perl/perl-uri-escape: Added (encode/decode unsafe characters / URIs)

Signed-off-by: Robby Workman <rworkman@slackbuilds.org>

4 files changed, 123 insertions, 0 deletions

diff --git a/perl/perl-uri-escape/README b/perl/perl-uri-escape/README
new file mode 100644
index 0000000000..dca239890f
--- /dev/null
+++ b/perl/perl-uri-escape/README
@@ -0,0 +1,3 @@
+perl-uri-escape (URI::Escape) provides functions to percent-encode and
+percent-decode URI strings as defined by RFC 3986. Percent-encoding
+URI's is informally called "URI escaping".
diff --git a/perl/perl-uri-escape/perl-uri-escape.SlackBuild b/perl/perl-uri-escape/perl-uri-escape.SlackBuild
new file mode 100644
index 0000000000..8f97c4a150
--- /dev/null
+++ b/perl/perl-uri-escape/perl-uri-escape.SlackBuild
@@ -0,0 +1,91 @@
+#!/bin/sh
+
+# Slackware build script for perl-uri-escape
+
+# Copyright 2011  LukenShiro, Italy
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=perl-uri-escape
+VERSION=${VERSION:-1.59}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+SRCNAM=URI
+DOCFILES="Changes README"
+
+set -e # Exit on most errors
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $SRCNAM-$VERSION
+tar xvf $CWD/$SRCNAM-$VERSION.tar.gz
+cd $SRCNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+echo "y" | CFLAGS="$SLKCFLAGS" perl Makefile.PL \
+  PREFIX=/usr \
+  INSTALLDIRS=vendor \
+  INSTALLVENDORMAN3DIR=/usr/man/man3
+make
+make test
+make install DESTDIR=$PKG
+
+# Remove perllocal.pod and other special files that don't need to be installed
+find $PKG -name perllocal.pod -o -name ".packlist" -o -name "*.bs" | xargs rm -f || true
+
+# Remove empty directories
+find $PKG -depth -type d -empty -exec rm -rf {} \;
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find . -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a $DOCFILES $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/perl/perl-uri-escape/perl-uri-escape.info b/perl/perl-uri-escape/perl-uri-escape.info
new file mode 100644
index 0000000000..96f6f2541c
--- /dev/null
+++ b/perl/perl-uri-escape/perl-uri-escape.info
@@ -0,0 +1,10 @@
+PRGNAM="perl-uri-escape"
+VERSION="1.59"
+HOMEPAGE="http://search.cpan.org/dist/URI/"
+DOWNLOAD="http://search.cpan.org/CPAN/authors/id/G/GA/GAAS/URI-1.59.tar.gz"
+MD5SUM="fecebf8fa20e2d26ea4a1649c095e96e"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+MAINTAINER="LukenShiro"
+EMAIL="lukenshiro@ngi.it"
+APPROVED="rworkman"
diff --git a/perl/perl-uri-escape/slack-desc b/perl/perl-uri-escape/slack-desc
new file mode 100644
index 0000000000..5ffc52fe21
--- /dev/null
+++ b/perl/perl-uri-escape/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+               |-----handy-ruler--------------------------------------------------|
+perl-uri-escape: perl-uri-escape (Percent-encode/-decode unsafe characters module)
+perl-uri-escape:
+perl-uri-escape: This provides functions to percent-encode and percent-decode
+perl-uri-escape: URI strings as defined by RFC 3986. Percent-encoding URI's is 
+perl-uri-escape: informally called "URI escaping".
+perl-uri-escape:
+perl-uri-escape: Homepage: http://search.cpan.org/dist/URI/
+perl-uri-escape:
+perl-uri-escape:
+perl-uri-escape:
+perl-uri-escape: