+                # LINK is relative.
+                REALPATH="`dirname "$REALPATH"`""/$LINK"
+            fi
+        done
+    done
+
+    if [ "$REALPATH" = "$SCRIPT" ]
+    then
+        CHANGED=""
+    else
+        SCRIPT="$REALPATH"
+    fi
+done
+
+# Change the current directory to the location of the script
+cd "`dirname "$REALPATH"`"
+REALDIR=`pwd`
+
+# If the PIDDIR is relative, set its value relative to the full REALPATH to avoid problems if
+#  the working directory is later changed.
+FIRST_CHAR=`echo $PIDDIR | cut -c1,1`
+if [ "$FIRST_CHAR" != "/" ]
+then
+    PIDDIR=$REALDIR/$PIDDIR
+fi
+# Same test for WRAPPER_CMD
+FIRST_CHAR=`echo $WRAPPER_CMD | cut -c1,1`
+if [ "$FIRST_CHAR" != "/" ]
+then
+    WRAPPER_CMD=$REALDIR/$WRAPPER_CMD
+fi
+# Same test for WRAPPER_CONF
+FIRST_CHAR=`echo $WRAPPER_CONF | cut -c1,1`
+if [ "$FIRST_CHAR" != "/" ]
+then
+    WRAPPER_CONF=$REALDIR/$WRAPPER_CONF
+fi
+
+# Process ID
+ANCHORFILE="$PIDDIR/$APP_NAME.anchor"
+PIDFILE="$PIDDIR/$APP_NAME.pid"
+LOCKDIR="/var/lock/subsys"
+LOCKFILE="$LOCKDIR/$APP_NAME"
+pid=""
+
+# Resolve the location of the 'ps' command
+PSEXE="/usr/bin/ps"
+if [ ! -x "$PSEXE" ]
+then
+    PSEXE="/bin/ps"
+    if [ ! -x "$PSEXE" ]
+    then
+        echo "Unable to locate 'ps'."
+        echo "Please report this message along with the location of the command on your system."
+        exit 1
+    fi
+fi
+
+# Resolve the os
+DIST_OS=`uname -s | tr [:upper:] [:lower:] | tr -d [:blank:]`
+case "$DIST_OS" in
+    'sunos')
+        DIST_OS="solaris"
+        ;;
+    'hp-ux' | 'hp-ux64')
+        DIST_OS="hpux"
+        ;;
+    'darwin')
+        DIST_OS="macosx"
+        ;;
+    'unix_sv')
+        DIST_OS="unixware"
+        ;;
+esac
+
+# Resolve the architecture
+DIST_ARCH=`uname -p | tr [:upper:] [:lower:] | tr -d [:blank:]`
+if [ "$DIST_ARCH" = "unknown" ]
+then
+    DIST_ARCH=`uname -m | tr [:upper:] [:lower:] | tr -d [:blank:]`
+fi
+case "$DIST_ARCH" in
+    'amd64' | 'athlon' | 'ia32' | 'ia64' | 'i386' | 'i486' | 'i586' | 'i686' | 'x86_64')
+        DIST_ARCH="x86"
+        ;;
+    'ip27')
+        DIST_ARCH="mips"
+        ;;
+    'power' | 'powerpc' | 'power_pc' | 'ppc64')
+        DIST_ARCH="ppc"
+        ;;
+    'pa_risc' | 'pa-risc')
+        DIST_ARCH="parisc"
+        ;;
+    'sun4u' | 'sparcv9')
+        DIST_ARCH="sparc"
+        ;;
+    '9000/800')
+        DIST_ARCH="parisc"
+        ;;
+esac
+
+outputFile() {
+    if [ -f "$1" ]
+    then
+        echo "  $1 (Found but not executable.)";
+    else
+        echo "  $1"
+    fi
+}
+
+# Decide on the wrapper binary to use.
+# If a 32-bit wrapper binary exists then it will work on 32 or 64 bit
+#  platforms, if the 64-bit binary exists then the distribution most
+#  likely wants to use long names.  Otherwise, look for the default.
+# For macosx, we also want to look for universal binaries.
+WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32"
+if [ -x "$WRAPPER_TEST_CMD" ]
+then
+    WRAPPER_CMD="$WRAPPER_TEST_CMD"
+else
+    if [ "$DIST_OS" = "macosx" ]
+    then
+        WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-universal-32"
+        if [ -x "$WRAPPER_TEST_CMD" ]
+        then
+            WRAPPER_CMD="$WRAPPER_TEST_CMD"
+        else
+            WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
+            if [ -x "$WRAPPER_TEST_CMD" ]
+            then
+                WRAPPER_CMD="$WRAPPER_TEST_CMD"
+            else
+                WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-universal-64"
+                if [ -x "$WRAPPER_TEST_CMD" ]
+                then
+                    WRAPPER_CMD="$WRAPPER_TEST_CMD"
+                else
+                    if [ ! -x "$WRAPPER_CMD" ]
+                    then
+                        echo "Unable to locate any of the following binaries:"
+                        outputFile "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32"
+                        outputFile "$WRAPPER_CMD-$DIST_OS-universal-32"
+                        outputFile "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
+                        outputFile "$WRAPPER_CMD-$DIST_OS-universal-64"
+                        outputFile "$WRAPPER_CMD"
+                        exit 1
+                    fi
+                fi
+            fi
+        fi
+    else
+        WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
+        if [ -x "$WRAPPER_TEST_CMD" ]
+        then
+            WRAPPER_CMD="$WRAPPER_TEST_CMD"
+        else
+            if [ ! -x "$WRAPPER_CMD" ]
+            then
+                echo "Unable to locate any of the following binaries:"
+                outputFile "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32"
+                outputFile "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
+                outputFile "$WRAPPER_CMD"
+                exit 1
+            fi
+        fi
+    fi
+fi
+
+# Build the nice clause
+if [ "X$PRIORITY" = "X" ]
+then
+    CMDNICE=""
+else
+    CMDNICE="nice -$PRIORITY"
+fi
+
+# Build the anchor file clause.
+if [ "X$IGNORE_SIGNALS" = "X" ]
+then
+   ANCHORPROP=
+   IGNOREPROP=
+else
+   ANCHORPROP=wrapper.anchorfile=\"$ANCHORFILE\"
+   IGNOREPROP=wrapper.ignore_signals=TRUE
+fi
+
+# Build the lock file clause.  Only create a lock file if the lock directory exists on this platform.
+LOCKPROP=
+if [ -d $LOCKDIR ]
+then
+    if [ -w $LOCKDIR ]
+    then
+        LOCKPROP=wrapper.lockfile=\"$LOCKFILE\"
+    fi
+fi
+
+checkUser() {
+    # $1 touchLock flag
+    # $2 command
+
+    # Check the configured user.  If necessary rerun this script as the desired user.
+    if [ "X$RUN_AS_USER" != "X" ]
+    then
+        # Resolve the location of the 'id' command
+        IDEXE="/usr/xpg4/bin/id"
+        if [ ! -x "$IDEXE" ]
+        then
+            IDEXE="/usr/bin/id"
+            if [ ! -x "$IDEXE" ]
+            then
+                echo "Unable to locate 'id'."
+                echo "Please report this message along with the location of the command on your system."
+                exit 1
+            fi
+        fi
+    
+        if [ "`$IDEXE -u -n`" = "$RUN_AS_USER" ]
+        then
+            # Already running as the configured user.  Avoid password prompts by not calling su.
+            RUN_AS_USER=""
+        fi
+    fi
+    if [ "X$RUN_AS_USER" != "X" ]
+    then
+        # If LOCKPROP and $RUN_AS_USER are defined then the new user will most likely not be
+        # able to create the lock file.  The Wrapper will be able to update this file once it
+        # is created but will not be able to delete it on shutdown.  If $2 is defined then
+        # the lock file should be created for the current command
+        if [ "X$LOCKPROP" != "X" ]
+        then
+            if [ "X$1" != "X" ]
+            then
+                # Resolve the primary group 
+                RUN_AS_GROUP=`groups $RUN_AS_USER | awk '{print $3}' | tail -1`
+                if [ "X$RUN_AS_GROUP" = "X" ]
+                then
+                    RUN_AS_GROUP=$RUN_AS_USER
+                fi
+                touch $LOCKFILE
+                chown $RUN_AS_USER:$RUN_AS_GROUP $LOCKFILE
+            fi
+        fi
+
+        # Still want to change users, recurse.  This means that the user will only be
+        #  prompted for a password once. Variables shifted by 1
+        su -m $RUN_AS_USER -c "\"$REALPATH\" $2"
+        RETVAL=$?
