libraries/ilbc: Removed. Replaced by libilbc.

Signed-off-by: Heinz Wiesinger <pprkut@slackbuilds.org>

7 files changed, 0 insertions, 287 deletions

diff --git a/libraries/ilbc/README b/libraries/ilbc/README
deleted file mode 100644
index bca15d2b9b..0000000000
--- a/libraries/ilbc/README
+++ /dev/null
@@ -1,4 +0,0 @@
-iLBC (internet Low Bitrate Codec) is a speech codec suitable for robust voice
-communication over IP, and is designed for narrow band speech.  The iLBC 
-codec enables graceful speech quality degradation in the case of lost frames, 
-which occurs in connection with lost or delayed IP packets.
diff --git a/libraries/ilbc/configure b/libraries/ilbc/configure
deleted file mode 100644
index 5efa4417fb..0000000000
--- a/libraries/ilbc/configure
+++ /dev/null
@@ -1,70 +0,0 @@
-#!/bin/sh
-
-# Copyright 2008 Mauro Giachero (mauro dot giachero at gmail dot com)
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# Prepare iLBC build environment
-
-set -e
-
-# [1/2] Prepare some basic documentation
-cat >COPYING <<EOF
-The iLBC license is contained in gips_iLBClicense-1.pdf.
-
-If not locally available, you can fetch it from
-  http://www.ilbcfreeware.org/documentation/gips_iLBClicense.pdf
-EOF
-
-# [2/2] Create a simple ilbc Makefile.
-SOURCES=`echo *.c`
-
-cat >Makefile <<EOF
-NAME = ilbc
-
-LIBNAME = lib\$(NAME).so
-SOURCES = $SOURCES
-OBJECTS = \$(SOURCES:%.c=%.o)
-
-CFLAGS = $CFLAGS
-
-DESTDIR ?= 
-
-.PHONY: all install clean distclean
-
-all: \$(LIBNAME)
-
-\$(LIBNAME): \$(OBJECTS)
-	\$(CC) -lm -shared -o \$(LIBNAME) \$(OBJECTS)
-
-%.o: %.c
-	\$(CC) \$(CFLAGS) -c -o \$@ \$<
-
-clean:
-	rm -f \$(LIBNAME) \$(OBJECTS)
-
-distclean: clean
-	rm -f Makefile
-
-install:
-	mkdir -p \$(DESTDIR)/usr/lib
-	cp \$(LIBNAME) \$(DESTDIR)/usr/lib
-	mkdir -p \$(DESTDIR)/usr/include/\$(NAME)
-	cp *.h \$(DESTDIR)/usr/include/\$(NAME)
-EOF
diff --git a/libraries/ilbc/extract-code.sh b/libraries/ilbc/extract-code.sh
deleted file mode 100644
index 58202d1fe7..0000000000
--- a/libraries/ilbc/extract-code.sh
+++ /dev/null
@@ -1,81 +0,0 @@
-#!/bin/sh
-
-# Copyright 2008 Mauro Giachero (mauro dot giachero at gmail dot com)
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# This script extracts the source code files from rfc3951.txt, which
-# should be fed from stdin.
-# The first command line parameter, if provided, is used as the
-# extraction folder.
-
-set -e
-
-FILENAME=""
-
-# Create the extraction folder
-if [ "$1" != "" ] ; then
-  mkdir -p "$1"
-  cd "$1"
-fi
-
-# Jump to appendix A
-while :; do
-  if ! IFS= read LINE ; then
-    echo "Error: file ended prematurely." >&2
-    exit 1
-  fi
-
-  if [ "$LINE" = "APPENDIX A.  Reference Implementation" ]; then
-    break
-  fi
-done
-
-# Read the source code
-while :; do
-  if ! IFS= read LINE ; then
-    break
-  fi
-
-  if [ "${LINE:0:2}" = "A." ]; then             # Source file begin
-    FILENAME=`echo ${LINE:6}`
-    if [ -e $FILENAME ]; then
-      echo "Error: file '$FILENAME' already exists!"
-      exit 2
-    fi
-    echo "$FILENAME"
-  elif [ "${LINE:0:8}" = "Andersen" ]; then     # Footer
-    continue
-  elif [ "${LINE:0:3}" = "RFC" ]; then          # Header
-    continue
-  elif [ "$LINE" = "Authors' Addresses" ]; then # Appendix end
-    break
-  elif [ "$FILENAME" != "" ]; then              # File content
-    echo "$LINE" >>$FILENAME
-  fi
-done
-
-# One extra check, just in case
-if [ "$FILENAME" = "" ]; then
-  echo "Error: no source file found!"
-  exit 3
-fi
-
-# Apparently everything went ok
-exit 0
diff --git a/libraries/ilbc/gips_iLBClicense.pdf b/libraries/ilbc/gips_iLBClicense.pdf
deleted file mode 100644
index b3a40c6ba7..0000000000
--- a/libraries/ilbc/gips_iLBClicense.pdf
+++ /dev/null
diff --git a/libraries/ilbc/ilbc.SlackBuild b/libraries/ilbc/ilbc.SlackBuild
deleted file mode 100644
index 34783ca01b..0000000000
--- a/libraries/ilbc/ilbc.SlackBuild
+++ /dev/null
@@ -1,103 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for ilbc
-
-# Copyright 2008 Mauro Giachero (mauro dot giachero at gmail dot com)
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PRGNAM=ilbc
-VERSION=${VERSION:-rfc3951}
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) ARCH=i486 ;;
-    arm*) ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) ARCH=$( uname -m ) ;;
-  esac
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-set -e
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-$VERSION
-# Code extraction is peculiar...
-sh $CWD/extract-code.sh $PRGNAM-$VERSION < $CWD/$VERSION.txt
-cp $CWD/configure $PRGNAM-$VERSION
-cd $PRGNAM-$VERSION
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-chmod 0755 configure
-
-CFLAGS="$SLKCFLAGS" \
-CXXFLAGS="$SLKCFLAGS" \
-./configure
-
-sed -i -e "s|usr/lib|usr/lib$LIBDIRSUFFIX|g"  Makefile
-
-make
-make install DESTDIR=$PKG
-
-( cd $PKG
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \
-    xargs strip --strip-unneeded 2> /dev/null || true
-)
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a COPYING $PKG/usr/doc/$PRGNAM-$VERSION
-for i in $PRGNAM.SlackBuild configure extract-code.sh gips_iLBClicense.pdf ; 
-  do cat $CWD/$i > $PKG/usr/doc/$PRGNAM-$VERSION/$i ;
-done
-chown -R root:root $PKG/usr/doc/
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/libraries/ilbc/ilbc.info b/libraries/ilbc/ilbc.info
deleted file mode 100644
index 24518efd9c..0000000000
--- a/libraries/ilbc/ilbc.info
+++ /dev/null
@@ -1,10 +0,0 @@
-PRGNAM="ilbc"
-VERSION="rfc3951"
-HOMEPAGE="http://www.ilbcfreeware.org/"
-DOWNLOAD="http://www.ietf.org/rfc/rfc3951.txt"
-MD5SUM="984affd9bf2053064d744a2ccec82289"
-DOWNLOAD_x86_64=""
-MD5SUM_x86_64=""
-REQUIRES=""
-MAINTAINER="David Woodfall"
-EMAIL="dave@dawoodfall.net"
diff --git a/libraries/ilbc/slack-desc b/libraries/ilbc/slack-desc
deleted file mode 100644
index a6c0a2801d..0000000000
--- a/libraries/ilbc/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-    |-----handy-ruler------------------------------------------------------|
-ilbc: iLBC (internet Low Bitrate Codec) 
-ilbc:
-ilbc: iLBC is a speech codec suitable for robust voice communication over 
-ilbc: IP, and is designed for narrow band speech.  The iLBC codec enables 
-ilbc: graceful speech quality degradation in the case of lost frames, which
-ilbc: occurs in connection with lost or delayed IP packets.
-ilbc: iLBC is free for non-commercial use. Please read the full license
-ilbc: for details and how to use iLBC in commercial applications.
-ilbc:
-ilbc: Homepage: http://www.ilbcfreeware.org/
-ilbc: