development/nexus: Updated for version 2.5.0_04.

Note that this commit is actually broken due to VERSION
having a "-" in it.  The next commit will fix that.

Signed-off-by: Robby Workman <rworkman@slackbuilds.org>

5 files changed, 19 insertions, 706 deletions

diff --git a/development/nexus/files/nexus.properties b/development/nexus/files/nexus.properties
deleted file mode 100644
index 49dcebef1a..0000000000
--- a/development/nexus/files/nexus.properties
+++ /dev/null
@@ -1,14 +0,0 @@
-# Sonatype Nexus
-# ==============
-# This is the most basic configuration of Nexus.
-
-# Jetty section
-application-port=8081
-application-host=0.0.0.0
-nexus-webapp=${bundleBasedir}/nexus
-nexus-webapp-context-path=/nexus
-
-# Nexus section
-nexus-work=/var/lib/nexus
-runtime=${bundleBasedir}/nexus/WEB-INF
- 
diff --git a/development/nexus/files/rc.nexus b/development/nexus/files/rc.nexus
deleted file mode 100644
index 5eb81d8feb..0000000000
--- a/development/nexus/files/rc.nexus
+++ /dev/null
@@ -1,517 +0,0 @@
-#! /bin/sh
-
-#
-# Copyright (c) 1999, 2006 Tanuki Software Inc.
-#
-# Java Service Wrapper sh script.  Suitable for starting and stopping
-#  wrapped Java applications on UNIX platforms.
-#
-
-#-----------------------------------------------------------------------------
-# These settings can be modified to fit the needs of your application
-
-# If specified, the Wrapper will be run as the specified user.
-
-# IMPORTANT - Make sure that the user has the required privileges to write into the Nexus installation directory.
-
-# NOTE - This will set the user which is used to run the Wrapper as well as
-#  the JVM and is not useful in situations where a privileged resource or
-#  port needs to be allocated prior to the user being changed.
-RUN_AS_USER=nexus
-
-# Application
-APP_NAME="nexus"
-APP_LONG_NAME="Nexus OSS"
-
-# Wrapper
-WRAPPER_CMD="/usr/share/nexus/bin/jsw/@NEXUS_ARCH@/wrapper"
-WRAPPER_CONF="/usr/share/nexus/bin/jsw/conf/wrapper.conf"
-
-# Priority at which to run the wrapper.  See "man nice" for valid priorities.
-#  nice is only used if a priority is specified.
-PRIORITY=
-
-# Location of the pid file.
-PIDDIR="/var/run/nexus"
-
-# If uncommented, causes the Wrapper to be shutdown using an anchor file.
-#  When launched with the 'start' command, it will also ignore all INT and
-#  TERM signals.
-#IGNORE_SIGNALS=true
-
-# The following two lines are used by the chkconfig command. Change as is
-#  appropriate for your application.  They should remain commented.
-# chkconfig: 2345 20 80
-# description: Test Wrapper Sample Application
-
-# Do not modify anything beyond this point
-#-----------------------------------------------------------------------------
-
-# Get the fully qualified path to the script
-case $0 in
-    /*)
-        SCRIPT="$0"
-        ;;
-    *)
-        PWD=`pwd`
-        SCRIPT="$PWD/$0"
-        ;;
-esac
-
-# Resolve the true real path without any sym links.
-CHANGED=true
-while [ "X$CHANGED" != "X" ]
-do
-    # Change spaces to ":" so the tokens can be parsed.
-    SAFESCRIPT=`echo $SCRIPT | sed -e 's; ;:;g'`
-    # Get the real path to this script, resolving any symbolic links
-    TOKENS=`echo $SAFESCRIPT | sed -e 's;/; ;g'`
-    REALPATH=
-    for C in $TOKENS; do
-        # Change any ":" in the token back to a space.
-        C=`echo $C | sed -e 's;:; ;g'`
-        REALPATH="$REALPATH/$C"
-        # If REALPATH is a sym link, resolve it.  Loop for nested links.
-        while [ -h "$REALPATH" ] ; do
-            LS="`ls -ld "$REALPATH"`"
-            LINK="`expr "$LS" : '.*-> \(.*\)$'`"
-            if expr "$LINK" : '/.*' > /dev/null; then
-                # LINK is absolute.
-                REALPATH="$LINK"
-            else
-                # LINK is relative.
-                REALPATH="`dirname "$REALPATH"`""/$LINK"
-            fi
-        done
-    done
-
-    if [ "$REALPATH" = "$SCRIPT" ]
-    then
-        CHANGED=""
-    else
-        SCRIPT="$REALPATH"
-    fi
-done
-
-# Change the current directory to the location of the script
-cd "`dirname "$REALPATH"`"
-REALDIR=`pwd`
-
-# Resolve the location of the 'ps' command
-PSEXE="/usr/bin/ps"
-if [ ! -x "$PSEXE" ]
-then
-    PSEXE="/bin/ps"
-    if [ ! -x "$PSEXE" ]
-    then
-        echo "Unable to locate 'ps'."
-        echo "Please report this message along with the location of the command on your system."
-        exit 1
-    fi
-fi
-
-# Resolve the os
-DIST_OS=`uname -s | tr [:upper:] [:lower:] | tr -d [:blank:]`
-case "$DIST_OS" in
-    'sunos')
-        DIST_OS="solaris"
-        ;;
-    'hp-ux' | 'hp-ux64')
-        DIST_OS="hpux"
-        ;;
-    'darwin')
-        DIST_OS="macosx"
-        ;;
-    'unix_sv')
-        DIST_OS="unixware"
-        ;;
-esac
-
-# Resolve the architecture
-DIST_ARCH=`uname -p | tr [:upper:] [:lower:] | tr -d [:blank:]`
-if [ "$DIST_ARCH" = "unknown" ]
-then
-    DIST_ARCH=`uname -m | tr [:upper:] [:lower:] | tr -d [:blank:]`
-fi
-case "$DIST_ARCH" in
-    'amd64' | 'athlon' | 'ia32' | 'ia64' | 'i386' | 'i486' | 'i586' | 'i686' | 'x86_64')
-        DIST_ARCH="x86"
-        ;;
-    'ip27')
-        DIST_ARCH="mips"
-        ;;
-    'power' | 'powerpc' | 'power_pc' | 'ppc64')
-        DIST_ARCH="ppc"
-        ;;
-    'pa_risc' | 'pa-risc')
-        DIST_ARCH="parisc"
-        ;;
-    'sun4u' | 'sparcv9')
-        DIST_ARCH="sparc"
-        ;;
-    '9000/800')
-        DIST_ARCH="parisc"
-        ;;
-esac
-
-outputFile() {
-    if [ -f "$1" ]
-    then
-        echo "  $1 (Found but not executable.)";
-    else
-        echo "  $1"
-    fi
-}
-
-# Default PIDDIR to current directory
-if [ "X$PIDDIR" = "X" ]
-then
-    PIDDIR="."
-fi
-
-# If the PIDDIR is relative, set its value relative to the full REALPATH to avoid problems if
-#  the working directory is later changed.
-FIRST_CHAR=`echo $PIDDIR | cut -c1,1`
-if [ "$FIRST_CHAR" != "/" ]
-then
-    PIDDIR=$REALDIR/$PIDDIR
-fi
-# Same test for WRAPPER_CMD
-FIRST_CHAR=`echo $WRAPPER_CMD | cut -c1,1`
-if [ "$FIRST_CHAR" != "/" ]
-then
-    WRAPPER_CMD=$REALDIR/$WRAPPER_CMD
-fi
-# Same test for WRAPPER_CONF
-FIRST_CHAR=`echo $WRAPPER_CONF | cut -c1,1`
-if [ "$FIRST_CHAR" != "/" ]
-then
-    WRAPPER_CONF=$REALDIR/$WRAPPER_CONF
-fi
-
-# Process ID
-ANCHORFILE="$PIDDIR/$APP_NAME.anchor"
-PIDFILE="$PIDDIR/$APP_NAME.pid"
-LOCKDIR="/var/lock/subsys"
-LOCKFILE="$LOCKDIR/$APP_NAME"
-pid=""
-
-if [ ! -x "$WRAPPER_CMD" ]; then
-    echo "Missing platform binary: $WRAPPER_CMD"
-    exit 1
-fi
-
-# Build the nice clause
-if [ "X$PRIORITY" = "X" ]
-then
-    CMDNICE=""
-else
-    CMDNICE="nice -$PRIORITY"
-fi
-
-# Build the anchor file clause.
-if [ "X$IGNORE_SIGNALS" = "X" ]
-then
-   ANCHORPROP=
-   IGNOREPROP=
-else
-   ANCHORPROP=wrapper.anchorfile=\"$ANCHORFILE\"
-   IGNOREPROP=wrapper.ignore_signals=TRUE
-fi
-
-# Build the lock file clause.  Only create a lock file if the lock directory exists on this platform.
-LOCKPROP=
-if [ -d $LOCKDIR ]
-then
-    if [ -w $LOCKDIR ]
-    then
-        LOCKPROP=wrapper.lockfile=\"$LOCKFILE\"
-    fi
-fi
-
-checkUser() {
-    # $1 touchLock flag
-    # $2 command
-
-    # Resolve the location of the 'id' command
-    IDEXE="/usr/xpg4/bin/id"
-    if [ ! -x "$IDEXE" ]
-    then
-        IDEXE="/usr/bin/id"
-        if [ ! -x "$IDEXE" ]
-        then
-            echo "Unable to locate 'id'."
-            echo "Please report this message along with the location of the command on your system."
-            exit 1
-        fi
-    fi
-
-    # Check the configured user.  If necessary rerun this script as the desired user.
-    if [ "X$RUN_AS_USER" != "X" ]
-    then
-        if [ "`$IDEXE -u -n`" != "$RUN_AS_USER" ]
-        then
-            # If LOCKPROP and $RUN_AS_USER are defined then the new user will most likely not be
-            # able to create the lock file.  The Wrapper will be able to update this file once it
-            # is created but will not be able to delete it on shutdown.  If $2 is defined then
-            # the lock file should be created for the current command
-            if [ "X$LOCKPROP" != "X" ]
-            then
-                if [ "X$1" != "X" ]
-                then
-                    # Resolve the primary group 
-                    RUN_AS_GROUP=`groups $RUN_AS_USER | awk '{print $3}' | tail -1`
-                    if [ "X$RUN_AS_GROUP" = "X" ]
-                    then
-                        RUN_AS_GROUP=$RUN_AS_USER
-                    fi
-                    touch $LOCKFILE
-                    chown $RUN_AS_USER:$RUN_AS_GROUP $LOCKFILE
-                fi
-            fi
-    
-            # Still want to change users, recurse.  This means that the user will only be
-            #  prompted for a password once. Variables shifted by 1
-            su -m $RUN_AS_USER -c "\"$REALPATH\" $2"
-    
-            # Now that we are the original user again, we may need to clean up the lock file.
-            if [ "X$LOCKPROP" != "X" ]
-            then
-                getpid
-                if [ "X$pid" = "X" ]
-                then
-                    # Wrapper is not running so make sure the lock file is deleted.
-                    if [ -f "$LOCKFILE" ]
-                    then
-                        rm "$LOCKFILE"
-                    fi
-                fi
-            fi
-    
-            exit 0
-        fi
-    fi
-
-    # Check that script is not run as root
-    LUID=`$IDEXE -u`
-    if [ $LUID -eq 0 ]
-    then
-        echo "****************************************"
-        echo "WARNING - NOT RECOMMENDED TO RUN AS ROOT"
-        echo "****************************************"
-        if [ ! "`$IDEXE -u -n`" = "$RUN_AS_USER" ]
-        then
-            echo "If you insist running as root, then set the environment variable RUN_AS_USER=root before running this script."
-            exit 1
-        fi
-    fi
-}
-
-getpid() {
-    if [ -f "$PIDFILE" ]
-    then
-        if [ -r "$PIDFILE" ]
-        then
-            pid=`cat "$PIDFILE"`
-            if [ "X$pid" != "X" ]
-            then
-                # It is possible that 'a' process with the pid exists but that it is not the
-                #  correct process.  This can happen in a number of cases, but the most
-                #  common is during system startup after an unclean shutdown.
-                # The ps statement below looks for the specific wrapper command running as
-                #  the pid.  If it is not found then the pid file is considered to be stale.
-                pidtest=`$PSEXE -p $pid -o args | grep "wrapper.pidfile" | tail -1`
-                if [ "X$pidtest" = "X" ]
-                then
-                    # This is a stale pid file.
-                    rm -f "$PIDFILE"
-                    echo "Removed stale pid file: $PIDFILE"
-                    pid=""
-                fi
-            fi
-        else
-            echo "Cannot read $PIDFILE."
-            exit 1
-        fi
-    fi
-}
-
-testpid() {
-    pid=`$PSEXE -p $pid | grep $pid | grep -v grep | awk '{print $1}' | tail -1`
-    if [ "X$pid" = "X" ]
-    then
-        # Process is gone so remove the pid file.
-        rm -f "$PIDFILE"
-        pid=""
-    fi
-}
-
-console() {
-    echo "Running $APP_LONG_NAME..."
-    getpid
-    if [ "X$pid" = "X" ]
-    then
-        # The string passed to eval must handles spaces in paths correctly.
-        COMMAND_LINE="$CMDNICE \"$WRAPPER_CMD\" \"$WRAPPER_CONF\" wrapper.syslog.ident=$APP_NAME wrapper.pidfile=\"$PIDFILE\" $ANCHORPROP $LOCKPROP"
-        eval $COMMAND_LINE
-    else
-        echo "$APP_LONG_NAME is already running."
-        exit 1
-    fi
-}
- 
-start() {
-    echo "Starting $APP_LONG_NAME..."
-    getpid
-    if [ "X$pid" = "X" ]
-    then
-        # The string passed to eval must handles spaces in paths correctly.
-        COMMAND_LINE="$CMDNICE \"$WRAPPER_CMD\" \"$WRAPPER_CONF\" wrapper.syslog.ident=$APP_NAME wrapper.pidfile=\"$PIDFILE\" wrapper.daemonize=TRUE $ANCHORPROP $IGNOREPROP $LOCKPROP"
-        eval $COMMAND_LINE
-    else
-        echo "$APP_LONG_NAME is already running."
-        exit 1
-    fi
-    getpid
-    if [ "X$pid" != "X" ]
-    then
-        echo "Started $APP_LONG_NAME."
-    else
-        echo "Failed to start $APP_LONG_NAME."
-    fi    
-}
- 
-stopit() {
-    echo "Stopping $APP_LONG_NAME..."
-    getpid
-    if [ "X$pid" = "X" ]
-    then
-        echo "$APP_LONG_NAME was not running."
-    else
-        if [ "X$IGNORE_SIGNALS" = "X" ]
-        then
-            # Running so try to stop it.
-            kill $pid
-            if [ $? -ne 0 ]
-            then
-                # An explanation for the failure should have been given
-                echo "Unable to stop $APP_LONG_NAME."
-                exit 1
-            fi
-        else
-            rm -f "$ANCHORFILE"
-            if [ -f "$ANCHORFILE" ]
-            then
-                # An explanation for the failure should have been given
-                echo "Unable to stop $APP_LONG_NAME."
-                exit 1
-            fi
-        fi
-
-        # We can not predict how long it will take for the wrapper to
-        #  actually stop as it depends on settings in wrapper.conf.
-        #  Loop until it does.
-        savepid=$pid
-        CNT=0
-        TOTCNT=0
-        while [ "X$pid" != "X" ]
-        do
-            # Show a waiting message every 5 seconds.
-            if [ "$CNT" -lt "5" ]
-            then
-                CNT=`expr $CNT + 1`
-            else
-                echo "Waiting for $APP_LONG_NAME to exit..."
-                CNT=0
-            fi
-            TOTCNT=`expr $TOTCNT + 1`
-
-            sleep 1
-
-            testpid
-        done
-
-        pid=$savepid
-        testpid
-        if [ "X$pid" != "X" ]
-        then
-            echo "Failed to stop $APP_LONG_NAME."
-            exit 1
-        else
-            echo "Stopped $APP_LONG_NAME."
-        fi
-    fi
-}
-
-status() {
-    getpid
-    if [ "X$pid" = "X" ]
-    then
-        echo "$APP_LONG_NAME is not running."
-        exit 1
-    else
-        echo "$APP_LONG_NAME is running ($pid)."
-        exit 0
-    fi
-}
-
-dump() {
-    echo "Dumping $APP_LONG_NAME..."
-    getpid
-    if [ "X$pid" = "X" ]
-    then
-        echo "$APP_LONG_NAME was not running."
-
-    else
-        kill -3 $pid
-
-        if [ $? -ne 0 ]
-        then
-            echo "Failed to dump $APP_LONG_NAME."
-            exit 1
-        else
-            echo "Dumped $APP_LONG_NAME."
-        fi
-    fi
-}
-
-case "$1" in
-
-    'console')
-        checkUser touchlock $1
-        console
-        ;;
-
-    'start')
-        checkUser touchlock $1
-        start
-        ;;
-
-    'stop')
-        checkUser "" $1
-        stopit
-        ;;
-
-    'restart')
-        checkUser touchlock $1
-        stopit
-        start
-        ;;
-
-    'status')
-        checkUser "" $1
-        status
-        ;;
-
-    'dump')
-        checkUser "" $1
-        dump
-        ;;
-
-    *)
-        echo "Usage: $0 { console | start | stop | restart | status | dump }"
-        exit 1
-        ;;
-esac
-
-exit 0
diff --git a/development/nexus/files/wrapper.conf b/development/nexus/files/wrapper.conf
deleted file mode 100644
index 2fe62598a6..0000000000
--- a/development/nexus/files/wrapper.conf
+++ /dev/null
@@ -1,157 +0,0 @@
-# JSW Configuration file
-#
-# For complete coverage of available configuration, please go here:
-# http://wrapper.tanukisoftware.org/doc/english/properties.html
-#
-# Some "most often used" keywords are added to end of this file
-# to be used as a "guideline". They are NOT the complete list of
-# keywords.
-
-# Set the JSW working directory (used as base for resolving relative paths)
-wrapper.working.dir=/usr/share/nexus
-
-# Set the JVM executable 
-# (modify this to absolute path if you need a Java that is not on the OS path)
-wrapper.java.command=%JAVA_HOME%/bin/java
-
-# The main class that JSW will execute within JVM
-wrapper.java.mainclass=org.codehaus.plexus.classworlds.launcher.Launcher
-
-# The JVM classpath
-wrapper.java.classpath.1=bin/jsw/lib/wrapper-3.2.3.jar
-wrapper.java.classpath.2=./lib/plexus-classworlds-*.jar
-wrapper.java.classpath.3=./conf/
-
-# The library path
-wrapper.java.library.path.1=bin/jsw/lib
-
-# Additional JVM parameters (tune if needed, but match the sequence of numbers!)
-wrapper.java.additional.1=-Dsun.net.inetaddr.ttl=3600
-wrapper.java.additional.2=-DbundleBasedir=.
-wrapper.java.additional.3=-Djava.io.tmpdir=./tmp
-wrapper.java.additional.4=-DjettyContext=nexus.properties
-wrapper.java.additional.5=-DjettyContextIncludeKeys=bundleBasedir
-wrapper.java.additional.6=-DjettyPlexusCompatibility=true
-#wrapper.java.additional.7=-Xdebug
-#wrapper.java.additional.8=-Xnoagent
-#wrapper.java.additional.9=-Djava.compiler=NONE
-#wrapper.java.additional.10=-Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=8000
-#wrapper.java.additional.11=-XX:+HeapDumpOnOutOfMemoryError
-
-wrapper.app.parameter.1=./conf/jetty.xml
-
-# Size Java memory, in MB (-Xms)
-#wrapper.java.initmemory=128
-# Size Java memory, in MB (-Xmx)
-#wrapper.java.maxmemory=256
-
-# How much to wait for JVM to respond to "ping" (increase on slower machines and VMs if needed)
-wrapper.ping.timeout=90
-# How much to wait for application to start up (increase on slower machines if needed)
-wrapper.startup.timeout=90
-
-# Make wrapper reload configuration between app restarts
-# and set exit code 12 as "RESTART" command
-wrapper.restart.reload_configuration=TRUE
-wrapper.on_exit.12=RESTART
-
-# Set up JSW logging
-wrapper.logfile=logs/wrapper.log
-wrapper.logfile.format=PM
-wrapper.logfile.loglevel=INFO
-wrapper.logfile.maxsize=10m
-wrapper.logfile.maxfiles=10
-
-# Set up system logging (if needed, change to INFO or other valid values)
-wrapper.syslog.loglevel=NONE
-
-# Set up JSW Console
-wrapper.console.title=Nexus OSS
-wrapper.console.format=PM
-wrapper.console.loglevel=INFO
-wrapper.console.flush=true
-
-# =============================================
-# An example wrapper.conf file is included
-# below for quick reference
-# =============================================
-
-# ********************************************************************
-# Wrapper Java Properties
-# ********************************************************************
-# Java Application
-#wrapper.java.command=java
-
-# Tell the Wrapper to log the full generated Java command line.
-#wrapper.java.command.loglevel=INFO
-
-# Java Main class.  This class must implement the WrapperListener interface
-#  or guarantee that the WrapperManager class is initialized.  Helper
-#  classes are provided to do this for you.  See the Integration section
-#  of the documentation for details.
-#wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp
-
-# Java Classpath (include wrapper.jar)  Add class path elements as
-#  needed starting from 1
-#wrapper.java.classpath.1=../lib/wrapper.jar
-
-# Java Library Path (location of Wrapper.DLL or libwrapper.so)
-#wrapper.java.library.path.1=../lib
-
-# Java Bits.  On applicable platforms, tells the JVM to run in 32 or 64-bit mode.
-#wrapper.java.additional.auto_bits=TRUE
-
-# Java Additional Parameters
-#wrapper.java.additional.1=
-
-# Initial Java Heap Size (in MB)
-#wrapper.java.initmemory=3
-
-# Maximum Java Heap Size (in MB)
-#wrapper.java.maxmemory=64
-
-# Application parameters.  Add parameters as needed starting from 1
-#wrapper.app.parameter.1=<YourMainClass>
-
-# ********************************************************************
-# Wrapper Logging Properties
-# ********************************************************************
-# Enables Debug output from the Wrapper.
-#wrapper.debug=TRUE
-
-# Format of output for the console.  (See docs for formats)
-#wrapper.console.format=PM
-
-# Log Level for console output.  (See docs for log levels)
-#wrapper.console.loglevel=INFO
-
-# Log file to use for wrapper output logging.
-#wrapper.logfile=../logs/wrapper.log
-
-# Format of output for the log file.  (See docs for formats)
-#wrapper.logfile.format=LPTM
-
-# Log Level for log file output.  (See docs for log levels)
-#wrapper.logfile.loglevel=INFO
-
-# Maximum size that the log file will be allowed to grow to before
-#  the log is rolled. Size is specified in bytes.  The default value
-#  of 0, disables log rolling.  May abbreviate with the 'k' (kb) or
-#  'm' (mb) suffix.  For example: 10m = 10 megabytes.
-#wrapper.logfile.maxsize=0
-
-# Maximum number of rolled log files which will be allowed before old
-#  files are deleted.  The default value of 0 implies no limit.