+
+        # Now that we are the original user again, we may need to clean up the lock file.
+        if [ "X$LOCKPROP" != "X" ]
+        then
+            getpid
+            if [ "X$pid" = "X" ]
+            then
+                # Wrapper is not running so make sure the lock file is deleted.
+                if [ -f "$LOCKFILE" ]
+                then
+                    rm "$LOCKFILE"
+                fi
+            fi
+        fi
+
+        exit $RETVAL
+    fi
+}
+
+getpid() {
+    if [ -f "$PIDFILE" ]
+    then
+        if [ -r "$PIDFILE" ]
+        then
+            pid=`cat "$PIDFILE"`
+            if [ "X$pid" != "X" ]
+            then
+                # It is possible that 'a' process with the pid exists but that it is not the
+                #  correct process.  This can happen in a number of cases, but the most
+                #  common is during system startup after an unclean shutdown.
+                # The ps statement below looks for the specific wrapper command running as
+                #  the pid.  If it is not found then the pid file is considered to be stale.
+                pidtest=`$PSEXE -p $pid -o args | grep "$WRAPPER_CMD" | tail -1`
+                if [ "X$pidtest" = "X" ]
+                then
+                    # This is a stale pid file.
+                    rm -f "$PIDFILE"
+                    echo "Removed stale pid file: $PIDFILE"
+                    pid=""
+                fi
+            fi
+        else
+            echo "Cannot read $PIDFILE."
+            exit 1
+        fi
+    fi
+}
+
+testpid() {
+    pid=`$PSEXE -p $pid | grep $pid | grep -v grep | awk '{print $1}' | tail -1`
+    if [ "X$pid" = "X" ]
+    then
+        # Process is gone so remove the pid file.
+        rm -f "$PIDFILE"
+        pid=""
+    fi
+}
+
+console() {
+    echo "Running $APP_LONG_NAME..."
+    getpid
+    if [ "X$pid" = "X" ]
+    then
+        # The string passed to eval must handles spaces in paths correctly.
+        COMMAND_LINE="$CMDNICE \"$WRAPPER_CMD\" \"$WRAPPER_CONF\" wrapper.syslog.ident=$APP_NAME wrapper.pidfile=\"$PIDFILE\" $ANCHORPROP $LOCKPROP"
+        eval $COMMAND_LINE
+    else
+        echo "$APP_LONG_NAME is already running."
+        exit 1
+    fi
+}
+ 
+start() {
+    echo "Starting $APP_LONG_NAME..."
+    getpid
+    if [ "X$pid" = "X" ]
+    then
+        # The string passed to eval must handles spaces in paths correctly.
+        COMMAND_LINE="$CMDNICE \"$WRAPPER_CMD\" \"$WRAPPER_CONF\" wrapper.syslog.ident=$APP_NAME wrapper.pidfile=\"$PIDFILE\" wrapper.daemonize=TRUE $ANCHORPROP $IGNOREPROP $LOCKPROP"
+        eval $COMMAND_LINE
+    else
+        echo "$APP_LONG_NAME is already running."
+        exit 1
+    fi
+    getpid
+    if [ "X$pid" != "X" ]
+    then
+        echo "Started $APP_LONG_NAME."
+    else
+        echo "Failed to start $APP_LONG_NAME."
+    fi    
+}
+ 
+stopit() {
+    echo "Stopping $APP_LONG_NAME..."
+    getpid
+    if [ "X$pid" = "X" ]
+    then
+        echo "$APP_LONG_NAME was not running."
+    else
+        if [ "X$IGNORE_SIGNALS" = "X" ]
+        then
+            # Running so try to stop it.
+            kill $pid
+            if [ $? -ne 0 ]
+            then
+                # An explanation for the failure should have been given
+                echo "Unable to stop $APP_LONG_NAME."
+                exit 1
+            fi
+        else
+            rm -f "$ANCHORFILE"
+            if [ -f "$ANCHORFILE" ]
+            then
+                # An explanation for the failure should have been given
+                echo "Unable to stop $APP_LONG_NAME."
+                exit 1
+            fi
+        fi
+
+        # We can not predict how long it will take for the wrapper to
+        #  actually stop as it depends on settings in wrapper.conf.
+        #  Loop until it does.
+        savepid=$pid
+        CNT=0
+        TOTCNT=0
+        while [ "X$pid" != "X" ]
+        do
+            # Show a waiting message every 5 seconds.
+            if [ "$CNT" -lt "5" ]
+            then
+                CNT=`expr $CNT + 1`
+            else
+                echo "Waiting for $APP_LONG_NAME to exit..."
+                CNT=0
+            fi
+            TOTCNT=`expr $TOTCNT + 1`
+
+            sleep 1
+
+            testpid
+        done
+
+        pid=$savepid
+        testpid
+        if [ "X$pid" != "X" ]
+        then
+            echo "Failed to stop $APP_LONG_NAME."
+            exit 1
+        else
+            echo "Stopped $APP_LONG_NAME."
+        fi
+    fi
+}
+
+status() {
+    getpid
+    if [ "X$pid" = "X" ]
+    then
+        echo "$APP_LONG_NAME is not running."
+        exit 1
+    else
+        echo "$APP_LONG_NAME is running ($pid)."
+        exit 0
+    fi
+}
+
+dump() {
+    echo "Dumping $APP_LONG_NAME..."
+    getpid
+    if [ "X$pid" = "X" ]
+    then
+        echo "$APP_LONG_NAME was not running."
+
+    else
+        kill -3 $pid
+
+        if [ $? -ne 0 ]
+        then
+            echo "Failed to dump $APP_LONG_NAME."
+            exit 1
+        else
+            echo "Dumped $APP_LONG_NAME."
+        fi
+    fi
+}
+
+case "$1" in
+
+    'console')
+        checkUser touchlock $1
+        console
+        ;;
+
+    'start')
+        checkUser touchlock $1
+        start
+        ;;
+
+    'stop')
+        checkUser "" $1
+        stopit
+        ;;
+
+    'restart')
+        checkUser touchlock $1
+        stopit
+        start
+        ;;
+
+    'status')
+        checkUser "" $1
+        status
+        ;;
+
+    'dump')
+        checkUser "" $1
+        dump
+        ;;
+
+    *)
+        echo "Usage: $0 { console | start | stop | restart | status | dump }"
+        exit 1
+        ;;
+esac
+
+exit 0
diff --git a/development/sonarqube/slack-desc b/development/sonarqube/slack-desc
new file mode 100644
index 0000000000..ffa8efb06a
--- /dev/null
+++ b/development/sonarqube/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+         |-----handy-ruler------------------------------------------------------|
+sonarqube: SonarQube  (quality management platform)
+sonarqube:
+sonarqube: SonarQube software (previously called Sonar) is an open source
+sonarqube: quality management platform, dedicated to continuously analyze and
+sonarqube: measure technical quality, from project portfolio to method.
+sonarqube:
+sonarqube:
+sonarqube:
+sonarqube: Homepage: http://www.sonarqube.org/
+sonarqube:
+sonarqube:
diff --git a/development/sonarqube/sonarqube.SlackBuild b/development/sonarqube/sonarqube.SlackBuild
new file mode 100644
index 0000000000..7923e2ae05
--- /dev/null
+++ b/development/sonarqube/sonarqube.SlackBuild
@@ -0,0 +1,121 @@
+#!/bin/sh
+# Slackware build script for sonarqube
+
+# Copyright 2014  Giorgio Peron giorgio.peron@gmail.com Campodarsego, PD, Italy 
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=sonarqube
+VERSION=${VERSION:-4.3.2}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+bailout() {
+  printf "\nThis requires a \"sonar\" user and group.\n"
+  printf "\tgroupadd -g 287 sonar\n"
+  printf "\tuseradd -g 287 -u 287 -r -c 'SonarQube user' -s /bin/bash -d /usr/share/sonarqube sonar\n\n"
+  exit 1
+}
+
+if ! getent group sonar 2>/dev/null 1>/dev/null ; then
+  bailout
+elif ! getent passwd sonar 2>/dev/null 1>/dev/null ; then
+  bailout
+fi
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+  BINDIR="linux-x86-32"
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+  BINDIR="linux-x86-32"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+  BINDIR="linux-x86-64"
+else
+  SLKCFLAGS="-O2"
+  BINDIR=""
+fi
+
+set -e
+
+rm -rf $PKG $TMP/$PRGNAM-$VERSION
+mkdir -p $PKG $OUTPUT
+cd $TMP
+
+unzip $CWD/$PRGNAM-$VERSION.zip
+
+mkdir -p $PKG/usr/share/$PRGNAM
+mkdir -p $PKG/var/{log,run,tmp}/$PRGNAM
+mkdir -p $PKG/etc/rc.d
+
+mv $TMP/$PRGNAM-$VERSION/* $PKG/usr/share/$PRGNAM/
+
+# expose the configuration file under /etc
+mv $PKG/usr/share/$PRGNAM/conf/sonar.properties{,.new}
+mv $PKG/usr/share/$PRGNAM/conf/wrapper.conf{,.new}
+cd $PKG/etc
+ln -sf ../usr/share/$PRGNAM/conf $PRGNAM
+
+sed -i "s_sonar.jdbc.url=jdbc:h2:_#sonar.jdbc.url=jdbc:h2:_g" $PKG/usr/share/$PRGNAM/conf/sonar.properties.new
+sed -i "s_#sonar.jdbc.url=jdbc:mysql:_sonar.jdbc.url=jdbc:mysql:_g" $PKG/usr/share/$PRGNAM/conf/sonar.properties.new
+sed -i "s_#sonar.web.context=_sonar.web.context=/sonarqube_g" $PKG/usr/share/$PRGNAM/conf/sonar.properties.new
+sed -i "s_wrapper.java.command=java_wrapper.java.command=/usr/lib${LIBDIRSUFFIX}/java/bin/java_g" $PKG/usr/share/$PRGNAM/conf/wrapper.conf.new
+
+chown -R sonar:sonar $PKG/usr/share/$PRGNAM
+chown -R sonar:sonar $PKG/var/{log,run,tmp}/$PRGNAM
+
+rm -rf $PKG/usr/share/$PRGNAM/logs
+rm -rf $PKG/usr/share/$PRGNAM/temp
+cd $PKG/usr/share/$PRGNAM
+ln -fs ../../../var/log/$PRGNAM logs
+ln -fs ../../../var/tmp/$PRGNAM temp
+
+# remove the executables for the others platforms
+cd $PKG/usr/share/$PRGNAM/bin
+find . -type d -not -name ${BINDIR} -not -name "." -not -name "lib" | xargs rm -rf
+
+cat $CWD/rc.$PRGNAM > $PKG/etc/rc.d/rc.$PRGNAM.new
+sed -i "s:WRAPPER_CMD=\"./wrapper\":WRAPPER_CMD=\"/usr/share/sonarqube/bin/${BINDIR}/wrapper\":g" $PKG/etc/rc.d/rc.$PRGNAM.new
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -c n -l y $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/development/sonarqube/sonarqube.info b/development/sonarqube/sonarqube.info
new file mode 100644
index 0000000000..48940a20ab
--- /dev/null
+++ b/development/sonarqube/sonarqube.info
@@ -0,0 +1,10 @@
+PRGNAM="sonarqube"
+VERSION="4.3.2"
+HOMEPAGE="http://www.sonarqube.org"
+DOWNLOAD="http://dist.sonar.codehaus.org/sonarqube-4.3.2.zip"
+MD5SUM="2085e8ce11e0c941dc4451ec808c4169"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES="jdk"
+MAINTAINER="Giorgio Peron"
+EMAIL="giorgio.peron@gmail.com"