system/socklog: Added (system and kernel logging services).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

6 files changed, 263 insertions, 0 deletions

diff --git a/system/socklog/README b/system/socklog/README
new file mode 100644
index 0000000000..808c505ff3
--- /dev/null
+++ b/system/socklog/README
@@ -0,0 +1,12 @@
+socklog, in cooperation with the runit package, is a small and secure replacement for syslogd.
+
+It can receive syslog messages from a unix domain socket ("/dev/log") and
+write them to various files on disk depending on facility and priority.
+
+It can receive messages from a udp socket ("0.0.0.0:514") and write them to
+disk, or forward the messages to another udp socket ("a.b.c.d:514").
+
+svlogd has a built in log file rotation based on file size, 
+so there is no need for any cron jobs or similar to rotate the logs.
+
+Check README.Slackware on how to use it after installation.
diff --git a/system/socklog/README.Slackware b/system/socklog/README.Slackware
new file mode 100644
index 0000000000..4cc0c2b4d8
--- /dev/null
+++ b/system/socklog/README.Slackware
@@ -0,0 +1,55 @@
+To use the socklog package for system logging, following steps can be followed:
+
+Create the service directory and log directories by running the socklog-conf program:
+
+  # socklog-conf unix daemon adm
+
+If you are replacing another service providing system logging through the socket /dev/log,
+ such as syslogd, stop it now and ensure that it will not be restarted on runlevel change
+ or system reboot.
+
+Tell runsvdir about the new service:
+
+  # ln -s /etc/sv/socklog-unix /var/service/
+
+Wait five seconds for the service to start and then check the log directories, e.g.:
+
+  # less /var/log/socklog/main/current
+
+ Optionally configure the socklog-unix service by editing the corresponding run scripts and config files:
+
+    /var/service/socklog-unix/run
+    /var/service/socklog-unix/log/run
+    /var/log/socklog/*/config
+
+-------------------------------------
+
+For capturing kernel log:
+
+Create the service directory and log directories by running the socklog-conf program:
+
+  # socklog-conf klog daemon adm
+
+If you are replacing another service providing kernel logging, such as klogd on Linux or syslogd on BSD,
+ stop it now and ensure that it will not be restarted on runlevel change or system reboot.
+
+Tell runsvdir about the new service:
+
+  # ln -s /etc/sv/socklog-klog /var/service/
+
+Wait five seconds for the service to start and then check the log directory:
+
+  # less /var/log/socklog-klog/main/current
+
+Optionally configure the socklog-klog service by editing the corresponding run scripts and config file:
+
+    /var/service/socklog-klog/run
+    /var/service/socklog-klog/log/run
+    /var/log/socklog-klog/config
+
+----------------------------------------
+
+For more details and setting up network logging, check the following link:
+
+http://smarden.org/socklog/configuration.html
+
diff --git a/system/socklog/headers.patch b/system/socklog/headers.patch
new file mode 100644
index 0000000000..6f7ec5ace7
--- /dev/null
+++ b/system/socklog/headers.patch
@@ -0,0 +1,55 @@
+add missing headers for misc funcs and types
+
+--- a/chkshsgr.c
++++ b/chkshsgr.c
+@@ -1,10 +1,11 @@
+ /* Public domain. */
+ 
+ #include <unistd.h>
++#include <grp.h>
+ 
+ int main()
+ {
+-  short x[4];
++  gid_t x[4];
+ 
+   x[0] = x[1] = 0;
+   if (getgroups(1,x) == 0) if (setgroups(1,x) == -1) _exit(1);
+--- a/pathexec_run.c
++++ b/pathexec_run.c
+@@ -1,5 +1,6 @@
+ /* Public domain. */
+ 
++#include <unistd.h>
+ #include "error.h"
+ #include "stralloc.h"
+ #include "str.h"
+--- a/prot.c
++++ b/prot.c
+@@ -1,12 +1,15 @@
+ /* Public domain. */
+ 
++#include <unistd.h>
++#include <grp.h>
++
+ #include "hasshsgr.h"
+ #include "prot.h"
+ 
+ int prot_gid(int gid)
+ {
+ #ifdef HASSHORTSETGROUPS
+-  short x[2];
++  gid_t x[2];
+   x[0] = gid; x[1] = 73; /* catch errors */
+   if (setgroups(1,x) == -1) return -1;
+ #else
+--- a/seek_set.c
++++ b/seek_set.c
+@@ -1,5 +1,6 @@
+ /* Public domain. */
+ 
++#include <unistd.h>
+ #include <sys/types.h>
+ #include "seek.h"
+ 
+
diff --git a/system/socklog/slack-desc b/system/socklog/slack-desc
new file mode 100644
index 0000000000..cd8b5f1d3e
--- /dev/null
+++ b/system/socklog/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+socklog: socklog (system and kernel logging services)
+socklog:
+socklog: socklog, in cooperation with the runit package, is a small and secure
+socklog: replacement for syslogd.
+socklog:
+socklog: It can receive syslog messages from a unix domain socket ("/dev/log")
+socklog: and write them to various files on disk depending on facility
+socklog: and priority. It can also read from and write to a udp socket.
+socklog:
+socklog: svlogd has a built in log file rotation based on file size,
+socklog:  so there is no need for any cron jobs or similar to rotate the logs.
diff --git a/system/socklog/socklog.SlackBuild b/system/socklog/socklog.SlackBuild
new file mode 100644
index 0000000000..a58f15fac8
--- /dev/null
+++ b/system/socklog/socklog.SlackBuild
@@ -0,0 +1,112 @@
+#!/bin/sh
+
+# Slackware build script for socklog
+# generated with mkslack, based on aur and gentoo pkg
+#
+# Copyright 2019 Aaditya Bagga <aaditya_gnulinux@zoho.com>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=socklog
+VERSION=${VERSION:-2.1.0}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz --strip-components=1
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+ -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+echo "${CC:-gcc} $SLKCFLAGS -Wall" > src/conf-cc
+echo "${LD:-gcc -s}" > src/conf-ld
+
+cd src
+patch -p1 < "$CWD/headers.patch"
+cd -
+sed -i -e 's:^#define _PATH_KLOG "\/dev\/klog"$:#define _PATH_KLOG "\/proc\/kmsg":' src/socklog-conf.c
+
+package/compile
+package/check
+
+install -d $PKG/{bin,sbin}
+install -m 755 command/{tryto,uncat,socklog-check} $PKG/bin/
+install -m 755 command/{socklog,socklog-conf} $PKG/sbin/
+
+install -d $PKG/usr/man/man{1,8}
+install -m 644 man/*.1 $PKG/usr/man/man1/
+install -m 644 man/*.8 $PKG/usr/man/man8/
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a \
+  package/CHANGES package/README package/COPYING \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+
+mkdir $PKG/usr/doc/$PRGNAM-$VERSION/html
+cp doc/* $PKG/usr/doc/$PRGNAM-$VERSION/html/
+
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/system/socklog/socklog.info b/system/socklog/socklog.info
new file mode 100644
index 0000000000..40788fe0be
--- /dev/null
+++ b/system/socklog/socklog.info
@@ -0,0 +1,10 @@
+PRGNAM="socklog"
+VERSION="2.1.0"
+HOMEPAGE="http://smarden.org/socklog/"
+DOWNLOAD="http://smarden.org/socklog/socklog-2.1.0.tar.gz"
+MD5SUM="5d0e8e28c9329ad3af982c5241df9ff1"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES="runit"
+MAINTAINER="Aaditya Bagga"
+EMAIL="aaditya_gnulinux@zoho.com"