haskell/haskell-blaze-builder: Added (Efficient buffered output)

Signed-off-by: dsomero <xgizzmo@slackbuilds.org>

5 files changed, 151 insertions, 0 deletions

diff --git a/haskell/haskell-blaze-builder/README b/haskell/haskell-blaze-builder/README
new file mode 100644
index 0000000000..ca836c033e
--- /dev/null
+++ b/haskell/haskell-blaze-builder/README
@@ -0,0 +1,13 @@
+This library provides an abstraction of buffered output of byte
+streams and several convenience functions to exploit it.  For
+example, it allows to efficiently serialize Haskell values to lazy
+bytestrings with a large average chunk size.  The large average
+chunk size allows to make good use of cache prefetching in later
+processing steps (e.g. compression) and reduces the sytem call
+overhead when writing the resulting lazy bytestring to a file or
+sending it over the network.
+
+This requires ghc and haskell-text.
+
+After uninstalling, run this command to unregister the package from
+the ghc package database:   ghc-pkg recache
diff --git a/haskell/haskell-blaze-builder/doinst.sh b/haskell/haskell-blaze-builder/doinst.sh
new file mode 100644
index 0000000000..3268c238bf
--- /dev/null
+++ b/haskell/haskell-blaze-builder/doinst.sh
@@ -0,0 +1 @@
+chroot . /usr/bin/ghc-pkg recache
diff --git a/haskell/haskell-blaze-builder/haskell-blaze-builder.SlackBuild b/haskell/haskell-blaze-builder/haskell-blaze-builder.SlackBuild
new file mode 100644
index 0000000000..827ef7c796
--- /dev/null
+++ b/haskell/haskell-blaze-builder/haskell-blaze-builder.SlackBuild
@@ -0,0 +1,108 @@
+#!/bin/sh
+
+# Slackware build script for blaze-builder
+
+# Copyright 2012 Mikko Värri, Finland
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=haskell-blaze-builder
+VERSION=${VERSION:-0.3.1.0}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+SRCNAM="$( echo $PRGNAM | cut -d- -f2- )"
+
+GHC_VERSION=$(ghc --numeric-version)
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $SRCNAM-$VERSION
+tar xvf $CWD/$SRCNAM-$VERSION.tar.gz
+cd $SRCNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+runghc Setup configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --libsubdir=ghc-${GHC_VERSION}/$SRCNAM-$VERSION \
+  --enable-shared \
+  --enable-library-profiling \
+  --docdir=/usr/doc/$PRGNAM-$VERSION
+
+runghc Setup build
+runghc Setup haddock
+runghc Setup copy --destdir=$PKG
+runghc Setup register --gen-pkg-config
+
+PKGCONFD=/usr/lib${LIBDIRSUFFIX}/ghc-${GHC_VERSION}/package.conf.d
+PKGID=$( grep -E "^id: " $SRCNAM-$VERSION.conf | cut -d" " -f2 )
+mkdir -p $PKG/$PKGCONFD
+mv $SRCNAM-$VERSION.conf $PKG/$PKGCONFD/$PKGID.conf
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a LICENSE README.markdown CHANGES $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/haskell/haskell-blaze-builder/haskell-blaze-builder.info b/haskell/haskell-blaze-builder/haskell-blaze-builder.info
new file mode 100644
index 0000000000..bca84c4c93
--- /dev/null
+++ b/haskell/haskell-blaze-builder/haskell-blaze-builder.info
@@ -0,0 +1,10 @@
+PRGNAM="haskell-blaze-builder"
+VERSION="0.3.1.0"
+HOMEPAGE="http://hackage.haskell.org/package/blaze-builder"
+DOWNLOAD="http://hackage.haskell.org/packages/archive/blaze-builder/0.3.1.0/blaze-builder-0.3.1.0.tar.gz"
+MD5SUM="8130120b421fa07b38d023c0a0e291b9"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+MAINTAINER="Mikko Värri"
+EMAIL="vmj@linuxbox.fi"
+APPROVED="dsomero"
diff --git a/haskell/haskell-blaze-builder/slack-desc b/haskell/haskell-blaze-builder/slack-desc
new file mode 100644
index 0000000000..11bd040d83
--- /dev/null
+++ b/haskell/haskell-blaze-builder/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                     |-----handy-ruler------------------------------------------------------|
+haskell-blaze-builder: haskell-blaze-builder (Efficient buffered output)
+haskell-blaze-builder:
+haskell-blaze-builder: This library provides an abstraction of buffered output of byte
+haskell-blaze-builder: streams and several convenience functions to exploit it.  For
+haskell-blaze-builder: example, it allows to efficiently serialize Haskell values to lazy
+haskell-blaze-builder: bytestrings with a large average chunk size.  The large average
+haskell-blaze-builder: chunk size allows to make good use of cache prefetching in later
+haskell-blaze-builder: processing steps (e.g. compression) and reduces the sytem call
+haskell-blaze-builder: overhead when writing the resulting lazy bytestring to a file or
+haskell-blaze-builder: sending it over the network.
+haskell-blaze-builder: