summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorWilly Sudiarto Raharjo <willysr@slackbuilds.org>2017-02-11 05:54:33 +0700
committerWilly Sudiarto Raharjo <willysr@slackbuilds.org>2017-02-11 05:54:33 +0700
commit8b06bd281335db9274ecd6b26e36529bb7baffb7 (patch)
tree159ec0dbd32c82ea7b3973d57b976bfa17bdc2f0
parentcbd770a7a6c0638c46ff8dbecd8b3302a9112f83 (diff)
downloadslackbuilds-8b06bd281335db9274ecd6b26e36529bb7baffb7.tar.gz
network/tor: Update torrc sample file.
Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>
-rw-r--r--network/tor/torrc140
1 files changed, 88 insertions, 52 deletions
diff --git a/network/tor/torrc b/network/tor/torrc
index 83d5bf22b4..d1ada4682d 100644
--- a/network/tor/torrc
+++ b/network/tor/torrc
@@ -1,32 +1,35 @@
## Configuration file for a typical Tor user
-## Last updated 16 July 2009 for Tor 0.2.2.1-alpha.
-## (May or may not work for much older or much newer versions of Tor.)
+## Last updated 22 September 2015 for Tor 0.2.7.3-alpha.
+## (may or may not work for much older or much newer versions of Tor.)
##
## Lines that begin with "## " try to explain what's going on. Lines
## that begin with just "#" are disabled commands: you can enable them
## by removing the "#" symbol.
##
-## See 'man tor', or https://www.torproject.org/tor-manual.html,
+## See 'man tor', or https://www.torproject.org/docs/tor-manual.html,
## for more options you can use in this file.
##
## Tor will look for this file in various places based on your platform:
-## https://wiki.torproject.org/noreply/TheOnionRouter/TorFAQ#torrc
+## https://www.torproject.org/docs/faq#torrc
##
## This is a custom Slackware torrc. The original Tor Project torrc file is
-## still available as /etc/torrc/torrc.sample
+## still available as /etc/tor/torrc.sample
-
-## Replace this with "SocksPort 0" if you plan to run Tor only as a
-## relay, and not make any local application connections yourself.
-SocksPort 9050 # what port to open for local application connections
-SocksListenAddress 127.0.0.1 # accept connections only from localhost
-#SocksListenAddress 192.168.0.1:9100 # listen on this IP:port also
+## Tor opens a SOCKS proxy on port 9050 by default -- even if you don't
+## configure one below. Set "SOCKSPort 0" if you plan to run Tor only
+## as a relay, and not make any local application connections yourself.
+#SOCKSPort 9050 # Default: Bind to localhost:9050 for local connections.
+SOCKSPort 127.0.0.1:9050 # what port to open for local application connections
+#SOCKSPort 192.168.0.1:9100 # Bind to this address:port too.
## Entry policies to allow/deny SOCKS requests based on IP address.
-## First entry that matches wins. If no SocksPolicy is set, we accept
-## all (and only) requests from SocksListenAddress.
-#SocksPolicy accept 192.168.0.0/16
-#SocksPolicy reject *
+## First entry that matches wins. If no SOCKSPolicy is set, we accept
+## all (and only) requests that reach a SOCKSPort. Untrusted users who
+## can access your SOCKSPort may be able to learn about the connections
+## you make.
+#SOCKSPolicy accept 192.168.0.0/16
+#SOCKSPolicy accept6 FC00::/7
+#SOCKSPolicy reject *
## Logs go to stdout at level "notice" unless redirected by something
## else, like one of the below lines. You can have as many Log lines as
@@ -35,7 +38,6 @@ SocksListenAddress 127.0.0.1 # accept connections only from localhost
## We advise using "notice" in most cases, since anything more verbose
## may provide sensitive information to an attacker who obtains the logs.
##
-
## Send all messages of level 'notice' or higher to /var/log/tor/tor.log
Log notice file /var/log/tor/tor.log
## Send every possible message to /var/log/tor/debug.log
@@ -91,53 +93,67 @@ PidFile /var/run/tor/tor.pid
## Required: what port to advertise for incoming Tor connections.
#ORPort 9001
-## If you want to listen on a port other than the one advertised
-## in ORPort (e.g. to advertise 443 but bind to 9090), uncomment the
-## line below too. You'll need to do ipchains or other port forwarding
+## If you want to listen on a port other than the one advertised in
+## ORPort (e.g. to advertise 443 but bind to 9090), you can do it as
+## follows. You'll need to do ipchains or other port forwarding
## yourself to make this work.
-#ORListenAddress 0.0.0.0:9090
+#ORPort 443 NoListen
+#ORPort 127.0.0.1:9090 NoAdvertise
+
+## The IP address or full DNS name for incoming connections to your
+## relay. Leave commented out and Tor will guess.
+#Address noname.example.com
+
+## If you have multiple network interfaces, you can specify one for
+## outgoing traffic to use.
+# OutboundBindAddress 10.0.0.5
## A handle for your relay, so people don't have to refer to it by key.
+## Nicknames must be between 1 and 19 characters inclusive, and must
+## contain only the characters [a-zA-Z0-9].
#Nickname ididnteditheconfig
-## The IP address or full DNS name for your relay. Leave commented out
-## and Tor will guess.
-#Address noname.example.com
-
## Define these to limit how much relayed traffic you will allow. Your
## own traffic is still unthrottled. Note that RelayBandwidthRate must
-## be at least 20 KB.
-#RelayBandwidthRate 100 KB # Throttle traffic to 100KB/s (800Kbps)
-#RelayBandwidthBurst 200 KB # But allow bursts up to 200KB/s (1600Kbps)
+## be at least 75 kilobytes per second.
+## Note that units for these config options are bytes (per second), not
+## bits (per second), and that prefixes are binary prefixes, i.e. 2^10,
+## 2^20, etc.
+#RelayBandwidthRate 100 KBytes # Throttle traffic to 100KB/s (800Kbps)
+#RelayBandwidthBurst 200 KBytes # But allow bursts up to 200KB (1600Kb)
## Use these to restrict the maximum traffic per day, week, or month.
-## Note that this threshold applies to sent _and_ to received bytes,
-## not to their sum: Setting "4 GB" may allow up to 8 GB
-## total before hibernating.
+## Note that this threshold applies separately to sent and received bytes,
+## not to their sum: setting "40 GB" may allow up to 80 GB total before
+## hibernating.
##
-## Set a maximum of 4 gigabytes each way per period.
-#AccountingMax 4 GB
+## Set a maximum of 40 gigabytes each way per period.
+#AccountingMax 40 GBytes
## Each period starts daily at midnight (AccountingMax is per day)
#AccountingStart day 00:00
## Each period starts on the 3rd of the month at 15:00 (AccountingMax
## is per month)
#AccountingStart month 3 15:00
-## Contact info to be published in the directory, so we can contact you
-## if your relay is misconfigured or something else goes wrong. Google
-## indexes this, so spammers might also collect it.
+## Administrative contact information for this relay or bridge. This line
+## can be used to contact you if your relay or bridge is misconfigured or
+## something else goes wrong. Note that we archive and publish all
+## descriptors containing these lines and that Google indexes them, so
+## spammers might also collect them. You may want to obscure the fact that
+## it's an email address and/or generate a new address for this purpose.
#ContactInfo Random Person <nobody AT example dot com>
## You might also include your PGP or GPG fingerprint if you have one:
-#ContactInfo 1234D/FFFFFFFF Random Person <nobody AT example dot com>
+#ContactInfo 0xFFFFFFFF Random Person <nobody AT example dot com>
## Uncomment this to mirror directory information for others. Please do
## if you have enough bandwidth.
#DirPort 9030 # what port to advertise for directory connections
-## If you want to listen on a port other than the one advertised
-## in DirPort (e.g. to advertise 80 but bind to 9091), uncomment the line
-## below too. You'll need to do ipchains or other port forwarding yourself
-## to make this work.
-#DirListenAddress 0.0.0.0:9091
+## If you want to listen on a port other than the one advertised in
+## DirPort (e.g. to advertise 80 but bind to 9091), you can do it as
+## follows. below too. You'll need to do ipchains or other port
+## forwarding yourself to make this work.
+#DirPort 80 NoListen
+#DirPort 127.0.0.1:9091 NoAdvertise
## Uncomment to return an arbitrary blob of html on your DirPort. Now you
## can explain what Tor is if anybody wonders why your IP address is
## contacting them. See contrib/tor-exit-notice.html in Tor's source
@@ -148,14 +164,22 @@ PidFile /var/run/tor/tor.pid
## key fingerprint of each Tor relay you control, even if they're on
## different networks. You declare it here so Tor clients can avoid
## using more than one of your relays in a single circuit. See
-## https://wiki.torproject.org/noreply/TheOnionRouter/TorFAQ#MultipleServers
+## https://www.torproject.org/docs/faq#MultipleRelays
+## However, you should never include a bridge's fingerprint here, as it would
+## break its concealability and potentially reveal its IP/TCP address.
#MyFamily $keyid,$keyid,...
## A comma-separated list of exit policies. They're considered first
-## to last, and the first match wins. If you want to _replace_
-## the default exit policy, end this with either a reject *:* or an
-## accept *:*. Otherwise, you're _augmenting_ (prepending to) the
-## default exit policy. Leave commented to just use the default, which is
+## to last, and the first match wins.
+##
+## If you want to allow the same ports on IPv4 and IPv6, write your rules
+## using accept/reject *. If you want to allow different ports on IPv4 and
+## IPv6, write your IPv6 rules using accept6/reject6 *6, and your IPv4 rules
+## using accept/reject *4.
+##
+## If you want to _replace_ the default exit policy, end this with either a
+## reject *:* or an accept *:*. Otherwise, you're _augmenting_ (prepending to)
+## the default exit policy. Leave commented to just use the default, which is
## described in the man page or at
## https://www.torproject.org/documentation.html
##
@@ -166,16 +190,28 @@ PidFile /var/run/tor/tor.pid
## you should update your exit policy to reflect this -- otherwise Tor
## users will be told that those destinations are down.
##
-#ExitPolicy accept *:6660-6667,reject *:* # allow irc ports but no more
-#ExitPolicy accept *:119 # accept nntp as well as default exit policy
+## For security, by default Tor rejects connections to private (local)
+## networks, including to the configured primary public IPv4 and IPv6 addresses,
+## and any public IPv4 and IPv6 addresses on any interface on the relay.
+## See the man page entry for ExitPolicyRejectPrivate if you want to allow
+## "exit enclaving".
+##
+#ExitPolicy accept *:6660-6667,reject *:* # allow irc ports on IPv4 and IPv6 but no more
+#ExitPolicy accept *:119 # accept nntp ports on IPv4 and IPv6 as well as default exit policy
+#ExitPolicy accept *4:119 # accept nntp ports on IPv4 only as well as default exit policy
+#ExitPolicy accept6 *6:119 # accept nntp ports on IPv6 only as well as default exit policy
#ExitPolicy reject *:* # no exits allowed
-#
+
## Bridge relays (or "bridges") are Tor relays that aren't listed in the
-## main directory. Since there is no complete public list of them, even if an
-## ISP is filtering connections to all the known Tor relays, they probably
+## main directory. Since there is no complete public list of them, even an
+## ISP that filters connections to all the known Tor relays probably
## won't be able to block all the bridges. Also, websites won't treat you
## differently because they won't know you're running Tor. If you can
## be a real relay, please do; but if not, be a bridge!
#BridgeRelay 1
-#ExitPolicy reject *:*
+## By default, Tor will advertise your bridge to users through various
+## mechanisms like https://bridges.torproject.org/. If you want to run
+## a private bridge, for example because you'll give out your bridge
+## address manually to your friends, uncomment this line:
+#PublishServerDescriptor 0