multimedia/MPlayer: Initial import

7 files changed, 313 insertions, 0 deletions

diff --git a/multimedia/MPlayer/MPlayer.SlackBuild b/multimedia/MPlayer/MPlayer.SlackBuild
new file mode 100644
index 0000000000..73cc7e266e
--- /dev/null
+++ b/multimedia/MPlayer/MPlayer.SlackBuild
@@ -0,0 +1,174 @@
+#!/bin/sh
+
+# Slackware build script for MPlayer
+
+# Copyright 2006-2007  Robby Workman  (http://rlworkman.net)
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Thanks to Niki Kovaks for some suggestions on this 
+# Thanks to Eric Hameleers for suggestions (and some code examples) :)
+
+PRGNAM=MPlayer
+VERSION=1.0rc1	
+PKGVERSION=$VERSION	# This may change later in the script
+ARCH=${ARCH:-custom}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+# If you installed the codecs package according to the instructions at
+# the MPlayer website, you'll probably want to change this variable
+# to /usr/local/lib/codecs.  Otherwise, you'll want to leave it alone
+# (if you installed the codecs using our SlackBuild script for them)
+# unless you placed the codecs in a non-standard location.
+CODECSDIR=${CODECSDIR:-/usr/lib/codecs}
+
+# The default MPlayer theme is Blue
+# http://www.mplayerhq.hu/MPlayer/skins/Blue-1.7.tar.bz2
+# Others may work fine here, but the script has not been tested with them
+# Even so, it's probably better to leave this alone and install additional
+# themes to $HOME/.mplayer/skins/
+THEME=Blue
+THEME_VERSION=1.7
+
+# The fonts listed below should exist on a stock Slackware 11.0 system.
+# If you want to change the default font after installation, that is probably 
+# best done by making a link to your preferred font in $HOME/.mplayer/ by:
+#   cd $HOME/.mplayer
+#   ln -s /path/to/preferred/font subfont.ttf 
+OSDFONTS="Arialuni.ttf arial.ttf DejaVuSans.ttf Vera.ttf"
+
+# This will build documentation for all languages - if you don't want some
+# of the, either change this or pass what you do want on the command line
+# when running the script:  LANGUAGES=en ./MPlayer.SlackBuild 
+LANGUAGES=${LANGUAGES:-"en nl fr de es"}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP || exit 1
+rm -rf $PRGNAM-$VERSION
+tar -xjvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1
+cd $PRGNAM-$VERSION || exit 1
+chown -R root:root .
+chmod -R a-s,u+rw,go+r-w .
+
+# Fix a security problem and increment package version to try2
+# http://www.debian.org/security/2006/dsa-1244
+patch -p0 < $CWD/asmrules_fix_20061231.diff || exit 1
+PKGVERSION=${VERSION}try2
+
+# Fix a security problem and increment package version to try3
+# http://secunia.com/product/2255/
+# http://svn.mplayerhq.hu/mplayer/trunk/stream/stream_cddb.c?r1=23287&r2=23470&diff_format=u
+patch -p1 < $CWD/stream.cddb_fix_20070606.diff || exit 1
+PKGVERSION=${VERSION}try3
+
+# The MPlayer developers will not support and/or deal with bug reports
+# if you don't allow it to automatically determine compiler flags,
+# so modify this at your own risk
+CFLAGS= \
+./configure \
+  --prefix=/usr \
+  --confdir=/etc/mplayer \
+  --enable-gui \
+  --enable-menu \
+  --enable-runtime-cpudetection \
+  --enable-largefiles \
+  --with-codecsdir="$CODECSDIR" \
+  --language="$LANGUAGES" \
+  || exit 1
+
+make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+( cd $PKG/usr/man
+  find . -type f -exec gzip -9 {} \;
+  for i in $( find . -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+)
+
+mkdir -p $PKG/usr/share/mplayer/skins
+if [ -r $CWD/$THEME-$THEME_VERSION.tar.bz2 ]; then
+  ( cd $PKG/usr/share/mplayer/skins
+    tar -xjf $CWD/$THEME-$THEME_VERSION.tar.bz2
+    ln -s $THEME default
+  ) || exit 1
+else
+  echo A usable theme tarball does not appear to exist in $CWD
+  echo \(or you didn't edit the script to reflect it, or something
+  echo else is broken\)
+  echo The script will continue to build a package, but some manual
+  echo setup may be required after installation.
+  echo
+  echo Type \'exit\' to quit or any other key to continue the script.
+  read _continue
+  if [ "$_continue" = "exit" ]; then
+      exit 1
+  fi
+fi
+
+# Fix path to icon in desktop file so that the icon will display in kde
+sed -i 's%Icon=mplayer.xpm%Icon=/usr/share/pixmaps/mplayer.xpm%' \
+  $PKG/usr/share/applications/mplayer.desktop || exit 1
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a AUTHORS ChangeLog Copyright LICENSE README DOCS/* \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+# Don't clobber an existing config file
+cat etc/example.conf > $PKG/etc/mplayer/mplayer.conf.new
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+# We'll link to one of the standard ttf fonts defined above
+# Thanks to Eric Hameleers for this code snippet
+cat << EOF >> $PKG/install/doinst.sh
+# Symlink a default TrueType font for OSD:
+if [ ! -f usr/share/mplayer/subfont.ttf ]; then
+  for font in $OSDFONTS ; do
+    if [ -f usr/X11R6/lib/X11/fonts/TTF/\$font ]; then
+      ( cd usr/share/mplayer 
+        ln -fs /usr/X11R6/lib/X11/fonts/TTF/\$font subfont.ttf 
+      )
+      break
+    fi
+  done
+fi
+EOF
+
+cd $PKG
+chown -R root:root .	# Some files in /usr/share/mplayer are 103:99
+/sbin/makepkg -l y -c n -p $OUTPUT/$PRGNAM-$PKGVERSION-$ARCH-$BUILD$TAG.tgz
diff --git a/multimedia/MPlayer/MPlayer.info b/multimedia/MPlayer/MPlayer.info
new file mode 100644
index 0000000000..8e4d67d754
--- /dev/null
+++ b/multimedia/MPlayer/MPlayer.info
@@ -0,0 +1,8 @@
+PRGNAM="MPlayer"
+VERSION="1.0rc1"
+HOMEPAGE="http://www.mplayerhq.hu/"
+DOWNLOAD="http://www4.mplayerhq.hu/MPlayer/releases/MPlayer-1.0rc1.tar.bz2"
+MD5SUM="18c05d88e22c3b815a43ca8d7152ccdc"
+MAINTAINER="Robby Workman"
+EMAIL="rw@rlworkman.net"
+APPROVED="BP{k}"
diff --git a/multimedia/MPlayer/README b/multimedia/MPlayer/README
new file mode 100644
index 0000000000..5262a0feab
--- /dev/null
+++ b/multimedia/MPlayer/README
@@ -0,0 +1,19 @@
+MPlayer plays most MPEG, VOB, AVI, OGG/OGM, VIVO, ASF/WMA/WMV, QT/MOV/MP4, 
+FLI, RM, NuppelVideo, YUV4MPEG, FILM, RoQ, PVA files, supported by many 
+native, XAnim, and Win32 DLL codecs. You can watch VideoCD, SVCD, DVD, 3ivx, 
+DivX 3/4/5 and even WMV movies, too (without the avifile library). 
+ 
+The required codecs are available from the MPlayer site, and we have a 
+SlackBuild script for them as well.  If you have already installed the
+codecs on your own, then make sure the CODECSDIR variable in the script
+is defined correctly (or pass the correct value on the command line when
+running the SlackBuild script).
+
+This script is written to install the default "Blue" theme for MPlayer, and
+it will print an error (but allow you to continue) if you don't have the
+theme tarball in the build directory.  You can obtain the Blue theme here:
+http://www.mplayerhq.hu/MPlayer/skins/Blue-1.7.tar.bz2
+If you want to install some other theme, the script is written to support
+that, but other themes have not been tested with it.  The best option for
+using additional themes/skins is to install them in $HOME/.mplayer by 
+following the directions on the MPlayer homepage.
diff --git a/multimedia/MPlayer/asmrules_fix_20061231.diff b/multimedia/MPlayer/asmrules_fix_20061231.diff
new file mode 100644
index 0000000000..87bab25ce1
--- /dev/null
+++ b/multimedia/MPlayer/asmrules_fix_20061231.diff
@@ -0,0 +1,51 @@
+Index: stream/realrtsp/asmrp.c
+===================================================================
+--- stream/realrtsp/asmrp.c	(revision 20381)
++++ stream/realrtsp/asmrp.c	(working copy)
+@@ -40,6 +40,7 @@
+ #include <stdlib.h>
+ #include <stdio.h>
+ #include <string.h>
++#include "asmrp.h"
+ 
+ /*
+ #define LOG
+@@ -645,8 +646,10 @@
+ #ifdef LOG
+       printf ("rule #%d is true\n", rule_num);
+ #endif
+-      matches[num_matches] = rule_num;
+-      num_matches++;
++      if(num_matches < MAX_RULEMATCHES - 1)
++        matches[num_matches++] = rule_num;
++      else
++        printf("Ignoring matched asm rule %d, too many matched rules.\n", rule_num);
+     }
+ 
+     rule_num++;
+Index: stream/realrtsp/real.c
+===================================================================
+--- stream/realrtsp/real.c	(revision 20381)
++++ stream/realrtsp/real.c	(working copy)
+@@ -271,7 +271,7 @@
+     int j=0;
+     int n;
+     char b[64];
+-    int rulematches[16];
++    int rulematches[MAX_RULEMATCHES];
+ 
+ #ifdef LOG
+     printf("calling asmrp_match with:\n%s\n%u\n", desc->stream[i]->asm_rule_book, bandwidth);
+Index: stream/realrtsp/asmrp.h
+===================================================================
+--- stream/realrtsp/asmrp.h	(revision 20381)
++++ stream/realrtsp/asmrp.h	(working copy)
+@@ -40,6 +40,8 @@
+ #ifndef HAVE_ASMRP_H
+ #define HAVE_ASMRP_H
+ 
++#define MAX_RULEMATCHES 16
++
+ int asmrp_match (const char *rules, int bandwidth, int *matches) ;
+ 
+ #endif
diff --git a/multimedia/MPlayer/doinst.sh b/multimedia/MPlayer/doinst.sh
new file mode 100644
index 0000000000..b5c23d46e2
--- /dev/null
+++ b/multimedia/MPlayer/doinst.sh
@@ -0,0 +1,20 @@
+
+config() {
+  NEW="$1"
+  OLD="`dirname $NEW`/`basename $NEW .new`"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/mplayer/mplayer.conf.new
+
+if [ -x usr/bin/update-desktop-database ]; then
+  usr/bin/update-desktop-database -q usr/share/applications
+fi
+
diff --git a/multimedia/MPlayer/slack-desc b/multimedia/MPlayer/slack-desc
new file mode 100644
index 0000000000..53f02b14c2
--- /dev/null
+++ b/multimedia/MPlayer/slack-desc
@@ -0,0 +1,11 @@
+MPlayer: MPlayer Media player for linux
+MPlayer:
+MPlayer: Media player for linux (runs on many other Unices, and non-x86
+MPlayer: CPUs, see the documentation) It plays most MPEG, VOB, AVI, 
+MPlayer: OGG/OGM, VIVO, ASF/WMA/WMV, QT/MOV/MP4, FLI, RM, NuppelVideo,
+MPlayer: YUV4MPEG, FILM, RoQ, PVA files, supported by many native, XAnim, 
+MPlayer: and Win32 DLL codecs. You can watch VideoCD, SVCD, DVD, 3ivx,
+MPlayer: DivX 3/4/5 and even WMV movies, too (without the avifile library).
+MPlayer:
+MPlayer:
+MPlayer:
diff --git a/multimedia/MPlayer/stream.cddb_fix_20070606.diff b/multimedia/MPlayer/stream.cddb_fix_20070606.diff
new file mode 100644
index 0000000000..f9845abeda
--- /dev/null
+++ b/multimedia/MPlayer/stream.cddb_fix_20070606.diff
@@ -0,0 +1,30 @@
+--- trunk/stream/stream_cddb.c	2007/05/10 11:43:39	23287
++++ trunk/stream/stream_cddb.c	2007/06/05 11:13:32	23470
+@@ -377,7 +377,7 @@
+ 
+ 	switch(status) {
+ 		case 210:
+-			ret = sscanf( http_hdr->body, "%d %s %08lx", &status, category, &disc_id);
++			ret = sscanf( http_hdr->body, "%d %99s %08lx", &status, category, &disc_id);
+ 			if( ret!=3 ) {
+ 				mp_msg(MSGT_DEMUX, MSGL_ERR, MSGTR_ParseError);
+ 				return -1;
+@@ -438,7 +438,7 @@
+ 	ptr++;
+ 	// We have a list of exact/inexact matches, so which one do we use?
+ 	// So let's take the first one.
+-	ret = sscanf(ptr, "%s %08lx %s", cddb_data->category, &(cddb_data->disc_id), album_title);
++	ret = sscanf(ptr, "%99s %08lx %99s", cddb_data->category, &(cddb_data->disc_id), album_title);
+ 	if( ret!=3 ) {
+ 		mp_msg(MSGT_DEMUX, MSGL_ERR, MSGTR_ParseError);
+ 		return -1;
+@@ -475,7 +475,7 @@
+ 	switch(status) {
+ 		case 200:
+ 			// Found exact match
+-			ret = sscanf(http_hdr->body, "%d %s %08lx %s", &status, cddb_data->category, &(cddb_data->disc_id), album_title);
++			ret = sscanf(http_hdr->body, "%d %99s %08lx %99s", &status, cddb_data->category, &(cddb_data->disc_id), album_title);
+ 			if( ret!=4 ) {
+ 				mp_msg(MSGT_DEMUX, MSGL_ERR, MSGTR_ParseError);
+ 				return -1;
+