system/runit: Updated for version 2.1.2 + new maintainer.

Signed-off-by: David Spencer <idlemoor@slackbuilds.org>

4 files changed, 99 insertions, 28 deletions

diff --git a/system/runit/README b/system/runit/README
index 8182586e4d..a48d34bcc1 100644
--- a/system/runit/README
+++ b/system/runit/README
@@ -1,7 +1,60 @@
 runit (a UNIX init scheme with service supervision)
 
-a cross-platform Unix init scheme with service supervision, a
-replacement for sysvinit, and other init schemes.
+A cross-platform Unix init scheme with service supervision, a replacement for
+sysvinit, and other init schemes.
 
-runit can replace init or its service supervision can be used with 
-traditional init.  runit is compatible with djb's daemontools
+runit can replace init or its service supervision can be used with traditional
+init.  runit is compatible with djb's daemontools.
+
+By default, this slackbuild sets-up a basic configuration to replace init with
+runit. To disable this, pass CONFIG=no to the script.
+
+To use runit with init, just call it
+  /sbin/runsvdir-start &
+
+To replace init with runit, reboot and enter init=/sbin/runit-init in the Lilo
+prompt.
+
+Alternatively, if you do not have a multi boot system, you may append this line
+in /etc/lilo.conf
+
+E.g:
+  append="vt.default_utf8=0 init=/sbin/runit-init"
+
+Then run lilo:
+  # lilo -v
+
+Or just replace /sbin/init with /sbin/runit-init
+  # mv /sbin/init /sbin/init.sysv
+  # cp /sbin/runit-init /sbin/init
+Be warned that if you had booted with the original init, the system may refuse
+to reboot, therefore boot from runit-init first.
+
+To migrate a service to runit, switch it off and disable it as usual, place
+an initialisation script called run under a suitably named directory under
+/etc/sv/ and symlink it to /service.
+
+E.g.:
+  # /etc/rc.d/rc.networkmanager stop
+  # chmod -x /etc/rc.d/rc.networkmanager
+  # mkdir /etc/sv/networkmanager/
+
+Write a script to start the service in /etc/sv/networkmanager/run such as
+  #!/bin/sh
+  exec NetworkManager -n > /dev/null 2>&1
+
+Give it executable permission:
+  # chmod +x  /etc/sv/networkmanager/run
+
+Link it to /service and NetworkManager will start in a few seconds and enabled
+under current runlevel
+  # ln -s /etc/sv/networkmanager /service
+
+Hint:
+To Reboot:
+  # runit-init 6
+To Halt:
+  # runit-init 0
+
+A /usr/sbin/shutdown shell script has been included with the configuration
+files if you enabled them.
diff --git a/system/runit/config.tar b/system/runit/config.tar
new file mode 100644
index 0000000000..342cc163ce
--- /dev/null
+++ b/system/runit/config.tar
diff --git a/system/runit/runit.SlackBuild b/system/runit/runit.SlackBuild
index f9b83ed6fd..f9b9be5823 100644
--- a/system/runit/runit.SlackBuild
+++ b/system/runit/runit.SlackBuild
@@ -2,64 +2,83 @@
 # slackware package build script for runit
 
 # written by David Miller dave at frop dot net
+# 2018, updated by Chris Abela, Malta, <kristofru@gmail.com>
 
 PRGNAM=runit
-VERSION=${VERSION:-2.1.1}
+VERSION=${VERSION:-2.1.2}
 BUILD=${BUILD:-1}
 TAG=${TAG:-_SBo}
 
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    i?86) ARCH=i486 ;;
+    i?86) ARCH=i586 ;;
     arm*) ARCH=arm ;;
        *) ARCH=$( uname -m ) ;;
   esac
 fi
 
+set -e
+
 CWD=$(pwd)
 TMP=${TMP:-/tmp/SBo}
 PKG=$TMP/package-$PRGNAM
 OUTPUT=${OUTPUT:-/tmp}
 
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
 elif [ "$ARCH" = "i686" ]; then
   SLKCFLAGS="-O2 -march=i686 -mtune=i686"
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
+else
+  SLKCFLAGS="-O2"
 fi
 
-set -e
-
 rm -rf $PKG
 mkdir -p $TMP $PKG $OUTPUT
 cd $TMP
 rm -rf $PRGNAM-$VERSION
-tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
-
-mv admin/$PRGNAM-$VERSION $PRGNAM-$VERSION
-rmdir admin
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz --strip-components=1
 cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
 
 echo gcc $SLKCFLAGS -Wall > src/conf-cc
 
 package/compile
 package/check
 
-install -d $PKG/usr/bin
-install -m 755 command/* $PKG/usr/bin
-install -D -m0750 etc/2 $PKG/sbin/runsvdir-start
+install -d $PKG/{sbin,usr/bin}
+install -m 755 command/{runit*,utmpset} $PKG/sbin
+install -m 755 command/{chpst,runsv*,sv*} $PKG/usr/bin
+install -m 750 etc/2 $PKG/sbin/runsvdir-start
 
 install -d $PKG/usr/man/man8
 install -m 644 man/* $PKG/usr/man/man8
 
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
 
-( cd $PKG/usr/man
-  find . -type f -exec gzip -9 {} \;
-  for i in $( find . -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
-)
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+# Proceed with the configuration files. By default we install them.
+if [ "${CONFIG:-yes}" != "no" ]; then
+  # Set up the configuration files
+  tar xvf $CWD/config.tar -C $PKG/ --no-same-owner
+  # Set up the runlevels
+  mkdir -p $PKG/etc/runit/runsvdir/{default,single}/
+  ln -s /etc/sv/agetty-tty1 $PKG/etc/runit/runsvdir/single/
+  ln -s default $PKG/etc/runit/runsvdir/current
+  for N in 1 2 3 4 5 6; do
+    ln -s /etc/sv/agetty-tty${N} $PKG/etc/runit/runsvdir/default/
+  done
+  ln -s /etc/runit/runsvdir/current $PKG/service
+fi
 
 mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
 cp -a package/CHANGES package/README package/TODO package/COPYING package/THANKS \
@@ -71,4 +90,3 @@ cat $CWD/slack-desc > $PKG/install/slack-desc
 
 cd $PKG
 /sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
-
diff --git a/system/runit/runit.info b/system/runit/runit.info
index f0c93f3b19..0af0d7fc8f 100644
--- a/system/runit/runit.info
+++ b/system/runit/runit.info
@@ -1,10 +1,10 @@
 PRGNAM="runit"
-VERSION="2.1.1"
+VERSION="2.1.2"
 HOMEPAGE="http://smarden.org/runit/"
-DOWNLOAD="http://smarden.org/runit/runit-2.1.1.tar.gz"
-MD5SUM="8fa53ea8f71d88da9503f62793336bc3"
+DOWNLOAD="http://smarden.org/runit/runit-2.1.2.tar.gz"
+MD5SUM="6c985fbfe3a34608eb3c53dc719172c4"
 DOWNLOAD_x86_64=""
 MD5SUM_x86_64=""
 REQUIRES=""
-MAINTAINER="David Miller"
-EMAIL="dave@frop.net"
+MAINTAINER="Chris Abela"
+EMAIL="kristofru@gmail.com"