-#wrapper.logfile.maxfiles=0
-
-# Log Level for sys/event log output.  (See docs for log levels)
-#wrapper.syslog.loglevel=NONE
-
-# ********************************************************************
-# Wrapper General Properties
-# ********************************************************************
-# Allow for the use of non-contiguous numbered properties
-#wrapper.ignore_sequence_gaps=TRUE
-
-# Title to use when running as a console
-#wrapper.console.title=@app.long.name@
diff --git a/development/nexus/nexus.SlackBuild b/development/nexus/nexus.SlackBuild
index e49a3c17aa..44687b4b1b 100644
--- a/development/nexus/nexus.SlackBuild
+++ b/development/nexus/nexus.SlackBuild
@@ -2,7 +2,7 @@
 
 # Slackware build script for Sonatype Nexus
 
-# Copyright 2012  Giorgio Peron Campodarsego, PD, Italy giorgio.peron@gmail.com
+# Copyright 2013  Giorgio Peron Campodarsego, PD, Italy giorgio.peron@gmail.com
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PRGNAM=nexus
-VERSION=${VERSION:-2.0}
+VERSION=${VERSION:-2.5.0-04}
 BUILD=${BUILD:-1}
 TAG=${TAG:-_SBo}
 
@@ -101,23 +101,24 @@ ln -sf ../../../var/tmp/$PRGNAM tmp
 ln -sf ../../../var/log/$PRGNAM logs
 cd -
 cd $PKG/usr/share/$PRGNAM/bin/jsw
-  ln -sf ../../../../../etc/nexus conf
+  ln -sf ../../../../../etc/$PRGNAM conf
 cd -
 
-#Put startup script in place and set correct location
-cat $CWD/files/rc.$PRGNAM | \
-  sed -e "s/@NEXUS_ARCH@/$NEXUS_ARCH/g" \
-      -e "s/@LIBDIRSUFFIX@/$LIBDIRSUFFIX/g" \
-  > $PKG/etc/rc.d/rc.$PRGNAM.new
-
-#Replace two configuration files
-rm $PKG/etc/nexus/nexus.properties
-cat $CWD/files/nexus.properties > $PKG/etc/nexus/nexus.properties.new
-rm $PKG/etc/nexus/wrapper.conf
-cat $CWD/files/wrapper.conf > $PKG/etc/nexus/wrapper.conf.new
+# Rename to rc.nexus
+mv $PKG/usr/share/$PRGNAM/bin/$PRGNAM $PKG/etc/rc.d/rc.$PRGNAM.new
+# Fix configuration files
+sed -i "s:NEXUS_HOME=\"..\":NEXUS_HOME=\"/usr/share/$PRGNAM\":g" $PKG/etc/rc.d/rc.$PRGNAM.new
+sed -i "s:#RUN_AS_USER=:RUN_AS_USER=nexus:g" $PKG/etc/rc.d/rc.$PRGNAM.new
+sed -i "s:#PIDDIR=\".\":PIDDIR=\"/var/run/$PRGNAM\":g" $PKG/etc/rc.d/rc.$PRGNAM.new
+sed -i "s:DIST_ARCH=\`uname -p:DIST_ARCH=\`uname -m:g" $PKG/etc/rc.d/rc.$PRGNAM.new
+sed -i "s:nexus-work=\${bundleBasedir}/../sonatype-work/nexus:nexus-work=/var/lib/$PRGNAM:g" $PKG/etc/$PRGNAM/$PRGNAM.properties
+sed -i "s:wrapper.working.dir=../../..:wrapper.working.dir=/usr/share/$PRGNAM:g" $PKG/etc/$PRGNAM/wrapper.conf
+sed -i "s:wrapper.java.command=java:wrapper.java.command=/usr/lib$LIBDIRSUFFIX/java/bin/java:g" $PKG/etc/$PRGNAM/wrapper.conf
+mv $PKG/etc/$PRGNAM/$PRGNAM.properties $PKG/etc/$PRGNAM/$PRGNAM.properties.new
+mv $PKG/etc/$PRGNAM/wrapper.conf $PKG/etc/$PRGNAM/wrapper.conf.new
 
 #Fix ownership of some dirs
-chown -R nexus:nexus $PKG/var/{lib,log,run,tmp}/nexus
+chown -R nexus:nexus $PKG/var/{lib,log,run,tmp}/$PRGNAM
 
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
diff --git a/development/nexus/nexus.info b/development/nexus/nexus.info
index 588d49b793..d9b25d013b 100644
--- a/development/nexus/nexus.info
+++ b/development/nexus/nexus.info
@@ -1,8 +1,8 @@
 PRGNAM="nexus"
-VERSION="2.0"
+VERSION="2.5.0-04"
 HOMEPAGE="http://nexus.sonatype.org"
-DOWNLOAD="http://www.sonatype.org/downloads/nexus-2.0-bundle.tar.gz"
-MD5SUM="e63dc8a99d75d2afdcbf51d86ba74745"
+DOWNLOAD="http://www.sonatype.org/downloads/nexus-2.5.0-04-bundle.tar.gz"
+MD5SUM="9ba35b7b72c2e2eff87298b4c1e77a9a"
 DOWNLOAD_x86_64=""
 MD5SUM_x86_64=""
 REQUIRES="jdk"