development/nexus: Updated for version 2.0.

Signed-off-by: dsomero <xgizzmo@slackbuilds.org>

3 files changed, 688 insertions, 0 deletions

diff --git a/development/nexus/files/nexus.properties b/development/nexus/files/nexus.properties
new file mode 100644
index 0000000000..49dcebef1a
--- /dev/null
+++ b/development/nexus/files/nexus.properties
@@ -0,0 +1,14 @@
+# Sonatype Nexus
+# ==============
+# This is the most basic configuration of Nexus.
+
+# Jetty section
+application-port=8081
+application-host=0.0.0.0
+nexus-webapp=${bundleBasedir}/nexus
+nexus-webapp-context-path=/nexus
+
+# Nexus section
+nexus-work=/var/lib/nexus
+runtime=${bundleBasedir}/nexus/WEB-INF
+ 
diff --git a/development/nexus/files/rc.nexus b/development/nexus/files/rc.nexus
new file mode 100644
index 0000000000..5eb81d8feb
--- /dev/null
+++ b/development/nexus/files/rc.nexus
@@ -0,0 +1,517 @@
+#! /bin/sh
+
+#
+# Copyright (c) 1999, 2006 Tanuki Software Inc.
+#
+# Java Service Wrapper sh script.  Suitable for starting and stopping
+#  wrapped Java applications on UNIX platforms.
+#
+
+#-----------------------------------------------------------------------------
+# These settings can be modified to fit the needs of your application
+
+# If specified, the Wrapper will be run as the specified user.
+
+# IMPORTANT - Make sure that the user has the required privileges to write into the Nexus installation directory.
+
+# NOTE - This will set the user which is used to run the Wrapper as well as
+#  the JVM and is not useful in situations where a privileged resource or
+#  port needs to be allocated prior to the user being changed.
+RUN_AS_USER=nexus
+
+# Application
+APP_NAME="nexus"
+APP_LONG_NAME="Nexus OSS"
+
+# Wrapper
+WRAPPER_CMD="/usr/share/nexus/bin/jsw/@NEXUS_ARCH@/wrapper"
+WRAPPER_CONF="/usr/share/nexus/bin/jsw/conf/wrapper.conf"
+
+# Priority at which to run the wrapper.  See "man nice" for valid priorities.
+#  nice is only used if a priority is specified.
+PRIORITY=
+
+# Location of the pid file.
+PIDDIR="/var/run/nexus"
+
+# If uncommented, causes the Wrapper to be shutdown using an anchor file.
+#  When launched with the 'start' command, it will also ignore all INT and
+#  TERM signals.
+#IGNORE_SIGNALS=true
+
+# The following two lines are used by the chkconfig command. Change as is
+#  appropriate for your application.  They should remain commented.
+# chkconfig: 2345 20 80
+# description: Test Wrapper Sample Application
+
+# Do not modify anything beyond this point
+#-----------------------------------------------------------------------------
+
+# Get the fully qualified path to the script
+case $0 in
+    /*)
+        SCRIPT="$0"
+        ;;
+    *)
+        PWD=`pwd`
+        SCRIPT="$PWD/$0"
+        ;;
+esac
+
+# Resolve the true real path without any sym links.
+CHANGED=true
+while [ "X$CHANGED" != "X" ]
+do
+    # Change spaces to ":" so the tokens can be parsed.
+    SAFESCRIPT=`echo $SCRIPT | sed -e 's; ;:;g'`
+    # Get the real path to this script, resolving any symbolic links
+    TOKENS=`echo $SAFESCRIPT | sed -e 's;/; ;g'`
+    REALPATH=
+    for C in $TOKENS; do
+        # Change any ":" in the token back to a space.
+        C=`echo $C | sed -e 's;:; ;g'`
+        REALPATH="$REALPATH/$C"
+        # If REALPATH is a sym link, resolve it.  Loop for nested links.
+        while [ -h "$REALPATH" ] ; do
+            LS="`ls -ld "$REALPATH"`"
+            LINK="`expr "$LS" : '.*-> \(.*\)$'`"
+            if expr "$LINK" : '/.*' > /dev/null; then
+                # LINK is absolute.
+                REALPATH="$LINK"
+            else
+                # LINK is relative.
+                REALPATH="`dirname "$REALPATH"`""/$LINK"
+            fi
+        done
+    done
+
+    if [ "$REALPATH" = "$SCRIPT" ]
+    then
+        CHANGED=""
+    else
+        SCRIPT="$REALPATH"
+    fi
+done
+
+# Change the current directory to the location of the script
+cd "`dirname "$REALPATH"`"
+REALDIR=`pwd`
+
+# Resolve the location of the 'ps' command
+PSEXE="/usr/bin/ps"
+if [ ! -x "$PSEXE" ]
+then
+    PSEXE="/bin/ps"
+    if [ ! -x "$PSEXE" ]
+    then
+        echo "Unable to locate 'ps'."
+        echo "Please report this message along with the location of the command on your system."
+        exit 1
+    fi
+fi
+
+# Resolve the os
+DIST_OS=`uname -s | tr [:upper:] [:lower:] | tr -d [:blank:]`
+case "$DIST_OS" in
+    'sunos')
+        DIST_OS="solaris"
+        ;;
+    'hp-ux' | 'hp-ux64')
+        DIST_OS="hpux"
+        ;;
+    'darwin')
+        DIST_OS="macosx"
+        ;;
+    'unix_sv')
+        DIST_OS="unixware"
+        ;;
+esac
+
+# Resolve the architecture
+DIST_ARCH=`uname -p | tr [:upper:] [:lower:] | tr -d [:blank:]`
+if [ "$DIST_ARCH" = "unknown" ]
+then
+    DIST_ARCH=`uname -m | tr [:upper:] [:lower:] | tr -d [:blank:]`
+fi
+case "$DIST_ARCH" in
+    'amd64' | 'athlon' | 'ia32' | 'ia64' | 'i386' | 'i486' | 'i586' | 'i686' | 'x86_64')
+        DIST_ARCH="x86"
+        ;;
+    'ip27')
+        DIST_ARCH="mips"
+        ;;
+    'power' | 'powerpc' | 'power_pc' | 'ppc64')
+        DIST_ARCH="ppc"
+        ;;
+    'pa_risc' | 'pa-risc')
+        DIST_ARCH="parisc"
+        ;;
+    'sun4u' | 'sparcv9')
+        DIST_ARCH="sparc"
+        ;;
+    '9000/800')
+        DIST_ARCH="parisc"
+        ;;
+esac
+
+outputFile() {
+    if [ -f "$1" ]
+    then
+        echo "  $1 (Found but not executable.)";
+    else
+        echo "  $1"
+    fi
+}
+
+# Default PIDDIR to current directory
+if [ "X$PIDDIR" = "X" ]
+then
+    PIDDIR="."
+fi
+
+# If the PIDDIR is relative, set its value relative to the full REALPATH to avoid problems if
+#  the working directory is later changed.
+FIRST_CHAR=`echo $PIDDIR | cut -c1,1`
+if [ "$FIRST_CHAR" != "/" ]
+then
+    PIDDIR=$REALDIR/$PIDDIR
+fi
+# Same test for WRAPPER_CMD
+FIRST_CHAR=`echo $WRAPPER_CMD | cut -c1,1`
+if [ "$FIRST_CHAR" != "/" ]
+then
+    WRAPPER_CMD=$REALDIR/$WRAPPER_CMD
+fi
+# Same test for WRAPPER_CONF
+FIRST_CHAR=`echo $WRAPPER_CONF | cut -c1,1`
+if [ "$FIRST_CHAR" != "/" ]
+then
+    WRAPPER_CONF=$REALDIR/$WRAPPER_CONF
+fi
+
+# Process ID
+ANCHORFILE="$PIDDIR/$APP_NAME.anchor"
+PIDFILE="$PIDDIR/$APP_NAME.pid"
+LOCKDIR="/var/lock/subsys"
+LOCKFILE="$LOCKDIR/$APP_NAME"
+pid=""
+
+if [ ! -x "$WRAPPER_CMD" ]; then
+    echo "Missing platform binary: $WRAPPER_CMD"
+    exit 1
+fi
+
+# Build the nice clause
+if [ "X$PRIORITY" = "X" ]
+then
+    CMDNICE=""
+else
+    CMDNICE="nice -$PRIORITY"
+fi
+
+# Build the anchor file clause.
+if [ "X$IGNORE_SIGNALS" = "X" ]
+then
+   ANCHORPROP=
+   IGNOREPROP=
+else
+   ANCHORPROP=wrapper.anchorfile=\"$ANCHORFILE\"
+   IGNOREPROP=wrapper.ignore_signals=TRUE
+fi
+
+# Build the lock file clause.  Only create a lock file if the lock directory exists on this platform.
+LOCKPROP=
+if [ -d $LOCKDIR ]
+then
+    if [ -w $LOCKDIR ]
+    then
+        LOCKPROP=wrapper.lockfile=\"$LOCKFILE\"
+    fi
+fi
+
+checkUser() {
+    # $1 touchLock flag
+    # $2 command
+
+    # Resolve the location of the 'id' command
+    IDEXE="/usr/xpg4/bin/id"
+    if [ ! -x "$IDEXE" ]
+    then
+        IDEXE="/usr/bin/id"
+        if [ ! -x "$IDEXE" ]
+        then
+            echo "Unable to locate 'id'."
+            echo "Please report this message along with the location of the command on your system."
+            exit 1
+        fi
+    fi
+
+    # Check the configured user.  If necessary rerun this script as the desired user.
+    if [ "X$RUN_AS_USER" != "X" ]
+    then
+        if [ "`$IDEXE -u -n`" != "$RUN_AS_USER" ]
+        then
+            # If LOCKPROP and $RUN_AS_USER are defined then the new user will most likely not be
+            # able to create the lock file.  The Wrapper will be able to update this file once it
+            # is created but will not be able to delete it on shutdown.  If $2 is defined then
+            # the lock file should be created for the current command
+            if [ "X$LOCKPROP" != "X" ]
+            then
+                if [ "X$1" != "X" ]
+                then
+                    # Resolve the primary group 
+                    RUN_AS_GROUP=`groups $RUN_AS_USER | awk '{print $3}' | tail -1`
+                    if [ "X$RUN_AS_GROUP" = "X" ]
+                    then
+                        RUN_AS_GROUP=$RUN_AS_USER
+                    fi
+                    touch $LOCKFILE
+                    chown $RUN_AS_USER:$RUN_AS_GROUP $LOCKFILE
+                fi
+            fi
+    
+            # Still want to change users, recurse.  This means that the user will only be
+            #  prompted for a password once. Variables shifted by 1
+            su -m $RUN_AS_USER -c "\"$REALPATH\" $2"
+    
+            # Now that we are the original user again, we may need to clean up the lock file.
+            if [ "X$LOCKPROP" != "X" ]
+            then
+                getpid
+                if [ "X$pid" = "X" ]
+                then
+                    # Wrapper is not running so make sure the lock file is deleted.
+                    if [ -f "$LOCKFILE" ]
+                    then
+                        rm "$LOCKFILE"
+                    fi
+                fi
+            fi
+    
+            exit 0
+        fi
+    fi
+
+    # Check that script is not run as root
+    LUID=`$IDEXE -u`
+    if [ $LUID -eq 0 ]
+    then
+        echo "****************************************"
+        echo "WARNING - NOT RECOMMENDED TO RUN AS ROOT"
+        echo "****************************************"
+        if [ ! "`$IDEXE -u -n`" = "$RUN_AS_USER" ]
+        then
+            echo "If you insist running as root, then set the environment variable RUN_AS_USER=root before running this script."
+            exit 1
+        fi
+    fi
+}
+
+getpid() {
+    if [ -f "$PIDFILE" ]
+    then
+        if [ -r "$PIDFILE" ]
+        then
+            pid=`cat "$PIDFILE"`
+            if [ "X$pid" != "X" ]
+            then
+                # It is possible that 'a' process with the pid exists but that it is not the
+                #  correct process.  This can happen in a number of cases, but the most
+                #  common is during system startup after an unclean shutdown.
+                # The ps statement below looks for the specific wrapper command running as
+                #  the pid.  If it is not found then the pid file is considered to be stale.
+                pidtest=`$PSEXE -p $pid -o args | grep "wrapper.pidfile" | tail -1`
+                if [ "X$pidtest" = "X" ]
+                then
+                    # This is a stale pid file.
+                    rm -f "$PIDFILE"
+                    echo "Removed stale pid file: $PIDFILE"
+                    pid=""
+                fi
+            fi
+        else
+            echo "Cannot read $PIDFILE."
+            exit 1
+        fi
+    fi
+}
+
+testpid() {
+    pid=`$PSEXE -p $pid | grep $pid | grep -v grep | awk '{print $1}' | tail -1`
+    if [ "X$pid" = "X" ]
+    then
+        # Process is gone so remove the pid file.
+        rm -f "$PIDFILE"
+        pid=""
+    fi
+}
+
+console() {
+    echo "Running $APP_LONG_NAME..."
+    getpid
+    if [ "X$pid" = "X" ]
+    then
+        # The string passed to eval must handles spaces in paths correctly.
+        COMMAND_LINE="$CMDNICE \"$WRAPPER_CMD\" \"$WRAPPER_CONF\" wrapper.syslog.ident=$APP_NAME wrapper.pidfile=\"$PIDFILE\" $ANCHORPROP $LOCKPROP"
+        eval $COMMAND_LINE
+    else
+        echo "$APP_LONG_NAME is already running."
+        exit 1
+    fi
+}
+ 
+start() {
+    echo "Starting $APP_LONG_NAME..."
+    getpid
+    if [ "X$pid" = "X" ]
+    then
+        # The string passed to eval must handles spaces in paths correctly.
+        COMMAND_LINE="$CMDNICE \"$WRAPPER_CMD\" \"$WRAPPER_CONF\" wrapper.syslog.ident=$APP_NAME wrapper.pidfile=\"$PIDFILE\" wrapper.daemonize=TRUE $ANCHORPROP $IGNOREPROP $LOCKPROP"
+        eval $COMMAND_LINE
+    else
+        echo "$APP_LONG_NAME is already running."
+        exit 1
+    fi
+    getpid
+    if [ "X$pid" != "X" ]
+    then
+        echo "Started $APP_LONG_NAME."
+    else
+        echo "Failed to start $APP_LONG_NAME."
+    fi    
+}
+ 
+stopit() {
+    echo "Stopping $APP_LONG_NAME..."
+    getpid
+    if [ "X$pid" = "X" ]
+    then
+        echo "$APP_LONG_NAME was not running."
+    else
+        if [ "X$IGNORE_SIGNALS" = "X" ]
+        then
+            # Running so try to stop it.
+            kill $pid
+            if [ $? -ne 0 ]
+            then
+                # An explanation for the failure should have been given
+                echo "Unable to stop $APP_LONG_NAME."
+                exit 1
+            fi
+        else
+            rm -f "$ANCHORFILE"
+            if [ -f "$ANCHORFILE" ]
+            then
+                # An explanation for the failure should have been given
+                echo "Unable to stop $APP_LONG_NAME."
+                exit 1
+            fi
+        fi
+
+        # We can not predict how long it will take for the wrapper to
+        #  actually stop as it depends on settings in wrapper.conf.
+        #  Loop until it does.
+        savepid=$pid
+        CNT=0
+        TOTCNT=0
+        while [ "X$pid" != "X" ]
+        do
+            # Show a waiting message every 5 seconds.
+            if [ "$CNT" -lt "5" ]
+            then
+                CNT=`expr $CNT + 1`
+            else
+                echo "Waiting for $APP_LONG_NAME to exit..."
+                CNT=0
+            fi
+            TOTCNT=`expr $TOTCNT + 1`
+
+            sleep 1
+
+            testpid
+        done
+
+        pid=$savepid
+        testpid
+        if [ "X$pid" != "X" ]
+        then
+            echo "Failed to stop $APP_LONG_NAME."
+            exit 1
+        else
+            echo "Stopped $APP_LONG_NAME."
+        fi
+    fi
+}
+
+status() {
+    getpid
+    if [ "X$pid" = "X" ]
+    then
+        echo "$APP_LONG_NAME is not running."
+        exit 1
+    else
+        echo "$APP_LONG_NAME is running ($pid)."
+        exit 0
+    fi
+}
+
+dump() {
+    echo "Dumping $APP_LONG_NAME..."
+    getpid
+    if [ "X$pid" = "X" ]
+    then
+        echo "$APP_LONG_NAME was not running."
+
+    else
+        kill -3 $pid
+
+        if [ $? -ne 0 ]
+        then
+            echo "Failed to dump $APP_LONG_NAME."
+            exit 1
+        else
+            echo "Dumped $APP_LONG_NAME."
+        fi
+    fi
+}
+
+case "$1" in
+
+    'console')
+        checkUser touchlock $1
+        console
+        ;;
+
+    'start')
+        checkUser touchlock $1
+        start
+        ;;
+
+    'stop')
+        checkUser "" $1
+        stopit
+        ;;
+
+    'restart')
+        checkUser touchlock $1
+        stopit
+        start
+        ;;
+
+    'status')
+        checkUser "" $1
+        status
+        ;;
+
+    'dump')
+        checkUser "" $1
+        dump
+        ;;
+
+    *)
+        echo "Usage: $0 { console | start | stop | restart | status | dump }"
+        exit 1
+        ;;
+esac
+
+exit 0
diff --git a/development/nexus/files/wrapper.conf b/development/nexus/files/wrapper.conf
new file mode 100644
index 0000000000..2fe62598a6
--- /dev/null
+++ b/development/nexus/files/wrapper.conf
@@ -0,0 +1,157 @@
+# JSW Configuration file
+#
+# For complete coverage of available configuration, please go here:
+# http://wrapper.tanukisoftware.org/doc/english/properties.html
+#
+# Some "most often used" keywords are added to end of this file
+# to be used as a "guideline". They are NOT the complete list of
+# keywords.
+
+# Set the JSW working directory (used as base for resolving relative paths)
+wrapper.working.dir=/usr/share/nexus
+
+# Set the JVM executable 
+# (modify this to absolute path if you need a Java that is not on the OS path)
+wrapper.java.command=%JAVA_HOME%/bin/java
+
+# The main class that JSW will execute within JVM
+wrapper.java.mainclass=org.codehaus.plexus.classworlds.launcher.Launcher
+
+# The JVM classpath
+wrapper.java.classpath.1=bin/jsw/lib/wrapper-3.2.3.jar
+wrapper.java.classpath.2=./lib/plexus-classworlds-*.jar
+wrapper.java.classpath.3=./conf/
+
+# The library path
+wrapper.java.library.path.1=bin/jsw/lib
+
+# Additional JVM parameters (tune if needed, but match the sequence of numbers!)
+wrapper.java.additional.1=-Dsun.net.inetaddr.ttl=3600
+wrapper.java.additional.2=-DbundleBasedir=.
+wrapper.java.additional.3=-Djava.io.tmpdir=./tmp
+wrapper.java.additional.4=-DjettyContext=nexus.properties
+wrapper.java.additional.5=-DjettyContextIncludeKeys=bundleBasedir
+wrapper.java.additional.6=-DjettyPlexusCompatibility=true
+#wrapper.java.additional.7=-Xdebug
+#wrapper.java.additional.8=-Xnoagent
+#wrapper.java.additional.9=-Djava.compiler=NONE
+#wrapper.java.additional.10=-Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=8000
+#wrapper.java.additional.11=-XX:+HeapDumpOnOutOfMemoryError
+
+wrapper.app.parameter.1=./conf/jetty.xml
+
+# Size Java memory, in MB (-Xms)
+#wrapper.java.initmemory=128
+# Size Java memory, in MB (-Xmx)
+#wrapper.java.maxmemory=256
+
+# How much to wait for JVM to respond to "ping" (increase on slower machines and VMs if needed)
+wrapper.ping.timeout=90
+# How much to wait for application to start up (increase on slower machines if needed)
+wrapper.startup.timeout=90
+
+# Make wrapper reload configuration between app restarts
+# and set exit code 12 as "RESTART" command
+wrapper.restart.reload_configuration=TRUE
+wrapper.on_exit.12=RESTART
+
+# Set up JSW logging
+wrapper.logfile=logs/wrapper.log
+wrapper.logfile.format=PM
+wrapper.logfile.loglevel=INFO
+wrapper.logfile.maxsize=10m
+wrapper.logfile.maxfiles=10
+
+# Set up system logging (if needed, change to INFO or other valid values)
+wrapper.syslog.loglevel=NONE
+
+# Set up JSW Console
+wrapper.console.title=Nexus OSS
+wrapper.console.format=PM
+wrapper.console.loglevel=INFO
+wrapper.console.flush=true
+
+# =============================================
+# An example wrapper.conf file is included
+# below for quick reference
+# =============================================
+
+# ********************************************************************
+# Wrapper Java Properties
+# ********************************************************************
+# Java Application
+#wrapper.java.command=java
+
+# Tell the Wrapper to log the full generated Java command line.
+#wrapper.java.command.loglevel=INFO
+
+# Java Main class.  This class must implement the WrapperListener interface
+#  or guarantee that the WrapperManager class is initialized.  Helper
+#  classes are provided to do this for you.  See the Integration section
+#  of the documentation for details.
+#wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp
+
+# Java Classpath (include wrapper.jar)  Add class path elements as
+#  needed starting from 1
+#wrapper.java.classpath.1=../lib/wrapper.jar
+
+# Java Library Path (location of Wrapper.DLL or libwrapper.so)
+#wrapper.java.library.path.1=../lib
+
+# Java Bits.  On applicable platforms, tells the JVM to run in 32 or 64-bit mode.
+#wrapper.java.additional.auto_bits=TRUE
+
+# Java Additional Parameters
+#wrapper.java.additional.1=
+
+# Initial Java Heap Size (in MB)
+#wrapper.java.initmemory=3
+
+# Maximum Java Heap Size (in MB)
+#wrapper.java.maxmemory=64
+
+# Application parameters.  Add parameters as needed starting from 1
+#wrapper.app.parameter.1=<YourMainClass>
+
+# ********************************************************************
+# Wrapper Logging Properties
+# ********************************************************************
+# Enables Debug output from the Wrapper.
+#wrapper.debug=TRUE
+
+# Format of output for the console.  (See docs for formats)
+#wrapper.console.format=PM
+
+# Log Level for console output.  (See docs for log levels)
+#wrapper.console.loglevel=INFO
+
+# Log file to use for wrapper output logging.
+#wrapper.logfile=../logs/wrapper.log
+
+# Format of output for the log file.  (See docs for formats)
+#wrapper.logfile.format=LPTM
+
+# Log Level for log file output.  (See docs for log levels)
+#wrapper.logfile.loglevel=INFO
+
+# Maximum size that the log file will be allowed to grow to before
+#  the log is rolled. Size is specified in bytes.  The default value
+#  of 0, disables log rolling.  May abbreviate with the 'k' (kb) or
+#  'm' (mb) suffix.  For example: 10m = 10 megabytes.
+#wrapper.logfile.maxsize=0
+
+# Maximum number of rolled log files which will be allowed before old
+#  files are deleted.  The default value of 0 implies no limit.
+#wrapper.logfile.maxfiles=0
+
+# Log Level for sys/event log output.  (See docs for log levels)
+#wrapper.syslog.loglevel=NONE
+
+# ********************************************************************
+# Wrapper General Properties
+# ********************************************************************
+# Allow for the use of non-contiguous numbered properties
+#wrapper.ignore_sequence_gaps=TRUE
+
+# Title to use when running as a console
+#wrapper.console.title=@app.long.name@